 |
|
Index ‹ Windows XP ‹ Windows XP
|
- Previous
- 1
- Windows XP >> Soiund RecorderHello,
I am using XP SP2 with all the updates. Is there a way to adjust settings
in the Sound Recorder so that it will record more than one minute at a time?
--
Thanks,
Bob
- 2
- Windows XP Hardware >> FUJIFILM Compatibility w/XPFujifilm's digital S3000 camera driver will not load into
my Windows XP computer. Thought it was a bad disc, so
downloaded the driver from Fuji. It also did not load.
Are Fuji and Microsoft compatible?
- 3
- Windows XP Network >> Renaming VPN ConnectionWhen I attempt to rename a (disconnected) VPN connection, the following
message is displayed:-
---------------------------
Error Renaming Connection
---------------------------
Cannot rename this connection. (null)
---------------------------
OK
---------------------------
Is this a known bug?
--
Chris Hills | Tel: +44 (0)1527 572754
IT Services | Fax: +44 (0)1527 572901
North East Worcestershire College | Web: http://www.ne-worcs.ac.uk/
- 4
- Windows XP Security >> Limit user to certain partitionsI have an XP Pro machine that has three partitions. The C drive is the system
drive with Windows and programs. The other 2 partitions are just for data.
There are 2 users on this computer. The first user is the boss at the office
so he has access to both of the "data" partitions. However, the boss would
like the other user to have access to just one of the two "data" partitions.
How can this be done? Group Policy? I know that a Basic User in XP Pro has no
permission to access to any admin's personal folders, but how can I apply the
same security to not folders but a whole partition?
- 5
- 6
- Windows XP Security >> Making backup files on another computer.So my computer is not working, but I want to backup my documents. I took out
my hard drive and put it in another computer as a secondary drive, but when I
tried to open my documents on this computer, it said access is denied. (I
believe this has to do with my old computer being password protected)
- 7
- Windows XP Security >> pixelpwr32 system not accessed after trojan.gema12/25/03 norton detected virus. scan found pixelpwr32
infected with trojan.gema and been accessible since.
triedunder safe mode to reverse changes in registry and
found under HKEY_local and HKEY_current and deleted them.
everytime a start computer stil shows that pixelpwr can't
be accessed. help
- 8
- Windows XP Setup >> Lost HardwareHi
I don't know if this is the right place or not but here goes.
I have a problem in that my CD drive disappears from Explore at the end
of a day if it has not been used often during the day.
The only way to get it back is to restart the Computer.
Cheers Alex
- 9
- 10
- Windows XP >> windowsXP and asp.netI have not been able to successfully run the asp.net
debugger in the auto mode - I followed the guidance in
the error help section. Is this an XP bug or my personal
problem?
Thank you!!!
- 11
- Windows XP >> automatic reactivate diskis there a way that i can make windows XP automatically reactivate a disk
rather than i have to go into the disk management and do it manualy.
i mean windows can detect the connection of the disk so it would be nice if
it could also reactivate it.
- 12
- Windows XP Update >> NO_MORE_IRP_STACK_LOCATIONSAfter applying latest round of critical security updates from MS for Win XP
Home SP2 on Feb 13, Windows will no longer start normally. I get BSOD and
the message above.
I have been to knowledgebase and have tried increasing DrfIrpStackSize to
10 (and 20) in registry and it does not fix problem.
No new hardware was installed and I have removed all USB and periphals
possible with no effect.
About every fourth or fifth attempt I get message
PAGE_FAULT_IN_NONPAGED_AREA.
Have rolled back with System Restore to well before updates were applied,
with no affect.
Have also disabled all startup software again with no effect.
- 13
- customize >> Standard XP Folder IconsI've been searching and hunting for more of the standard folder icons that
match the ones Microsoft includes with Windows XP. (The ones that are an
image of a partially open folder with a graphic at the top.) Haven't had much
luck finding any that are usable. Does anyone know if there is some secret
place that these "XP" style icons can be acquired? I've seen many of the
newer icon packages and don't care for them. - Thanks much for any advice.
