 |
|
Index ‹ Windows XP ‹ Windows XP Security
|
- Previous
- 1
- 2
- 3
- 4
- Windows XP Setup >> RIS and DHCP1.) I am trying to test RIS at home and I only have 1 server can I run DHCP
on the same server as RIS is installed??
2.) Is a Linksys Wireless access point going to work for RIS Setup??
3.) The reason I am asking is that I followed all the procedures and I was
unable to resolve an IP Address and locate the RIS Server.
Please help!
Jon
- 5
- Windows XP Network >> enter key not workingDear Sir,
I am having IBM R32 laptop,
when am working without connecting internet, that time
keypad enter key working properly,
but whenever i connect net, and try to compose mail, enter
key not working, i such case to operate enter key i have
to restart the laptop. i was already disscuss this issue
with IBM helpdesk, as per IBM I have update bios ver, load
ser pack 1for xp and IE. scanning done. but problem not
resolve yet.
pls provide solution as soon as possible.
regs
mangesh mahajan
- 6
- Windows XP Network >> long time to logon and failed to map network drivesHi,
I am sure whether it happenes to you or not. Sometimes it
takes so long to logon the computer to the domain like 8
minutes or something..and it failed to map those network
drives. I have no choice but to restart the computer once
again. Sometimes the problem is solved after restarting
the computer but it is getting frustrated to do it every
day as a routine. Plus sometimes all the icons and stuff
are gone after logging in.. and I also have to restart
the computer again to make the icons coming back. What
seems to be the problem? I am not logging on at a busy
time either. It would be nice if someone knows how to fix
this. Thanks
Billy
- 7
- Windows XP Setup >> Can't see D drive after upgrading to XPI just upgraded to XP (From 98SE). I have a pentium III
500mghz machine with 2 hard drives (c=20Gig(WD), and
d=80Gig(WD)). After I upgrades to XP, windows will not
recognize the D drive (although the device managers see a D
drive, but when I use explorer, it cannot read it and asks
to format it). Also, the device manager thinks that it is a
32Gig drive not 80Gig.
- 8
- Windows XP >> MSINFO32.EXECan any one help. when I try to start MSINFO32.exe
through the Help and Support Centre I get the
message "Cannot display the page
The page you are trying to view has an incorrect address
and cannot be displayed. Please try another page." If i
try to run this programme I get the same message.
Thanks
Mark
.
- 9
- Windows XP Update >> User forced to rebootWe are currently running the latest version of WSUS on Windows 2003 SP1.
The workstations are Windows XP Professional SP1.
We have set the registry settings, so that users will receive and have the
patches applied automatically. We'd like them to have the option to restart
at a later time if they choose to. Same registry settings are applied to
everyone (Admins and non-admins).
However, the non-admins receive the prompt "Your updates have been installed
successfully. To complete installation you must restart our computer. Do
you want to restart your computer now?" The "No" option is greyed out and
cannot be clicked. Only the "Yes" option is available to them.
On the other hand, the admins receive the prompt "Updateing your computer is
almost complete. You must restart your computer for the updates to take
effect. Do you want to restart your computer now?" and they have two
options available, "Restart Now" and "Restart Later".
We'd like all the users to receive the same prompt as the Admins get.
Registry export is as follows:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate\AU]
"NoAutoRebootWithLoggedOnUsers"=dword:00000001
"UseWUServer"=dword:00000001
"NoAutoUpdate"=dword:00000000
"AUOptions"=dword:00000004
"ScheduledInstallDay"=dword:00000000
"ScheduledInstallTime"=dword:00000003
"AutoInstallMinorUpdates"=dword:00000000
"RescheduleWaitTimeEnabled"=dword:00000001
"RescheduleWaitTime"=dword:00000005
"RebootRelaunchTimeoutEnabled"=dword:00000001
"RebootRelaunchTimeout"=dword:00000564
"DetectionFrequencyEnabled"=dword:00000001
"DetectionFrequency"=dword:00000003
"RebootWarningTimeoutEnabled"=dword:00000001
"RebootWarningTimeout"=dword:00000005
Thanks.
- 10
- Windows XP Support >> cannot install security updateI have a brand new pc Athlon 64 dualcore 3800, 300gb, 2gb DDR, Asus A8N
Mobo, Nvidia GeoForce 6800. Windows Media Centre 2005 windows xp Home sp2
all updates. No worms, spyware,malware, viruses, trojans etc etc.
I went to download latest security update (KB912919) and it will not
install, why could that be? I have also noticed that all of the text has
disappeared from my Help and Support page leaving only the place markers
where the text should be.
- 11
- Windows XP Hardware >> No sound!A friend of mine tried to fix my computer and downloaded
something onto a cd so that i can use to install when i
don't have any sound. does anyone know where i can do
this?
