| Smart user removing domain admin group from local admin group |
|
 |
Index ‹ Windows OS ‹ Directory
|
- Previous
- 1
- active directory >> Problems with ldap-connectionsHello out there,
i´ve got a problem with a ldap-connection. We are using VOIP-WLAN-Phones made by Siemens. They use a ldap-connection to download active-directory data for the phonebook. I´ve found out that only those users will be displayed which have the group "anonymous-anmeldung" or, free translated "anonymous-login" as an read-entry in the security tab of "Active directory users and computers". The users without this setting will not be displayed and not be downloaded by the phones... so far so good: if i set the entry manually, it will disappear after a certain amount of time (sometime half´n hour, sometimes later...).
Can anyone "explain" this and how could I cancel this annoying behaviour? I this perhaps a "security feature" and are there other ways to get the ldap-dowloads?
with kind regards
Thomas Hartung
--------------= Posted using GrabIt =----------------
------= Binary Usenet downloading made easy =---------
-= Get GrabIt for free from http://www.shemes.com/ =-
- 2
- Security >> .NET Messenger Service StaffI have received about 13 emails from Microsoft since last
eve listing .NET Messenger Service Staff as the sender
and listing subject as Urgent .NET security update. I
doubt they are truly from Microsoft. Can anyone tell me
what they actually are. They seem to arrive every hour
or so. I have two systems here and they are coming in on
both of them. Thx, Jayne
- 3
- win2000 >> Server UpgradeHi experts,
I am going to upgrade my server machine.
I have windows server 2003 standard edition installed on the current
machine.
What would be the most efficient way to copy all files across to the
new one?
would file replication help?
thanks
--
code-geek
------------------------------------------------------------------------
Posted via http://www.webservertalk.com
------------------------------------------------------------------------
View this thread: http://www.webservertalk.com/message1585712.html
- 4
- WindowsServices >> Leadit.SharePoint.Essentials install problemHas anyone else experienced a problem with running the MSI package for
Jan Tielen's Leadit.SharePoint.Essentials web parts? I'm using the
1.1.2.0 version on a Virtual Machine. I get to the point about updating
the GAC, but then I get the following error:
---------------------------
Setup
---------------------------
Setup has encountered an error during installation and must close. For
more information, see C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\wppackger.log
---------------------------
OK
---------------------------
If I look at the wppackger.log file, it's empty (0 bytes)
The event log has the following application event listed:
Product: Lead-it SharePoint Essential Webparts -- Installation failed.
I am running a VM with Windows 2003 SP1, WSS SP1 and the KB887981
patch. I'm using the WMSDE database, installed to a non-default
directory.
I've been able to install the MSI on other servers, without any issues.
Thanks
Ivan
- 5
- win2000 >> network copy access deniedHi,
I'm trying to copy, either from copy/xcopy command or via the explorer,
few files between 2 Windows 2000 Server host. From the same directory to a
maintenance shared drive, only few files doesn't get copied because of an
'Access Denied'
ex: copy d:\temp\a.txt \\host1\d$\temp works ok
copy D:\temp\a2.txt \\host1\d$\temp access denied.
The file a2.txt doesn't exist on host1. The local permission are ok,
because I can copy the a2.txt locally without problem to any folder. When I
copy the file with /Z option it stop at ~ 77% and then I got a 'Access
denied'. If I remove some bytes from the file a2.txt (5 bytes is ok). The
copy works fine, same thing if I add bytes (5 bytes).
what's wrong
Thanks
- 6
- Directory >> Windows xp with AD and DFSI am trying to connect a windows XP computer to a windows
2000 domain. All I am doing is connecting the XP box to a
Shared folder on the 2000 Server Domain. The domain is
judicial.local and the share is court.
The share on the server is part of a Domain DFS with two
computers.
When i connect I connect with the drive letter F:
\\judicial.local\court
I have tried just \\judicial\court But it doesn't work.
When I click on a file it asks to Open of Cancel
I can click open and it works great but I don't want it
asking me this everytime I try and open a file.
This is for a customer and I need to get this done has
fast as I can. I know why it's doing it but I don't know
how to fix it..
