| How to start installation wizard for ISA server 20004 in command l |
|
 |
Index ‹ Information Technology ‹ SBS
|
- Previous
- 1
- SBS >> Logging on problemsWe are running SBS2003 and since the weekend, when we had to shut it down due
to an upcomming power outage, it now takes over an hour to log into the
server. It just stays at the "applying computer settings" stage.
Once we do get on, we cannot get to the internet from the server
(Workstation users have no problems with this), we cannot get to the network
card properties and the internet conection options.
Has anybody come across this or have any idea what is going wrong?
--
jimbo345
- 2
- SBS >> ISA 2004 Cache Problem?Noticed a few weeks ago a few of our SBS 2003 Premium servers networks that
the clients that have there home page set to msn.com would get the same
day/page even when refreshed over and over, this would go on for a few days
then it would be ok with a new day/page for day again. It was flawless until
a few weeks or so ago. Anyone notice this anomaly Where should I begin to
look in ISA 2004. Caching is on and all is at the defaults.
Thanks Ahead.
Dirk-Thomas
- 3
- Crm >> KB899912 - "A connection cannot be established at this time..."899912 Error Message 5/26/2005 You receive an "A connection cannot be
established at this time. Please try again later" error message when you
register Microsoft CRM Mobile on a Pocket PC device.
I found this KB#/listing on this site:
http://www.sonomapartners.com/microsoft-crm-support-articles-may2005.aspx
Apparently to get the KB I need some kind of special login which I don't
have. Any change someone is able to retrieve this info and post here? I'm
desperate for a solution...
You are supposed to be able to login to either of these sites below for the
article:
http://www.microsoft.com/dynamics/partnersource.mspx
or
http://www.microsoft.com/dynamics/customersource.mspx
Please Help!
Thank you!
- 4
- SBS >> iis6 Excahnge and Public StoreEach and every time I load System Manager I get this error message when I
attempt to expand Public Folders:
---------------------------
Exchange System Manager
---------------------------
The operation failed because of an HTTP error 502.
Facility: Exchange System Manager
ID no: c1030af4
Exchange System Manager
--------------------------
OK
Now for some reason I feel that it just doesn't even exist on my server
anymore... but I'm not sure why and how to fix it. I have also noticed when
I open ISS6 and I attempt to browse Public under Default Web Site it says:
HTTP Error 404 - File or directory not found. So I thought to myself that
this might be related so I checked out the virtual path of it and it is:
\\.\BackOfficeStorage\pgsidom.local\Public Folders. So I then figured I'd do
a search for the folder and I didn't find anything. I also have this same
problem when I attempt to browse Exadmin. Any ideas ?
Thanks,
Robert Margeson
- 5
- SBS >> exchange sp1Hi all, we are running SBS2003 Premium. Do I need to install Exchange SP1? I
have read in some places that it breaks some things in SBS. Everything is in
running order for us, so unless Exchange SP1 has some patches for big issues
or crtitical security updates, I wouldnt need it would I?
TIA!
- 6
- Messanger >> Primus TalkSince Primus has been discontinued as a service how can I
get my balance transfered to Primus's own service?
- 7
- SBS >> ActiveSync & SBS QuestionOK, not sure if this is the right forum so if I am wrong please point me in
the right direction. I have an SBS 2003 Prem installation running E2k3. I
am also using a Windows Mobile 6.0 device (Motorola Q using Verizon service).
I have configured the SBS and the device so it is syncing wireless no
problem, but.... there is a configuration change I am not sure I can do.
Basically in my Q device I get a notification when a new arrives in the
Inbox, but I have also set up server side rules for this mailbox to move
incoming messages to certain other folders when the arrive. This works great
in my Outlook client on my computer and I can sync the folders, but.... I
only get notifications on incoming to the Inbox which doesn't help me much if
there is mail in another folder. I physically have to go to that folder to
see if there is mail.
Is there anything I can do here or are there workarounds people are using?
Is this something that can be affected on the SBS side with Windows Mobile?
Thanks!
-Richard K
- 8
- SBS >> Adding 2003 back up domain controller to SBS 2000I have once before setup a win 2003 back up domain controller to SBS 2000.
