| Having problems at startup with windows installer |
|
 |
Index ‹ Windows XP ‹ Windows XP Support
|
- Previous
- 1
- Windows XP Setup >> XP Home over W98- please helpI have been trying to install XP Home on my older desktop
for some time;
Finally I totally re-formated the HD's and started clean.
It doesn't have many periferals - all the printers, etc.
run on a home network from another machine.
First, installed the orignal W98 which apparently runs
very well. Didnt add much in way of programs - actually
nothing on the first attempt.
When I go through the XP installation (upgrade) it goes
on and on and then suddenly stops with the message -
"Setup has discovered that drive C: is corrupted and
cannot be repaired. Setup cannot continue". This is about
1 minute from the end.
I have run Scandisk, etc. Can any one suggest next step?
the machine has 390 or so MB memory; the drives are 10 GB
and 40 GB respectively. Machine ran very well in W2K. But
installing the Sp's always killed it. Any suggestion
would be greatly appreciated.
- 2
- Windows XP Hardware >> problemsi'm using xp home. recently i tried to install a gamepad
but it doesn't work. so in the end i uninstall it.
unfortunately, now everytime i start my computer, a
window pop ups saying it has found a new hardware and
suggests that i install the hardware. this is very
frustrating coz the hardware is not even connected! i
suspect it is bcoz when i ran the installation for
gamepad last time, it registers a value in my registry.
what should i do?
thanx in advance
- 3
- Windows XP >> outlookhi can someone help
i have set up a new user accont for windows xp and it seems ok, but for some
reason outlook keeps crashing but its ok with other users
thanks leeroy
- 4
- Windows XP >> WTFOWhat the F___ is goin g on with this )(%_)@%(&*_%() Win XP.
I'm really ready to reload my ME and go back to a stable
operating system.
I've had problems constantly in the past 30 days since I've
bought this *%&@%&* XP upgrade.
I load the online updates, and I keep getting these
messages that there are windows files that are not
authorized. So I have to constantly keep the XP upgrade
disk in the CD tray. Two weeks ago I uploaded the %*)&#%(*
nupdates, and it froze before XP completely loaded.
Today I thought they'd fixed any bugs, and was doing OK
until I started getting these dialog boxes that there were
files that weren't XP compatable files. Now I figure that
the new new update files weren't known by the files
checking on the disk. But the stupid butt heads didn't
allow a way to tell the old files that these updates were
compatable? WTFO?
I'm serious. I'm thinking about reloeding my ME and trying
to get my money back... This XP sucks.
And where in HELL can I get a straight answer of what
hardware is compatable? I've looked everywhere. Can't get a
straight answer anywhere. I have a PII 160 MB RAM system.
I've been told I need a Min of a PIII and 256 MB RAM. Where
does it say that?
Fix this PIG,
It ain't working for me,
Dale
- 5
- Windows XP MovieMaker >> No device indicatedI have a Mini DV and a IX CIU computer with windows xp with movie maker . It came with no instructions and I feel i,m
missing something. It says there is no device for video hookup. Could really use some help.
- 6
- 7
- Windows XP Hardware >> mscoree.dll missing file HELPMy computers gone mad!!!! everytime i have a scroll bar on
the right hand side it slides up and down by itself making
it very hard to click on something specifiek or even to
read a long text. I have done a Norton scan which tells
me that I am missing the file mscoree.dll from the
folder 'installshield'. Can anyone help me its driving me
crazy.
- 8
- Windows XP >> coolWWW removalDoes anyone know how to get this off my system and keep
it off? It is connected with a hijacker which resets my
homepage to Maximumsearch I believe. My spysweeper
sofetware catches and deletes it and keeps it from
changing my homepage, but when I shut down, it will
reappear.
