 |
|
Index ‹ Windows XP ‹ Windows XP
|
- Previous
- 1
- 2
- Windows XP Perform Maintain >> deletedPlease help. I deleted something in my computer the other
day. I then shut my computer down but am not able to get
back into my computer. The screens that show the computer
info. ram, memory, system, etc. are as far as I can get
then after the 3 screens it goes back to the first screen.
What do I do?
- 3
- Windows XP Support >> Printing To Lexmark X5250I have had some problems with my USB not recognizing my printer device. This
just started about 3 weeks ago. It used to work just fine but now I can't
fix the problem even with troubleshooter. Please advise.
- 4
- Windows XP Setup >> Start Up Error, syscpy.exeIt seems that I got a bug in my system that McAfee
cleaned up for me. Now every time I start up or reboot, I
get an error page that says " syscpy.exe has encountered
a problem and needs to close." All programs seem to be
operating normally, but this message informs me something
is not working correctly. Any suggestions would be
helpful.
Thank You in advance,
Bret
- 5
- Windows XP Support >> screen size????????????why did the toolbar or taskbar at bottom of my screen double in size thereby
decreasing my window size?? and how do i get it back? my icons on the task
bar are stacked 3 high?? thank you pete rynas
- 6
- Windows XP Security >> migrate.exe - Entry point not found (during SP2 update)Toward the end of the SP2 update, it stopped and gave me the error msg in my
subject line. The error msg then said "The procedure entry point GetIUMS
could not be located in the dynamic link library MSDART.DLL". I ended up
having to restart to get out of the error msg. I then uninstalled the SP2 and
did a system restore. Any help on this error msg would be extremely helpful.
--
tsiebert
- 7
- 8
- 9
- Windows XP >> BAD_POOL_HEADER error after using DiscWizardI have recently used the Seagate DiscWizard software (by Acronis) to image
and clone my system. After running the clone for a few weeks I discovered
that NTbackup causes a BSOD (BAD_POOL_HEADER, Stop code 0x19, parameter 1 is
0x20). The problem is almost identical to that described in posting "backup
using shadow copy causes blue screen stop" by what
bobfnospam@duxsysnospam.com. If volume shadow copy is disabled, the backup
works properly.
I found that the problems with NTbackup could be fixed by using System
Restore after booting up the clone, to return to a checkpoint made before the
cloning (or imaging) operation. Pesumably, this resets something in the
registry or system files that has been corrupted by DiscWizard.
Unfortunately, I'm not convinced this is the only corrupted aspect of the
system though. Prior to using DiscWizard, my system has been stable for 6
months at least. After restoring the image, I have found other strange things.
For example, the system event log was truncated to the day before the image
was performed, where-as it previously went back to about Feb 2007. More
ominously, I now find that the system is inconsistently updating file access
times. Sometimes it does, sometimes it doesn't. It seems to be totally
random.
I continued working on the original clone for some weeks before I realised
there were problems, when I used NTbackup for the first time since cloning.
However, in tracking down the NTbackup problem, I also discovered that
indexing had been corrupted, system restore was dead, and the sound had gone.
I tried correcting these, but in the end found it was better to start over
again from the system image.
Now my system seems superficially OK, except for not updating the file
access times consistently. Can anyone suggest a fix for this problem?
Is there some utility (other than sfc) I can use to check my system is not
corrupted in some way? I would rather avoid a repair install. I only have a
slow dial-up, so re-downloading years of Windows updates is not an option!
Thanks for any advice...
- 10
- Windows XP >> iexplore.exe application errori get this ever time i close a window or a profile they
have different numbers such as oxo1e83738 or oxo2133728
can someone tell me how to stop this from comming up all
the time. thanks
- 11
- Windows XP >> close telnetI realize this isn't a python newsgroup, but this is mostly a windows
question....
Currently, I'm launching a telnet window with a python call like this:
TSS_Handle = subprocess.Popen("start telnet.exe -f " + TSS_Log_Path + "
localhost 6000", shell=True)
which is essentially the equivalent of typing
"start telnet.exe -f myLogFile.txt localhost 6000"
into a command window. The problem is that I can't close the telnet
session I create (with any conventional python methods that I know of).
Is there a way to close all telnet windows currently open or some
other method which will perform a telnet termination ?
- 12
- Windows XP Perform Maintain >> Loaded WIN XPHome SP1a with Norton Anti-Virus ONAfter load SP1A with Norton Anti-Virus ON, I am having
problems with searching (Blank gray Search Companion
window), NONE for various file types including Internet
Explorer, Drive, etc ...
Any ideas on how I can recover the file associations - I
don't have a back-up of the registry file, or any other
backup for that matter.