- 12
- 13
- Windows XP Network >> Windows XP Home Network FrustrationI have been trying, thus far unsuccessfully, to network my Laptop with my
Desktop. Both are running Windows XP Home for which all required updates
have been downloaded.
Computer Browser Service is started on both.
The Workgroup name is NJBPAB, the computers, respectively are named NORM_D
(Desktop) and NORM_L (Laptop).
In the hope that SKP may be able to help and, at the risk of boring everyone
to tears, the diagnostic info that I thought might be relevant follows.
Thanks in advance,
Norm Butler
Diagnostic Information:
Desktop (NORM_D)
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\Norm>ping NORM-L
Pinging NORM-L [192.168.0.62] with 32 bytes of data:
Reply from 192.168.0.62: bytes=32 time<1ms TTL=128
Reply from 192.168.0.62: bytes=32 time<1ms TTL=128
Reply from 192.168.0.62: bytes=32 time=1ms TTL=128
Reply from 192.168.0.62: bytes=32 time<1ms TTL=128
Ping statistics for 192.168.0.62:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 1ms, Average = 0ms
C:\Documents and Settings\Norm>ping 192.168.0.62
Pinging 192.168.0.62 with 32 bytes of data:
Reply from 192.168.0.62: bytes=32 time<1ms TTL=128
Reply from 192.168.0.62: bytes=32 time<1ms TTL=128
Reply from 192.168.0.62: bytes=32 time<1ms TTL=128
Reply from 192.168.0.62: bytes=32 time<1ms TTL=128
Ping statistics for 192.168.0.62:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\Documents and Settings\Norm>ping NORM-D
Pinging NORM-D.njbpab.com [192.168.0.1] with 32 bytes of data:
Reply from 192.168.0.1: bytes=32 time<1ms TTL=128
Reply from 192.168.0.1: bytes=32 time<1ms TTL=128
Reply from 192.168.0.1: bytes=32 time<1ms TTL=128
Reply from 192.168.0.1: bytes=32 time<1ms TTL=128
Ping statistics for 192.168.0.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\Documents and Settings\Norm>ping 192.168.0.1
Pinging 192.168.0.1 with 32 bytes of data:
Reply from 192.168.0.1: bytes=32 time<1ms TTL=128
Reply from 192.168.0.1: bytes=32 time<1ms TTL=128
Reply from 192.168.0.1: bytes=32 time<1ms TTL=128
Reply from 192.168.0.1: bytes=32 time<1ms TTL=128
Ping statistics for 192.168.0.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\Documents and Settings\Norm>ping 127.0.0.1
Pinging 127.0.0.1 with 32 bytes of data:
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Ping statistics for 127.0.0.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
1) \\ThisComputerByName
Shares visible - no errors displayed
2) \\ThisComputerByIPAddress
\\192.168.0.1
Error: The network location cannot be reached. For information about
network troubleshooting, see Windows Help
3) \\OtherComputerByName
Error: \\NORM-L Incorrect function
4) \\OtherComputerByIPAddress
Error: \\192.168.0.62 Incorrect function
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\Norm>ipconfig -all
Windows IP Configuration
Host Name . . . . . . . . . . . . : NORM-D
Primary Dns Suffix . . . . . . . : njbpab.com
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : Yes
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : nsw.bigpond.net.au
vic.bigpond.net.au
Ethernet adapter Local Area Connection 10:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek RTL8139/810x Family Fast
Ethernet NIC
Physical Address. . . . . . . . . : 00-40-F4-9A-A9-7B
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.0.1
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Primary WINS Server . . . . . . . : 192.168.0.1
Ethernet adapter Local Area Connection 5:
Connection-specific DNS Suffix . : vic.bigpond.net.au
Description . . . . . . . . . . . : Alcatel SpeedTouch(tm) USB ADSL
RFC1483
Physical Address. . . . . . . . . : 00-90-D0-9F-F4-65
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 10.0.0.1
Subnet Mask . . . . . . . . . . . : 255.0.0.0
Default Gateway . . . . . . . . . : 10.0.0.138
DHCP Server . . . . . . . . . . . : 10.0.0.138
DNS Servers . . . . . . . . . . . : 10.0.0.138
Lease Obtained. . . . . . . . . . : Monday, 23 August 2004 2:39:44
PM
Lease Expires . . . . . . . . . . : Monday, 23 August 2004 4:39:44
PM
C:\Documents and Settings\Norm>
Diagnostic Information:
Desktop (NORM_L)
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\Norm Butler>ping NORM-D
Pinging NORM-D [192.168.0.1] with 32 bytes of data:
Reply from 192.168.0.1: bytes=32 time<1ms TTL=128
Reply from 192.168.0.1: bytes=32 time<1ms TTL=128
Reply from 192.168.0.1: bytes=32 time<1ms TTL=128
Reply from 192.168.0.1: bytes=32 time<1ms TTL=128
Ping statistics for 192.168.0.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\Documents and Settings\Norm Butler>ping 192.168.0.1