- 9
- Windows XP Security >> Fatal System ErrorI use XP pro, and I was trying to block access to the C:\
drive to all users but myself. Once I had done this, and
logged off, I could not log on again. When I tried to
restart, there was a screen that read "autochk program not
found - skipping AUTOCHECK" which then bounced to a blue
screen that read: STOP: c000021a {Fatal System Error} The
session Manager Initialization system process terminated
unexpectedly with a status of 0xc0000022 (0x00000000
0x00000000). Then, the system shuts down, and the same
thing occurs everytime I attemp to bootup again. This
seems like a pretty serious problem, any help is much
appreciated. Thanks.
- 10
- Windows XP Perform Maintain >> CTRL +ALT + DELI have a process running called IvhIdsvc.exe which is
using 100% of the CPU. If I stop this process my machine
runs ok, but with it on my machine is so slow. Tried to
find this file but its not visable on my HDD. Also the
net has not yielded any results. Can anyone help.
- 11
- Windows XP >> Why Is This Happening?I have recently upgraded to Windows XP Home Edition.
From time to time a window pops up that tells me that it
is trying to install Office 2000. The bar shows that
something is being loaded for a few moments, then another
window opens that tells me that the feature that I am
trying to use is not available, please insert your Office
2000 disk into the drive.
This appears to happen randomly and at times that I am
not aware that I am trying to use an Office 2000
feature. For example, this last occured when I
attempeted to search for a file using the search
feature. I have had Office 2000 installed for several
years and never had this happen when I was using Windows
98SE.
So far this appears to only be an annoyance, but I would
like to know what is going on.
- 12
- Windows XP >> How can I change boot drive to C?Hi. While trying to assist my niece to install WinXP over the phone a
few weeks ago, something got crossed or misinterpreted and I found out
recently that she installed XP to her H drive instead of her C drive.
Her H drive is now nearly full and the much larger C drive is almost
empty. Short of reinstalling her system more carefully, is there a way
to easily change her system drive to C, along with her profiles, etc?
Thanks in advance.
- 13
- Windows XP Support >> CHKDSK incorrectly identifies and deletes in-use security descriptI was troubleshooting Speed Disk (Norton Utilities defragmenter) to determine
why it would not run on the scheduler.
Here is the event log entry:
Event Type: Error
Event Source: Speed Disk service
Event Category: None
Event ID: 1027
Date: 9/25/2005
Time: 1:08:20 PM
User: N/A
Computer: DGQ28531
Description:
Optimization of Drive C: not started: Drive integrity check failed. Please
run CHKDSK /F before optimizing this drive
--end of event logâ??
And so I ran chkdsk first and Speed Disk started OK. It looks like I have to
run chkdsk /F prior to every time I want to run Speed Disk. Not being very
happy with that arrangement I decided to look into what chkdsk was finding
and fixing. I found some chkdsk associated errors in the event log. Here is
one example of what it found and fixed:
Event Type: Information
Event Source: Winlogon
Event Category: None
Event ID: 1001
Date: 9/27/2005
Time: 1:12:37 PM
User: N/A
Computer: ABC12345
Description:
Checking file system on C:
The type of the file system is NTFS.
Volume label is Main File System.
Cleaning up minor inconsistencies on the drive.
Cleaning up 12 unused index entries from index $SII of file 0x9.
Cleaning up 12 unused index entries from index $SDH of file 0x9.
Cleaning up 12 unused security descriptors.
CHKDSK is verifying Usn Journal...
Usn Journal verification completed.
CHKDSK is verifying file data (stage 4 of 5)...
File data verification completed.
CHKDSK is verifying free space (stage 5 of 5)...
Free space verification is complete.
40106272 KB total disk space.
11522908 KB in 95081 files.
34012 KB in 7769 indexes.
0 KB in bad sectors.
185552 KB in use by the system.
65536 KB occupied by the log file.
28363800 KB available on disk.
4096 bytes in each allocation unit.
10026568 total allocation units on disk.
7090950 allocation units available on disk.
Internal Info:
00 a8 01 00 cc 91 01 00 a6 40 02 00 00 00 00 00 .........@......