Please help!!
- 7
- WindowsServices >> Automcatically connect sharepoint network drive using login scriptHi,
I would like to connect to a sharepoint network drive using login scripts.
The command I need to perform looks like this:
net use z: http://company.com/wss
But this command does not work in the login script.
Environment:
The users are all in a windows domain and have configured their browsers to
include the company.com server in their trusted sites.
When they just use their browser to connect to the sharepoint URL above they
are not prompted for logon credentials (this behavior is ok).
How can I map that network drive using a login script without having to
include the user's password in that script?
Thanks in advance!
Johannes Jauch
- 8
- Directory >> AD not openening from local serverHello,
I have a Windows 2003 server joined to a domain as an additional DC and the
problem I am having is that when I am opening AD Users and Computers the snap
in is opening it up from another DC across the WAN. This of course makes it
so long to open up. To resolve it, I just choose "Connect to Domain
Controller" and choose itself. AD then runs normally. When I close it and
reopen it, it still takes awhile and connects to the same DC across the WAN.
This also happens with AD Sites and Services as well as AD Domains and
Trusts. Can someone help how to make it open up locally? It is also happening
on another 2003 DC as well. Thanks,
Jimmy K
- 9
- 10
- Directory >> active directory questionI'm getting ready to switch over our company over to Windows 2003. We are a
company made up of 3 companies, each with a different name, but under one
umbrella company. I've started to layout the basic structure, but would
like to have input from some experienced users. The overall domain name
would be XYZ.local (umbrella company), with other companies then being part
of XYZ.local. Their names would be Acme.XYZ.local, Generic.XYZ.local and
General.XYZ.local. Does this
layout sound correct so far?
Thanks for any help you might be able to provide.
A
- 11
- Directory >> Updating IP/machine names to DNSWe are using Nortel Optivity ID DNS server and our DHCP
and active directory are not deleting entries or sending
the correct updates to delete records that know longer
exist. Then we get multiple IP addresses showing up for
one machine. Is there a command line tool to use to
force deletions of records that don't exist any more? Is
there another reason why this is happening? Our DNS has
not changes for years and this just started happening.
We have up'd our lease time on DHCP which has helped but
has not fixed our problem.
- 12
- WindowsMe >> Ad-awareWell, it's been weeks now. I've e-mailed them twice asking how I'm supposed
to acquire my copy of Ad-aware Plus as per my 2000 purchase that included
lifetime updates. I've had initial acknowledgment of both e-mails but no
further response. I shall henceforth consider Lavasoft to have become a new
Symantec - their products don't work and they don't give a puck about their
customers. I shall assume they have decided lifetime updates promised in the
early days was a mistake. I expect that in court they will try to argue that
Ad-aware 2007 is a different product - and, indeed, that that is why they
named it so!
I shall spread the word that they - like Symantec - are not the sort of
company it's wise to trust your valuables with! Of course, it doesn't seem
to hurt Symantec - which is what the cynical puckers will be counting on.
Like with NAV and NIS there're always plenty of mugs who will argue that
it's the best product on the market! Plenty of customers for the medicine
show!
Shane
- 13
- WindowsServer >> WS03 ntbackup "/um" switchaccording to most of the reference materials I have seen the "/um" switch is
meant ot work only with windows 2000
However it appears to have a function in server 2003, e.g. the only way I
could get the batch file below to work was to use the "/um" switch at the
end of the command line
Is there any documentation for this switch in server 2003?
Am I correct that "/um" does indeed have a function in server 2003?