Pinging 192.168.0.1 with 32 bytes of data:
Reply from 192.168.0.1: bytes=32 time<1ms TTL=128
Reply from 192.168.0.1: bytes=32 time<1ms TTL=128
Reply from 192.168.0.1: bytes=32 time<1ms TTL=128
Reply from 192.168.0.1: bytes=32 time<1ms TTL=128
Ping statistics for 192.168.0.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\Documents and Settings\Norm Butler>ping NORM-L
Pinging NORM-L.njbpab.com [192.168.0.62] with 32 bytes of data:
Reply from 192.168.0.62: bytes=32 time<1ms TTL=128
Reply from 192.168.0.62: bytes=32 time<1ms TTL=128
Reply from 192.168.0.62: bytes=32 time<1ms TTL=128
Reply from 192.168.0.62: bytes=32 time<1ms TTL=128
Ping statistics for 192.168.0.62:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\Documents and Settings\Norm Butler>ping 192.168.0.62
Pinging 192.168.0.62 with 32 bytes of data:
Reply from 192.168.0.62: bytes=32 time<1ms TTL=128
Reply from 192.168.0.62: bytes=32 time<1ms TTL=128
Reply from 192.168.0.62: bytes=32 time<1ms TTL=128
Reply from 192.168.0.62: bytes=32 time<1ms TTL=128
Ping statistics for 192.168.0.62:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\Documents and Settings\Norm Butler>ping 127.0.0.1
Pinging 127.0.0.1 with 32 bytes of data:
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Ping statistics for 127.0.0.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
1) \\ThisComputerByName
Shares visible - no errors displayed
2) \\ThisComputerByIPAddress
Error: \\192.168.0.62 Incorrect function
3) \\OtherComputerByName
Error: Windows cannot find 'NORM-D'. Make sure you typed the name
correctly, and then try again. To search for a file, click the Search
button, and then click Search.
4) \\OtherComputerByIPAddress
Error: \\192.168.0.61 Incorrect function
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\Norm Butler>ipconfig -all
Windows IP Configuration
Host Name . . . . . . . . . . . . : NORM-L
Primary Dns Suffix . . . . . . . : njbpab.com
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : vic.bigpond.net.au
Ethernet adapter Local Area Connection 4:
Connection-specific DNS Suffix . : mshome.net
Description . . . . . . . . . . . : Realtek RTL8139/810x Family Fast
Ethernet NIC
Physical Address. . . . . . . . . : 00-02-3F-D5-DE-CE
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.0.62
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.1
DHCP Server . . . . . . . . . . . : 192.168.0.1
DNS Servers . . . . . . . . . . . : 192.168.0.1
Primary WINS Server . . . . . . . : 192.168.0.1
Lease Obtained. . . . . . . . . . : Monday, 23 August 2004 3:14:10
PM
Lease Expires . . . . . . . . . . : Monday, 30 August 2004 3:14:10
PM
- 14
- Windows XP Setup >> microsoft.net frameworkmicrosoft.net framework has come up as an optional update available from
windows update.
I don't understand what this about and, therefore, I am hesitant to install
it. I would like to know the advantages of installing and the disadvantages
of not installing this update.
Thanks.
Bill Ridgeway
- 15
- Windows XP Support >> 0x0000008EHi
My computer recently became unstable to the point where i had to wipe the
hard drive and reinstall windows...but of course, it doesn't work; I keep
getting the blue screen of death, and an 0x0000008E error that no one seems
to be able to figure out:
0x0000008e (0xE27Ed1A4, 0x00000001, 0x808829EE, 0x00000001)
I've even reset the CMOS a few times, doesn't seem to help. Anyone have any
idea what this error means, and what i can do to fix it?
|
| Author |
Message |
pam120
|
 Posted: Sat Apr 22 11:17:16 CDT 2006 |
Top |
Windows XP Security >> REBOOT
HI IM SAM EVERY SO OFTEN MY PC KEPPS REBOOT CAN ANY ONE HELP ME PLESE RE
EMail@HideDomain.com
Windows XP946
|
| |
|
| |
|
Demmpa
|
| Posted: Sat Apr 22 11:17:16 CDT 2006 |
Top |
Windows XP Security >> REBOOT
SAM HELP ME NOW wrote:
> HI IM SAM EVERY SO OFTEN MY PC KEPPS REBOOT CAN ANY ONE HELP ME PLESE RE
> EMail@HideDomain.com
more information
or change computer
--
/
Demmpa
|
| |
|
| |
|
Malke
|
| Posted: Sat Apr 22 17:57:17 CDT 2006 |
Top |
Windows XP Security >> REBOOT
SAM HELP ME NOW wrote:
> HI IM SAM EVERY SO OFTEN MY PC KEPPS REBOOT CAN ANY ONE HELP ME PLESE
> RE EMail@HideDomain.com
It can be very hard for a non-technical person to know what to include
in a post to a tech support newsgroup. Here is a link that will help
you with that - http://www.dts-l.org/goodpost.htm
After you have read the information at that link, come back with all
pertinent details and someone will help you.