08 09 00 00 02 00 00 00 c1 03 00 00 00 00 00 00 ................
4c c2 8e 03 00 00 00 00 2c 00 58 2b 00 00 00 00 L.......,.X+....
e2 5b 8f 05 00 00 00 00 52 82 ba e1 02 00 00 00 .[......R.......
ec 95 2e 62 01 00 00 00 ea 43 94 7a 04 00 00 00 ...b.....C.z....
99 9e 36 00 00 00 00 00 a0 39 07 00 69 73 01 00 ..6......9..is..
00 00 00 00 00 70 4d bf 02 00 00 00 59 1e 00 00 .....pM.....Y...
Windows has finished checking your disk.
Please wait while your computer restarts.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
--end of event logâ??
Associated with my past running of chkdsk there are other similar errors for
both hard drives in the event logs. Some common data to all errors is:
Cleaning up 6 unused index entries from index $SII of file 0x9.
Cleaning up 6 unused index entries from index $SDH of file 0x9.
Cleaning up 6 unused security descriptors.
Cleaning up minor inconsistencies on the drive.
Cleaning up 21 unused index entries from index $SII of file 0x9.
Cleaning up 21 unused index entries from index $SDH of file 0x9.
Cleaning up 21 unused security descriptors.
I did a Google on â??index $SII of file 0x9â?? and found this KB:
http://support.microsoft.com/kb/831374/ The CHKDSK utility incorrectly
identifies and deletes in-use security descriptors
WHOA! So running chkdsk is a more serious problem than not being able to
defrag. But I have to run chkdsk to fix the errors so the defrag program
Speed Disk will run on the scheduler.
KB831374 says to fix the problem obtain the latest service pack. Here is
the Windows version and service pack info for this PC:
Windows XP Home Edition Service Pack 2 (build 2600)
OS Version 5.1.2600 (WinXP Retail)
Windows XP
SP2
no verification data KB811113[SP] on 8/20/2004 (details...)
SP3
passed verification KB834707 on 10/14/2004 (details...)
passed verification KB867282 on 2/9/2005 (details...)
passed verification KB873333 on 2/9/2005 (details...)
passed verification KB873339 on 12/14/2004 (details...)
passed verification KB883939 on 6/15/2005 (details...)
passed verification KB885250 on 2/9/2005 (details...)
passed verification KB885835 on 12/14/2004 (details...)
passed verification KB885836 on 12/14/2004 (details...)
no verification data KB885884 on 10/14/2004 (details...)
passed verification KB886185 on 12/14/2004 (details...)
passed verification KB887472 on 2/9/2005 (details...)
passed verification KB887742 on 2/22/2005 (details...)
passed verification KB887797 on 12/14/2004 (details...)
passed verification KB888113 on 2/9/2005 (details...)
passed verification KB888302 on 2/9/2005 (details...)
passed verification KB890046 on 6/15/2005 (details...)
passed verification KB890047 on 2/9/2005 (details...)
passed verification KB890175 on 1/12/2005 (details...)
passed verification KB890859 on 4/13/2005 (details...)
passed verification KB890923 on 4/13/2005 (details...)
passed verification KB891781 on 2/9/2005 (details...)
passed verification KB893066 on 4/13/2005 (details...)
passed verification KB893086 on 4/13/2005 (details...)
passed verification KB893756 on 8/10/2005 (details...)
passed verification KB893803 on 4/13/2005 (details...)
passed verification KB893803V2 on 5/18/2005 (details...)
passed verification KB894391 on 8/10/2005 (details...)
passed verification KB896358 on 6/15/2005 (details...)
passed verification KB896422 on 6/15/2005 (details...)
passed verification KB896423 on 8/10/2005 (details...)
passed verification KB896428 on 6/15/2005 (details...)
passed verification KB896727 on 8/10/2005 (details...)
passed verification KB898461 on 6/29/2005 (details...)
passed verification KB899587 on 8/10/2005 (details...)
passed verification KB899588 on 8/10/2005 (details...)
passed verification KB899591 on 8/10/2005 (details...)
passed verification KB900930 on 8/1/2005 (details...)
passed verification KB901214 on 7/12/2005 (details...)
no verification data KB903235 on 7/12/2005 (details...)
