Visual Studio >>Trip to Disney

Trip to Disney

Index ‹ Visual Studio ‹ Visual Basic

Previous
- 1
 - Visual Basic >> Permission denied when trying to create Word objectHello,
 
 I have some code that was running fine on NT, but I have since upgraded
 (ie clean install) the machine to 2003 and am getting a permission
 denied error when it hits the line ...
 
 Set objWord = CreateObject("Word.Application")
 
 I am running this from the VB IDe logged in as Administrator, so I'm not
 sure what permissions I need to set. I thought I had permission to do
 anything I liked !!
 
 Using Word97 if that helps. TIA
 
 --
 Alan Silver
 (anything added below this line is nothing to do with me)
 
 ----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
 http://www.newsfeeds.com The #1 Newsgroup Service in the World! >100,000 Newsgroups
 ---= East/West-Coast Server Farms - Total Privacy via Encryption =---
- 2
 - VB Scripts >> Collect Item Return in diffrent order.Hello all,
 
 I'm not the best programer in the world so I was wondering if I could get a
 little help from you all. I'm using VBScript to make a WMI call to the event
 viewer on a 2003 server. The return for the query is great... Code snip.
 
 et colEvents = objWMIService.ExecQuery ("Select * from Win32_NTLogEvent
 WHERE (Logfile = 'System') AND (EventCode = '6005'or EventCode = '6008' or
 EventCode = '1074' or EventCode = '1076') AND (SourceName <> 'W3SVC')")
 
 intCount = 0
 For Each objService in ColEvents
 
 if objService.EventCode = "6005" THEN
 strboottime = objService.Timewritten
 end if
 
 if objService.EventCode = "1074" THEN
 intCount = intCount + 1
 strstoptime = objService.Timewritten
 strdiff = ( DateDiff("s", WMIDateStringToDate(strstoptime),
 WMIDateStringToDate(strboottime)) )
 intdiff = intdiff + strdiff
 WScript.Echo "Down For: " & SecondsToText(strdiff)
 
 This returns....
 
 Down For: 1 Minute, 7 Seconds
 Down For: 1 Minute, 24 Seconds
 Uptime Report For: CSCS-IT-007C
 Microsoft Windows XP Professional 5.1.2600
 Install Date: 12/06/2004 11:28:17
 Last Reboot: 01/11/2005 18:03:23
 Up For: 6 Days, 17 Hours, 45 Minutes, 9 Seconds
 Total Reboots: 2
 Total Down Time: 2 Minutes, 31 Seconds
 
 So far so good, now I want to change how far back data is collection so I
 mode the query to look for timewritten... code snip...
 
 Set dtmStartDate = CreateObject("WbemScripting.SWbemDateTime")
 DateToCheck = Date - 365
 dtmStartDate.SetVarDate DateToCheck, True
 
 Set dtmEndDate = CreateObject("WbemScripting.SWbemDateTime")
 dtmEndDate.SetVarDate Date, True
 WScript.Echo "Start Date: " & dtmStartDate & " End Date: " & dtmEndDate
 
 Set colEvents = objWMIService.ExecQuery ("Select * from Win32_NTLogEvent
 WHERE TimeWritten >= '"&dtmStartDate&"' AND Logfile = 'System' AND (EventCode
 = '6005'or EventCode = '6008' or EventCode = '1074') AND SourceName <>
 'W3SVC'")
 
 The problem I have is the output order is diffrent. Instead of DESC it now
 AESC. I have tried to add ORDER BY TimeWritten but I get an error. Any
 insite on how to change the order would be very helpfull.
 
 Thanks
 David.
- 3
 - Visual Basic [VB] >> mailer questionHello,
 
 I made a mailer program from instructions I found on the web in vb2005.
 
 It works, but doesn't seem to send the mail until I end the program.
 
 Maybe there is some other command I need to get it to send?
 
 Any help appreciated.
 
 I know this is true, because my outgoing mail virus scan pops up when I
 close the program, showing its scanning an outgoing email.
 
 This doesn't happen till I end the program.
 
