| CDRW Burner & DVDRW Burner File Problem |
|
 |
Index ‹ Windows XP ‹ Windows XP Hardware
|
- Previous
- 1
- Windows XP Hardware >> printing envelopesOn my old microsoft Works I could print envelopes from the
address book by marking the ones I needed. Works7.0 prints
the whole list. Can anyone tell me how to print selected
addresses?
- 2
- 3
- Windows XP >> Intellipoint 4.1 Won't UninstallMy Intellipoint 4.1 software for Microsoft Optical Mouse
Blue won't UNINSTALL (using Add/Remove Programs in
Control Panel).
I'm experiencing periodic freeze-ups of my pc (XP Home) --
apparently due to my mouse -- and want to reinstall my
Intellipoint software. The software requires that I
first uninstall the current version.
However, the software may be corrupted because it won't
uninstall. Is there any way around this problem?
- 4
- Windows XP Network >> Workgroup vs DomainWe have a Windows NT 4.0 domain consisting of about 250 workstations. Our
WAN stretches over 8 states. There is a specific situation at each location
in which we have 4 to 8 pc's in what we call a "workgroup". This worked
fine in the Windows 98 days. Now we are adding a W2000 Pro or XP Pro machine
to each laocation as the "host". In other words, this is the pc that shares
it's resources. The other pc's may be W2000 Pro or W98 or a combination. If
I add all the pc's to the domain and each user is authenticated by the
domain and I share my resources to certain users of the domain, everything
is great.......until the WAN goes down and they cannot be authenticated by
the domain. Is there a better way ? Would I be better of not joining these
pc's to the domain ?
--
Jerry Fortenberry
- 5
- Windows XP >> no Product KeyI bought Microsoft Home Edition along with a case,
motherboard, CPU, 2 HDD, Vidio card, etc. The software
came as two CDs: a Windows XP Home Edition, and a Windows
XP OEM Preinstallation Kit. I have written to Newegg.com
where I bought the software (and most of the hardware) to
find out how I can get the Product Key, but I've had no
reply yet. Is there a procedure I can use if I don't hear
from them in a reasonable period of time? I have been
working on the system for a week now and am getting
anxious to get it working.
Thank you for any help.
- 6
- Windows XP Setup >> restore registry in XPHello
I have a system that will now not boot after cleaning out
some files in the registry. It boots to the login screen
but when you click on a user mesage comes up saying that
it is logging out the user. Ive tried every boot mode
posible with the same results. Now i have a legal XP Home
serial and disk but ive lost the #. Can you restore the
registry in XP through a comand prop like 98 or do you
need to reinstall. How can i recover my serial number
through a comand prompt? Please any ideas are welcome.
- 7
- 8
- Windows XP Setup >> SP2 - unable to login, activation requestsI have an ACER laptop that came with a pre installed OEM version of
Windows XP Pro. It (had) all the latest updates, but after applying
sp2 would not allow me to login under any accounts with error message
like 'could not create temp profile DETAIL - insufficient system
resources.' followed by a restart.
After logging in to SAFE mode (and it would only do this every third
boot!) the event log shows the same error, PLUS ACTIVATION errors. I
rolled back to SP1a (congrats MS - this worked perfectly) and I tried
running an installation repair, which of course required me to
re-active - which it did successfully. A second attempt produced the
same result - but with a dialogue telling me I had to activate before
I could logon. It then proceeded to do this, and I was then back to
the same scenario - 'UNABLE TO CREATE PROFILE' followed by a dialogue
with an X and and OK button. I've rolled back to SP1 successfully
again, but Windows update will soon prompt me to install SP2 again I'm
sure!
Can anyone suggest what's happening here? Rob C
- 9
- Windows XP >> Services and StartupRunning XP Home. In MSCONFIG there are tabs for SERVICES and STARTUP. Is
there any comprehensive info on what these various items do (in plain
language) and which are safe to delete from either.
For example, I found BCMSMMSG in STARTUP and found it controls my modem,
which I never use as I have broadband. I unchecked it with no ill effects.
Your help is appreciated.
- 10
- Windows XP MovieMaker >> 2 questions re: audio levels and formatquestion 1- is it possible to have the audio at different levels during the
same clip? i know how to raise the volume and mute, but for instance, could i
have the audio level loud at the beginning of the clip and slowly fade out by
the end of the clip?
question 2- if i'm saving clips as WMV but want to record back to tape
later, will i be able to convert to AVI or do i have to capture as AVI to
start? reason being untill i know what clips are really going to be used i
want to conserve disk space. basically the question is can i convert WMV
clips to AVI?