- 14
- Windows XP >> a simple questionHi, I have a simple question for whch I have found differing arguments even
on MVP sites. As I have got quite good advice here before, I'm trying here.
'Should one turn off system restore before scanning, or IF malware is found,
after scanning. I know a clean restore point should be made if malware has
been successfully cleaned. But why does some advice say to turn off before
scanning? Thx a lot.
- 15
- Windows XP Security >> User Privileges in XP HomeI think I may be fighting the inevitable but here goes!
I need to install some Oracle software on a new laptop
that has XP Home as the OS. The software I need to put
on there requires certain User Privileges to be set to
allow it to operate. This is easily done in XP Pro, NT
etc but I've never tried installing this software on an
XP Home machine before.
I need to know if there is anyway of setting user
privileges in XP Home as I can't find a way anywhere so
far. I am almost certain this has been restricted or is
not available for XP Home but maybe there is a way round
this? FYI the three extra privileges I need to grant to
the Administrator user are 'Act as part of the operating
system' - 'Increase quotas' - 'Replace a process level
token'.
As I said, I am almost certain this can't be done with XP
Home. XP Pro is no problem but I really need to set up
this software on a machine that is running XP Home. Any
help at all will be very gratefully received.
Thanks!
|
| Author |
Message |
rob48ster
|
 Posted: Mon Nov 06 22:02:01 CST 2006 |
Top |
Windows XP >> slipstream xpsp2
-- hello
i have been fooling with trying to get sfc /scannow to run for months. i
made myself a xpsp slipstream cd (using autostream)
like all the techs said to do , well it still asks for the xp cd which is
already in( my cdrom drive is working fine).
i got the windows sourcepath set at E:\ and windowsNT sourcepath set at
E:\ is this right or should they be e:\ or maybe e:\1386?
i have the ServicePackSourcePath at c:\windows\ServicePackFiles and the
ServicePackCache at
c:\windows\ServicePackFiles\servicePackCache , but there is no
ServicePackCache folder when i open ServicePackFiles theres a 1386 folder.
my dllcache folder is at c:\windows\system32 is this the right place?
well help me if you can
thanks
larry
Aspire X-Superalien 500W
Asus P4c800E Deluxe
Intel P-4 800 3.0G 1mb cache
Crucial 2x 512MB DDR400
2x WD 80GB Sata 150 7200rpm 8M
Ati Radeon 9800XT 256MB
Audigy 2ZS
Windows XP , home
Windows XP597
|
| |
|
| |
|
Ramesh,
|
| Posted: Mon Nov 06 22:02:01 CST 2006 |
Top |
Windows XP >> slipstream xpsp2
Larry,
As you have created a slipstreamed XP, fix the "ServicePackSourcePath"
registry value. It should point to E:\
--
Regards,
Ramesh Srinivasan, Microsoft MVP [Windows XP Shell/User]
Windows® XP Troubleshooting http://www.winhelponline.com
"larry" <EMail@HideDomain.com> wrote in message
news:EMail@HideDomain.com...
-- hello
i have been fooling with trying to get sfc /scannow to run for months. i
made myself a xpsp slipstream cd (using autostream)
like all the techs said to do , well it still asks for the xp cd which is
already in( my cdrom drive is working fine).
i got the windows sourcepath set at E:\ and windowsNT sourcepath set at
E:\ is this right or should they be e:\ or maybe e:\1386?
i have the ServicePackSourcePath at c:\windows\ServicePackFiles and the
ServicePackCache at
c:\windows\ServicePackFiles\servicePackCache , but there is no
ServicePackCache folder when i open ServicePackFiles theres a 1386 folder.
my dllcache folder is at c:\windows\system32 is this the right place?
well help me if you can
thanks
larry
Aspire X-Superalien 500W
Asus P4c800E Deluxe
Intel P-4 800 3.0G 1mb cache
Crucial 2x 512MB DDR400
2x WD 80GB Sata 150 7200rpm 8M
Ati Radeon 9800XT 256MB
Audigy 2ZS
Windows XP , home
|
| |
|
| |
|
Plato
|
| Posted: Tue Nov 07 13:38:03 CST 2006 |
Top |
|
| |
|
| |
|
Index ‹ Windows XP ‹ Windows XP |
- Next
- 1
- 2
- 3
- Windows XP Security >> Weird Security Settings Blocking IEHey everyone;
I have been setting desired restrictions on the local
Guests group of a computer in a Workgroup. For some
reason, when a User who is a meber of this group runs
Internet Explorer 6 they cannot run ActiveX, Java, or
Flash. I have made sure they have read access to the
C:\Windows\System32\Macromedia folder and their Internet
Options are allowing ActiveX and Java to run.