*****************************************
setlocal
Set CURRDATE=%TEMP%\CURRDATE.TMP
DATE /T > %CURRDATE%
Set PARSEARG="eol=; tokens=1,2,3,4* delims=/, "
For /F %PARSEARG% %%i in (%CURRDATE%) Do SET dte=%%k%%j%%i
pushd %windir%\system32\
net stop NtmsSvc
net start NtmsSvc
start /wait rsm.exe refresh /lf"Dell PowerVault 110T LTO2 Tape Drive"
NTBACKUP.EXE backup "@c:\progra~1\rogabat\file.bks" /N "%DTE%" /v:yes /r:no
/rs:no /hc:on /m normal /l:s /p "LTO Ultrium" /UM
popd
rem clean up
if exist %CURRDATE% del %CURRDATE%
*****************************************
regards
Roga
- 14
- Directory >> Account policy applied to Sub-DomainDear Al
I am administering a sub-domain in a tree and am trying to change some of the Account Policies within the Default Domain Policy (eg. Maximum Password Age). Unfortunately the changes I make aren't being applied. I believe this is because the higher level domain is over-riding my settings. Could this be the case? If so, how can I stop this from happening
Any help much appreciated.
- 15
- Directory >> Which policy would take precedence, user or computer?I have some policies setup per user in my AD setup. I want to apply some
changes but only on certain computers. I add those computers to their own
OU, make the changes (screensaver time) and when a user logs in (they have
different screensaver time settings), would the PC take the users GP
settings, or would the computer GP settings override them?
Work in a hospital so the screensaver coming on is a big deal with privacy
and all that stuff. Right now it's setup so when the nurses login, the
scrsvr is set to turn on after 60 seconds, well we only want certain
computers to do that because the doctors are complaining that it's too quick
and they want it at 10 minutes.
I guess you could separate the pc's in their own ou's, and then remove the
settings from the users, and apply it to the pc's, but I am still curious as
to which setting would take precedence, the computer, or the user.
|
| Author |
Message |
skump
|
 Posted: Tue Jun 29 13:44:21 PDT 2004 |
Top |
Directory >> Smart user removing domain admin group from local admin group
I have a couple of "smart" users that are removing the
Domain administrator group from the local admin group on
their pc. This is creating serious issues with trying to
administrate the environment. I remember from an old job I
had where there was a script that was put into Active
Directory that would force / readd the domain admin group
to the local admin group. The script would force this do to
the fact of connection and login to AD. This force was not
account linked but forced do to being in the login script
section of AD. If anyone has any ideas on this it would be
greatly appriciated.
Please feel free to email me as well.
J Riding
Windows OS205
|
| |
|
| |
|
Chriss3
|
| Posted: Tue Jun 29 13:44:21 PDT 2004 |
Top |
Directory >> Smart user removing domain admin group from local admin group
Hello Jody.
You may not should give them local administrator rights if they not are
trusted, the article below shows how you can link the domain admins group to
the local admin group, the membership will refresh every time the GPO is
re-applied I think, it's every 90min by default.
Restricted groups with in a Group Policy allow to map membership
http://www.chrisse.se/MAQB.asp?ID=29
--
Regards
Christoffer Andersson
No email replies please - reply in the newsgroup
------------------------------------------------
http://www.chrisse.se - Active Directory Tips
"Jody Riding" <EMail@HideDomain.com> skrev i meddelandet
news:2314901c45e01$e21742d0$EMail@HideDomain.com...
> I have a couple of "smart" users that are removing the
> Domain administrator group from the local admin group on
> their pc. This is creating serious issues with trying to
> administrate the environment. I remember from an old job I
> had where there was a script that was put into Active
> Directory that would force / readd the domain admin group
> to the local admin group. The script would force this do to
> the fact of connection and login to AD. This force was not
> account linked but forced do to being in the login script
> section of AD. If anyone has any ideas on this it would be
> greatly appriciated.
>
> Please feel free to email me as well.
>
> J Riding
|
| |
|
| |
|
ptwilliams
|
| Posted: Tue Jun 29 15:41:45 PDT 2004 |
Top |
Directory >> Smart user removing domain admin group from local admin group
I have to chip in here. Chris' solution is the solution to take, however,
GPO processing does occur every 90 mins by default, but once it has applied
will not apply again unless the GPO is changed. Therefore, if the users
change the group membership after GPO application, it will not get changed
again until foreground processing occurs - a logon (or reboot) or secedit
/refreshpolicy machine_policy /enforce (unless you've set the security
client side extension to process every time regardless of change).
--
Paul Williams
_________________________________________
http://www.msresource.net
Join us in our new forums!
http://forums.msresource.net
_________________________________________
"Chriss3" <EMail@HideDomain.com> wrote in message
news:%EMail@HideDomain.com...