The latest service pack is already installed on this PC.
So where do I go from here?
- 14
- 15
- Windows XP >> Map a USB Drive Letter?Greetings,
I'm using XP at work and have an external hard drive connected through a USB
port. When I first attached it, the drive was designated "E:" and all went
well.
I don't leave it running constantly, and generally turn it off overnight,
though it does remain connected to that same USB port 24/7.
This morning I had to add some files to my computer using a different
external drive through a different USB port. The original external drive was
shut off at the time.
I connected the 2nd drive and the system assigned it the "E:" letter. This
wasn't a big deal, as I simply meant to swap some files and be done. I did
have to turn External #1 on to access some of the files, and it was assigned
as drive "F:" which, again, was no biggie.
Well, now my 1st drive is ALWAYS the "F:" drive. It's a problem for day to
day operation as I have a LOT of shortcuts pointing to it as the "E:" drive.
I figured maybe it was always F: because the other one had been turned on
first.. so I turned just the 1st drive on.. and it's F:... then I tried
turning them both on.. the 1st external drive is still F: and the 2nd one is
E:... I tried re-booting and a few other things I don't remember (though
some of them involved cussing) and nothing works.
I didn't try renaming the volumes as they are descriptive and the 2nd drive
is used on other computers at times, and I'd really rather leave volume
names alone. My system originally saw the 1st as "E:"... it set up the 2nd
as "E:" all by itself without my permission.. so I know the capability is
there for it to set the 1st drive BACK to "E:"...
I looked at trying to map it.. but that only seems to work for network
drives not USB-connected drive.... so.. how does one 'map' a 'local'
drive or restore a drive's original letter???
Thanks
Shane
|
| Author |
Message |
Wesley
|
 Posted: Mon Aug 13 01:29:21 CDT 2007 |
Top |
Windows XP Support >> Having problems at startup with windows installer
Everytime i load my computer it tries to install the drivers for a printer i
dont use anymore. Since the drivers are non existent i keep getting this
error message that tells me the drivers cannot be found. I dont want it to
load at startup or try to install anymore! What do i need to do to get this
thing to stop trying to install these drivers. It is so annoying!
Windows XP986
|
| |
|
| |
|
sillyputty
|
| Posted: Mon Aug 13 01:29:21 CDT 2007 |
Top |
Windows XP Support >> Having problems at startup with windows installer
On Aug 12, 4:58 pm, PaCMaN <EMail@HideDomain.com> wrote:
> Everytime i load my computer it tries to install the drivers for a printer i
> dont use anymore. Since the drivers are non existent i keep getting this
> error message that tells me the drivers cannot be found. I dont want it to
> load at startup or try to install anymore! What do i need to do to get this
> thing to stop trying to install these drivers. It is so annoying!
Go to control panel, printers and faxes and see if the nonexistent
printer is there. If so, right-click on it and hit delete.
--
"Your estimated wait time is 8 minutes; your actual wait time may
vary." Microsoft tech support
|
| |
|
| |
|
bojimbo26
|
| Posted: Mon Aug 13 06:44:34 CDT 2007 |
Top |
Windows XP Support >> Having problems at startup with windows installer
On Sun, 12 Aug 2007 16:58:01 -0700, PaCMaN
<EMail@HideDomain.com> wrote:
>Everytime i load my computer it tries to install the drivers for a printer i
>dont use anymore. Since the drivers are non existent i keep getting this
>error message that tells me the drivers cannot be found. I dont want it to
>load at startup or try to install anymore! What do i need to do to get this
>thing to stop trying to install these drivers. It is so annoying!