I used a step by step document from Microsoft, I can not find it this time.
does any one know of the document I am referring to?
I also had to extend the exchange 2000 schema to 2003 before adding second
domain controller, I would also like to find the inspections for doing this
job also.
Any help?
- 9
- 10
- SBS >> AOL on ISA serverHi
Does anyone know how to get AOL 9 to run on an XP WS on
SBS Premium with ISA? I have never used AOL (compuserve in
the old DOS days) and call their help number when my
customers do need support. It was almost funny today
talking to them about what ports to open on ISA! :-(
I found KB 297479 on making 6.0 work and setup the Manual
Proxy and setup a Packet filter for their port but I still
can't get connected. I showed her how to get her AOL from
aol.com but she said it doesn't look the same and it
doesn't have all the features (which about made me sick)
but she is paying me and I would like to get this to
connect.
Thanks for any help.
Frank McCallister
COMPUMAC
- 11
- SBS >> How to determine your version of Exchange 2003Just to cover my butt, how do you tell if you have SP1 for Exchange 2003
installed? From the System Manager, if I go to help, and about Exchange
Server system, I get this:
Exchange System
Microsoft Corporation
Version: 6.5.7226.0
- 12
- Messanger >> Can't remove identity-logHi!
I really want to remove all the old identities that are
stored in the login-window list. Can't find a way to get
them out of that list... How can I do this?
It's like this:
"Choosing identity:
me@mymail.com
meagain@mymail.com
oldmeagain@mymail.com"
I want to remove the last two from the list... But how?
- 13
- SVCS >> Deployment Version ProblemWe are trying to deploy a report server project from an XP Dev box to a
Server2003 production environment.
Both computers are running SQL Server 2005 with SP1 installed.
We have tried to deploy by (1) a deploy over the network and (2) a database
backup of the ReportServer database and then a restore to the Server 2003
system.
Both methods give us exactly the same error...
The version of the report server database is either in a format that is not
valid, or it cannot be read. The found version is 'Unknown'. The expected
version is 'C.0.8.43'. To continue, update the version of the report server
database and verify access rights.
Why are we getting this error?
Regards,
Gary
- 14
- SBS >> SBS ConnectComputer run from XP workstation on different subnetRan workstation connectcomputer after allowing other subnet access via
granting subnet under default web site & child virtual sites also. It appears
that most os the setting worked correctly except for My documents
redirection, even the applications were deployed OK. Found one user did not
get a ID setup under Documents & settings folder & whether I add them in
locally I cannot fix the local profile fo this user. There are 2 users that
swap machines & one user's profiles works fine & can log into both machine &
even the exchange mail works great! I did find that during the initial
workstation setup it would not allow you to pick 2 users to log into the same
PC & allow you to migrate & match the local profiles aloready setup for the
users. I get "The local policy does not allow you to login interactively"
The PCs on the other subnet use static IP.subnet.gateway addresses & point
DNS.WINS to SBS on primary subnet. The DNS forward & reverse lookup zones
work fine for both subnets.
Of cource the connectcomputer functiion will not run again on the same PC &
I do not want to lose the one user that is setup on both mackines OK.
Anyone have any ideas????
- 15
- SBS >> SBS2003 VPN issueI have no problem to VPN to server, but I can not browse
server.
Do I need to do anything special?
jimmy
|
| Author |
Message |
BusyMomof3
|
 Posted: Sun Jun 12 10:31:45 PDT 2005 |
Top |
SBS >> How to start installation wizard for ISA server 20004 in command l
Hi,
I tried to install ISA server 2004 on my SBS 2003 with the premium
technologies CD but I get an error saying that the program couldn't read the
product key and that I have to start the wizard from the command line. I
cannot find the syntax for the command. Can anyone help?
Thanks a lot.
--
Oswaldo Cortes
Information Technology309
|
| |
|
| |
|
Marina
|
| Posted: Sun Jun 12 10:31:45 PDT 2005 |
Top |
SBS >> How to start installation wizard for ISA server 20004 in command l
Hi Oswaldo,
Have you checked the readme's on the CD?
