| Internet Explorer Script Error |
|
 |
Index ‹ Windows XP ‹ Windows XP
|
- Previous
- 1
- customize >> Saving a customized printer settingI have setup a customized setting for ClickBook. Instead of me having to
go through the whole process of setting it up again (if I reinstall
Windows) and wasting paper and ink, is there a way that I can save the
"printer" shown under Printers and Faxes?
Cheers
- 2
- Windows XP Support >> user rights?Can someone please explain to me why "all users in xp home ed. have admin
rights" when the Limited account clearly doesn't have admin rights. I'm
reading this on various websites but don't understand what they mean.
- 3
- 4
- Windows XP >> system restoremy pc just crashed - cannot restart unless in safe mode - system restore has
been turned off somehow and cannot be turned on while in safe mode.
Can I reset remotely using my laptop?
- 5
- 6
- Windows XP Hardware >> What Scanner works with Windows XP?I got a scanner from a friend and it doesn't work with my
program? It is a One-Touch 8100, what is the problem and
what scanner will work with my PC? Please let me know I
would like to use it. I would get message Please unlock
scanner and it was. Then the message would say "Twain
Device is not compatable" what is up?
- 7
- Windows XP Hardware >> Two cd drives will not work on one machineHi there,
I am helping a pal to install a second cd drive to his Pentium P4 running XP
Home.
No matter what we do, we can only get one of the two cd drives to work at
one time.... we have tried various slave/master jumper settings, tried
having one of the drives on the primary IDE slaved to the HDD... And of
course tried both drives on the Secondary cable... one slave, one master....
The facts are :
1/ The drive that works (and can be seen by Windows) is always the slave
device on the secondary cable. In fact, even if only one drive is installed,
it has to be set to slave for it to be accessible. No other position in the
IDE setup will work for either/any CD drive.
2/ At bootup time, if two drives are installed a PXE message appears saying
""PXE-E61: Media Test Failure ... check the cable. And also "PXE-MOF -
existing PXE ROM". It also seems to give a sort of prompt (for a CD boot
device ?) It just says : "CD: "
If only one drive installed as slave, no messages appear.
3/ Either of the drives (the CD/R or the CD/RW) will work in the computer if
it is setup as per 1) above, as a slave on the secondary IDE.
4/ I have checked the BIOS & can confirm that none of the boot devices are
set as CD devices (in case message in 2) above relates to this).
5/ In device manager, no errors appear against the IDE or CD devices...
second drive doesn't appear though of course.
6/ During early boot process, both CD devices are auto defined correctly to
BIOS... ie. as master and slave on secondary cable.
7) One of the drives is a CD/R, the other CD/RW
Any hints ??
Thanks,
Bruce
- 8
- Windows XP Network >> Adding 3rd Computer to NetworkI have an XP SP2 machine connected directly to a linksys router via a wired
connection. I also have an XP SP2 machine connected to same router with a
built-in wireless card. These two machines work great. I can see each other
and shre files and print. Functions normally. I have added a third XP SP2
machine with a usb wireless adapter. I ran the network setup wizzard, unique
name, workgroup name identical. I can see the this new machine from the
existing wireless connection. I can ping this machine. THis machine can
ping the wireless machine.
However, when I try to view the workgroup computers from the new machine, I
get the error message "you do no have permission to access". When i double
click on the new machine from the existing wireless machine, i get the same
error message.
Can someone please help me to resolve this issue?
Thanks in advance,
Jape_Ringgold
- 9
- Windows XP Support >> Data TravelerI recently purchased a new computer for my work. I finished installing
everything and used my 1GB (Kingston) data traveler to transfer files from my
old computer to my new one.
Now that I have entered a password on my computer it seems that I can't used
my data traveler any more as it says that the administrator denies me access
to it. I'm the administrator of this computer, so why can't I access the data
on my data traveler? Help please.
Ludo
- 10
- Windows XP Hardware >> CD-ROM drive "inaccessible"This message appeared unexpectedly:
"D:/is not accessible, Incorrect function."
This is the CD-ROM drive.
No disk can be read in Windows Home XP. I have removed
the drive and rebooted and the drive was recognized and
Windows reinstalled the drivers and the message persists.
I can boot to the D:/ drive and a diagnostics CD is read
but the drive does not read in Windows.
Can someone tell me what to do?
