 |
|
Index ‹ Windows XP ‹ Windows XP Update
|
- Previous
- 1
- Windows XP Hardware >> Mouse Freezes :(This is frustrating...
I recently formatted my harddrives and re-installed
Windows XP. Everything was working fine until my mouse
started freezing at random. It first happened during an
online game of Age Of Mythology. But it also happens
while playing the Campaign in AOM and also when I'm not
even playing the game at all. When it freezes the light
on the mouse is still on but the cursor won't move when i
move the mouse.
I made it so that Windows does not turn off the USB ports
to save energy but the problem still persits.
It is a Microsoft Intellimouse Optical 1.1A and I'm
pretty sure I have the latest driver for it (I have
5.1.2600.0)
Any help or ideas would be greatly appreciated.
Thanks
PAUL
- 2
- Windows XP >> My Documents folderHello all,
When I open my computer, in the Files stored on this computer, my folder is
empty except for the desktop. ini. When I open My Documents everything is
there, when I access thru docs and setngs everything is there. The only thing
I have done is disk cleanup, chkdsk and defrag, that was a few days ago and
to tell you the truth I'm not really sure how long this folder has been this
way. I don't usually access my docs from there. I run weekly anti virus and
spyware scans, results are clean. I don't even know if this really matters,
but all the other user account doc folders contain their documents. I've even
logged in on each user account and results are the same. Anyone have any
ideas?
--
Thanks,
PattiR
Windows XP Sp2
IE 6.0
AOL 9.0 SE
- 3
- Windows XP Network >> network problemHello,
Please advise one network problem.
When a Centrino notebook detect DHCP network in both
Wireless & Wire network, how can I select the default
gateway to the Wire network. Because I find that it choose
the Wireless network's Gateway to be the default. The O/S
is Win XP Professional.
Thanks.
- 4
- Windows XP Setup >> Cannot install ANY additional Windows ComponentsI have been trying to install Fax Services and IIS.
I am running Windows XP Professional with all Windows Updates applied
When I use the Windows Components Wizard, it does not matter which checkbox I select, the behavior is the same: it runs through the entire installation, gives me no errors, but then, the components I selected were not installed. So, for example, if I run the Wizard again, the selected checkboxes are now once again unchecked
The same thing happens in Safe mode, in Diagnostic mode....... doesn't matter
Help...!?
- 5
- Windows XP >> Outlook Express 6 and Acronis True Image ProblemI am thinking of switching from Norton Ghost to Acronis True Image for a new
machine I am putting together.
I have downloaded the True Image Trial Version and used it this morning to
back up my C: (System Drive) and my D: (Data Drive including the Outlook
Express Store Folder.) During the back up process, I did some work with
OE.
After both backup processes completed, I went to OE and found all my
Newsgroup subscriptions had disappeared. Panic time. I restored C: from
the True Image file and the subscriptions appeared just as they were before
the backup.
I wonder if any one else here uses True Image and has experienced this sort
of thing. Could it be that working in OE while the backup process was
running caused this problem?
I have Googled this to see if there might be some restrictions on using the
system (XP Home) while the back up process runs but have find none.
Thank you for any insight on this.
- 6
- Windows XP Support >> discs wont runi ran a bad disc on my new sony VGNA A230P laptop and now
my player wont play many other discs it used to play
before. they wont boot up. can you help please
thanks
joe
- 7
- 8
- Windows XP Setup >> Microsoft KeyboardI have a Microsoft Wireless Multimedia Keyboard 1.0A The problem I have is I
cannot use the Function (F) Keys. If I go into services.msc and under HID and
attempt to start the device I get - Error 2 The system cannot find the file
specified.
I have loaded the driver disk on to Windows XP Home Edition. The other keys
work as normal, it is just the F Keys.
- 9
- Windows XP Hardware >> XP Mirror driveIs it possible (after basic-dynamic conversion)to mirror
two 40GB Hardrives using only Windows XP Pro or am i
going to have to use third party software?
- 10
- Windows XP >> Mad ErrorsI recently put myself together a new computer. and while
trying to load windows XP Pro I get a large barrage of
errors. Most commonly the setup program hangs during the
installation of devices (about 3/4 done) or I get a blue
screen that says something about IRQL bieng not equal or
less... No matter what I try I cannot resole this. Can
anyone help??