Any help is greatly appreciated.
- 13
- Windows XP >> BSOD Upon Restart/Shutdown - On Two Different PCs - HELP!!!I have had two of my HP Pavilion PCs recently (over the last two weeks) start
to have BSOD problems at restart/shutdown. I get the famous
IRQL_NOT_LESS_OR_EQUAL (0x0A) error, with not much more info as far as the
driver issue, etc. Both machines exhibit the same error codes of memory.
This leads me to believe that some recent SW event on both machines occurred,
and not likely a HW issue. I have tried everything I can think of. In to
Safe mode. Disable all apps and services. Driver verification (which really
screwed my PC up enough that I had to recover a Norton Ghost image from 45
days ago. Same BSODâ??s continue to occur!! Even after a few times with the
old image restore, something in the system causes the BSOD. I have tried not
downloading updates from MS and Norton for my programs. I am so
frustrated!!! I see other folks here and there are having some problems with
this. Can anybody help me? Thanks in advance!!!
- 14
- Windows XP >> I 386 folderi had to reformat my computer can anyone tell me haw to copy the I 386 folder
to my computer from the windows cd thanks.
- 15
|
| Author |
Message |
Masta
|
Windows XP >> file transfer wizard
I'm trying to use XP File transfer wizard to transfer
from my Compaq EvoN1000v to a Dell Latitude. I have both
connected with a serial cable (compaq is connected using
the port replicator since it doesn't have a built in
serial port). When I get to the "auto detect port"
section, both computers show the searching, please stand
by message but never find the port. After 10 min, I
cancel out the file transfer.
any ideas? should it be taking this long? am I not
being patient enough. Any help would be greatly
appreciated! thanks
Windows XP987
|
| |
|
| |
 |
| |
|
Index ‹ Windows XP ‹ Windows XP |
- Next
- 1
- Windows XP Support >> Excel 2002 gridlines are erasedI have somehow managed to erase the gridlines in some of the rows of my excel
document. How do I replace them? I am not talking about turning the
gridlines on or off - they are completely "gone." The cell or row has white
space around the area where the gridlines usually are shown.
- 2
- Windows XP >> Installing Update 1 of 1 message when shut down PCI am running Win XP Pro. When I shut down the PC, it alternates text between
"Installing Update 1 of 1" and "Please do not unplug or shutdown your
computer." The PC spent 16 hours or so doing "Installing Update 1 of 1"
with no visible progress. Hwo can I fix it?
- 3
- Windows XP >> Can not preview or print web pagesI have a Pentium II 333mhz PC with a fresh rebuild of XP
Pro and I.E 6 with all the lastest service paks and
recomended critical patches. Everything works perfect
with this system except for the fact it can not print
preview or print web pages. This is the same symtom I had
before I rebuilt this PC. I can not find any articles
anywhere that explains a fix. I know XP Pro should not be
installed on a 333MHz pc but it appears to work fine
other then this issue. Any advice is appreciated
- 4
- Windows XP >> printer will not print using color cartridgeI have Windows XP. I have a Lexmark Z11 printer. I
don't have any trouble getting it to print any documents,
pages off the internet, etc. in black and white. It did
print with the color cartridge 12A1980. It won't print in
color now. It attempts to, but does print clearly. I have
looked through my troubleshooting manual, but can't
figure it out. Manual can show me how to reset the
defaults, but I am not that familiar with setting
defaults. Would appreciate any help. Thanx!
- 5
- Windows XP >> DEP and Generic Host Process for Win 32 Services -- Errors!! HELPHi Everyone,
Iv had an ongoing problem for a couple of months now and it seems to
come down to this. I get the following DEP error message: "To help
protect your computer,Windows has closed this program. Name: Generic
host process for WIn 32services. Publisher: Micrsoft Corp."
The following message then appears: svchost.exe - application error. The
instruction at "0x009996bc" referenced memory at "0x0000000". The memory
could not be "written". Click on ok to terminate the program. Click on
CANCEL to debug the program.
I've searched article ID: 875351. But it really does not help.What often
follows is a cascade of services crashing out with abnormal
terminations. Please help it's making me terminally mental!!
- 6
- Windows XP Support >> cd drive file systemIn my computer,CD drive (D:) properties, the file system says "unknown" and
the local disk (C:) is NTFS. The question is how do I "CREATE" a applicable
file system for this drive and what should it be?
- 7
- Windows XP Network >> "disabled" Internet connection sharing is actually workingI have three computers using XP's internet connection
sharing and firewall and all can access the internet. It
is however strange on one of the client computer that it
displayed a "disabled" internet gateway. When I tried to
enable it, it showed connecting...connected... but
still "disabled". It however can access the internet and
only that the window messenger in this machine cannot get
connected.
