| Error loading my user profile (desktop setting) |
|
 |
Index ‹ Windows XP ‹ customize
|
- Previous
- 1
- Windows XP Support >> Problem with Play Videos in Web PagesUnable to play videos in web pages. When I go to Tools, Internet Options,
Multimedia there is not a check box to tick (or the actual heading) to Play
Videos in Web Pages. I have contacted HP Help by email, and have done all
they suggested to resolve the problem. They now recommend System restore.
Instead of doing System restore, If I UPGRADED from Windows XP to Vista would
it be likely that I would still have the same problem?
- 2
- 3
- Windows XP >> Opposite of blaster!My clean install of WinXP Pro is 1 month old, but now I
cannot logoff or restart (opposite of blaster problem)!
When I select logoff or restart, the PC ignores me, so I
am forced to a hardware reset. I can wait over one hour
to prove it is not slow, it is ignoring my request to
logoff/restart.
- 4
- 5
- 6
- Windows XP Network >> svchost error at logon and no network connections availableHi,
My laptop (Tosh Sat Pro 6100 1.8GHz/1Gb) has been running
perfectly until this morning. The machine has both a
firewall (Kerio) and is running up-to-date anti-virus
software (Norton 2002).
Prior to the "Welcome to Windows" display, a "svchost.exe
Application Error (instruction 0x57d43c16 referenced
memory at 0x00000001. The memory could not be written"
message is displayed.
I am unable to see any Network Connection icons anwhere.
The devices appear in the Device Manager and can be
configured but are unable to connect to a network.
I've checked that all services are configured properly
and have tried loading the latest drivers available
(which are the ones being used previously anyway ...)
I've also followed all relevant threads in the Microsoft
KB
I can't access any of my System Restore either ...
It seems weird to be accesing an address of 0x00000001.
Any advice would be GREATLY apppreciated.
Kind regards,
Cam
- 7
- Windows XP >> Control Panel display changes.I've setup my XP Pro SP1 PC to show all folders in Details view, thru
Windows Explorer. But I don't want Control Panel to show in this format, so
i changed it to icon view.
It keeps reverting back to detailed view!? Why?
The setting "Remember each folder's view settings" is set with a tick.
--
Julian Milano
- 8
- Windows XP >> Wireless Zero ConfigurationHave set up a Netgear Wireless BB connection in an office and during an
attempt to log back into the router for wep enabling purposes my own linksys
wifi card ceases to function. I cannot see any available wifi nets as windows
cannot configure my wifi card. I have been prompted to check the " Use
Windows to configure my wireless network settings " check box. I do not have
one. I am using XP home with SP2. and have tried to uninstall the wireless
card and reinstalled. No good. The check box for the " Use Windows to
configure my wireless network settings " just does not exist...? can anyone
help please?..
Any help is appreciated well in advance!!
Thanks
Jaf
P.S. Got help from Brian, (Thanks B), and queried through the cmd prompt
whether WZC was active. I was returned the error 1060 and the message that
the specified service was not installed. Since I have re-installed the device
already and that has not solved the problem I am wondering where I might get
the softare to perform this function.
I have been on to Microsoft through their product support line and they are
willing to throw their opinion in at a cost of â?¬75 + VAT.
Is this the wall? or can I get over, under or around it?
J
- 9
- Windows XP Network >> media disconnectedhave connected 2 pc's via rj45 crossover cable, icons in
notification area say network is 100mbps and 10mbps.
Master pc is 10.10.30.1, second pc is 10.10.30.2. both on
same workgroup.
When using ipconfig, the second pc says media
disconnected, this implies a cable is unplugged, but icons
and network place icons say everything is connected and ok.
please, pleas help
- 10
- Windows XP >> WHJERE DO I FIND THE MONITOR TO UNINSTALL IN DEVICE MGRI ASKED A QUESTION AND THIS WAS THE RIGHT ANSWER I THINK EXXCEPT HE NEVER
CAME BACK AND TOLD ME EXACTLY WHATY TO INSTALL TO GET RID OF THE OLD MOTINTOR
DRIVERS (DELL 27" LCD) and make way for the gateway 19" stuff so that i could
log in without always being in safe mode
When you boot into Safe Mode, you do not use your systems video adapter in
other than SVGA mode (basic Windows Video Driver).
I believe the same with your monitor. Do you have the old monitor still and
have you tried to hook it back up?
Have you tried to uninstall the Monitor under Control Panel | System |
Hardware | Device Manager (in Safe Mode), reboot and see if Windows tries to
detect the new hardware?