I am using:
An MSI 865PE NEO2-LS Motherboard
A P4 2.6C HT with 800fsb
512 MB Kingston Dual Channel DDR
A Seagate Barracuda 80gb SATA HD
A Nvidia Geforce2 MX-400 64mb AGP
And an Artec 4x2.4x16 DVD+R
I have tried disabling the SATA altogether and using this
old beat up MAxtor 2 gig drive.. SAme errors.. Took out
the Dvd burner and put in a 16x Liteon DVD-ROM. still the
same errors.. And have totally ran out of ideas. Anything
else it could be??
- 11
- Windows XP MovieMaker >> Audio File TypesI am very new to Moviemaker! I am trying to load audio to my movie. I have
the story board setup and now have loaded music from a CD into Window Media
Player in my Music Folder. I am trying to import a song with the .WMA file
type into my movie. I always get an error message telling me that it cannot
import the music with .wma file type. HELP? :(
- 12
- Windows XP Hardware >> Bios shadowingTrying to do a new installation with Windows XP Home
edition, the installation gets to the point where it is
starting Windows, and I get a STOP errror message;
Session 3_Initialization_Failed
STOP: 0x0000006F (0xC0000020, 0X00000000, 0X00000000,
0X00000000)
I have updated the BIOS. How do I disable BIOS Shadowing?
- 13
- Windows XP >> Can't install KB929300 SP1Win XP2
My system downloads updates for .NET Framework 3.0 Service Pack 1 (KB929300)
everytime I loggin, but after trying to install it stops with message that
it was not installed. Any reasons? Thanks.
- 14
- Windows XP >> Help and SupportI am using Windows XP Pro. When I click on Start => Help and Support
=> Keep your computer up-to-date with Windows Update, a screen comes
up saying connecting.
It will not pass this connecting screen. I've disabled the firewall,
and I have run an antivirus as well as windows defender which both
come up clean.
Any help would be greatly appreciated.
Thank you
- 15
|
| Author |
Message |
Ken
|
 Posted: Wed Dec 29 15:43:00 CST 2004 |
Top |
Windows XP Update >> XP sp2 Access denied
Problem installing XP, Any ideas would be appreciated. Following from the
svcpack.log
1.582: 2004/12/29 13:57:06.323 (local)
1.582:
C:\WINDOWS\SoftwareDistribution\Download\S-1-5-18\8b5e9cdb91dddbb342695fbdc3
6fe0e4\update\update.exe (version 5.5.1005.0)
1.582: Service Pack started with following command line: /si
/ParentInfo:b2f34f7356e7e1479cd52978c48e99fd
1.582: Return Value From OnACPower = 1
1.582: OnACPower returned value( 0x1 ) which is Equal To 0x1
1.582: Condition succeeded for section OnACPower.Section in Line 1 of
PreRequisite
1.582: SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\WindowsFeatures is
not Present
1.582: First Condition in A6Block.Section Succeeded
1.582: Condition succeeded for section A6Block.Section in Line 2 of
PreRequisite
3.995: PrepareToTrustInfFile: MySetupCopyOEMInf failed: 0x5
3.995: IsInfFileTrusted: PrepareToTrustInfFile Failed: 0x5
4.105: UnRegisterSpuninstForRecovery, failed to delete SpRecoverCmdLine
value, error 0x2
4.105: DoInstallation: Failed to unregistering spuninst.exe for recovery.
4.105: Access is denied.
4.105: Service Pack 2 installation did not complete.
4.105: Update.exe extended error code = 0x5
Windows XP724
|
| |
|
| |
|
Jupiter
|
| Posted: Wed Dec 29 15:43:00 CST 2004 |
Top |
Windows XP Update >> XP sp2 Access denied
Start here:
http://www3.telus.net/dandemar/acdensp2.htm
--
Jupiter Jones [MVP]
http://www3.telus.net/dandemar/
"Russell James" <EMail@HideDomain.com> wrote in message
news:%EMail@HideDomain.com...