Malke
--
Elephant Boy Computers
www.elephantboycomputers.com
"Don't Panic!"
MS-MVP Windows - Shell/User
|
| |
|
| |
|
| |
|
Index ‹ Windows XP ‹ Windows XP Security |
- Next
- 1
- Windows XP Setup >> Need help with XP Pro install to a Serial ATA drive - getting error every time and want someone to explain it please!! It's driving me nuts!!I am trying to install XP Pro with SP2 slipstreamed onto a Serial ATA Drive.
At the commencement of the process I have to press F6 to install the SATA
drivers.
Everything goes fine until I have selected the required driver and press the
Enter key to load it.
At that point I get the following error message:
"File \WINXP\fasttx2k.sys caused an unexpected error (18) at line 2113 in
d:\xpsprtm\base\boot\oemdisk.c."
I tried installing XP Pro from the original disk and got a virtually
identical error message:
"File \WINXP\fasttx2k.sys caused an unexpected error (18) at line 2108 in
d:\xpsp1\base\boot\oemdisk.c."
I have learnt elsewhere that the error (18) relates to some problem with a
file location, but I have no idea what the heck is going on.
I would really appreciate it if someone who can interpret this mess would
explain it to me please!
**********************************************************************************
The files required to install the SATA driver are loaded onto the floppy in
the root of a:\ and consist of the following files whose contents I have
opened in Notepad:
fasttx2k which contains the word "fasttx2k".
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
txtsetup.oem which contains:
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
[Disks]
d1 = "Promise FastTrak 376 Driver Diskette", \fasttx2k, \
d2 = "Promise FastTrak 376 Driver Diskette", \fasttx2k, \nt4
d3 = "Promise FastTrak 376 Driver Diskette", \fasttx2k, \Win2000
d4 = "Promise FastTrak 376 Driver Diskette", \fasttx2k, \WinXP
[Defaults]
scsi = FastTrak_TX2K_xp
[scsi]
FastTrak_TX2K_xp = "WinXP Promise FastTrak 376 (tm) Controller", fasttx2k
FastTrak_TX2K_nt5 = "Win2000 Promise FastTrak 376 (tm) Controller", fasttx2k
FastTrak_TX2K_nt4 = "WinNT Promise FastTrak 376 (tm) Controller", fasttx2k
[Files.scsi.FastTrak_TX2K_xp]
driver = d4, fasttx2k.sys, fasttx2k
inf = d4, fasttx2k.inf
catalog= d4, fasttx2k.cat
[HardwareIds.scsi.FastTrak_TX2K_xp]
id="PCI\VEN_105A&DEV_3376", "fasttx2k"
[Files.scsi.FastTrak_TX2K_nt5]
driver = d3, fasttx2k.sys, fasttx2k
inf = d3, fasttx2k.inf
catalog= d3, fasttx2k.cat
[HardwareIds.scsi.FastTrak_TX2K_nt5]
id="PCI\VEN_105A&DEV_3376", "fasttx2k"
[Files.scsi.FastTrak_TX2K_nt4]
driver = d2, fasttx2k.sys, fasttx2k
inf = d2, fasttx2k.inf
[Config.fasttx2k]
value = "", Tag, REG_DWORD, 1
Fasttx2k.cat which contains the words "fasttrak TX2100".