--
Regards,
Marina Roos
Microsoft SBS-MVP
One of the Magical M&M's
www.smallbizserver.net
Take part in SBS forum:
http://www.smallbizserver.net/Default.aspx?tabid=53
"Oswaldo" <EMail@HideDomain.com> schreef in bericht
news:EMail@HideDomain.com...
> Hi,
> I tried to install ISA server 2004 on my SBS 2003 with the premium
> technologies CD but I get an error saying that the program couldn't read
the
> product key and that I have to start the wizard from the command line. I
> cannot find the syntax for the command. Can anyone help?
> Thanks a lot.
> --
> Oswaldo Cortes
|
| |
|
| |
|
Oswaldo
|
| Posted: Mon Jun 13 07:06:03 PDT 2005 |
Top |
SBS >> How to start installation wizard for ISA server 20004 in command l
Hi Marina,
Yes I checked the readme file on the CD and it tells me that for more
information about the command line syntax to specify a product key see the
updated version of this document at Microsoft Web site LinkId=45058 but this
link has the same information than the one on CD and nothing about the
command line syntax
Do you know how to report this problem to Microsoft or where can I get this
info?
Thank you very much.
Regards,
--
Oswaldo Cortes
"Marina Roos [SBS-MVP]" wrote:
> Hi Oswaldo,
>
> Have you checked the readme's on the CD?
>
> --
> Regards,
>
> Marina Roos
> Microsoft SBS-MVP
> One of the Magical M&M's
> www.smallbizserver.net
> Take part in SBS forum:
> http://www.smallbizserver.net/Default.aspx?tabid=53
>
> "Oswaldo" <EMail@HideDomain.com> schreef in bericht
> news:EMail@HideDomain.com...
> > Hi,
> > I tried to install ISA server 2004 on my SBS 2003 with the premium
> > technologies CD but I get an error saying that the program couldn't read
> the
> > product key and that I have to start the wizard from the command line. I
> > cannot find the syntax for the command. Can anyone help?
> > Thanks a lot.
> > --
> > Oswaldo Cortes
>
>
>
|
| |
|
| |
|
Susan
|
| Posted: Mon Jun 13 21:32:29 PDT 2005 |
Top |
SBS >> How to start installation wizard for ISA server 20004 in command l
Call product support services
Application of Service pack 1 to Small Business Server 2003:
http://support.microsoft.com/?kbid=555325
Oswaldo wrote:
>Hi Marina,
>Yes I checked the readme file on the CD and it tells me that for more
>information about the command line syntax to specify a product key see the
>updated version of this document at Microsoft Web site LinkId=45058 but this
>link has the same information than the one on CD and nothing about the
>command line syntax
>Do you know how to report this problem to Microsoft or where can I get this
>info?
>Thank you very much.
>Regards,
>
>
--
An open letter to the Security Community::
http://msmvps.com/bradley/archive/2004/12/12/23540.aspx
|
| |
|
| |
|
Oswaldo
|
| Posted: Tue Jun 14 06:46:06 PDT 2005 |
Top |
SBS >> How to start installation wizard for ISA server 20004 in command l
Hi Susan,
Thanks for your help but I just wanted to know if somebody knows the syntax
of the command or how to report to Microsoft that the information on the
LinkID=45058 is wrong. I have my ISA server 2000 working and I don't feel
that I have to pay $245 just for the syntax of one command that should be
posted on the documentation of the product. I guess I will wait.
Thank you very much,
--
Oswaldo Cortes
"Susan Bradley, CPA aka Ebitz - SBS Rocks" wrote:
> Call product support services
>
> Application of Service pack 1 to Small Business Server 2003:
> http://support.microsoft.com/?kbid=555325
>
>
> Oswaldo wrote:
>
> >Hi Marina,
> >Yes I checked the readme file on the CD and it tells me that for more
> >information about the command line syntax to specify a product key see the
> >updated version of this document at Microsoft Web site LinkId=45058 but this
> >link has the same information than the one on CD and nothing about the
> >command line syntax
> >Do you know how to report this problem to Microsoft or where can I get this
> >info?
> >Thank you very much.