Did you get any software for your monitor that you needed to load ... and
if, so did you check if there where any updates on the Manufacturers
web-site (not Windows ... a lot of times there driver updates for hardware
manufacturers is out-of-date)?
"Jill" <Jill@discussions.microsoft.com> wrote in message
news:F7855B04-D841-44CB-9E03-AEA7E6090B87@microsoft.com...
> TWO ISSUES REALLY first is I can log into windows (I have nedia center
> edition) in safe mode only ...if I am not in safe mode then I get to where
> I
> can pick my name to log in under my name and it's like it freezes i click
> on
> it and nothing happens then the computer beeps and its locked and the
> mouse
> wont budge. even on the ones with no password required ..same thing ..io
> tried to roll back to a different day to restore to and it didn't take
> ...BTW
> whats with that the last 10 times i have tried to do a restore to prior
> day
> it has never workd even once and it used to all the time ...but i digree
> when
> i am in safe mode of course nothing works the opnly thing new or different
> is
> my new monitor and earlier when i first attached the new monitor it would
> go
> through the whole start up thing and then when the names appeared to log
> in
> thru it would go "click" and restart itself any help?? and when i
> tried
> to hook up a different harddrive as a slave I got these rainbows of bands
> scrolling veertically down my screen help i need more than safe mode !!
> thx!! jill
>
Was this post helpful to you?
- 11
- 12
- Windows XP Support >> Scheduled tasks and SysprepThere is the well documented problem of Scheduled Tasks that use a system
account not running on a PC that uses a Syspreped image but I have a
situation where neither Scheduled Tasks running under a system account OR a
user account will run. Also, the "Run As" box is greyed out so I don't have
the option to run as a different user. Any ideas as to sort this would be
much appreciated. My Sysprep reference machine runs XP PRO SP2 and I have
"Ghosted" it to eight machine which all have the same problem.
Thanks,
Steve.
- 13
- Windows XP >> how to get mpeg thumbnails backJust recently I installed quicktime, and it took over
windows media player 8's mpeg file association. When I
restored mpegs to play in wmp, I was no longer able to
see thumbnails of the mpegs using the thumbnail view in
windows explorer. Can anyone help me?
- 14
- Windows XP Support >> outlookI have recently lost everything out of outlook i.e. inbox e-mails, deleted
e-mails and sent e-mails. Can anyone tell me how to find them again sorry I'm
a bit of a novice
- 15
- Windows XP Security >> Limit log on session timeIs there a way to limit log on session time in a domain that uses roaming
profiles. Not talking about limiting access hours or computers, just log on
session time, much like what can be done on a single computer at home to
limit child access time.
|
| Author |
Message |
Steve
|
customize >> Error loading my user profile (desktop setting)
I just noticed that each time I try to log on to my ,the
system throws up an error message saying that my
personalised settings (user profile) is either corrupt or
bad and can not be loaded. it then boots up with a fresh
temporary profile as if am a new user.
When I logged in as an administrator and went to control
panel-system-advanced-user porfiles. I noticed that the
profiles attached to my sign on was having status as
backup while all other had local status. what can I do to
restore my desktop setting as I cherish it so much and
have personalised software running with it.
I run a window xp professional in a domian environment.
Please your help is needed urgently
thanks in anticipation.
Windows XP1313
|
| |
|
| |
 |
| |
|
Index ‹ Windows XP ‹ customize |
- Next
- 1
- Windows XP MovieMaker >> how to fix or repair movie makerfirst my system crashed.
i reinstall with xp sp2 but movie make is not working.
i have version 2.0.3312 and i get EventType : BEX P1 : moviemk.exe
P2 : 2.0.3312.0 P3 : 3e038613
P4 : comctl32.dll P5 : 6.0.2900.2180 P6 : 4110968c P7 : 0004e183
P8 : c0000409 P9 : 00000000
C:\DOCUME~1\jo\LOCALS~1\Temp\WER42f7.dir00\moviemk.exe.mdmp
C:\DOCUME~1\jo\LOCALS~1\Temp\WER42f7.dir00\appcompat.txt
where can i find the latest version.
is it somewhere in sp2.
can i find just that download
- 2
- Windows XP >> windowsupdate.com - Internet Connection Loss After UpdateDear Group
Has anyone experienced a loss of internet connection (Verizon Broadband)
after updating Windows XP with the latest recommended Security Packs from
http://www.windowsupdate.com? E.g. When browser is opened after update,
'Page Not Found Message' is displayed but immediately before the update it
worked perfectly fine.
If yes, what's the problem and how can it best be fixed?