Have you looked in the startup menu to see if its there ?
|
| |
|
| |
|
PaCMaN
|
| Posted: Mon Aug 13 13:56:01 CDT 2007 |
Top |
Windows XP Support >> Having problems at startup with windows installer
"EMail@HideDomain.com" wrote:
> On Sun, 12 Aug 2007 16:58:01 -0700, PaCMaN
> <EMail@HideDomain.com> wrote:
>
> >Everytime i load my computer it tries to install the drivers for a printer i
> >dont use anymore. Since the drivers are non existent i keep getting this
> >error message that tells me the drivers cannot be found. I dont want it to
> >load at startup or try to install anymore! What do i need to do to get this
> >thing to stop trying to install these drivers. It is so annoying!
>
> Have you looked in the startup menu to see if its there ?
>
I tried looking in the control panel as well as the startup list and i
cannot find it. The printer is not listed on my printer and faxes thing. It
still tries to load. I found an article on microsoft about an installer fixer
but the link is dead. Any other suggestions?
|
| |
|
| |
|
PaCMaN
|
| Posted: Mon Aug 13 13:58:00 CDT 2007 |
Top |
Windows XP Support >> Having problems at startup with windows installer
"sillyputty" wrote:
> On Aug 12, 4:58 pm, PaCMaN <EMail@HideDomain.com> wrote:
> > Everytime i load my computer it tries to install the drivers for a printer i
> > dont use anymore. Since the drivers are non existent i keep getting this
> > error message that tells me the drivers cannot be found. I dont want it to
> > load at startup or try to install anymore! What do i need to do to get this
> > thing to stop trying to install these drivers. It is so annoying!
>
> Go to control panel, printers and faxes and see if the nonexistent
> printer is there. If so, right-click on it and hit delete.
> --
> "Your estimated wait time is 8 minutes; your actual wait time may
> vary." Microsoft tech support
>
>
Tried to do that and the printer is not there any other advice??
|
| |
|
| |
|
Gerry
|
| Posted: Mon Aug 13 14:38:24 CDT 2007 |
Top |
Windows XP Support >> Having problems at startup with windows installer
Use Autoruns to find any unwanted start ups!
http://www.microsoft.com/technet/sysinternals/ProcessesAndThreads/Autoruns.mspx
You should only use to remove left over entries after you have
uninstalled the hardware.
--
Hope this helps.
Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~
PaCMaN wrote:
> "EMail@HideDomain.com" wrote:
>
>> On Sun, 12 Aug 2007 16:58:01 -0700, PaCMaN
>> <EMail@HideDomain.com> wrote:
>>
>>> Everytime i load my computer it tries to install the drivers for a
>>> printer i dont use anymore. Since the drivers are non existent i
>>> keep getting this error message that tells me the drivers cannot be
>>> found. I dont want it to load at startup or try to install anymore!
>>> What do i need to do to get this thing to stop trying to install
>>> these drivers. It is so annoying!
>>
>> Have you looked in the startup menu to see if its there ?
>>
>
> I tried looking in the control panel as well as the startup list and i
> cannot find it. The printer is not listed on my printer and faxes
> thing. It still tries to load. I found an article on microsoft about
> an installer fixer but the link is dead. Any other suggestions?
|
| |
|
| |
|
| |
|
Index ‹ Windows XP ‹ Windows XP Support |
- Next
- 1
- Windows XP Hardware >> ??email worm questionemail worm question
i have two email addresses...aol and yahoo.
both have address books and have my name listed
with the opposite email address. if these worm
virus are spreading by looking at my addressbooks
why do i not get same message in both email account.
there are nothing blocked in either account.
- 2
- Windows XP >> device manageri went into Device Manager and underMonitors there are two listed.also under
my printer it also has two on one it says the Manufactor is Microsoft and the
other it says HP.i have a HP printer.i was wondering if there is suppose be
two under both printer and monitoer when all i have is one printer and one
monitoer.under detais for the monitoer it has the same numbers on both the
same thing for the printer.i was wondering if there is suppose to be two of
each when i onley i have of each installed.?