- 11
- Windows XP Perform Maintain >> WindowsXPStartUp ProblemThe following are my system particulars:
OS Name Microsoft Windows XP Professional
Version 5.1.2600 Service Pack 2 Build 2600
OS Manufacturer Microsoft Corporation
System Name HABEEB
System Manufacturer INTEL_
System Model D845GBV2
System Type X86-based PC
Processor x86 Family 15 Model 2 Stepping 7 GenuineIntel ~2400 Mhz
BIOS Version/Date Intel Corp. RG84510A.86A.0033.P17.0307141128, 14/07/2003
SMBIOS Version 2.3
Windows Directory C:\WINDOWS
System Directory C:\WINDOWS\system32
Boot Device \Device\HarddiskVolume1
Locale United States
Hardware Abstraction Layer Version = "5.1.2600.2180
(xpsp_sp2_rtm.040803-2158)"
User Name HABEEB\S.M.Habeeb Mohamed
Time Zone India Standard Time
Total Physical Memory 1,024.00 MB
Available Physical Memory 673.01 MB
Total Virtual Memory 2.00 GB
Available Virtual Memory 1.96 GB
Page File Space 2.39 GB
Page File C:\pagefile.sys
I purchased Microsoft XP Professional with Service Pack 2 (OEM)from one of
one of Microsoft Gold Certified Partners in Chennai, India and installed the
same in my system on 07-09-2006, registered the product and activated the
same. Since there was some problem like memory dumping the windows was
repaired making use of the OEM CD. Now the problem is during booting the
following messages appears:
â??Generic Host Process for Win32 Services
Generic Host Process for Win 32 Services has encountered a problem and needs
to close. We are sorry to for the inconvenience.â??
â??Error: "The instruction at 0x7C918 fea" referenced memory at '0x00000010'.
The memory could not be 'written'. Click OK to terminate the program or Click
Cancel to debug the program.â??
I searched the knowledge base of your website. Could not fine solution.
No result matching my question. Please help me.
S.M.Habeeb Mohamed
Advocate.
--
S.M.Habeeb Mohamed
- 12
- Windows XP Security >> User Locked OutWindows XP Pro
Name1 has admin privileges.
---------------------------------------------------------------------------------
- Event Properties:
Logon Failure:
Reason: Account locked out
User Name: Name1
Domain: Name2
Logon Type: 2
Logon Process: User32
Authentication Package: Negotiate
Workstation Name: Name2
---------------------------------------------------------------------------------
-Name1 Properties:
Name1
Full name:
Description:
User must change password at next logon [GHOSTED]
User cannot change password
X Password never expires
Account is disabled
Account is locked out [GHOSTED]
---------------------------------------------------------------------------------
-NET USER NAME1 (command):
User name Name1
Full Name
Comment
User's comment
Country code 000 (System Default)
Account active Yes
Account expires Never
Password last set 10/26/2005 6:57 PM
Password expires Never
Password changeable 10/26/2005 6:57 PM
Password required Yes
User may change password Yes
Workstations allowed All
Logon script
User profile
Home directory
Last logon 10/21/2005 5:47 PM
Logon hours allowed All
Local Group Memberships *Administrators *Debugger Users
Global Group memberships *None
The command completed successfully.
---------------------------------------------------------------------------------
This is the info! The account's password was not set to expire, and
everything looks right, except that it does not appear in Control Panel/User
Accounts or the Welcome Screen, and the "Classic Logon" doesn't work.
What's the problem? What caused this? And most importantly HOW DO I FIX IT?
Now, do I have to reformat and reinstall windows almost every month? This
is so focking retarded!
---------------------------------------------------------------------------------
I don't expect compensation or attribution, but here are some features I
expect be included in the upcoming Windows Vista:
1. Incorporate the file system into the registry.
2. Include a fart sensor (to be incorporated in the seat by the user) with
the next Windows release, and have the output logged into the registry.
3. Make ALL files excutable.
4. Execute ALL files with rundll32.exe
5. Hide file extensions from the user. Wait, this is done already!
6. Rename all files as soon as they are installed to very long hex strings,
so as to hide from the user, among others, the biometric fart logs.