> >Regards,
> >
> >
>
> --
> An open letter to the Security Community::
> http://msmvps.com/bradley/archive/2004/12/12/23540.aspx
>
|
| |
|
| |
|
Marina
|
| Posted: Fri Jun 24 18:54:49 PDT 2005 |
Top |
SBS >> How to start installation wizard for ISA server 20004 in command l
Hi Oswaldo,
sbsisa2k4setup /PID productkey
--
Regards,
Marina Roos
Microsoft SBS-MVP
One of the Magical M&M's
www.smallbizserver.net
Take part in SBS forum:
http://www.smallbizserver.net/Default.aspx?tabid=53
"Oswaldo" <EMail@HideDomain.com> schreef in bericht
news:EMail@HideDomain.com...
> Hi Marina,
> Yes I checked the readme file on the CD and it tells me that for more
> information about the command line syntax to specify a product key see the
> updated version of this document at Microsoft Web site LinkId=45058 but
this
> link has the same information than the one on CD and nothing about the
> command line syntax
> Do you know how to report this problem to Microsoft or where can I get
this
> info?
> Thank you very much.
> Regards,
> --
> Oswaldo Cortes
>
>
> "Marina Roos [SBS-MVP]" wrote:
>
> > Hi Oswaldo,
> >
> > Have you checked the readme's on the CD?
> >
> > --
> > Regards,
> >
> > Marina Roos
> > Microsoft SBS-MVP
> > One of the Magical M&M's
> > www.smallbizserver.net
> > Take part in SBS forum:
> > http://www.smallbizserver.net/Default.aspx?tabid=53
> >
> > "Oswaldo" <EMail@HideDomain.com> schreef in bericht
> > news:EMail@HideDomain.com...
> > > Hi,
> > > I tried to install ISA server 2004 on my SBS 2003 with the premium
> > > technologies CD but I get an error saying that the program couldn't
read
> > the
> > > product key and that I have to start the wizard from the command line.
I
> > > cannot find the syntax for the command. Can anyone help?
> > > Thanks a lot.
> > > --
> > > Oswaldo Cortes
> >
> >
> >
|
| |
|
| |
|
Oswaldo
|
| Posted: Mon Jun 27 07:22:04 PDT 2005 |
Top |
SBS >> How to start installation wizard for ISA server 20004 in command l
Hi Marina,
Thank you very much for the command, I will try it this weekend when nobody
is working and I let you know.
Again thank you very much.
Regards,
--
Oswaldo Cortes
"Marina Roos [SBS-MVP]" wrote:
> Hi Oswaldo,
>
> sbsisa2k4setup /PID productkey
>
> --
> Regards,
>
> Marina Roos
> Microsoft SBS-MVP
> One of the Magical M&M's
> www.smallbizserver.net
> Take part in SBS forum:
> http://www.smallbizserver.net/Default.aspx?tabid=53
>
> "Oswaldo" <EMail@HideDomain.com> schreef in bericht
> news:EMail@HideDomain.com...
> > Hi Marina,
> > Yes I checked the readme file on the CD and it tells me that for more
> > information about the command line syntax to specify a product key see the
> > updated version of this document at Microsoft Web site LinkId=45058 but
> this
> > link has the same information than the one on CD and nothing about the
> > command line syntax
> > Do you know how to report this problem to Microsoft or where can I get
> this
> > info?
> > Thank you very much.
> > Regards,
> > --
> > Oswaldo Cortes
> >
> >
> > "Marina Roos [SBS-MVP]" wrote:
> >
> > > Hi Oswaldo,
> > >
> > > Have you checked the readme's on the CD?
> > >
> > > --
> > > Regards,
> > >
> > > Marina Roos
> > > Microsoft SBS-MVP
> > > One of the Magical M&M's
> > > www.smallbizserver.net
> > > Take part in SBS forum:
> > > http://www.smallbizserver.net/Default.aspx?tabid=53
> > >
> > > "Oswaldo" <EMail@HideDomain.com> schreef in bericht
> > > news:EMail@HideDomain.com...
> > > > Hi,
> > > > I tried to install ISA server 2004 on my SBS 2003 with the premium
> > > > technologies CD but I get an error saying that the program couldn't
> read
> > > the
> > > > product key and that I have to start the wizard from the command line.