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
fasttx2k.INF which contains the following:
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
[FasttrakPCI_376.NT.Services]
AddService = fasttx2k, 2, FasttrakPCI_Service_Inst, Miniport_EventLog_Inst
[FasttrakPCI_Service_Inst]
ServiceType = 1 ; SERVICE_KERNEL_DRIVER
StartType = 0 ; SERVICE_BOOT_START
ErrorControl = 1 ; SERVICE_ERROR_NORMAL
ServiceBinary = %12%\fasttx2k.sys
LoadOrderGroup = "SCSI Miniport"
AddReg = pnpsafe_pci_addreg, ftsata_cache_addreg
[pnpsafe_pci_addreg]
HKR, "Parameters\PnpInterface", "5", 0x00010001, 0x00000001
[ftsata_cache_addreg]
HKR, "Parameters\Cache", "DefSize", 0x00010001, 0x00900000
HKR, "Parameters\Cache", "Flag",0x00010001, 0x00000000
HKR, "Parameters\Cache", "WriteMode",0x00010001, 0x00000001
HKR, "Parameters\Cache", "ThreadNum",0x00010001, 0x00000008
HKR, "Parameters\Cache", "HotSpareDisable",0x00010001, 0x00000000
[Miniport_EventLog_Inst]
AddReg = Miniport_EventLog_AddReg
[Miniport_EventLog_AddReg]
HKR,,EventMessageFile,%REG_EXPAND_SZ%,%11%%IOLOGMSGDLL%
HKR,,TypesSupported,%REG_DWORD%,7
[MoveMiniPort.NT]
Fasttx2k.sys
[SourceDisksFiles]
Fasttx2k.sys = 1
[SourceDisksNames]
1 = %DISKNAME1%,,,,
2 = %DISKNAME2%,,,,
[strings]
Promise="Promise Technology"
PCI\VEN_105A&DEV_3376.DeviceDesc="WinXP Promise FastTrak 376 (tm)
Controller"
REG_EXPAND_SZ=0x00020000
REG_DWORD=0x00010001
IOLOGMSGDLL="\IoLogMsg.dll"
DISKNAME1="Promise FastTrak 376 Driver Diskette"
DISKNAME2="Windows system"
fasttx2k.sys which contains complete gobbledegook except for a line near the
beginning which says "This program cannot be run in DOS mode"
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
I presume that this file has either been encrypted or compiled or
something...
Readme.txt which contains:
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
***********************************
* *
* FastTrak 376 Driver Diskette *
* *
***********************************
====================
Contents on the disk
====================
README TXT This readme file
FASTTX2K Microsoft Windows miniport disk label file
TXTSETUP OEM Microsoft Windows miniport text mode setup file
WINXP <DIR>
FASTTX2K SYS Microsoft WindowsXP miniport driver
FASTTX2K INF Microsoft Windows miniport setup file
WIN2000 <DIR>
FASTTX2K SYS Microsoft Windows2000 miniport driver
FASTTX2K INF Microsoft Windows miniport setup file
WIN98-ME <DIR>
FASTTX2K MPD Microsoft Windows98-ME miniport driver
FASTTX2K INF Microsoft Windows miniport setup file
PTISTP DLL Advanced INF file format support file
FTTKVSD VXD FastTrak utility driver
PU66VSD VXD Promise power management driver
NT4 <DIR>
FASTTX2K SYS Microsoft WindowsNT miniport driver file
FASTTX2K INF Microsoft Windows miniport setup file
================
Software Version
================
Microsoft Windows NT4 miniport driver 1.00.0.19
Microsoft Windows 2000 miniport driver 1.00.0.19
Microsoft Windows 98-ME miniport driver 1.00.0.19
Microsoft Windows XP miniport driver 1.00.0.19
Anyone who can make sense of this and help me get this damned OS installed
onto the machine will have my undying gratitude (but unfortunately I can't
afford anything else after buying XP Pro ;)
Many thanks for your help in advance,
Goggz
- 2
- 3
- Windows XP Update >> 0x800C0005Having issues with access SSL pages on IE 6 with SP1. Here is my windows update log
2004-05-31 14:23:06 18:23:06 Success IUENGINE Startin
2004-05-31 14:23:06 18:23:06 Success IUENGINE Determining machine configuratio
2004-05-31 14:23:06 18:23:06 Success IUENGINE Determining machine configuratio
2004-05-31 14:23:16 18:23:16 Error IUENGINE Querying software update catalog from https://v4.windowsupdate.microsoft.com/getmanifest.asp (Error 0x800C0005
2004-05-31 14:31:33 18:31:33 Success IUENGINE Shutting dow
2004-05-31 14:31:51 18:31:51 Success IUCTL Downloaded iuident.cab from http://www.windowsupdate.com/v4/ to C:\Program Files\WindowsUpdate\V