- 13
- 14
- 15
- Windows XP Setup >> task barI don't know what i did but the arrow where you hide icons
that are not used has gone and i can't get it back
I have hide inactive icons check and apply
Hope someone can help meget it back
Thanks
|
| Author |
Message |
Patrick
|
 Posted: Fri Jul 16 17:40:10 CDT 2004 |
Top |
Windows XP Hardware >> CDRW Burner & DVDRW Burner File Problem
I have a problem. I use to be able to drag and drop on to either burner now when it formats the disks it went to a UDF file system and makes my disks size way down. It wont even let me drag anything to the disk drives now. I have nero 6 software as well as roxio 6 and it doesn't make a difference. I want it to burn in the old format but I am dumb to this so bear with me. I am using XP.
Windows XP424
|
| |
|
| |
|
Rich
|
| Posted: Fri Jul 16 17:40:10 CDT 2004 |
Top |
Windows XP Hardware >> CDRW Burner & DVDRW Burner File Problem
Have you got all the updates for Roxio and Nero?
"Fugitive108" <EMail@HideDomain.com> wrote in message
news:EMail@HideDomain.com...
> I have a problem. I use to be able to drag and drop on to either burner
now when it formats the disks it went to a UDF file system and makes my
disks size way down. It wont even let me drag anything to the disk drives
now. I have nero 6 software as well as roxio 6 and it doesn't make a
difference. I want it to burn in the old format but I am dumb to this so
bear with me. I am using XP.
|
| |
|
| |
|
Nathan
|
| Posted: Sat Jul 17 00:56:43 CDT 2004 |
Top |
Windows XP Hardware >> CDRW Burner & DVDRW Burner File Problem
I would suggest reformatting the CD-RW with Nero. You formatted the
disk with DirectCD from Roxio to end up with UDF which Windows seems to
have problems with (in its native burning software).
Nathan McNulty
Rich Barry wrote:
> Have you got all the updates for Roxio and Nero?
> "Fugitive108" <EMail@HideDomain.com> wrote in message
> news:EMail@HideDomain.com...
>
>>I have a problem. I use to be able to drag and drop on to either burner
>
> now when it formats the disks it went to a UDF file system and makes my
> disks size way down. It wont even let me drag anything to the disk drives
> now. I have nero 6 software as well as roxio 6 and it doesn't make a
> difference. I want it to burn in the old format but I am dumb to this so
> bear with me. I am using XP.
>
>
|
| |
|
| |
|
| |
|
Index ‹ Windows XP ‹ Windows XP Hardware |
- Next
- 1
- Windows XP Support >> error messageat startup i rcv error msg white letters " predicts hard disk failure,
failure is imminent, back up system immediately, to continue press f-1".
computer runs fine though. running srvc pack 2 on windows home.
- 2
- Windows XP Network >> XP networkHi
Is there any command/utilities to know how many users connected (concurrent
connections) to an XP Pro. mechine
your help is appreciated
- 3
- Windows XP Setup >> lost dvd play and recordrecently I had to re-boot computer with recovery
disc.Since I did it I have lost all response from dvd
play and record. Help is needed to recover control or how
can I recover dvd section.? lost without it.please
advise.....thanks Gordon
- 4
- Windows XP Hardware >> problem to boot the harddisk from CD ROM/floopy diskMy computer cannot be booted from hard disk directly, and I doubt my
hard disk has some data corrupted?? However, I am able to see the
Windows XP splash screen but it never can go to Windows; it then
restarts by itself in an infinite loop. I think this problem was caused
after I failed to install the linux in different partition. I tried to
boot the machine from safe mode, but it still didn't help.
I tried to boot the machine from bootable Windows XP CD, and hopefully
I can repair or format the hard disk, but it didn't help at all. It
went to the setup page and stuck there forever. However, when I
switched to a good hard disk, it works fine. That means the machine is
able to boot from CD ROM if the hard disk is good, but not this hard
disk that has problem. I tried similar approach by using floopy disk to
boot the machine, and it works fine for a good hard disk but not this
bad one.
Any more suggestions?? I really have no idea what should I do now.
Please advice. thanks...
- 5
- Windows XP >> Do i still have a virus?I have scanned my computer with both online virus scans
as well as the norton antivirus i have installed on my
computer. However my computer still kept shuting down
after startup. I went to microsft and used the windows
update feature and that seemed to solve the problem about
windows shutting down.