> I
> > > > cannot find the syntax for the command. Can anyone help?
> > > > Thanks a lot.
> > > > --
> > > > Oswaldo Cortes
> > >
> > >
> > >
>
>
>
|
| |
|
| |
|
Oswaldo
|
| Posted: Thu Jul 21 09:59:11 PDT 2005 |
Top |
SBS >> How to start installation wizard for ISA server 20004 in command l
Hi Marina,
Finally last weekend I was able to install the upgrade. The command line
didn't work but I browse the cd and ran the setup program direclty without
using the interface that appears when you insert the CD. After I started the
setup the program ask me for my product key and everythig worked well.
Thank you very much for your help.
Regards,
--
Oswaldo Cortes
"Oswaldo" wrote:
> Hi Marina,
>
> Thank you very much for the command, I will try it this weekend when nobody
> is working and I let you know.
> Again thank you very much.
> Regards,
>
> --
> Oswaldo Cortes
>
>
> "Marina Roos [SBS-MVP]" wrote:
>
> > Hi Oswaldo,
> >
> > sbsisa2k4setup /PID productkey
> >
> > --
> > Regards,
> >
> > Marina Roos
> > Microsoft SBS-MVP
> > One of the Magical M&M's
> > www.smallbizserver.net
> > Take part in SBS forum:
> > http://www.smallbizserver.net/Default.aspx?tabid=53
> >
> > "Oswaldo" <EMail@HideDomain.com> schreef in bericht
> > news:EMail@HideDomain.com...
> > > Hi Marina,
> > > Yes I checked the readme file on the CD and it tells me that for more
> > > information about the command line syntax to specify a product key see the
> > > updated version of this document at Microsoft Web site LinkId=45058 but
> > this
> > > link has the same information than the one on CD and nothing about the
> > > command line syntax
> > > Do you know how to report this problem to Microsoft or where can I get
> > this
> > > info?
> > > Thank you very much.
> > > Regards,
> > > --
> > > Oswaldo Cortes
> > >
> > >
> > > "Marina Roos [SBS-MVP]" wrote:
> > >
> > > > Hi Oswaldo,
> > > >
> > > > Have you checked the readme's on the CD?
> > > >
> > > > --
> > > > Regards,
> > > >
> > > > Marina Roos
> > > > Microsoft SBS-MVP
> > > > One of the Magical M&M's
> > > > www.smallbizserver.net
> > > > Take part in SBS forum:
> > > > http://www.smallbizserver.net/Default.aspx?tabid=53
> > > >
> > > > "Oswaldo" <EMail@HideDomain.com> schreef in bericht
> > > > news:EMail@HideDomain.com...
> > > > > Hi,
> > > > > I tried to install ISA server 2004 on my SBS 2003 with the premium
> > > > > technologies CD but I get an error saying that the program couldn't
> > read
> > > > the
> > > > > product key and that I have to start the wizard from the command line.
> > I
> > > > > cannot find the syntax for the command. Can anyone help?
> > > > > Thanks a lot.
> > > > > --
> > > > > Oswaldo Cortes
> > > >
> > > >
> > > >
> >
> >
> >
|
| |
|
| |
|
| |
|
Index ‹ Information Technology ‹ SBS |
- Next
- 1
- 2
- SBS >> Client licensingHi,
A customer currently has 5 clients on the network ( using all 5 included
licenses on the server ) . They wish to add 1 more clinet workstation to the
network.
Can a single client license be purchased or is the minimum increment a 5
user ?
On the licensing website I don't see anything about a single user .
Thanks, Chris
- 3
- 4
- SBS >> Network problems after upgrading to SBS2k3 from SBS2kI've upgraded the SBS2k to SBS2k3 with no problems, but now there are
network access problems :
- anybody can access server resources and stations that are win2k or
win2kpro
- there are win98 stations that cannot be accessed until the respective
station is restarted ( and after restart the wonder doesn't last longer than
half an hour ).
What do I mean by "cannot be accessed" is that when you dclick a computer a
windows pops out and and asks for an username and a password ( that is if
you are connecting from a win2k or a winxp - "Incorrect pass or unknown
username for \\nameofthestation", Connect as:...; Password: ... - and of
course that no username and password works ).