- 11
- Windows XP MovieMaker >> CAN'T RETRIEVE MOVIE. NEED TODAY!!Oh my gosh, I only got like 4 hours sleep last night staying up to get all
but the music part of my mission trip video done and everytime I click to
pull it open today, it doesn't even attempt to do it. The little project box
meter isn't even popping up. It is 1hr.15min. long and I have 3 days worth of
work into it. I need to add music today because it is being presented
tomorrow. We have a brand new computer and it has a 2 GB SD667MHz memory and
320 GB hard drive.
WHAT CAN I DO TO RETRIEVE MY FILE?
ANY and ALL help will be GREATLY APPRECIATED!!!
- 12
- 13
- 14
- Windows XP Security >> Do you have a answerI can't set my permissions each and every time I do they
go wirte back to the orignal settings READ ONLY no matter
what I do they stay the same.I was messing around in the
admin scripts in one of the IIS folders and I think I may
have click on one of the scripts (BATCH FILES) which one
I do not know. Does antone have any ideas on how to
handel this bug. There was also a hidden file that was in
the inetoub folder that will not delete.I tried every
thing.
DBarselow
- 15
- Windows XP Network >> Home nework XP to 2000Im trying to network an XP toshiba laptop to a windows
2000 desktop via a crossover cable and 2 lan cards.
XP wants to make a network setup disk, which doesnt work
on the 2000 machine.
I want the network to share files, play LAN games and
share DSL internet connection. (DSL via either machine,
pref 2000)
Any ideas? All help much apprieciated!
Thanks in advance
|
| Author |
Message |
tdmoon
|
 Posted: Sat Aug 02 20:28:28 CDT 2003 |
Top |
Windows XP >> Internet Explorer Script Error
I use a dial up connection. When different sites are
loading I get this pop up window stating there is an
error running script on a certain line and shows some
other info about the error and asks do you want to
continue to run scripts on this page - yes or no. What
can I do to stop this pop up.
Thanks,
Terry
Windows XP1164
|
| |
|
| |
|
S
|
| Posted: Sat Aug 02 20:28:28 CDT 2003 |
Top |
Windows XP >> Internet Explorer Script Error
>-----Original Message-----
>I use a dial up connection. When different sites are
>loading I get this pop up window stating there is an
>error running script on a certain line and shows some
>other info about the error and asks do you want to
>continue to run scripts on this page - yes or no. What
>can I do to stop this pop up.
> Thanks,
> Terry
>Hello!
http://support.microsoft.com/?kbid=285212 read this.
Is your XP bundled with service pack?If not install it.
With regards,
ssg
pronetworks.org
|
| |
|
| |
|
Kelly
|
| Posted: Sat Aug 02 21:19:21 CDT 2003 |
Top |
|
| |
|
| |
|
Index ‹ Windows XP ‹ Windows XP |
- Next
- 1
- Windows XP Update >> 80070017I attempt to run the update, but download never starts, fails, and gives this
failure code: 80070017. can anyone help???
- 2
- Windows XP >> shadows on screenA couple of minutes after I log on, I get these shadows
or ghosts on my screen like when you have a TV with no
cable and you get bad reception. When I pull up the
monitor's control panel, that screen is fine so I guess
it's a Windows problem. ANy thoughts?
- 3
- Windows XP >> Files and Settings Transfer WizardI have fitted a Serial ATA drive with a new copy of XP installed onto it
into my PC.
Prior to this I used the Files and Settings Transfer Wizard on my old drive
to backup my data etc.
After getting the new SATA drive working I used Files and Settings Transfer
Wizard again to finish off the install.
All of the files transferred but the settings did not. After the Wizard
ended I still only had my original log in on the new drive, the other users
had not been created.
Anyone seen this and know where I went wrong ?
Thanks
- 4
- Windows XP Network >> Valid absolute Path NameHi;
I am trying to set up a "guest" account so people can access a specific
drive from the net. But when I try to set-up a default file for there
account properties I recieve a error message which says create a "Valid
absolute Path name" I am using \\computername\Drive:\file name. Any help
wopuld be greatly appreciated.
-
Thank you for you help
Mark M
- 5
- Windows XP Support >> Sounds and Audio Device ProblemsOk the other day this was working fine. I haven't done anything to the
sound card/drives/windows stuff ect. well i noticed my sound icon wasnt
in my task bar so i went to go put it in their. When i go to click on it
says:
Error: WIndows cannot display the volume control on the taskbar because
the Volume Control program has not been installed. To install it, use
Add/Remove Programs in Control Panel.
I have looked in the add/remove programs and i dont know about anything
in there. Then i also went to the windows programs in the add/remove
programs and i couldn't find anything on sound devices or anything of
that sort. I have had it do this to me before but i dont remember what
i did. If anyone can point me in the right directin that would be
great.