Hello Jody.
You may not should give them local administrator rights if they not are
trusted, the article below shows how you can link the domain admins group to
the local admin group, the membership will refresh every time the GPO is
re-applied I think, it's every 90min by default.
Restricted groups with in a Group Policy allow to map membership
http://www.chrisse.se/MAQB.asp?ID=29
--
Regards
Christoffer Andersson
No email replies please - reply in the newsgroup
------------------------------------------------
http://www.chrisse.se - Active Directory Tips
"Jody Riding" <EMail@HideDomain.com> skrev i meddelandet
news:2314901c45e01$e21742d0$EMail@HideDomain.com...
> I have a couple of "smart" users that are removing the
> Domain administrator group from the local admin group on
> their pc. This is creating serious issues with trying to
> administrate the environment. I remember from an old job I
> had where there was a script that was put into Active
> Directory that would force / readd the domain admin group
> to the local admin group. The script would force this do to
> the fact of connection and login to AD. This force was not
> account linked but forced do to being in the login script
> section of AD. If anyone has any ideas on this it would be
> greatly appriciated.
>
> Please feel free to email me as well.
>
> J Riding
|
| |
|
| |
|
Chriss3
|
| Posted: Wed Jun 30 14:11:50 PDT 2004 |
Top |
Directory >> Smart user removing domain admin group from local admin group
Good point, Also note the Restricted Group Policy will clear every existing
member to the local group and replace it with the members listed in the
policy.
--
Regards
Christoffer Andersson
No email replies please - reply in the newsgroup
------------------------------------------------
http://www.chrisse.se - Active Directory Tips
"ptwilliams" <EMail@HideDomain.com> skrev i meddelandet
news:EMail@HideDomain.com...
> I have to chip in here. Chris' solution is the solution to take, however,
> GPO processing does occur every 90 mins by default, but once it has
applied
> will not apply again unless the GPO is changed. Therefore, if the users
> change the group membership after GPO application, it will not get changed
> again until foreground processing occurs - a logon (or reboot) or secedit
> /refreshpolicy machine_policy /enforce (unless you've set the security
> client side extension to process every time regardless of change).
>
> --
>
> Paul Williams
> _________________________________________
> http://www.msresource.net
>
>
> Join us in our new forums!
> http://forums.msresource.net
> _________________________________________
> "Chriss3" <EMail@HideDomain.com> wrote in message
> news:%EMail@HideDomain.com...
> Hello Jody.
>
> You may not should give them local administrator rights if they not are
> trusted, the article below shows how you can link the domain admins group
to
> the local admin group, the membership will refresh every time the GPO is
> re-applied I think, it's every 90min by default.
>
> Restricted groups with in a Group Policy allow to map membership
> http://www.chrisse.se/MAQB.asp?ID=29
> --
> Regards
> Christoffer Andersson
>
> No email replies please - reply in the newsgroup
> ------------------------------------------------
> http://www.chrisse.se - Active Directory Tips
>
> "Jody Riding" <EMail@HideDomain.com> skrev i meddelandet
> news:2314901c45e01$e21742d0$EMail@HideDomain.com...
> > I have a couple of "smart" users that are removing the
> > Domain administrator group from the local admin group on
> > their pc. This is creating serious issues with trying to
> > administrate the environment. I remember from an old job I
> > had where there was a script that was put into Active
> > Directory that would force / readd the domain admin group
> > to the local admin group. The script would force this do to
> > the fact of connection and login to AD. This force was not
> > account linked but forced do to being in the login script
> > section of AD. If anyone has any ideas on this it would be
> > greatly appriciated.
> >
> > Please feel free to email me as well.
> >
> > J Riding
>
>
>
|
| |
|
| |
|
| |
|
Index ‹ Windows OS ‹ Directory |
- Next
- 1
- 2
- WindowsServer >> Dont whant install printer driverHi people, i'm trying to install 2 software (faxing soft) but they need to
install a printer driver.
but it seem windows 2003 R2 block them to install those driver printer ?!
why ? and how i can fix this ?