 After that I get the message in my in box. Not while the program is up,
 even though it says it sent.
 
 Thanks.
 
 Scott
 Dim msg As New MailMessage("info@mysite.com", "scott@mysite.com")
 
 msg.Subject = "My Email Subject"
 
 msg.IsBodyHtml = True
 
 msg.Body = "This is the body of the email message, it can also
 contain HTML code in it"
 
 Dim credential As Net.NetworkCredential = New Net.NetworkCredential
 
 credential.UserName = "info@mysite.com"
 
 credential.Password = "forward"
 
 'Now we 've got everything we need to send the email except an SMTP server.
 To create that just create a new instance of SmtpClient.
 
 Dim client As New Net.Mail.SmtpClient()
 
 'First we need to set up which SMTP server that the SMTP Client needs to use
 
 client.Host = "mail.mysite.com"
 
 client.UseDefaultCredentials = False
 
 client.Credentials = credential
 
 'client.EnableSsl = True
 
 'The first line tells the SMTP client that we are supplying our own
 credentials. The second line sets those credentials to the
 NetworkCredentials we set up earlier. The third line tells the SmtpClient
 that gmail uses SSL for authentication.
 
 'Everything is ready to go now, all that is needed is to send the message.
 Just call the send method supplying the MailMessage we created earlier.
 
 client.Send(msg)
 
 'client.SendAsync("scott@tryols.com", "scott@tyrols.com", "hi", "hi more",
 "")
- 4
 - MFC >> opening a .pdf file...I have a dialog box with a button. In my button click handler I want
 to open a .pdf file. What code would I write inside my handler
 function to accomplish this?
 
 Thanks,
 RABMissouri2006
- 5
 - Visual Basic [VB] >> printing a text file, printdocument1_printpage gets called TWICE for each page?!Ok, so this is driving me mad. For some reason, regardless of the
 value of ev.hasmorepages, the printoducment1_printpage gets called
 twice for every page. So, I print 2 pages of data on one page, with
 the second overlaying the original data. If i set ev.hasmorepages to
 false, essentially telling the printdocument to only print one page,
 it prints one page, with two pages of data, because at the end of the
 _printpage subroutine, even when ev.hasmorepages is false, it runs the
 sub once more. Any help on this would be fantastic, below is my code:
 
 Private Sub PrintDocument1_PrintPage(ByVal sender As System.Object,
 ByVal ev As System.Drawing.Printing.PrintPageEventArgs) Handles
 PrintDocument1.PrintPage
 Dim linesPerPage As Single = 0
 Dim yPos As Single = 0
 Dim count As Integer = 0
 Dim leftMargin As Single = ev.MarginBounds.Left
 Dim topMargin As Single = ev.MarginBounds.Top
 Dim line As String = Nothing
 'ev.HasMorePages = True
 ' Calculate the number of lines per page.
 linesPerPage = (ev.MarginBounds.Height /
 printFont.GetHeight(ev.Graphics)) - 1
 
 ' Print each line of the file.
 'If counterx = False Then
 While count < linesPerPage
 line = streamtoprint.ReadLine()
 If line Is Nothing Then
 Exit While
 End If
 yPos = topMargin + count *
 printFont.GetHeight(ev.Graphics)
 ev.Graphics.DrawString(line, printFont, Brushes.Black,
 leftMargin, yPos, New StringFormat())
 count += 1
 End While
 'End If
 'If counterx = False Then
 'counterx = True
 'ElseIf counterx = True Then
 'counterx = False
 'End If
 ' If more lines exist, print another page.
 If (line IsNot Nothing) Then
 ev.HasMorePages = True
 Else
 ev.HasMorePages = False
 End If
 End Sub
 
 ..........THIS IS WHAT CALLS THE PRINTPAGE....
 streamtoprint = New IO.StreamReader("C:\temp.dat")
 Try
 printFont = New Font("Times New Roman", 10)
 AddHandler PrintDocument1.PrintPage, AddressOf
 Me.PrintDocument1_PrintPage
 PrintDocument1.Print()
 Finally
 streamtoprint.Close()
 IO.File.Delete("C:\temp.dat")
 End Try
 Catch ex As Exception
 MessageBox.Show(ex.Message)
 End Try
 
 Thanks everyone!
- 6
 - Visual Studio C++ >> wsprintf?Having revisited some old code I am reminded of the existence of
 
 wsprintf().
 