> Problem installing XP, Any ideas would be appreciated. Following from the
> svcpack.log
>
> 1.582: 2004/12/29 13:57:06.323 (local)
> 1.582:
> C:\WINDOWS\SoftwareDistribution\Download\S-1-5-18\8b5e9cdb91dddbb342695fbdc3
> 6fe0e4\update\update.exe (version 5.5.1005.0)
> 1.582: Service Pack started with following command line: /si
> /ParentInfo:b2f34f7356e7e1479cd52978c48e99fd
> 1.582: Return Value From OnACPower = 1
> 1.582: OnACPower returned value( 0x1 ) which is Equal To 0x1
> 1.582: Condition succeeded for section OnACPower.Section in Line 1 of
> PreRequisite
> 1.582: SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\WindowsFeatures is
> not Present
> 1.582: First Condition in A6Block.Section Succeeded
> 1.582: Condition succeeded for section A6Block.Section in Line 2 of
> PreRequisite
> 3.995: PrepareToTrustInfFile: MySetupCopyOEMInf failed: 0x5
> 3.995: IsInfFileTrusted: PrepareToTrustInfFile Failed: 0x5
> 4.105: UnRegisterSpuninstForRecovery, failed to delete SpRecoverCmdLine
> value, error 0x2
> 4.105: DoInstallation: Failed to unregistering spuninst.exe for recovery.
> 4.105: Access is denied.
> 4.105: Service Pack 2 installation did not complete.
> 4.105: Update.exe extended error code = 0x5
>
>
|
| |
|
| |
|
| |
|
Index ‹ Windows XP ‹ Windows XP Update |
- Next
- 1
- Windows XP Hardware >> Cannot Install New HardwareI am extremely frustrated with XP. Since installing SP2 I cannot install new
hardware that is supposed to be XP complient and hence has no drivers with
it. I can install devices that have drivers that come with them such as
Pinnacle AV/DV (except for the firewire port). Something as simple as CD
drive or hard disk will not install properly. (I was able to force a new disk
install by manually pointing to the directory Windows\ServicePackFiles\i386
to find the drivers. The wizard could not find the drivers on its own and
would always fail. (Code 28.) This does not work for USB or firewire devices.
I installed a new device with another firewire port and it won't load.
Pre-existing (before SP2) firewire ports are OK. Likewise with USB. A new
USB2 device won't load. I go to install drivers from the motherboard CD and
it won't let me as it says XP SP1 drivers should be used. The only drivers on
the CD are for Win2k and Win98. The same trick I used with the hard disk
won't work with the USB drive.
If anyone else has had this problem and solved it I would really appreciate
if you would tell me what you did. I suppose something in the registry is
pointing in the wrong location or there are some files missing, but I can't
figure out what.
- 2
- Windows XP Setup >> Q: Scheduling Defrag (GUI)Hello all.
I want to run the GUI version of Defrag (DFRG.MSC) as a scheduled task,
but it doesn't work as expected:
Running this .MSC from the "Run..." or DOS box works fine. But if I put
"%WINDIR%\System32\DFRG.MSC" as command-line in a scheduled task, it
just hangs there (presumably awaiting input). Either that, or it starts
and exits right away, depending on the syntax I use.
What I want is for it to run automatically -- and -- perform a disk
analysis of C:
I also tried the following construct, but alas...
"%WINDIR%\System32\CMD.exe" /C START "" /B /I
"%WINDIR%\System32\DFRG.MSC"
(with/out "/I" and "/B")
I know I can use "DEFRAG C: /A", but I want the GUI version. Besides, I
tried that too and it still runs invisibly. Annoying.
Anyone know the magic formula?
Thanks!
M.T.
PS: Please answer within thread -- email is a decoy.
- 3
- 4
- Windows XP Hardware >> "Cannot Install This Hardware" "Access is Denied"Hi,
I am unable to enable or update drivers for my display adapter (ATI
Radeon X300).
I have tried several alternatives that were posted on the Internet and
have found the problem (I hope so). However I am unable to overcome
this.
I have enabled logging whenever the operations (enabling of the
display adapter OR updating its driver) into a file C:\WINDOWS
\setupapi.log.
I further tried to set a registry value that would enable registry
updates to be logged too. (changing the value of LogLevel to FFFF).
However, this did not have any effect (the log did not contain any
additional information).
All the setupapi.log had was Error 5: Access is Denied
I suspected that there was a problem updating the registry and found
that a set of values under a group named ati2mtag was blocked. Even
though I am an administrator I could not delete or modify the contents
of this group. It denied me access.
I would really appreciate a solution, to make those set of keys
accessible once again.
Thanks in advance.
- 5
- Windows XP >> Wincallid ???Has anyone got any idea what this executable (Wincallid.exe) is? I find it
odd that google doesn't give any hits at all on 'Wincallid'. It's residing
in C:\.