Thank a lot people...
- 3
- WindowsServer >> Servers crashing. Eventlog filled with Windows Product Activation Error Code: 8: 0x800705afI have had 2 separate live servers (Windows Server 2003 Web Edition
SP1) die within a week with the same log messages (below). The
machines are completely disabled and often cant even open the control
panel. By 'die' I mean web request got a "Server Unavailable" message
at best, but i am guessing that many wouldnt even get that. The UI was
completely unresponsive in many cases.
For various reasons, these machines had not had any updates applied for
about 8 months. They were not exposed to the internet, so they would
not be able to access updates. Hard resets would not work. They
would stop serving content right away. They are only running IIS6
(=2ENET 1.1 but no 'active' content) on a vanilla install from DELL.
The only way I could get them back online was to put them on the live
internet--where these particular machines should not be--and get the
updates. Applying the updates and resetting magically alleviated the
problem. This concerns me an awful lot, because it appears that windows
killed itself while trying to get updates? Anybody have any clues on
this?? All input appreciated!!
significant event log messages, not recorded since update:
Event Type: Error
Event Source: Windows Product Activation
Event Category: None
Event ID: 1000
Date: 3/27/2006
Time: 2:13:50 AM
User: N/A
Computer: *omitted*
Description:
An error occurred while the wizard was checking the current Windows
product license. Error Code: 8: 0x800705af For more information, see
Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Event Type: Error
Event Source: W3SVC
Event Category: None
Event ID: 1002
Date: 3/27/2006
Time: 3:33:49 AM
User: N/A
Computer: *omitted*
Description:
Application pool 'DefaultAppPool' is being automatically disabled due
to a series of failures in the process(es) serving that application
pool.For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Event Type: Error
Event Source: Srv
Event Category: None
Event ID: 2000
Date: 3/26/2006
Time: 4:18:29 PM
User: N/A
Computer: *omitted*
Description:
The server's call to a system service failed unexpectedly.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 00 00 04 00 01 00 54 00 ......T.
0008: 00 00 00 00 d0 07 00 c0 ....=D0..=C0
0010: 00 00 00 00 9a 00 00 c0 ....?..=C0
0018: 00 00 00 00 00 00 00 00 ........
0020: 00 00 00 00 00 00 00 00 ........
0028: 37 03 04 05 7...
- 4
- Security >> about:blank on explorer startupI have some kind of a problem with explorer when I open
it. Rather than going to my home page, it
says "about:blank" in the address bar and when I go to
another site, the system crashes.
Anyone know what this is? and what to do about it?
Thank You
jnordsell
- 5
- WindowsServices >> Service not available after installing WSSWhen I try to start the Central Adminstation Page, I get a "Service Not
Available" message.
I just installed WSS on a clean Win2003 server following the
Administrator's Guide for WSS using SQL Server as database.
During the installation I didn't receive any error messages, I've
rebooted the server and restarted IIS 6, but that didn't do the trick.
Who can help me solve this problem?
Thanks in advance,
Thorsal
- 6
- Platbuilder >> Some problems about SDI0 WIFI DRIVERi port a sdio wifi driver according the sdio.
now it the connect with wireless AP.
and can be allocated a ip address.
but there are some errors in the debug ,
"The IE doesn't contain up to the Length field!
" will appear aways.
the debug information is:
4294930880 PID:400002 TID:1f1000e SDSetCardInterfaceForSlot - HC ClockRate
differs desired setting: desired: 100000 Hz, Actual : 400000 Hz
4294931191 PID:400002 TID:1f1000e SDBusDriver: Get CCCR
4294931193 PID:400002 TID:1f1000e SDBusDriver: get the card capabilities
register
4294931195 PID:400002 TID:1f1000e SDBusDriver: get the SD Spec rev
4294931197 PID:400002 TID:1f1000e SDBusDriver: get the CIS pointer
4294931203 PID:400002 TID:1f1000e SDBusDriver: get the Manufacturer ID
4294931483 PID:400002 TID:1f1000e OSAXST1: >>> Loading Module 'sdio8686.dll'
(0x8D62D3A8) at address 0xD0C00000-0xD0C42000 in Process 'NK.EXE' (0x8C248BC0)
PB Debugger Loaded 'SDIO8686.DLL', no matching symbolic information found.