Microsoft Windows XP Home Edition 5.1 Build 2600.xpsp1.020828-1920: Service
Pack 1.
Thanks for your time & efforts!
Martin
- 3
- Windows XP MovieMaker >> Synching musicI've got two live lip-sych performances that I'm making into a movie. To
enhance the sound quality, I'm overlaying the original music tracks on top of
the video. The first one worked extremely well, and I was able to synch up
the music track with the video. The second track however will not stay
aligned. I position the music track so that it is synched perfectly, but
upon playback, it's just a hair off every time. I already noticed that the
second track was not in the same format as the first (.wav), so I resaved it
in .wav format and that didn't help. Any other ideas? Thanks in advance.
- 4
- Windows XP >> PowerPoint error message on WindowsXP StartUpWhen I start (or restart) Windows XP I get an error
message that reads: "Microsoft Powerpoint has encountered
a problem and needs to close".
Note: I am not attemptiing to use PowerPoint at this
time. I am only going to my desktop.
I have performed Office's Detect & Repair with no results.
Any ideas?
Thanks!
- 5
- Windows XP Network >> tcp/ip driver is invalidipconfig /all gives message: internal error . The request is not supported.
The request is not supported.
^^^^^^ Additional error message & history.
ipconfig /all "internal error"
The request is not supported.
Windows XP Pro SP 1
Ethernet connection. Netgear Wireless card also installed. Neither can
connect.
No firewall.
"DNS Client", IPSEC,"DHCP Client", will not start.
Error 1068 "dependency service or group failed to start"
There are many other services which are stopped, but I don't know if they
are important to this issue.
The problem began after attempting to upgrade to XP SP2. I wasn't present
when the upgrade to SP2 was attempted. I don't know if any error messages
occurred during the upgrade attempt.
Event Viewer:
Service Control Manager. Event ID 7000
tcp/ip service protocol driver failed to start. "specified driver is invalid".
Computer had moderate amount of spyware, & infected files, which I have
removed.
^^^^^^^^
Windows XP Pro SP 1
Ethernet connection. Netgear Wireless card also installed. Neither can
connect.
No firewall.
"DNS Client", IPSEC,"DHCP Client", will not start.
Error 1068 "dependency service or group failed to start"
There are many other services which are stopped, but I don't know if they
are important to this issue.
The problem began after attempting to upgrade to XP SP2. I wasn't present
when the upgrade to SP2 was attempted. I don't know if any error messages
occurred during the upgrade attempt.
Event Viewer:
Service Control Manager. Event ID 7000
tcp/ip service protocol driver failed to start. "specified driver is invalid".
Computer had moderate amount of spyware, & infected files, which I have
removed.
***********
things I have tried in the past 3 hours:
1. I uninstalled the wi-fi nic, turned off PC, removed wi-fi nic.
2. I uninstalled the ethernet nic, turned off PC, removed ethernet nic [
real tek chip ].
3. I turned off the PC, installed a 3 com nic & driver.
4. ran WinSockFix
5. ran LspFIX
6. Tried to repair connection, > "failed to query tcp/ip"
7. from command prompt: netsh int ip reset resetlog.txt
Here's the log, but the problem persists.
reset SYSTEM\CurrentControlSet\Services\Dhcp\Parameters\Options\15\RegLocation
old REG_MULTI_SZ =
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\?\DhcpDomain
SYSTEM\CurrentControlSet\Services\TcpIp\Parameters\DhcpDomain
added
SYSTEM\CurrentControlSet\Services\Netbt\Parameters\Interfaces\Tcpip_{355165
82-1A8C-4D62-ADB6-AC46DEF84F22}\NetbiosOptions
added
SYSTEM\CurrentControlSet\Services\Netbt\Parameters\Interfaces\Tcpip_{54AA88
38-72FC-4DEB-80D5-8C161864F171}\NetbiosOptions
deleted SYSTEM\CurrentControlSet\Services\Netbt\Parameters\EnableLmhosts
added
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{44E91C79-5C7B-45DE-BBE0-B1798AB0655D}\DisableDynamicUpdate
deleted
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{44E91C79-5C7B-45DE-BBE0-B1798AB0655D}\IpAutoconfigurationAddress
deleted
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{44E91C79-5C7B-45DE-BBE0-B1798AB0655D}\IpAutoconfigurationMask
deleted
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{44E91C79-5C7B-45DE-BBE0-B1798AB0655D}\IpAutoconfigurationSeed
reset
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{44E91C79-5C7B-45DE-BBE0-B1798AB0655D}\RawIpAllowedProtocols
old REG_MULTI_SZ =