 I vaguely remember from the old 16bit days that there was some
 reason to prefer it over the standard C-library function sprintf(),
 but I can't for the life of me remember what it was.
 
 Does it have any advantages these days or is it just there for
 legacy code?
 
 Dave
 --
 David Webber
 Author MOZART the music processor for Windows -
 http://www.mozart.co.uk
 For discussion/support see
 http://www.mozart.co.uk/mzusers/mailinglist.htm
- 7
 - MFC >> CDC::TextOut (or ExtTextOut) background colour troublesHi. I'm displaying some text on a dialog.
 
 CPaintDC dc(this);
 dc.TextOut(rect.left,rect.top,"HELLO");
 
 On initial drawing of the dialog, the text background is white. As soon as a
 control is used, the text background goes grey. Any way to make this not
 change (or set to one colour)?
- 8
 - MFC >> Alternative to 'AfxSetResourceHandle'Hi.
 
 I am localizing my application, and using 'AfxSetResourceHandle'
 function in this way, to load the appropriate resource:
 
 CMyApp::CMyApp()
 {
 switch (GetUserDefaultLangID())
 {
 case MAKELANGID(LANG_ARMENIAN, SUBLANG_DEFAULT):
 ASSERT((m_hResLibrary =
 LoadLibraryEx(TEXT("MyApphye.dll"), NULL,
 LOAD_LIBRARY_AS_DATAFILE)) != NULL);
 break;
 
 case MAKELANGID(LANG_RUSSIAN, SUBLANG_DEFAULT):
 ASSERT((m_hResLibrary =
 LoadLibraryEx(TEXT("MyApprus.dll"), NULL,
 LOAD_LIBRARY_AS_DATAFILE)) != NULL);
 break;
 }
 }
 
 BOOL CMyApp::InitInstance()
 {
 // Set the resource handle to the appropriate resource DLL
 if (m_hResLibrary)
 AfxSetResourceHandle(m_hResLibrary);
 
 return CWinApp::InitInstance();
 }
 
 The problem is that most MFC member functions use
 'AfxGetResourceHandle' function, to obtain the default resource
 library. For example, 'CBitmap::LoadBitmap' doesn't have a parameter
 for instance handle, it uses 'AfxFindResourceHandle'. So do most
 members of other classes. It means, I must create the same bitmap in
 any resource DLL I use, but I don't want to do that. I want to
 translate only localizable resources, the rest ones must reside in the
 EXE. Is it possible to do?
 
 Thanks in advance
 
 Martin
- 9
 - Visual Basic >> Where are the form.frm scroll bars at design timeSome how the design display mode changed and now I have no scroll bars to
 move to different points on the form I'm trying to design. All the other
 windows like code
 windows have scroll bars but not the form windows.
 
 How do I fix this???
 --
 Thank you,
 
 Randy
- 10
 - Visual Basic >> passing a textbox control in parameter listHi, I have an application that has about 3 subroutines that I'd like to use in another application so I decided to move them out into a DLL. Anyway, I moved them out and I call them from the two applications and they all work fine. When I moved them out, I temporarily commented out anything to do with the user interface - basically the routines do some processing of files that sometimes takes a long time so in the original application, the routines would update a little status form
 
 What I'd like to do is popup the status form in each of the two applications and then call the subroutines in the DLL and then have the subroutine update the form. So I decided to add a simple textbox control in the subroutines' parameter list. When I go to compile the DLL I get
 
 Compile error
 Private object modules cannot be used in public object modules as parameters or return types for public procedures, as public data members, or as fields of public user defined type
 
 This is the test subroutine that gives me the compile error
 
 Public Sub test(t As Control
 t.Text = "foobar
 End Su
 
 Am I stuck, am I doing something wrong? Is there a way around it? Any other suggestion of how to do what I'd like? Thanks
- 11
 - Visual Basic >> Getting SSID with WMI in VB6 - NewbI was looking for ways to get the SSID of an active Wireless Connection.
 I've seen no other ways except to access it through WMI.
 