To do this though I ended the process of WkCalRem.exe
which seemed to stop my computer from shutting down which
allowed me to download the updates. My question: Do I
still have a virus on my computer even though I don't see
the effects any more. Here is a log from XP Starup
Tracker:
-- Registry - HKEY_LOCAL_MACHINE RunOnce --
Compaq_RBA C:\Program
Files\COMPAQ\Compaq Advisor\bin\compaq-rba.exe -z
-- Registry - HKEY_LOCAL_MACHINE Run --
ccApp "C:\Program Files\Common
Files\Symantec Shared\ccApp.exe"
ccRegVfy "C:\Program Files\Common
Files\Symantec Shared\ccRegVfy.exe"
WT GameChannel C:\Program
Files\WildTangent\Apps\GameChannel.exe
WinStart001.EXE
C:\WINDOWS\System\WinStart001.EXE -b
WINDVDPatch CTHELPER.EXE
Windows Update
C:\windows\system\winupdate16.exe
WCOLOREAL "C:\Program
Files\COMPAQ\Coloreal\coloreal.exe"
UpdReg C:\WINDOWS\UpdReg.EXE
STOPzilla C:\Program Files\STOPzilla!
\Stopzilla.exe /autorun
srmclean C:\Cpqs\Scom\srmclean.exe
Spool 32 syscfg32.exe
SAHAgent C:\WINDOWS\System32
\SahAgent.exe
PROMon.exe PROMon.exe
nwiz nwiz.exe /install
NvCplDaemon RUNDLL32.EXE
C:\WINDOWS\System32\NvCpl.dll,NvStartup
NeroCheck C:\WINDOWS\system32
\NeroCheck.exe
Microsoft Works Update DetectiC:\Program Files\Microsoft
Works\WkDetect.exe
Microsoft Works Portfolio C:\Program Files\Microsoft
Works\WksSb.exe /AllUsers
LXSUPMON C:\WINDOWS\System32
\LXSUPMON.EXE RUN
KaZooM C:\Game
Files\kazaa\KaZooM.Exe
Jet Detection "C:\Program
Files\Creative\SBLive\PROGRAM\ADGJDet.exe"
InternalSystray c:\windows\system32
\kernel32.exe
gouprgl C:\DOCUME~1\Sheila\APPLIC~1
\wamdygqu.exe -QuieT
eDonkey2000 C:\Program Files\eDonkey2000
\eDonkey2000.exe -t
DietK C:\PROGRA~1\DIETKA~1
\DietKaza.exe
Diet K C:\Program Files\Diet
Kaza\DietKaza.exe
CPQEASYACC C:\Program
Files\COMPAQ\Easy Access Button Support\StartEAK.exe
CARPService carpserv.exe
BJCFD C:\Program
Files\BroadJump\Client Foundation\CFD.exe
ATTBroadbandUpdate C:\Program
Files\AT&T\BBClient\Programs\SAUpdate.exe
ATTBroadbandClient C:\Program
Files\AT&T\BBClient\Programs\RegCon.exe /admincheck
AdaptecDirectCD "C:\Program
Files\Roxio\Easy CD Creator 5\DirectCD\DirectCD.exe"
Ad-watch C:\Program
Files\Lavasoft\Ad-aware 6\Ad-watch.exe
QuickTime Task "C:\Program
Files\QuickTime\qttask.exe" -atboottime
TkBellExe "C:\Program Files\Common
Files\Real\Update_OB\realsched.exe" -osboot
SafeSurfingUpdate C:\Program
Files\SafeSurfing\SSUpdate.exe
ezShieldProtector for Px C:\WINDOWS\System32
\ezSP_Px.exe
-- Registry - HKEY_CURRENT_USER RunOnce --
No Items Found
-- Registry - HKEY_CURRENT_USER Run --
Start WingMan Profiler
Excalibur C:\Program
Files\EarthStation5\ES5.exe show=minimize
AutoUpdater C:\WINDOWS\System32
\aupdate.exe
-- Registry - HKEY_USERS\.DEFAULT Run --
No Items Found
-- Start Menu - Current User --
HotSync Manager.lnk
PowerReg Scheduler.exe
PowerReg SchedulerV2.exe
Update Grokster.lnk
-- Start Menu - All Users --
Date Manager.lnk
GoBack.lnk
Microsoft Office.lnk
Microsoft Works Calendar Reminders.lnk
PrecisionTime.lnk
-- Disabled Items --
No Items Found
-- Registry - Shell Value -
HKLM\SOFTWARE\Microsoft\Windows
NT\CurrentVersion\Winlogon --
Explorer.exe
-- Running Processes --
System Idle Process