I'm running xp with servicepack 2
Carsten
- 6
- customize >> Can user and admin have the same IE?Hi,
I'd like to have my user account and Administrator account
basically use the same IE or same IE "browsing
experience", in other words, have the same toolbar menus,
same Favorites, etc.
Similarly, when I install theGoogle Toolbar as Admin, it
is not installed for my user account. Can this be
accomplished?
(It'd be nice if they could have the same Desktop, too,
but one thing at a time - I'd like XP to appear no
different between these accounts.)
- 7
- 8
- Windows XP Support >> Chinese characters taking over text in other programsI installed Chinese character support so I can type in Chinese as well as
English but it turned the text and menus in my Intel ProSet Wireless program
into Chinese. I have contacted Intel that said it was a Sony laptop problem
who then said it was a Windows problem. I can no longer view help files in
this program or menu boxes in English. I appreciate any help. Thanks.
- 9
- Windows XP >> windows updateIf I go into IE6 and click on the windows update in the Tools tab
I get this information on the web page:
Thank you for your interest in Windows Update
Windows Update is the online extension of Windows that helps you get the
most out of your computer.
You must be running a Microsoft Windows operating system in order to use
Windows Update.
The system is xp pro sp1
Does anyone have a way of rectifying this problem?
Thanks for your time
- 10
- Windows XP Support >> How to get Admin password?Im fixing a Compaq pressario laptop for a friend. its got xp home, and
after installing sp2, it gets the blue screen, error stop c0000135 cant
find winsrv
the best I can do is use another winXP cd and get to the recovery console to
try and apply the fix from Microsoft
http://support.microsoft.com/default.aspx?kbid=885523#kb4
on deleting registry entries for the sp2, so it can boot.
Apparently while searching for a note about what the password might be, I
find it was sold at comp usa, and they bought a service plan, unconditional.
But guess what? they dont want to offer support, saying I needed to call
Microsoft to ask them what the Administrator password is.
It was setup by comp usa, who apparently setup the admin password. But they
say we would not know what it is and all the data will be destroyed on the
disk because the only way now is to wipe the disk and install everything
again. But I dont have any windowsXP disks, compusa kept them.
Well who cares, you have to buy xp, office, etc, not our problem. Besides,
its too complicated to work thru the registry, thats only for qualified
people, we cant help you, thats like way advanced or something.
Is there any solution?
tia
- 11
- Windows XP Support >> >pps ViewerI have two friends that forward PowerPoint files to me. The second ones I
can open. The first individuals files can't be opened, at one time in the
past I had no trouble opening them. Something in the past two to three weeks
does not recognize them as power point files. In both peoples cases I use
PowerPoint viewer 2007.
Any suggestions appreciated.
- 12
- Windows XP Setup >> ShutdownMy computer used to turn off automatically when I went to
shutdown. Now, under XP, it says "Ok to turn off
computer".
How can I fix this?
Thanks!
- 13
- Windows XP Perform Maintain >> STOP errors caused by a device driver....I hope someone can help me...
I keep getting the blue screen with STOP errors...when I
send the error report to Microsoft, they say the error was
caused by a device driver.
The only thing I've changed lately is my printer. I
uninstalled a Lexmark X73 & installed an HP1100, which I
ended up uninstalling also.
Any ideas??
Thanks,
Fun
- 14
- Windows XP MovieMaker >> MoviemakerI have a GATEWAY 300 computer with WINDOWS XP home ed. I
would like to know how I can uninstall the program
MOVIEMAKER.I have no use for this program, I will never be
into movies. I have tried the normal way but the computer
won't let me delete the program, it says THIS PROGRAM CAN
NOT BE DELETED IT IS USED BY A PERSON OR PROGRAM. Another
reason for deleting it, my e-mail is effected by it and no
support group can help me. Any help you can give will be
greatly appreciated. Thank you. Henry Dettmann.
hummel@pronet.net
- 15
- Windows XP Perform Maintain >> Internet Explorer ProblemMy brother and I run basically the same computers, Windows XP, on the same internet line. He is having a problem with Internet Explorer. Before, when he opened up I.E. it always opened up on his home page, Google.ca. Now it opens up to Microsoft Home Search (res://krrfa.dll/index.htmlC#96676), he has repeatedly tried to reset it to google.ca but it keeps reverting back to the Microsoft page. Any help would be appreciated in solving his problem, it has never happened om my computer. Thanks
|
|
|