4294931488 PID:400002 TID:1f1000e DEVICE!RegReadActivationValues
RegQueryValueEx(\Drivers\SDCARD\ClientDrivers\Custom\MANF-02DF-CARDID-9103-FUNC-1\BusPrefix) returned 2
4294931497 PID:400002 TID:1f1000e
DeviceFolder::LoadDevice(\Drivers\SDCARD\ClientDrivers\Custom\MANF-02DF-CARDID-9103-FUNC-1) last 10 Ticks
4294931507 PID:400002 TID:56e0006 ==>NdisInitializeWrapper
4294931507 PID:400002 TID:56e0006 <==NdisInitializeWrapper
4294931508 PID:400002 TID:56e0006 ==>NdisMRegisterMiniport:
NdisWrapperHandle D0B58150
4294931508 PID:400002 TID:56e0006 ==>ndisRegisterMiniportDriver:
NdisWrapperHandle D0B58150
4294931509 PID:400002 TID:56e0006 <==ndisRegisterMiniportDriver: MiniBlock
D0B58B70
4294931510 PID:400002 TID:56e0006 NdisMRegisterMiniport: MiniBlock D0B58B70
4294931510 PID:400002 TID:56e0006 <==NdisMRegisterMiniport: MiniBlock
D0B58B70, Status 0
4294931511 PID:400002 TID:56e0006
4294931513 PID:400002 TID:56e0006 ndisMInitializeAdapter: Miniport D0B58DB8,
4294931521 PID:400002 TID:56e0006 ==>ndisQueueMiniportOnDriver: Miniport
D0B58DB8, MiniBlock D0B58B70
4294931521 PID:400002 TID:56e0006 <==ndisQueueMiniportOnDriver: Miniport
D0B58DB8, MiniBlock D0B58B70, rc 1
4294931567 PID:400002 TID:56e0006 SDGetClientFunctions: +Init
4294931567 PID:400002 TID:56e0006 SDGetClientFunctions: -Init
4294931568 PID:400002 TID:56e0006 SDSetCardFeature: SD_IO_FUNCTION_DISABLE!
4294931588 PID:1de0002 TID:1510002 [NOTIFY] HandleSystemEvent 7 /ADD NDL1:
4294931659 PID:400002 TID:56e0006 SDEnableDisableFunction: Attempting to
disable function that is already disabled
4294960691 PID:400002 TID:56e0006 SDSetCardFeature: SD_IO_FUNCTION_ENABLE!
4294961203 PID:400002 TID:56e0006 SDSetCardFeature:
SD_IO_FUNCTION_SET_BLOCK_SIZE!
4294961213 PID:400002 TID:56e0006 SDHCDSlotOptionHandler option =
SDHCDEnableSDIOInterrupts
4294961215 PID:400002 TID:56e0006 ==>NdisMSetAttributesEx: Miniport D0B58DB8
4612 PID:400002 TID:56e0006 ==>NdisMRegisterAdapterShutdownHandler:
Miniport D0B58DB8
4612 PID:400002 TID:56e0006 <==NdisMRegisterAdapterShutdownHandler:
Miniport D0B58DB8
4697 PID:400002 TID:333000e NDISPWR:: BIND notification for adapter
[SDIO86861]
4720 PID:400002 TID:3d60002 ZCF:: InfContext [0xd0c9b050] created..
PB Debugger Loaded symbols for
'D:\WINCE600\OSDESIGNS\OD_W90P910\OD_W90P910\RELDIR\WB_W90P910_ARMV4I_DEBUG\EAPOL.DLL'