System
smss.exe \SystemRoot\System32\smss.exe
csrss.exe
winlogon.exe winlogon.exe
services.exe C:\WINDOWS\system32\services.exe
lsass.exe C:\WINDOWS\system32\lsass.exe
svchost.exe C:\WINDOWS\system32\svchost -k rpcss
svchost.exe C:\WINDOWS\System32\svchost.exe -k
netsvcs
svchost.exe
svchost.exe
LEXBCES.EXE C:\WINDOWS\system32\LEXBCES.EXE
spoolsv.exe C:\WINDOWS\system32\spoolsv.exe
LEXPPS.EXE LEXPPS.EXE
CCEVTMGR.EXE "C:\Program Files\Common
Files\Symantec Shared\ccEvtMgr.exe"
CCAPP.EXE "C:\Program Files\Common
Files\Symantec Shared\ccApp.exe"
CTHELPER.EXE "C:\WINDOWS\System32\CTHELPER.EXE"
SahAgent.exe "C:\WINDOWS\System32\SahAgent.exe"
PROMon.exe "C:\WINDOWS\System32\PROMon.exe"
LXSUPMON.EXE "C:\WINDOWS\System32\LXSUPMON.EXE" RUN
carpserv.exe "C:\WINDOWS\System32\carpserv.exe"
CFD.exe "C:\Program Files\BroadJump\Client
Foundation\CFD.exe"
Directcd.exe "C:\Program Files\Roxio\Easy CD
Creator 5\DirectCD\DirectCD.exe"
qttask.exe "C:\Program
Files\QuickTime\qttask.exe" -atboottime
realsched.exe "C:\Program Files\Common
Files\Real\Update_OB\realsched.exe" -osboot
ezSP_Px.exe "C:\WINDOWS\System32\ezSP_Px.exe"
CpqEAKSystemTray.exe"C:\Program Files\Compaq\Easy Access
Button Support\CPQEAKSYSTEMTRAY.EXE"
CPQEADM.exe "C:\Program Files\Compaq\Easy Access
Button Support\CPQEADM.EXE"
EAUSBKBD.exe "C:\Compaq\EAKDRV\EAUSBKBD.EXE"
BttnServ.exe C:\PROGRA~1\Compaq\EASYAC~1
\BttnServ.exe -Embedding
WkCalRem.exe "C:\Program Files\Common
Files\Microsoft Shared\Works Shared\wkcalrem.exe"
hotsync.exe "C:\Program Files\Palm\hotsync.exe"
PackethSvc.exe C:\WINDOWS\System32\PackethSvc.exe
alg.exe
compaq-rba.exe "C:\Program Files\COMPAQ\Compaq
Advisor\bin\compaq-rba.exe"
CTsvcCDA.EXE C:\WINDOWS\System32\CTsvcCDA.exe
upssrv.exe C:\PowerPanelPlus\upssrv.exe
GBPoll.exe "C:\Program
Files\Roxio\GoBack\GBPoll.exe"
NAVAPSVC.EXE "C:\Program Files\Norton
SystemWorks\Norton AntiVirus\navapsvc.exe"
NMSSvc.Exe C:\WINDOWS\System32\NMSSvc.exe
nvsvc32.exe C:\WINDOWS\System32\nvsvc32.exe
MsPMSPSv.exe C:\WINDOWS\System32\MsPMSPSv.exe
eMule.exe "C:\Program
Files\eMulePlus\eMule.exe"
explorer.exe C:\WINDOWS\explorer.exe
iexplore.exe "C:\Program Files\Internet
Explorer\IEXPLORE.EXE"
Ad-aware.exe "C:\Program Files\Lavasoft\Ad-aware 6
\Ad-aware.exe"
StartupTracker3.exe "C:\Documents and
Settings\Sheila\Local Settings\Temp\StartupTracker3.exe"
wmiprvse.exe
I have spaced out the WkCalRem.exe so it's easier to
find. My computer doesn't shutdown after startup anymore
(thank god) but I just want to make sure my system is
clean.
Thanks for your time
H.
- 6
- Windows XP >> Cannot login using new accountsCannot login using new accounts
I am encountering logon problems when using new created profiles....some old
profiles work well.
problem: "The local policy of this system does not permit you to logon
interactively"
scenario:
logins created on win 2003 server
logging from an xp client connected to server
any ideas?
tnx
- 7
- Windows XP Support >> Windows Explorer problemI saw an article about how to enable opening a DOS-window from within Windows
Explorer using the current folder in Windows Explorer. However, I did one
mistake and now I don't know how to make it undone.