What am I missing?
Thanks!
-C_Guy
- 4
- 5
- Windows XP >> KazaaI had requested earlier for aid in removing this
program. The suggestions didn't work. If anywone has
ohter ideas, I would be greatful. Mike
- 6
- Windows XP Security >> RUN dialogue in Internet Explorerhi, i was wondering if it is possible to have a RUn in
Internet Explorer. basically i want the run function (
found in the START menu ) as an HTML or JAVA code so i can
add it to my intranet.
is this possible. i really need it for a security reason
and need an answer as soon as possible
- 7
- Windows XP Security >> wmiprvse.exewmiprvse.exe found running in taskmgr prompted me to do an online security
scan at symantec.com.
scan results came back (no known virus protection found).am currently
running avg7 free.how can symantec not notice this.also is wmiprvse.exe virus
related if not what is it.
--
thanks
- 8
- Windows XP Security >> Repost of serious problemIf I try to open a file from within Windows Explorer by
double clicking on it the file fails to open and the error
message says that the file does not exist or the path may
have changed.
Reading the error message a little more carefully it is
breaking the file name at every space so trying to open a
file called "Year End Sales.xls" would give errors for no
file called year.xls then one saying no file called
end.xls then one saying no...sales.xls.
If you delete the spaces then it opens just fine
Any thought as this is a real pain!
Thanks in advance
.
- 9
- Windows XP Security >> RPC shutdown at logonWhen any user logs onto this XP Pro box it starts an RPC
shutdown with a one minute countdown and then reboots. I
can get into safe mode and not be shutdown. This happened
after an upgrade to XP Pro from Win 98.
- 10
- 11
- Windows XP Setup >> Disk Clean UpPrior to running Disk Cleanup, I empty my recycle bin, go to Local Settings
and clear out the History/ Temp / and Temporary Internet Files folders.
When I then run Disk Cleanup, it still listed files (over 400,000 kbs) under
'Temp Internet Files.' Is this a different cache than the one under Local
Settings? If so, where is it-- I would like to manually empty all traces...
- 12
- Windows XP Security >> Javascript in Content AdvisorHi,
I'm triyng to use content advisor to restrict the sites allowed for some
users.
The problem that I have is that even if a site is allowed in the content
adviser allowed sites it is blocking the javascripts.
I've found that if I know the javascript function name I can add it in the
allowed sites (it works). But I don't want to add all functions one-by-one (I
don't even know their names).
What I need is a way to allow all javascript functions running in one
allowed site (I've already add this site to the trusted sites and allowed
everything in here).
Can someone please help me with this ?
Regards,
Miguel Campos
- 13
- 14
- Windows XP Update >> Error 0x8024200D When Installing KB920342When attempting to install Update for Windows XP (KB920342)
Peer Name Resolution Protocol (PNRP) version 2.0 I get the following message:
Installation Failure
Error Code: 0x8024200D
Try to install the update again, or request help from one of the following
resources.
Does anyone know what is causing this and what the resolution is?
Thank you!
Tony
- 15
- Windows XP Hardware >> wireless notebook card resource conflictI am trying to set up a wireless home network using D-Link router (di-624)
and (DWL-G650) network card for my laptop Compac Armada M-700 in XP Pro SP2.
When I try to install the network card in the laptop it freezes the mouse
and blocks access to windows task manager. I have had to go as far as
unplugging the power cord and removing the battery to get the laptop to shut
off or reset Ctl-Alt -del did nothing
D-link says it is a resource conflict an dsent me here
HELP
Thanks
Mike
|
|
|