2004-05-31 14:31:51 18:31:51 Success IUCTL Current iuengine.dll version: 5.4.3790.2
2004-05-31 14:31:51 18:31:51 Success IUCTL Current iuctl.dll version: 5.4.3790.2
2004-05-31 14:31:51 18:31:51 Success IUENGINE Startin
2004-05-31 14:31:51 18:31:51 Success IUENGINE Determining machine configuratio
2004-05-31 14:31:51 18:31:51 Success IUENGINE Determining machine configuratio
2004-05-31 14:31:54 18:31:54 Error IUENGINE Querying software update catalog from https://v4.windowsupdate.microsoft.com/getmanifest.asp (Error 0x800C0005
2004-05-31 14:32:11 18:32:11 Success IUENGINE Shutting dow
2004-05-31 22:07:56 02:07:56 Success IUCTL Startin
2004-05-31 22:07:57 02:07:57 Success IUCTL Downloaded iuident.cab from http://www.windowsupdate.com/v4/ to C:\Program Files\WindowsUpdate\V
2004-05-31 22:07:57 02:07:57 Success IUCTL Checking to see if new version of Windows Update software availabl
2004-05-31 22:07:57 02:07:57 Success IUENGINE Startin
2004-05-31 22:07:57 02:07:57 Success IUENGINE Determining machine configuratio
2004-05-31 22:07:58 02:07:58 Error IUENGINE Already tried all proxies. Will not retry. (Error 0x80072EFD
2004-05-31 22:07:58 02:07:58 Error IUENGINE Querying software update catalog from https://v4.windowsupdate.microsoft.com/autoupdate/getmanifest.asp (Error 0x80072EFD
2004-05-31 22:07:58 02:07:58 Success IUENGINE Shutting dow
2004-05-31 22:07:58 02:07:58 Success IUCTL Shutting dow
2004-06-02 19:41:46 23:41:46 Success IUCTL Shutting dow
2004-06-03 16:45:44 20:45:44 Success IUCTL Startin
2004-06-03 16:45:45 20:45:45 Success IUCTL Downloaded iuident.cab from http://www.windowsupdate.com/v4/ to C:\Program Files\WindowsUpdate\V
2004-06-03 16:45:45 20:45:45 Success IUCTL Current iuengine.dll version: 5.4.3790.2
2004-06-03 16:45:45 20:45:45 Success IUCTL Current iuctl.dll version: 5.4.3790.2
2004-06-03 16:45:45 20:45:45 Success IUENGINE Startin
2004-06-03 16:45:46 20:45:46 Success IUENGINE Determining machine configuratio
2004-06-03 16:45:46 20:45:46 Success IUENGINE Determining machine configuratio
2004-06-03 16:45:47 20:45:47 Success IUENGINE Shutting dow
2004-06-03 18:16:02 22:16:02 Success IUCTL Shutting dow
2004-06-05 10:39:41 14:39:41 Success IUCTL Startin
2004-06-05 10:39:41 14:39:41 Success IUCTL Downloaded iuident.cab from http://www.windowsupdate.com/v4/ to C:\Program Files\WindowsUpdate\V
2004-06-05 10:39:41 14:39:41 Success IUCTL Checking to see if new version of Windows Update software availabl
2004-06-05 10:39:41 14:39:41 Success IUENGINE Startin
2004-06-05 10:39:42 14:39:42 Success IUENGINE Determining machine configuratio
2004-06-05 10:39:42 14:39:42 Error IUENGINE Already tried all proxies. Will not retry. (Error 0x80072EFD
2004-06-05 10:39:42 14:39:42 Error IUENGINE Querying software update catalog from https://v4.windowsupdate.microsoft.com/autoupdate/getmanifest.asp (Error 0x80072EFD
2004-06-05 10:39:42 14:39:42 Success IUENGINE Shutting dow
2004-06-05 10:39:42 14:39:42 Success IUCTL Shutting down
2004-06-06 15:18:51 19:18:51 Success IUCTL Starting
2004-06-06 15:18:51 19:18:51 Success IUCTL Downloaded iuident.cab from http://www.windowsupdate.com/v4/ to C:\Program Files\WindowsUpdate\V4
2004-06-06 15:18:51 19:18:51 Success IUCTL Checking to see if new version of Windows Update software available
2004-06-06 15:18:52 19:18:52 Success IUENGINE Starting
2004-06-06 15:18:52 19:18:52 Success IUENGINE Determining machine configuration
2004-06-06 15:18:52 19:18:52 Error IUENGINE Already tried all proxies. Will not retry. (Error 0x80072EFD)
2004-06-06 15:18:52 19:18:52 Error IUENGINE Querying software update catalog from https://v4.windowsupdate.microsoft.com/autoupdate/getmanifest.asp (Error 0x80072EFD)
2004-06-06 15:18:52 19:18:52 Success IUENGINE Shutting down
2004-06-06 15:18:52 19:18:52 Success IUCTL Shutting down
2004-06-06 19:22:41 23:22:41 Success IUCTL Starting