0
reset
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{44E91C79-5C7B-45DE-BBE0-B1798AB0655D}\TcpAllowedPorts
old REG_MULTI_SZ =
0
reset
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{44E91C79-5C7B-45DE-BBE0-B1798AB0655D}\UdpAllowedPorts
old REG_MULTI_SZ =
0
added
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{8B45FF83-13BB-47E8-8BEE-E46879BF9F72}\DisableDynamicUpdate
deleted
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{8B45FF83-13BB-47E8-8BEE-E46879BF9F72}\IpAutoconfigurationAddress
deleted
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{8B45FF83-13BB-47E8-8BEE-E46879BF9F72}\IpAutoconfigurationMask
deleted
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{8B45FF83-13BB-47E8-8BEE-E46879BF9F72}\IpAutoconfigurationSeed
reset
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{8B45FF83-13BB-47E8-8BEE-E46879BF9F72}\RawIpAllowedProtocols
old REG_MULTI_SZ =
0
reset
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{8B45FF83-13BB-47E8-8BEE-E46879BF9F72}\TcpAllowedPorts
old REG_MULTI_SZ =
0
reset
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{8B45FF83-13BB-47E8-8BEE-E46879BF9F72}\UdpAllowedPorts
old REG_MULTI_SZ =
0
deleted
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\DontAddDefaultGatewayDef
ault
deleted SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\EnableIcmpRedirect
deleted
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\EnableSecurityFilters
deleted SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\SearchList
deleted SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\TcpWindowSize
deleted
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\UseDomainNameDevolution
reset Linkage\UpperBind for
PCI\VEN_104C&DEV_9066&SUBSYS_4C001385&REV_00\3&61AAA01&0&48. bad value was:
REG_MULTI_SZ =
PSched
reset Linkage\UpperBind for ROOT\MS_NDISWANIP\0000. bad value was:
REG_MULTI_SZ =
PSched
reset Linkage\UpperBind for
PCI\VEN_10EC&DEV_8139&SUBSYS_813910EC&REV_10\3&61AAA01&0&58. bad value was:
REG_MULTI_SZ =
PSched
<completed>
reset SYSTEM\CurrentControlSet\Services\Dhcp\Parameters\Options\15\RegLocation
old REG_MULTI_SZ =
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\?\DhcpDomain
SYSTEM\CurrentControlSet\Services\TcpIp\Parameters\DhcpDomain
deleted SYSTEM\CurrentControlSet\Services\Netbt\Parameters\EnableLmhosts
added
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{0BB46FB0-30DE-46B0-9FE1-8BA039766F89}\AddressType
added
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{0BB46FB0-30DE-46B0-9FE1-8BA039766F89}\DisableDynamicUpdate
reset
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{0BB46FB0-30DE-46B0-9FE1-8BA039766F89}\RawIpAllowedProtocols
old REG_MULTI_SZ =
0
reset
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{0BB46FB0-30DE-46B0-9FE1-8BA039766F89}\TcpAllowedPorts
old REG_MULTI_SZ =
0
reset
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{0BB46FB0-30DE-46B0-9FE1-8BA039766F89}\UdpAllowedPorts
old REG_MULTI_SZ =
0
deleted
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\DontAddDefaultGatewayDef
ault
deleted SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\EnableIcmpRedirect
deleted
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\EnableSecurityFilters
deleted SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\SearchList
deleted
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\UseDomainNameDevolution
reset Linkage\UpperBind for
PCI\VEN_10B7&DEV_9200&SUBSYS_100010B7&REV_78\3&61AAA01&0&58. bad value was:
REG_MULTI_SZ =
PSched
reset Linkage\UpperBind for
PCI\VEN_104C&DEV_9066&SUBSYS_4C001385&REV_00\3&61AAA01&0&48. bad value was:
REG_MULTI_SZ =
PSched
reset Linkage\UpperBind for ROOT\MS_NDISWANIP\0000. bad value was:
REG_MULTI_SZ =
PSched
<completed>
8. Searched registry for SymTDI. Not found.
9. re-installed tcp/ip on top of itself
Thanks for your help.
WC
- 6
- Windows XP >> Scheduled Task failsThe Task Scheduler returns an error when I click finish.
The error says, "The new task has been created, but may
not run because the account information could not be
set. The specific error is: 0x8007007a: The data area
passed to a system call is too small". This is the error
I receive when going through Accessories and using the
wizard for Add A Scheduled task. I first noticed the
problem scheduling my McFee Virus Scan to run as a
scheduled task. McFee told me to download the Hot Fix
from Microsoft for Article Q812400. However, this did
not resolve the problem. Does anyone else know what I
can try.