 I know nothing of WMI & I'm having little luck getting documentation or
 finding out how to get at WMI in VB6.
 
 I found this link: http://www.furrygoat.com/PermaLink.aspx?guid=000993
 
 It supposedly is how to get the SSID with WMI in .NET.
 
 Can any kind soul direct me on how to acheive this goal in VB6? All
 machines will be XP if that helps at all.
 
 Thanx in Advance
 Snuffy2
- 12
 - MFC >> Windows servicesCan I write windows service in VC++ .NET?
 
 thanks
 Mysty
- 13
 - MFC >> bug in Screen Saver Sample included in Visual C 6.0I'm trying to fix a bug in the Screen Saver sample in the Visual
 Studio 6.0 suite. The following is a brief description of the bug:
 
 When the program terminates CDrawWnd remains open. There remains
 an empty window box in the task bar, for every instance of the terminated
 program. The OnDestroy event occurs, even though the window doesn't
 actually get destroyed. I have tried every way I can think of to
 destroy the window manually, but to no avail.
 
 Is there some special way to terminate a screen saver application that
 I need to take into consideration?
 
 Please try to e-mail me your replies, if you can.
 
 Thanks,
 Mikko Antero Gustafsson
 mikko_gustafsson@hotmail.com
- 14
 - Visual Basic [VB] >> How to get control identification from (Sender as Object)Hi,
 
 I have this event that is performed by three different controls, how can
 I know (from sender object) wich control is used to trigger the event?
 
 Private Sub HighlightSelectedRow(ByVal sender As Object, ByVal e As
 System.EventArgs) Handles tbxAmount.Click, lblID.Click, lblExpense.Click
 
 Dim ctlControl As System.Type
 ctlControl = sender.GetType
 
 '???
 Select Case ctlControl
 '???
 End Select
 
 End Sub
 
 Thanks
 
 Marty
- 15
 - Visual Basic [VB] >> Array with string indexHi
 
 Is there a way to create an array of strings of subscript of type index too?
 Like;
 
 x("Element A")="Value for element A"
 
 Thanks
 
 Regards

Author

Message

Vijitha

Posted:

Top

Visual Basic >> Trip to Disney GET YOUR TRIP
TRIPS TO DESNEY
TRIPS TO HAWAII

http://travelexpert2004.us

http://travelexpert2004.biz

http://gotraveling85.us

Visual Studio320

Index ‹ Visual Studio ‹ Visual Basic

Next
- 1
 - MFC >> OnCreate of CFrameWnd based splitter pane gets called twice!!!Hi All,
 
 I have a splitter window, in which I want to have 3 panes (as vertical
 columns).
 
 My primary requirement is I want a menu inside one of the panes, i.e,
 menu should belong to the pane and not the whole window.
 
 To achieve this, I put a CFrameWnd derived class inside the pane. This
 CFrameWnd derived class has the menu I want.
 
 Now, my problem is that after I do this, the OnCreate of the FrameWnd
 is getting called twice all the time. Can anyone help me know why this
 is happening?
 
 Or even better, does anyone have an alternate solution to putting a
 menu in each pane of a splitter window?
 
 Thanks
 R
- 2
 - MFC >> function for getting a substring of a stringHello,
 I have CString variable.
 What is the function for getting the substring value of that string (like
 mid function in VB) ?
 
 Thanks :)
- 3
 - Visual Basic >> exe to be included as part of a MSI packageI wrote a little prg that must be included in an installer. I am not the
 author of installers. As a matter of fact, I know nothing about them. The
 author of the installer asked if I could return an error code that the MSI
 could handle. Sure... I guess. How to I return something to the equivalent
 of a command line?
 
 Maybe I am confused. If so, feel free to dope slap me!
 