4803 PID:400002 TID:3d60002 ZCF:: Failed set OID_802_11_SSID.
4816 PID:400002 TID:3d60002 OSAXST1: >>> Loading Module 'eapol.dll'
(0x8D6D2BB0) at address 0xC0B00000-0xC0B19000 in Process 'NK.EXE' (0x8C248BC0)
4853 PID:1de0002 TID:56e0006 [NOTIFY] HandleSystemEvent 5 none
4897 PID:1de0002 TID:420000a NETUIQC: Unable to open key
[Drivers\BuiltIn\Ethman\Log]
4989 PID:1de0002 TID:3290012 ETHMAN: Error updating connection status: 55
5996 PID:400002 TID:420000a OSAXST1: >>> Loading Module 'wzcsapi.dll'
(0x8D6DDA5C) at address 0x40420000-0x4042A000 in Process 'NK.EXE' (0x8C248BC0)
PB Debugger Loaded symbols for
'D:\WINCE600\OSDESIGNS\OD_W90P910\OD_W90P910\RELDIR\WB_W90P910_ARMV4I_DEBUG\WZCSAPI.DLL'
5998 PID:1de0002 TID:420000a OSAXST1: >>> Loading Module 'wzcsapi.dll'
(0x8D6DDA5C) at address 0x40420000-0x4042A000 in Process 'udevice.exe'
(0x8D23584C)
7444 PID:1de0002 TID:43a0006 NKCreateMsgQueue returns 00870203, dwErr =
000000b7
8563 PID:400002 TID:420000a DlgMgr: FindDlgItem id 1 returning NULL.
8948 PID:400002 TID:420000a DlgMgr: FindDlgItem id 1 returning NULL.
9030 PID:400002 TID:42b0006 ZCF:: Warning!
File[C:\ymzki\private\winceos\comm\layer2svc\zeroconfig\Server\.\ieparse.c]
-- Line[826] : The IE doesn't contain up to the Length field!
9035 PID:400002 TID:42b0006 ZCF:: Warning!
File[C:\ymzki\private\winceos\comm\layer2svc\zeroconfig\Server\.\ieparse.c]
-- Line[826] : The IE doesn't contain up to the Length field!
9043 PID:400002 TID:1e4000e UIO:: >> Read time out or forced out.. <<
9045 PID:400002 TID:42b0006 WZCSVC:: NIO:: $$$ EAPOL session with
NIO_CONTEXT [0xd0c9b930] deleted..
9074 PID:400002 TID:42b0006 ZCF:: Failed set OID_802_11_SSID.
10627 PID:400002 TID:420000a DlgMgr: FindDlgItem id 1 returning NULL.
10717 PID:1de0002 TID:43a0006 NETUIQC: Could not find the systray icon
associated with the given device name
13845 PID:400002 TID:420000a ZCF:: Warning!
File[C:\ymzki\private\winceos\comm\layer2svc\zeroconfig\Server\.\ieparse.c]
-- Line[826] : The IE doesn't contain up to the Length field!
13851 PID:400002 TID:420000a ZCF:: Warning!
File[C:\ymzki\private\winceos\comm\layer2svc\zeroconfig\Server\.\ieparse.c]
-- Line[826] : The IE doesn't contain up to the Length field!
13874 PID:400002 TID:420000a ZCF:: Warning!
File[C:\ymzki\private\winceos\comm\layer2svc\zeroconfig\Server\.\ieparse.c]
-- Line[826] : The IE doesn't contain up to the Length field!
13880 PID:400002 TID:420000a ZCF:: Warning!
File[C:\ymzki\private\winceos\comm\layer2svc\zeroconfig\Server\.\ieparse.c]
-- Line[826] : The IE doesn't contain up to the Length field!
18959 PID:400002 TID:420000a ZCF:: Warning!
File[C:\ymzki\private\winceos\comm\layer2svc\zeroconfig\Server\.\ieparse.c]
-- Line[826] : The IE doesn't contain up to the Length field!
18965 PID:400002 TID:420000a ZCF:: Warning!
File[C:\ymzki\private\winceos\comm\layer2svc\zeroconfig\Server\.\ieparse.c]
-- Line[826] : The IE doesn't contain up to the Length field!
- 7
- Platbuilder >> Platform Builder for Windows CE 5.0Hello All:
I can't seem to find the download for the Platform Builder for Windows CE
5.0 evaluation. Everything is pointing me to the 6.0 version, but I need the
5.0 version. Does anyone know where to find this?