If you are connecting from a win98 machine the message is " You must supply
a password to make this connection. Resource \\nameofthestation\IPC$ ;
Password... - and of course that no password is good.
It's like you are not connected to the domain, but than again from the
station that you couldn't connect to, you can connect to all the NT based
machine and to some win98 computers.
- network is about 40 computers
- 50 installed licenses per device ( but Licensing tells that the maximum
usage is 17 )
- in event viewer there are no critical or warning messages, and in the
security log there are 538,540 and 576 all success audit type.
- there is a win2ksrv ADC, which has no errors too
If anybody has a clue where should I start looking it would be a much needed
help.
Thank you
- 5
- 6
- 7
- SVCS >> Install Reporting Services under WindowsXPHow can I install Reporting Services server under Microsoft Windows XP
professional ? What version of SQL Server and Reporting Services i have to
use for it ? I already tried to install Developer edition it it does not
works.
Please help me !!!
Igor.
- 8
- 9
- SVCS >> formula's in Report serivcesI am currently migrating all our Crystal reports over to Reporting Services and I am having a few issues that I am hoping someone else has already had. In Crystal you can set up formulaâ??s and trigger them during the report, theses formulaâ??s are triggered in the order of the report being printed, so if you wanted to keep a running total you could clear it in the Group header, total it in the details and print it in the Group footer. I have tried this in reporting services but donâ??t seem to have got it right.
In my report I have a lot of EANâ?? codes.
EAN has a Qty
Each EAN may be in many Locations.
Each Location has a Location type
Only one location for Each EAN will be of type PICK.
I wanted to sum the qty so I grouped on SKU. In the group header I trigger the code.ClearLocation
In the Details I trigger the code code.SetLocation
In the group footer I trigger the code.ShowLocation
This should show the Pick location in the group footer but it doesnâ??t. Does this work in reporting services?
Custom Code :
Dim LocationLOC AS String
function ClearLocation() AS String
LocationLOC = ""
ClearLocation = LocationLOC
End Function
function SetLocation(ByVal LocationType As String, ByVal LOC As String) AS String
If LocationType = "PICK" then
LocationLOC = LOC
End if
SetLocation = LocationLOC
End Function
function ShowLocation() AS String
ShowLocation= LocationLOC
End Function
- 10
- Compact >> Splashscreen problem (partly...)This is quite a strange one...
My device is WM6 and I am developing on CF 1. I have written a splashscreen
on a new form and call it from form1 like so...
public Form1()
{
this.MinimizeBox = false;
splash form = new splash();
form.ShowDialog();
InitializeComponent();
}
This sort of works perfect for me on my device (though I actually do get a
gap between the splash screen and the program where I can see what was on
screen before, though I am not too concerned).
I have deployed the app to a WM5 device. I run the app and my splashscreen
appears, disappears (as it should) but then the app just doesn't appear,
however, if I click the icon again, the app actually starts without the
splash screen, which suggests that the app is actually running from first
click, just not visible.
Any ideas?
My splashscreen form code is...
public splash()
{
this.FormBorderStyle = FormBorderStyle.None;
this.WindowState = FormWindowState.Maximized;
this.BackColor = Color.White;
Timer timer = new Timer();
timer.Interval = 4000;
timer.Tick += new EventHandler(timer_Tick);
timer.Enabled = true;
InitializeComponent();
}
void timer_Tick(object o, EventArgs e)
{
this.Close();
}
(There was a this.TopMost = true; but that failed to compile for some
reason.)
--
Best regards,
Dave Colliver.
http://www.AshfieldFOCUS.com
~~
http://www.FOCUSPortals.com - Local franchises available
- 11
- Crm >> Permission to view Service Calendar?What permission do I need to set to allow people assigned a security role to
view the Service Calendar?
I want to be able to allow groups of people to view the entire calendar.
- 12
- 13
- 14
- SBS >> How to install Exmerge in SBS 2003?I downloaded the Exchange 2003 tools from MS but can't find a way to install
them. Could you give me step-by-step, please. The directions I've found so
far all lead to dead ends.
--
Axel Larson
"The more it does for you,
the more it does to you"
|
|
|