I went in to Tools->Folder Options...->File types tab in Windows Explorer
and then i highlighted File Folder and pushed the Advanced button. Then I
pushed the New... button and then added "Open folder in MS-DOS" and
"c:\windows\system32\cmd.exe /k %1". Then I pressed OKk and did the mistake
to press the Standard button followed by OK. Now Windows Explorer opens a new
Search dialog (windows standard search dialog for files and folders) when
double clicking a folder in the right view of Windows Explorer. Also, when I
in the Search view right click an item, which has been found after a search,
and select Open Object's Folder I get another Search dialog. The worst thing
is that when I go back to Tools->Folder Options...->File types tab in Windows
Explorer and then i highlight File Folder and push the Advanced button the
Edit and Remove options are disabled so I cannot delete or edit what I have
just added. How can I solve this problem?
- 8
- Windows XP Setup >> Sysprep difficultiesGood afternoon,
I am currently having difficulties usng Sysprep. Each
time I create an image using sysprep -reseal -mini, I am
required to enter the product key, which should not be a
problem. However, two issues arise from this: first, I
have already included the key in the sysprep.inf file.
Secondly, the product key is not accepted, although I
know perfectly well that the key I am entering is valid.
Has anyone encountered problems similar to this before?
Thank you for your time.
- 9
- Windows XP Security >> System utility problems after SP1 patch installedThe SP1 service installation procedure seems to have
caused both the backup and checkdisk Windows systems
utilities to totally lock up the computer after
installation, to the extent I can't even power off. I
installed the updates in October, 2002 and had this
problem, then used the "System Restore" feature to get
back to where I was. I waited 6 months to try again, but
the same problem occurs now. Everything seems to be
working well. Suggestions? I am up to date on critical
updates based on the Windows XP support site.
- 10
- customize >> remove microsoft...document from right click > new menui was searching on google and found this article
http://groups.google.com.bo/group/microsoft.public.windowsxp.customize/browse_thread/thread/2ba01bc8c30b76a9/3e08ed9e84985ffc
I have the opposite problem. i want to remove microsoft
word/excel/powerpoint document from the new menu. i am able to disable/
enable any template except these three. if i disable them and click
apply (in powertoys tweakui), the check marks blink and comeback on. if
i delete them, they are appearing again back in 2 seconds. how can i
remove them?
- 11
- Windows XP Support >> Machine checkDuring XP startup sequence, I see in the Event Log, a number (~6) of
Machine Check records, ID26. The associated explanation says "unable to load
driver, missing or corrupt, etc". XP always runs up Ok in the end and
operates normally.
Is it possible to determine which specific driver is causing the problem?
In a boot log, I also note a cluster of "unable to load driver" entries
early in the sequence; this cluster, or parts of, being repeated again and
again. Eventually the boot completes.
The first entry always refers to "acpi drivers", so does this infer the
reason for the subsequent failures?
- 12
- Windows XP >> file deletion through windows installerHi
I am having a doubt regarding windows installer. Whenever windows
installer is used for uninstallation of any software, then the file
deleted through MSIexec.exe doesn't use NtDeletefile for deleting
files.i have verfied using windows debugger. My overall purpose is to
get notified whenever any software is getting installed/un installed.
How can i proceed to achieve the same.
Regards
Rohit
- 13
- 14
- Windows XP Network >> wireless networkingMy family is using a lynksis wireless network. Me and
another member have laptops and it is impossible for use
to create a conection to the network is ther any way to
do this
thanks
- 15
- Windows XP Hardware >> CD-ROM drivesI recently upgraded my Windows 98 to Windows XP because
something inside my Windows 98 crashed, and caused the
whole thing to go haywire. I installed Windows XP, and
everything works like normal. Except my second cd-rom
drive, which is an Acer CD-RW 20x10x40, apparently isn't
even in my computer. I open my computer and it only has
one cd drive in it, which is my DVD-ROM drive. My second
cd drive still lights up and opens and closes as if its
perfectly fine and working, although my computer wont
detect it. I've gone through the Add new hardware program
under control panel and gotten nowhere. This cd drive
didnt come with an installation disk either, so I'm lost
what to do. How do i get my computer to detect a second
cd drive?
|
|
|