2004-06-06 19:22:42 23:22:42 Success IUCTL Downloaded iuident.cab from http://www.windowsupdate.com/v4/ to C:\Program Files\WindowsUpdate\V4
2004-06-06 19:22:42 23:22:42 Success IUCTL Current iuengine.dll version: 5.4.3790.21
2004-06-06 19:22:42 23:22:42 Success IUCTL Current iuctl.dll version: 5.4.3790.20
2004-06-06 19:22:42 23:22:42 Success IUENGINE Starting
2004-06-06 19:22:43 23:22:43 Success IUENGINE Determining machine configuration
2004-06-06 19:22:43 23:22:43 Success IUENGINE Determining machine configuration
2004-06-06 19:23:00 23:23:00 Error IUENGINE Querying software update catalog from https://v4.windowsupdate.microsoft.com/getmanifest.asp (Error 0x800C0005)
2004-06-06 19:45:53 23:45:53 Success IUCTL Starting
2004-06-06 19:45:55 23:45:55 Success IUCTL Downloaded iuident.cab from http://www.windowsupdate.com/v4/ to C:\Program Files\WindowsUpdate\V4
2004-06-06 19:45:55 23:45:55 Success IUCTL Current iuengine.dll version: 5.4.3790.21
2004-06-06 19:45:55 23:45:55 Success IUCTL Current iuctl.dll version: 5.4.3790.20
2004-06-06 19:45:55 23:45:55 Success IUENGINE Starting
2004-06-06 19:45:55 23:45:55 Success IUENGINE Determining machine configuration
2004-06-06 19:45:55 23:45:55 Success IUENGINE Determining machine configuration
2004-06-06 19:45:58 23:45:58 Error IUENGINE Querying software update catalog from https://v4.windowsupdate.microsoft.com/getmanifest.asp (Error 0x800C0005)
2004-06-06 19:48:27 23:48:27 Success IUENGINE Shutting down
2004-06-06 19:48:27 23:48:27 Success IUCTL Shutting down
2004-06-06 20:16:47 00:16:47 Success IUCTL Starting
2004-06-06 20:16:51 00:16:51 Success IUCTL Downloaded iuident.cab from http://www.windowsupdate.com/v4/ to C:\Program Files\WindowsUpdate\V4
2004-06-06 20:16:51 00:16:51 Success IUCTL Current iuengine.dll version: 5.4.3790.21
2004-06-06 20:16:51 00:16:51 Success IUCTL Current iuctl.dll version: 5.4.3790.20
2004-06-06 20:16:51 00:16:51 Success IUENGINE Starting
2004-06-06 20:16:52 00:16:52 Success IUENGINE Determining machine configuration
2004-06-06 20:16:52 00:16:52 Success IUENGINE Determining machine configuration
2004-06-06 20:16:54 00:16:54 Error IUENGINE Querying software update catalog from https://v4.windowsupdate.microsoft.com/getmanifest.asp (Error 0x800C0005)
2004-06-06 20:18:28 00:18:28 Success IUENGINE Shutting down
2004-06-06 20:23:56 00:23:56 Success IUCTL Starting
2004-06-06 20:23:56 00:23:56 Success IUCTL Downloaded iuident.cab from http://www.windowsupdate.com/v4/ to C:\Program Files\WindowsUpdate\V4
2004-06-06 20:23:56 00:23:56 Success IUCTL Checking to see if new version of Windows Update software available
2004-06-06 20:23:56 00:23:56 Success IUENGINE Starting
2004-06-06 20:23:56 00:23:56 Success IUENGINE Determining machine configuration
2004-06-06 20:23:57 00:23:57 Error IUENGINE Already tried all proxies. Will not retry. (Error 0x80072EFD)
2004-06-06 20:23:57 00:23:57 Error IUENGINE Querying software update catalog from https://v4.windowsupdate.microsoft.com/autoupdate/getmanifest.asp (Error 0x80072EFD)
2004-06-06 20:23:57 00:23:57 Success IUENGINE Shutting down
2004-06-06 20:23:57 00:23:57 Success IUCTL Shutting down
- 4
- Windows XP Perform Maintain >> Error MessagePlease tell me how to get rid of this error message that keeps popping up on
my screen. 'Windows - Delayed Write Failed' Running Windows XP HOme Edition
Advanced System Error Log reads
Thursday, 26 April 2007 Disk The device, \Device\Harddisk1\D, has a bad
block.
- 5
- Windows XP Network >> IMPROVE REMOTE DESKTOP SECURITYI am using a remote desktop connection. Immediately
after connecting to the host computer, it automatically
logs me on. My user name and password are already in
there. How can I prevent this, so my user name and
password must be typed in? I feel very vulnerable here.
I have already gone into control panel and changed the
way users log on and off to not use the welcome screen,
but I can't figure out how to use the classic logon
prompt. Thanks.