 Thanks
 
 S
- 4
 - Visual Basic >> VB5 QuestionHello,
 I have programmed in several languages, but never VB before (not regular VB
 anyway). I've got a customer with an old application written in VB5. They
 only want a few simple changes, so I picked up a copy of VB5, and am
 attempting to load the program and make some simple changes. When I try to
 compile the project, it runs across a line of code that says, "Dim rs As
 Recordset". I know what this is, but I get the error, "Compile error: Can't
 find project or library" When I click the OK button, a form comes up
 listing available references, and apparently wants me to check off one of
 the libraries that may contain a reference to the Recordset object. I
 checked off a few that seemed like the right ones, like Microsoft ActiveX
 Data Objects 2.8 Library, and a few others, but this error persists. What
 do I to resolve this?
 
 Thanks,
 Jesse
- 5
 - MFC >> How to draw icon on button?Hello,
 
 I have what I think is a simple question. How do I draw an icon on a
 button? I set the "Icon" property for the button to true, but I don't know
 what to do next.
 
 Thanks.
- 6
 - MFC >> OT - Debug Windows EXEHi Guys,
 
 Sorry about the offtopic message.
 
 I have an old exe (16 bit). Don't have the source. I want to step throught
 the exe. I tried loading it in VS 2003 and even 4.1 but couldn't get it to
 do it.
 
 I remember doing that with exe's back in DOS days. Opening the exe in TASM
 and stepping through the exe.
 
 Does anyone know of a program that will let me do this?
 
 Ali
- 7
 - Visual Basic [VB] >> vb.net's CreateFileHi,
 
 Private Declare Function CreateFile _
 Lib "kernel32" Alias "CreateFileA" _
 (ByVal lpFileName As String, _
 ByVal dwDesiredAccess As Long, _
 ByVal dwShareMode As Long, _
 ByVal lpSecurityAttributes As Any, _
 ByVal dwCreationDisposition As Long, _
 ByVal dwFlagsAndAttributes As Long, _
 ByVal hTemplateFile As Long) As Long
 
 Private Declare Function closeHandle_ _
 Lib "kernel32" _
 Alias "CloseHandle" (ByVal hObject As Long) As Long
 
 How to convert these to vb.net - or is there some other way of obtaining a
 file handle. Well actually its "\\.\C:" i want to get to pass to another api
 function
 
 Stephen
- 8
 - Visual Basic >> vb NameI use Name to rename a file.
 
 All OK, Except when the directory name contains a space ..
 
 Name c:\Test files\abc.txt c:\Test files\abc.txz
 
 then Name fails.
 
 Any suggestions please.
 
 garry
- 9
 - Visual Studio C++ >> why is VC++ 2005 so much slower than VC++ 2003 ?We used to be able to do a complete rebuild of our application
 in 2 to 3 minutes in VC++ 2003. It takes 20+ minutes in VC++
 2005. And this is on a Intel extreme core 2 duo (2.93 Ghz) with
 2 GB of ram running Vista Ultimate x86 with a WD 10000 rpm
 150 GB raptor.
 
 Thanks,
 Lynn
- 10
 - Visual Basic [VB] >> Book recommendation?Has anyone read the book Microsoft .NET Remoting by Williams, Naftel, &
 McClean (Microsoft Press)? There are mixed reviews on Amazon. I'd like to
 know what you think. If you've also read Microsoft .NET Distributed
 Applications: Integrating XML Web Services and .NET Remoting by MacDonald,
 I'd also be interested in your opinion of that.
- 11
 - Visual Basic [VB] >> Listview select from Textbox stringI have a text box select items in a listview as text is being typed
 into the text box. I get the select bar to move correctly in the
 Listview control.
 
 If the user presses the down or up key in the text box, I want to move
 to the selected item in the listview box.
 
 The down or up arrow does set focus to the listview box and the
 selected item switches from the grey of being unfocused to the blue of
 focus. So far, so good.
 
 Pressing the down arrow again moves to the second entry in the
 listview instead of the entry below the currently highlighted entry.
 Susbsequent cursor movements work.
 
 Obviously, the selected table index that I'm using is not working
 correctly. What do I need to do to fix it?
 