Alternatively, is there a resource that lists the size of each of the
components available in Windows CE 5.0? I'm trying to get an estimate of how
large my OS image will be with various components included.
Thanks, Robert
- 8
- win2000 >> Changed Computer NameI changed the name of a computer and it automatically rebooted. However, now
I can't log in. The old username and password don't work and the new
computer name doesn't work since I don't have a password.
Any suggestions on how to get in. (I don't have administrator access)
- 9
- WindowsServer >> bulk adding usershello,
i'm pretty new to windows 2003 server, so please, bear with me.
i have to make a bunch of users(500, and all are devided in 7 groups). i
don't want to do this one by one. because there is this command line :
LDIFDE (and CSV??). that's where i got stuck.
i couldn't find anything helpfull about writing that file, or how to use it
with windows 2003 command line. so i was wondering if someone could help me
with that.
if you were wondering, these are the specified user accounts :
group name Account name
group 1 2000-2020
group 2 3000-3250
group 3 4000-4100
group 4 7000-7010
group 5 5000-5010
group 6 6000-6100
group 7 1000-1010
any help would be greatly appriciated,
jeroen
- 10
- Drivers >> What are the requirements to let the CMD.EXE copy command work?Hello,
I wrote a network redirector, read-only so far. I support mmap but not
the cache manager and notepad.exe works.
I'm now about to understand why some applications aren't working. The
CMD.EXE copy command for example.
I can drag'n'drop a file from the network drive to the desktop. But I
can't use the copy command. It just returned "0 file(s) copied".
When I use IrpTracker all requests succeed. Where is the difference
between explorer and the copy command while copying files? (I have
support for short file names)
Another application is winzip. I found several posts in the osr archive
about winzip, but none of the solutions solved my problem with winzip.
Any help is appreciated.
--
h.wulff
[dont send me an email]
- 11
- Drivers >> timershello all,
I would like to modify the MSVAD sample (virtual audio driver). I would like
to create a timer which ticks control the creation of the wavefile. My goal
is to create a wavefile every second.
How can I handle this?
I have seen that, there are routines which seem to be never used...
CMiniportWaveCyclicStreamMSVAD::SetState
CMiniportWaveCyclicStreamMSVAD::SetNotificationFreq
I think they can be usefull...
Any idea to help me do what I want?
Thanks a lot.
Giuseppe Maione
- 12
- active directory >> Commands to T/S ADHi all,
I just setup a Windows 2003 R2 AD domain, I was going to test out its
replication status with the repadmin command, but it seems that repadmin does
not exist on my server. Is there some sort of support tools for AD that I
need to install?
Robert
- 13
- 14
- Directory >> More on user permissions in a 2K AD domainFirst, I would like to thank Gautam Anand, Oli Restorick, and Marco for
their feedback that has led to the following hypothesis.
Before I go off and attempt this and end up in a wild goose chase, is it
possible to create a user that has no login privleges, no resource access
and whatnot but can add computers to a domain? What I am wanting is to keep
the Domain Admins off of any workstation. I made the realization that the
computer only needs to be able to join a domain and then a *local* RunAs
Admin privilege combined with normal Domain User permissions is all that is
needed from then on for the remainder of the setup.
... or am I WAY off base?
And while I'm here, what are your feelings about Terminal Services running
on the DC? I'm thinking of not using TS on the DC at all and have only local
console access. (You might have guess by now that I'm one of those
"abstinence is the only sure protection" kind of people.)
Thanks again in advance.
Eric
(cross-posted in: microsoft.public.win2000.active_directory and
microsoft.public.win2000.security due to relevancy.)
- 15
- WindowsServer >> Server of the user accounts for XP ClientsHi guys, i've a doubt of as i can it carry out the setup for than my server
(Windows Server 2003 Enterprise), can it serve for 60 machines clients with
Windows XP Professional SP2, the service of user accounts, where all accounts
have only 50 MB of the space in the disk of the server.
Please someone can help me!!
Junio Vitorino
Network Administrator CESSAL
http://www.facsal.br
|
|
|