- 7
- 8
- Windows XP Perform Maintain >> desk top propertiesNormally when you go, right click on desktop>properties,
you get the tabs (display properties, settings,
backgruond,screensaver etc) but now i do the same thing
and all i get is display properties window, what happened
to the other tabs.
- 9
- Windows XP Security >> Help - XP Splash Screen No Accts to Login asWindows XP2 Home - Very Frustrating!!!
This is the second time it has happened to me within a week of being on XP2.
I re-installed the first time. Before I re-install again I want to see if
anyone can help. Ran on XP1 for a year, no problems other than the normal
adware and spyware issues. I always was able to get my set of Accounts on the
Splash Screen.
Sceanario: Logged in fine, no issues worked all day, log out and turn
machine off properly. Next time I boot. I JUST GET THE SPLASHSCREEN. No
accts to login as.
Why does this happen?????
I tried Ctrl-Alt-Delete multiple times. No Help!
I tried restoring to last know "Good" configuration No Help!
I tried Safe Mode, same thing, just Splash Screen!!!!
I initially setup 4 accounts. Normally after a successful Login Spybot
always runs. Always fines the DSO Exploit only and is corrected. Ad-Ware
Personal SE doesn't run, nor any other adware / spyware software Norton 2003
is running auto protect enabled.
- 10
- Windows XP Update >> 80248011 errorI get the 80248011 error when trying to run wiiindows update from teh
windows update website. I've followed their suggestions but it still comes
back with the same error. Cleared cache etc. renamed software distribution
directory. I'm using Windows XP.
- 11
- Windows XP >> Windows Desktop Search - no PDF indexing?I use and love the Windows Desktop Search. I was concerned that the
indexing would interfere or slow down my runnign applications but this has
not happened.
However on failing to find a PDF I have noticed in Indexing options/advanced
options/file types that thhe files extensions only go as far as "mda" which
obviously leaves out the prospect of indexing pdf files.
Can anyone advise me on this anomaly?
regards,
Beemer
- 12
- Windows XP Setup >> web page not opening?I cant get a login page to open.It just goes right back to the same page.I
had this problem a while back but cant remember how i fixed it. Same site
too.Any suggestions will be greatly appreciated. TY!
- 13
- Windows XP Support >> Boots up in safe mode-graphics card message.I had to do a system restore because when I boot up it stays in safe
mode. I have access to e mail and the net but I have the teal green
background and cannot get out of safe mode.
I have found a Unichrome graphics device that has an exclamation mark
on it. The error indicates that the device" cannot find enough free
resources that it can use. (Code 12). If you want to use the device you
will have to disable one of the other devices on this system."
Hmm. Why can't it find enough resources and exactly which other devices
do I have to disable?
Any suggestions would be appreciated.
--
martinc
- 14
- Windows XP Perform Maintain >> RPC service hung on startingWhenever I reboot my computer I get and Event ID 7022 "The
RPC service hung on starting". It starts eventually, but
I continue to have trouble with things like installing a
new printer.
This error is preceeded in Event Viewer by a error with
the acpi:
AMLI: ACPI BIOS is attempting to write to an illegal IO
port address 0xcf8), which lies in the 0xcf8 - 0xcff
protected address range. This could lead to system
instability. Please contact your system vendor for
technical assistance
Microsoft suggested updating my BIOS, but I'm not ready to
do that yet. Remember all this started when I tried to
install a firewire card.
Any suggestions would be appriciated.
Thanks,
Mike
- 15
- Windows XP Security >> Where is the 2k/XP certificate store in the registry?To all-
PGP and other programs allow the app to be pointed to different locations
for the private key store, including a floppy/CD/USB token. Thus keeping
the private key off machine for added protection. If you want to decrypt a
PGP message, slip that USB token into the slot and startup the program.
It occurs to me that the very same thing could be done with EFS, *if*
a) the local machine/personal account store can be found
b) the registry can be changed to point to a different location.
Doing this would really enhance data protection on 2k/XP.
The weakness of EFS is , (2k) using a data recovery agent and unlocking the
private keys by a simple account log on; easy enough to hijack if physical
access can be gained.
If that can be changed by moving the certs off machine, then to access a
file, just slip that CD or USB token in to place, attempt to open, the
Registry says- "Look on E:\", it goes to E: and uses the private key there.
Does anyone know where in the Registry the local machine and personal
account certificates are stored and can it redirect cert location?
Thanks
Yours-
Ridge Cook
|
|
|