 Private Sub txtLoc_TextChanged(ByVal sender As System.Object,
 ByVal e As System.EventArgs) Handles txtLoc.TextChanged
 Dim boolFound As Boolean
 Dim i As Integer
 Dim intLen As Integer
 Dim Item As ListViewItem
 Dim strLoc As String
 
 strLoc = txtLoc.Text.Trim ' Get the string
 If strLoc = "" Or strLoc = Nothing Then Exit Sub
 intLen = strLoc.Length ' Length of substring
 
 For i = 0 To lvw.Items.Count - 1
 Item = lvw.Items(i) ' Get the item
 Try
 If boolFound = False And Item.Text.Substring(0,
 intLen) = strLoc Then
 lvw.Items(i).Selected = True
 lvw.Items(i).EnsureVisible()
 boolFound = True
 Else
 lvw.Items(i).Selected = False
 End If
 Catch ex As Exception
 lvw.Items(i).Selected = False
 End Try
 Next
 End Sub
 
 Private Sub txtLoc_KeyUp(ByVal sender As Object, ByVal e As
 System.Windows.Forms.KeyEventArgs) Handles txtLoc.KeyUp
 If e.KeyData = Keys.Down Then lvw.Focus()
 If e.KeyData = Keys.Up Then lvw.Focus()
 End Sub
 
 Thanks
- 12
 - Visual Basic >> If.....Else?I have a WebBrowser control & a hidden ListBox. When the Form loads,
 the ListBox gets populated with those sites which the user has
 categorized as Restricted Sites (the ListBox actually gets populated
 with the different URLs from a text file).
 
 Now what I want is when the user types a URL in the address bar (which
 is a ComboBox), first it has to be checked whether the typed in URL
 exists in the ListBox or not. If yes, then show a MsgBox to the user
 asking hime whether he would like to proceed ahead or not (since it is
 a restricted site). If yes, take the user to the URL but if no, stay
 there itself & change the URL of the ComboBox to what it was before the
 user typed in the URL of the restricted site.
 
 For e.g. a user first visits www.yahoo.com which is not listed as a
 restricted site (though it will be checked first whether www.yahoo.com
 is listed as a restricted site or not). Next he types www.google.com,
 which is listed as a restricted site, in the address bar. When he
 presses 'Enter' on the keyboard, since www.google.com is a restricted
 site, he will be first shown a MsgBox asking whether he would like to
 proceed or not. If yes, direct the user to www.google.com but if no,
 stay there itself & change the address in the address bar to
 www.yahoo.com (since before typing www.google.com, the user was in
 www.yahoo.com).
 
 This is what I tried:
 
 Private Sub cboURL_Click(Index As Integer)
 Dim iCount
 For iCount = 0 To lstSites(0).ListCount - 1
 If (InStr(cboURL(0).Text, lstSites(0).List(iCount)) > 0) Then
 If (vbYes = MsgBox("Are you sure you want to proceed?",
 vbYesNo)) Then
 wWeb.Navigate2 cboURL(0).Text
 Else
 wWeb.Stop
 End If
 'Else
 ' wWeb.Navigate2 cboURL(0).Text
 End If
 Next
 End Sub
 
 Suppose the user types www.google.com, which is a restricted site, in
 the address bar. He is shown the MsgBox. Assume that he clicks No; so
 he stays put where he was & doesn't proceed ahead.
 
 Assume that next he enters www.yahoo.com in the address bar which is
 not a restricted site. Under such circumstances, the commented "Else"
 condition would take the user to www.yahoo.com after verifying that
 www.yahoo.com is not a restricted site BUT if that "Else" condition
 (i.e. the second "Else" condition) is not commented, then when the user
 had been shown the MsgBox asking him whether he would like to proceed
 or not after he had typed www.google.com in the address bar, then
 irrespective of whether the user clicks Yes or No in the MsgBox, he is
 still directed to www.google.com. The bottomline is there can be 3
 scenarios:
 
 1. URL typed in the address bar exists in the ListBox; show MsgBox
 a. If "Yes" is clicked in the MsgBox, let the user proceed forward to
 the restricted site (MsgBox="Yes")
 b. If "No", stay there itself & don't let the user proceed ahead.
 (MsgBox="No")
 
 2. URL typed by the user in the address bar doesn't exist in the
 ListBox; so let the user go ahead (which is as good as MsgBox="No").
 