I have a VIA AC'97 built in card . Its 6.1 sourround. I also have a SB
Live! that i use for input only becuase the mic on the onboard hasnt
really worked in a long time. But everything has been fine till the
other day
--
Tweak
- 6
- Windows XP Basic >> error messageHi, when i try to install ALCOHOL 120 i get
"The system administrator has set policies to prevent this installation".
What can i do to fix this?
Thanks
- 7
- Windows XP >> Who is using my MODEMI would like to know what programs are using my modem. Does win xp have a
way to log
this activity or is there any free software available for this use.
Thanks
Tom
- 8
- Windows XP Support >> Curious Connectivity ProblemWinXP Home, IE6
My wife's computer was set up with two user accounts, one for each of us.
I rarely use my account. Today, I tried using it and discovered a curious
situation while accessing web sites with IE6.
If I use IE6 on her account, everything behaves normally.
But when I access the same sites from my user account, I get frequent
"failure to connect "error 12029" errors. The log from the connectivity
tool seems to show that while HTTPS sites load normally, HTTP accounts don't
connect.
Obviously both her account and mine share the identical DSL wired
connection.
Suggestions welcome.
_____
PT
- 9
- Windows XP Support >> STOP:0x0000007E after installing RAM upgradeAny help appreciated please! I've searched but cannot find a specific answer.
I replaced the RAM with 2 new (good, tested) 512MB PC133 SD RAM modules on
my generic PC, DFI AM75-TC mobo, AMD AthlonXP 2600+ CPU running XP Pro SP2
which was running perfectly, until I upgraded the RAM from 256MB to 1GB.
After RAM replacement, I received Blue Screen STOP error on boot up
STOP:0x0000007E (0xC0000005, 0xF67FA52E, 0xF7966C60, 0xF796695C)
Attempting to start in safe mode results in machine hanging at
multi(0)disk(0)rdisk(0)partition91)\WINDOWS\System32\Drivers\Mup.sys
Thanks
- 10
- Windows XP >> Windows cannot find System32.exe on start upHello,
This is not a huge problem but I was wondering if anyone
can tell me how to fix it before I try it myself...
When my computer starts up I get a message that says:
Windows cannot find 'C:\Windows\system32\system32.exe'
Make sure you typed the name correctly and try again. To
search for the file click the start button and click
search.
I just close the popup and everything SEEMS fine.
Any Ideas? Thanks a bunch!
Heidi
- 11
- Windows XP Basic >> Start Button movedRunning Win XP Home. My Start button has moved to the top right.
I have unlocked the Task Bar but when I try to drag the Start button, when I
click on it, my list of programs comes up. Thanks
--
Roger
- 12
- Windows XP Support >> Lost software in KatrinaHi,
My sister lost her software in Katrina. She registered and activated it. She
is disabled and does not have the income to replace the disks. I was
wondering if you can tell me who I can talk to about getting windowsxp,
office, money and there is another one she used for making greeting cards
but I do not know the exact name. Can some one direct me?
Thank You,
--
Deb
- 13
- Windows XP >> Help needed with wireless accessI have a Sony Vaio laptop with Windows XP Pro SP2. We got a D-Link
DIR-655 wireless router and gigabit switch to use for wireless
connections.
When I configure the wireless settings using WPA-PSK /TKIP I can see
the SSID broadcast but I cannot connect. When I try, I see a balloon
popup in the tray that says it's validating the connection. Then I get
an error that no certificate could be found. I have NO IDEA why it's
looking for a certificate.
On another laptop (a HP) ALSO with Windows XP pro sp2, I configure the
wireless the same way (using Windows to manage the wireless
connection, just like with the Sony) and the HP connects fine.
What can I check on the Sony laptop that would help to resolve this
problem?
-JS-
- 14
- Windows XP Support >> Delete filesI have done a scan disk. When it asks me if I wanrt to delete the files I say
yes. It goes throught the motions but nothing gets deleted. Help
- 15
- Windows XP Security >> Policies on XP in NT4.0 domainI am new to XP policies and need to set up a policy on XP
workstations that are on a domain using NT4 as domain
controllers. A local policy on each XP would be OK. I
would like the policy to apply to just certain users on
the workstation and not to all users. Basically, I need
to disallow changing IE proxy for certain user groups. Is
this possible and where do I find instructions on
accomplishing this. Any recommended books, etc.
Thanks,
AJ
|
|
|