- 3
- Windows XP Security >> Accessing previously protected filesI had a bunch of old documents in My Documents folder that I copied to
another computer. Then I did a clean installation on the original computer
and copied the documents into the new My Documents folder. However, I can't
access any of my old documents or folders because they were protected. How
can I override the user rights on the old folders?
- 4
- Windows XP MovieMaker >> Capturing AudioNot sure if anyone has the same experience. I was trying to capture a footage
from my DV (that was a dub from a VHS tape). Video was capturing fine but the
audio was very choppy, full of clips and hiss. I am using a dual Xeon 2.4G,
1G ram, 120G Sata Drive. My audio is Sound Blaster Audigy 2 ZS. OS is XP SP2.
Appreciate if someone can share knowledge.
- 5
- Windows XP MovieMaker >> FREEZING I CANT STOPOk i've got a similar problem to others on here...and i've visited
papajohn.org but i can't understand what they're saying on there....telling
me to use things that they dont explain where to find them or how to use them.
WMM keeps freezing when i try to capture video. I have an adaptec 1100
video converter and when i click to capture and set the audio source to the
adaptec converter and start to capture, it immediately locks up and even
ctrl/alt/delete wont close it and i have to just shut the computer off
manually. can someone please tell me what to do, this is really frustrating.
- 6
- Windows XP >> Windows Media Player Copying ImagesI am trying to take a screen shot of a short cartoon playing through
windows media player. I do the usual print screen thing but it doesn't
seem to be working properly. The image that I cut only appears as a
black box which acts like a window. As I move the black box around the
screen it shows a different part of the image.
Is there anyway I can get around this or does it sound like the film
has been protected in some way?
Thanks.
--
technologyteach
- 7
- Windows XP Perform Maintain >> Generic Host Process for Win32 Serviceshi friends,
there is an error reporting everytime i start the system
error sees like this
Generic Host Process for Win32 Services
Generic Host Process for Win32 Services encountered a problem and needed to
close.
This error occured on 3/24/2005 at 10:57:05 PM (time I shut the PC off)
Please tell Microsoft about this problem........
Send error Report......
everyghing comes sames all the time except the time and date?
could you help me understand what is this Generic Host Process for Win32
Services
any solution....
I have a P4 2.4 Ghz ASUS P4VP-MX motherboard with 256 MB ram
thankX in advance
- 8
- Windows XP Network >> DNS query timeout settings?In the XP resource kit in the section on querying DNS servers
(http://www.microsoft.com/resources/documentation/Windows/XP/all/reskit/en-us/Default.asp?url=/resources/documentation/Windows/XP/all/reskit/en-us/prjj_ipa_vitx.asp)
, it says that a client will query it's first DNS server, wait one second for
a positive response, then query the next server, then wait two seconds for a
positive response then query all configured DNS servers. Is there a way to
adjust these timeout settings?
Thanks in advance.
- 9
- Windows XP Security >> shared folderOn an XP Pro machine I set up a folder and shared it to
other machines on the network - mostly win98. On machines
that needed the data, I set up drive mappings to the
shared folder. The application getting data worked fine.
A few days later, the mappings are OK and the files
visible, but all the other machines are getting read only
access to the data. On the XP machine sub directory
properties show a gray read only check box. Clearing the
grayed check appeats to work, but does not.
Also I do not find a seperate Security tab on the file or
directory property sheet.
- 10
- Windows XP Support >> USB-SCANNER REAGIERT NICHT MEHR :-((GROßE PROBLEME mit CanoScan LiDE 20
SIE SIND MEINE LETZTE HOFFNUNG !!!!
Seit 14 Tagen habe ich die Fehlermeldung: "Scangear CS: KEINE
RÜCKMELDUNG vom Scanner. Überprüfen Sie die Verbindung" -
Ich suche nun schon seit 2 Wochen verzweifelt nach einer Lösung in den
Foren und Informationsportalen - erfolglos !!!!