 So on one hand, when MsgBox="No", then stay there itself but on the
 other hand, when MsgBox="No", proceed ahead. This is where I am getting
 stuck up i.e. the condition is the same (MsgBox="No") but 2 different
 statements have to be executed.
 
 Any ideas how do I overcome this problem?
 
 Thanks,
 
 Arpan
- 13
 - VB Scripts >> CDONTS strangenessI'm trying to send a mail using CDONTS with a .FROM email
 address that doesn't exist (like bob@nowhere.com), but it won't send
 the mail unless I put a valid .FROM email address (i.e. of an email
 address that exists)
 
 The mails I try to send on the Windows 2000 server are moved into the
 mailroot/Badmail folder as spam.. so this would seem to be a built-in
 spam prevention tool that CDONTS employs.
 
 This would be fine, if it always worked, but sometimes perfectly correct
 email addresses don't work either.
 
 Is there any way to disable this spam-prevention so that I can send
 emails no matter what the .FROM email address is?
 
 Cheers.
 --
 
 "I hear ma train a comin'
 ... hear freedom comin"
- 14
 - Visual Basic >> Show previous instance?I use App.PrevInstance to assure that a second instance of my app
 cannot be started. If it's True, I display a MsgBox telling the user
 about it and then force a shutdown of the second instance.
 
 What I would like to do is quietly shutdown the second instance and
 bring the previous instance to the foreground maximized. How do I do
 that?
 
 (I'll bet this is on Randy's web site somewhere but I couldn't find
 anything.)
- 15
 - Visual Basic [VB] >> Control events raised in a control from a projectThis is a multi-part message in MIME format.
 
 ------=_NextPart_000_0005_01C7D119.D8A50730
 Content-Type: text/plain;
 charset="us-ascii"
 Content-Transfer-Encoding: 7bit
 
 Hi;
 
 I have a component called Control that raises events when certain
 conditions are met.
 
 I'm using this component in a project called Business, and the Business
 component is used in another called UI.
 
 I will like to control in the UI component the events that Control
 raises, but I'm only referencing to Business in UI.
 
 Does it make sense?
 
 Thanks
 
 ------=_NextPart_000_0005_01C7D119.D8A50730
 Content-Type: text/html;
 charset="us-ascii"
 Content-Transfer-Encoding: quoted-printable
 
 <html xmlns:o=3D"urn:schemas-microsoft-com:office:office" =
 xmlns:w=3D"urn:schemas-microsoft-com:office:word" =
 xmlns=3D"http://www.w3.org/TR/REC-html40">
 
 <head>
 <META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; =
 charset=3Dus-ascii">
 <meta name=3DGenerator content=3D"Microsoft Word 11 (filtered medium)">
 <style>
 
 </style>
 
 </head>
 
 <body lang=3DEN-US link=3Dblue vlink=3Dpurple>
 
 <div class=3DSection1>
 
 <o:p> </o:p>
 
 Hi;<o:p></o:p>
 
 <o:p> </o:p>
 
 I have a component called Control
 that raises events when certain conditions are =
 met.<o:p></o:p>
 
 I’m using this component in a project called =
 Business,
 and the Business =
 component is used
 in another called UI.<o:p></o:p>
 
 <o:p> </o:p>
 
 I will like to control in the UI component the events that Control
 raises, but I’m only referencing to Business
 in UI.<o:p></o:p>
 
 <o:p> </o:p>
 
 <o:p> </o:p>
 
 Does it make sense?<o:p></o:p>
 
 <o:p> </o:p>
 
 Thanks<o:p></o:p>
 
 <o:p> </o:p>
 
 </div>
 
 </body>
 
 </html>
 
 ------=_NextPart_000_0005_01C7D119.D8A50730--