- 6
- Windows XP Setup >> missing filesafter running norton It tells me I have two missing program files and it can't fix them. first one is C:\program file\common files\install shield\professional\run time\0701\intel32\missing file mscoree.dll second one c:\windows\system32\mapisrvr.exe missing file gapi32.dll I looked on my xp disk but I can't find either one of the files anywhere. can anybody tell me what there for and how to I reinstall them? windows xp home edition
- 7
- Windows XP Network >> Lost XP LoginI have done this 3 times and now I am at a loss of what to do to correct it.
I install XP on my machine and tell it to update from the web and then
install a completely new copy on the drive.
During install I am asked for a computer name, which I give, then later a
username, which I give and I am asked to join a domain or a workgroup. I
elect domain and gain access, setup continues.
When setup is complete it re-boots and I get to the Windows Logon Screen. I
enter the password, it tells me I can't logon, I click options, select the
domain, enter the password and logon to the desktop. Thats all fine.
I can see computers on the network. I can re-boot, log off and log on, etc.
just fine.
Then I go to System properties and to change to a workgroup. I enter the
workgroup name, click OK and it tells me Welcome to the workgroup, then tells
me I have to re-boot for the changes to take effect. I re-boot.
When I get to the Windows Logon screen, I have the same username, etc.
already in the window, I enter the password and it won't let me lonon and to
make sure the username and domain are correct.
I click Options and all it does is remove the shutdown button.
I can't go any farther.
Does anyone know what is going on?
Thanks,
Wes
- 8
- Windows XP Setup >> WinXp networking to Windows VistaHave installed a new Vista PC on the network.
Can see the shared folders on the Vista PC but when trying to open any
folder, I get this message.
" \\ xxxxx\xxx is not accessible. You might not have permission to use this
network resource. Contact the administrator of this server to find out if you
have access permissions. Access is denied.
I hope you can help.
--
Eddie
- 9
- Windows XP Hardware >> Can't Read DVD-R'sHaving an issue with reading personal DVD's of late. The drive is reading
normal, musiv C.D's, movie Dvd's etc but not written DVD's on which I had
made a backup of my data. The drive was reading the written DVD's earlier but
after I rebooted my laptop last week, it behaving funnily.
My original setup is Win XP Home edition SP1. I updated it to SP2 after I
rebooted my laptop. Updated all the software updates from Windows XP also. No
idea whats causing this issue ? Would appreciate your help ?
- 10
- Windows XP Setup >> i think ive messed up my settingsmy pc is only 6 months old and was working perfectly (im a fairly new user)
anyway since installing sp2 my comp hasnt been the same, ive got loads of
stuff telling me what to do etc.. which i dont understand, & one of my fav
programes wont work, i dont have a clue what to do. is it possible for me to
send a copy of all my errors to someone? (someone told me i could) that they
could explain to me whats wrong? or can anyone tell me if there is any truth
in someone being able to comunicate with me online in which they can read &
try to fix the errors? id be so gratful for any help thanks Ellen
- 11
- Windows XP Hardware >> error HDD partitionOn my PC there are 2 HDD with 2 partition each
-C;D
-G;H
First time when I want to see on G partition something I
recive the message :not formatated .Then do you want
formated NO
After that I close the PC and when I reopen the PC in MY
COMPUTER the G partition does not exist.
What can I do ?
- 12
- Windows XP Perform Maintain >> files and settings transfer ??My question may or may not be simple...I have always had a problem with sp2
and have had to remove it more than once ..I would like to reinstall it
however I want to do it by adding my programs to it (slipstreamed xp disc)
rather than adding sp2 to my system and finding out that there is still a
problem and having to once again remove it....Can I use the files and
settings wizard to copy all my programs onto another drive then reinstall
windows on this drive than transfer them back ?? Any advice or a different
way to accomplish what I need would be incredibly appreciated...
Drew
- 13
- Windows XP >> Install Registry Entry with Startup Login ScriptHi,
I have a .bat file which has a command that installs a registry entry. I
have this .bat file execute at system startup through group policy. The
things is it not working at system startup. If i login and execute it, it
will then install. Anyone know why? is it something to do with the system not
being able to access the registry at system startup.
- 14
- Windows XP Network >> How to connect XP Home and Win2K?Hi,
currently my network system is configured as follow,
D-Link Internet Router-> desktop running Win2K
-> laptop running XP Home
i.e. the Internet Router is connecting to both desktop running Win2K and
laptop running XP Home.
Both are able to connect connect to Internet, but when I want to share or
transfer files between them it's not possible.
How do I overcome this problem?
I'm a newbie to setting up a Intranet
Thks.
Regards
- 15
- Windows XP Security >> Assigning internet access to specific users??We have one machine with Win Xp Pro and have about 15 users. It is connects
to the internet thru a DSL modem. How can I (as an administrator) prevent
specific user(s) from connecting to the internet? I am a firefighter, not a
computer whiz, step-by-step instructions would be appreciated.
--
Rich
|
|
|