Nach dem 1. Anschluß im Februar 2005 funktionierte der Scanner auf
meinem neuen PC noch ohne Probleme - aber vor 14 Tagen nach dem
Einschalten des PC kam es beim Scannversuch zum 1. Mal zur o.g.
Fehlermeldung. Seitdem konnte ich das Problem nicht mehr lösen.
FOLGENDE MAßNAHMEN habe ich bisher probiert:
Der Scanner wird ohne Fehler im Gerätemanager angezeigt. Mein System ist
"WinXPpro SP1", AMD XP 3000 MHz, Motherboard ASROCK K7S8XE mit Chipsatz
SIS K7S8X. Ich habe installiert die Firewall "Sygate". und en
Antivirusscanner "NOD32". Es gibt KEINE Ausrufezeichen im Gerätemanager.
a) Ich habe beim Chipsatzhersteller die neusten Chipsatztreiber
installiert und ein aktuelles Motherboard Bios aufgespielt.
b) Ich habe bestimmt schon 15 mal die Gerätetreiber "SCANGEAR , die
Canon-Toolbox und die USB-Treiber über den Gerätemanager und auch über
die CANON-Original-CD deinstalliert und nach PC-Neustart OHNE
angeschlossenen Scanner neu installiert. Der Scanner wird dann nach dem
Anschließen immer wieder automatisch erkannt und fehlerfrei installiert.
C) Auch die Verwendung des CANON-Deinstallationstools änderte daran
nichts. Im Gerätemanager, steht, beim USB-Port, das der Scanner mit 500
mA versorgt wird.
d) Auch die Deaktivierung dea USB2.0-Unterstützung im Bios änderte nichts.
Laut SIS-Homepage wird die USB-2.0-Unterstützungstreiber schon von
Microsoft durch das SP1 angeboten bzw. mitinstalliert. Die erneute
Installation des SP1 änderte den Zustand auch nicht.
e) EIN TEST an meinem NOTEBOOK mit Win200 SP4 ergab, das nach der
Installation der Treiber der Scanner EINWANDFREI erkannt wird und über
eine beliebige Fotosoftware gescannt werden kann. Überhaupt kein Problem
!!! Also ist der Scanner und das Kabel i.O..
==> Auf meinem PC habe ich 3 Systeme parallel installiert Windows98,
Win2000 mit SP4 und WinXP pro mit SP1. Auf allen 3 Betriebssystemenn
wird der Scanner einwandfrei erkannt und installiert. Beim Starten und
Abklemmen und Neu-Anklemmen des Kabels ruckt der Scanner ganz kurz und
die Scannerlampe schaltet sich ein und geht wieder aus. ABER wenn ich
dann über ein beliebiges Programm oder über eine Scanner-Test-Software
einen Test durchführen will, dann passiert gar nichts und es kommt zur
FEHLERmeldung " Der Scanner reagirt nicht, bzw. keine Rückmeldung vom
Scanner"
f) der START der Canon Toolbox 4.1.3.1 dauert verdächtig lange (ca. 15
sekunden) - startet dann aber erstmal ohne Fehler. Wenn ich dann über
einen beliebigen Punkt etwas scannen möchte, dann muß ich wieder ca. 30
sekunden warten - (es erscheint die Windows-Eieruhr) und dann kommt
wieder die Fehlermeldung "KEINE RÜCKMELDUNG vom Scann, möglicherweise
sind die Kabel getrennt" UND DANN noch die 2. MELDUNG !! ?=>
"TWAIN-QUELLE kann nicht geöffnet werden - Überprüfen Sie die Verbindunf
und starten Toolbox neu".
G) der nächste Versuch war - alle anderen Geräte von den
USB-Anschlüssen abzuklemmen (z.Bsp. mein USB-Drucker "Canon S600",
welcher an jedem meiner 6 USB _Anschlüsse problemlos funktioniert und
nur den USB-Scanner allein zu betreiben --- LEIDER AUCH ohne Erfolg
H) zum Schluß habe ich dann Windows XP nocheinmal über das bestehende
System drüberinstalliert und das Scanner -Kabel an alle USB-Anschlüssen
(4 hinten und 2 vorn) getestet - überall das gleiche Problem.