History on this machine is that I have tried to uninstall
the window messenger and outlook express and then
reinstall them again. Is these related with this strange
disabled ICS while I am still able to access the internet?
- 8
- 9
- Windows XP Support >> Using 'system recovery'I have an HP Pavilion 533W. It stopped and I get nothing but a black screen.
I've tried to install the 8 'system recovery disks for XP Home Edition. It
will not accept the disks, but gives me the message: Boot from ATAPI CD-Rom:
No Emulation, No System Disk or disk error. Any suggestions?
--
maryann
- 10
- Windows XP Network >> Direct Cable Connection Between XP and 98SEI have a relatively new desktop running Windows XP (Home
Edition). I also have an older laptop running Windows 98
(Second Edition). I am trying to set up a direct cable
connection between the two. I have set up similar
connections with the laptop before, but never with my desktop.
I tried to set up my desktop as the host, by creating an
"Incoming Connection" option in my "Network Connections"
Control Panel. I could not get this to work, however.
When I tried to connect my laptop as guest, it would say
that the Parallel cable on LPT1 was disconnected.
I then set up my laptop as the host, and created a "Direct"
connection to it through my "Network Connections" Control
Panel. When I connect in this way, the two computers do
connect, and I get an icon in my system tray telling me
the connection speed and bytes sent and received.
However, I then tried to access my laptop through my
desktop, and ran into troubles. I went to "My Network
Places", "Entire Network", "Microsoft Windows Network", and
finally to "Mshome" (this is the name of my workgroup).
When I double-click on "Mshome", I get an hourglass, and
finally get the following pop-up error box:
Microsoft Windows Network
"Mshome is not accessible. You might not have permission
to use this network resource. Contact the administrator of
this server to find out if you have access permissions.
"The list of servers for this workgroup is not currently
available"
I have only one user account on each machine, and they are
both the same name (neither have password protection), so
don't think it's a username/permission problem, but I could
be wrong.
I then searched the Microsoft Knowledge Base and found
Article 298804 stating that I should not have a firewall
set up (I originally did) to do direct cable connections.
However, I undid the option for that connection, and ever
restarted my desktop computer, but got the same result.
Any help you can provide would be greatly appreciated.
- 11
- Windows XP Update >> SP2 CD Install hangs at Registry BackupWhile trying to install SP2, it starts the installation
but hangs or freezes when it starts to Backup Registry
Files. I turned off McAfee Firewall and Virus Scan and
exited SBC Yahoo DSL Gateway 2 trying to shut down its
firewall. Does anyone have a workaround?
- 12
- Windows XP >> Changing a folder from shared to private.So, i have a folder that is in my shared documents that i want to erase but
it will not allow me too. i think that this is because it is not private not
sure. it is taking up a lot of space and i need to get rid of it. help would
be greatly appreciated.
- 13
- Windows XP >> Runtime Errors - What are these?I just purchased a new Dell 2.8 with Windows XP and this
is the most up-to-date and powerful computer I've owned
in my years of using windows and PCs, but for some reason
I keep getting Runtime errors when I browse the web. In
the last 30 minutes I've gotten "A RUNTIME ERROR HAS
OCCURRED. DO YOU WISH TO DEBUG? LINE: 1206 LENGTH IS
NULL OR NOT AN OBJECT" on one website. Then on other I
got, "Runtime error... LINE: 39 ...". It seems to happen
every 3 or 4 sites I click on with dozens of different
line numbers, and whenever I click to DEBUG them, I go
into some programming screen that is well beyond the
skills of mortal men. Does anyone have an idea why these
keep coming up on a new PC on a new Windows Operating
System? Thanks. Jeff
- 14
- Windows XP Update >> Windows Update headacheHello,
Windows Update has been running for several weeks now. It will get to about
46% complete, then I will get a pop up message from Norton Internet Security
showing that â??windows updateâ?? is trying to access my bank account number (it
will show the majority of the account numbers that I identified to the NIS
program to be on the watch for). Why does Windows (or Microsoft) need that
data? It also appears that Windows update is then proceeding to restart the
update because I blocked it from getting the bank account number. It starts
fast; slows down around 30% completes then wants the bank account number at
46% which I block from being transmitted. Are there simply a bunch of
different updates that I am getting, or is Windows starting the whole
process back up?
Thanks very much,
Scott Leslie
- 15
- Windows XP Setup >> systsecure32Whenever I log off XP Pro I get a close program box hat
says it is finishing a task .. then I get an error
message that systecure32 isn't responding. I would really
like to stop it. Any help appreciated.
RB
|
|
|