FAZIT : ICh weiß nicht mehr weiter - ich habe keine Erklärung dafür,
warum der Scanner an meinem langsameren NOTEBOOK mit Win2000
funktioniert und an meinem PC auf einmal nicht mehr ????
Können Sie mir bitte HELFEN ... WAS kann ich jetzt noch tun ? GIBT es
ein DIAGNOSETOOL, was mir weiter hilft? Könnte es ein Spannungsproblem
sein oder ein SOFTWARE-Problem ???
- 11
- Windows XP >> Sony Vaio PCG-GRT170 Driver HelpHello everyone,
I recently purchased a Sony Vaio PCG-GRT170. It came installed with
Windows XP Home. I wiped the hard drive and did a clean install of
Windows XP Pro. There are several drivers that are unavailable and
that I can't seem find anywhere on the internet. Mainly the video and
sound drivers. Does anyone have the original drivers from the
\windows\drivers folder on the same machine that they could send to
me?
Thanks,
Lance
- 12
- Windows XP >> Another Virus Masquerading as Microsoft E-MailVirus Masquerading as Microsoft E-Mail - A new mass-mailing virus is on the
loose on the Internet, this one masquerading as a message from Microsoft
Corp. about a cumulative security patch. Known as either Swen or Gibe, the
virus arrives in an e-mail message with a subject line of "Microsoft
Critical Patch" and an executable attachment.
[Reminder: Microsoft NEVER sends emails with attachments to general users.]
http://www.eweek.com/article2/0,4149,1273249,00.asp
- 13
- Windows XP Hardware >> Windows XP DVD+RW SupportI'm not sure if the issue that follows is a function of Nero having been
installed or not. Well, let me explain this perplexing issue and get some
direction.
The OS does not recognize a DVD+RW with regards to writing. I can view the
contents of any DVD or CD but the OS thinks a DVD+RW is CD+RW and abandons
the "format", "write to", etc commands immediately. I cannot write to a
brand new DVD+RW, DVD+R, etc. but can read any media in the Sony DVD drive.
I honestly can't recall if this issue was present before I installed Nero
but to reduce the variables, I uninstalled Nero to see what would happen. No
change was observed. I now have no ability to write to a DVD unless I
reinstall Nero. I would rather use the OS' native abilities to manage
DVD+RWs.
Note that the Sony drive has the latest drivers, Device Manager is "happy"
with the hardware, etc.
Any suggestions would be greatly appreciated.
Thanks!
Gene
- 14
- Windows XP Setup >> Slow responsiveness after SP2Several of the computers are slow to respond after SP2 updates.
Specifically, when I click Start, I get the bottom half of the list (Run -
Programs) right away but it takes 20 seconds for the top half to show up. If
I don't wait for the top half to show up and click or hold the mouse over
programs, it takes 20 seconds for the secondary list to show up.
This is happening on about 10 of 90 computers after updating to SP2, If I do
a complete reload from a formatted drive and do SP2 before any applications
are loaded the problem goes away, but that is way time consuming.
Also slow to browse the network.
Any help with where to look?
Rob
- 15
- Windows XP >> Windows Explorer Visual Basic++ Runtime ErrorIn Windows XP Pro, when non-Administrator (Power Users)
attempt to open Windows Explorer (or search, My Computer,
etc.), they get Error Message of "Microsoft Visual++
Runtime Library"; "Runtime
error!"; "Program=C:\WINDOWS\explorer.exe""; "This
application has requested that thte Runtime terminate it
in an unusual way. Please contact the application's
support team for assistance"
THe problem developed about a month after installation
and Windows Explorer works fine with "administrator"
privilege.
Any ideas?
|
|
|