 |
|
Index ‹ Windows XP ‹ Windows XP Perform Maintain
|
- Previous
- 1
- Windows XP MovieMaker >> Major Capture ERRORWhen i try to "capture from video device" i get a statment saying my camera
may not be on or working properly. I hear the chime every time i turn the
camera on or replug my usb but when i try to click 'capture from device' it
will not let me... I even paid $5 for a driver onlne for my specific camera
but no results. ANy help will be GREATLY appreaciated!!!!!
- 2
- Windows XP Setup >> Windows NT4.0 to W2k3 Migration (Non-Active Directory)I currently have two NT4.0 servers (PDC/BDC) in a Domain setting. We have
ordered new hardware and would like to upgrade the user accounts (SAM
database) and some data across to the new hardware. When all is said and
done, we would like to the new hardware to be a mirror of the old hardware
(i.e.: I.P. addresses, computer names, data -- less some of the current
applications. Upgraded versions to existing applications will be installed
separately). A few questions come to mind that you may be able to assist me
with answering/resolving:
1. What is the most efficient way to accomplish this?
2. Would this have to be performed in an offline setting and would the
ADMT2.0 work although I do not want to configure AD.
3. In order to to configure the new hardware in a Domain environment, would
I have to run AD?
Thanks very much for your response.
--
Chuck Durley
Network Analyst
- 3
- Windows XP >> Can't run restore, inssufficient rights as administratorI have tried to run the restore program and got a meesage insufficient rights
to perform this action both as a user with administrator rights and as
administrator. Why is that?
This question stems from not being able to install the new windows update
program I get the error 0x800703e3, both from microsoft updates website and
"windows update agent installer"
- 4
- 5
- 6
- 7
- Windows XP Hardware >> new 160GB hard drive, but limited to 137GB!!here is my problem. I bought and installed a Maxtor 160GB ATA hard drive into
my computer. I used the install disk (Max Blast3, which came along w/ the
drive) to install the HD. During the installation, a message came out and
said that my pc doesn't support Hard Drive that's larger than 137GB. I went
through the installation guide and found out there is two solutions. One is
Ultra ATA/133-compatible PCI card, the other solution is to install
Microsoft SP1. I had it installed and how come it's not working? after the
installation, the hard drive is limited to 137MB, even worse, it dropped to
127GB after i formatted it. It's a totally 33 GB lost!!! I am sure my pc is
capable for 160GB HD, can anyone help me?
- 8
- Windows XP Setup >> corrupt installer?My installation of Norton programs (Antivirus 2003 pro &
Ghost 2003) somehow got buggered and I believe the
Windows Installer msi files are to blame. No matter what
I attempt, I cannot re-install these applications. In the
Event Viewer, I have a number of EventIDs 7034, "The
Windows Installer service terminated unexpectedly..." I
can uninstall and re-install other applications without
problem, it just seems to be NAV and Ghost. I have
scanned for viruses using Symantec's on-line scanning
ActiveX tool, but none were found. Any ideas how to fix
this such that I can get a fully-functioning NAV and
Ghost again?
Thanks, Dave.
- 9
- 10
- Windows XP Security >> PasswordI changed from going into a domain to a workgroup and now
I cannot log into my workstation. Has anyone run into this
problem? Does anyone know a work around?
Charlie
- 11
- Windows XP Network >> ICS DNSI'm running ICS on XP SP2. Everything seems to be working except DNS on the
internal interface. No DNS queries are able to be requested on the
interface. I did an nslookup on a client and this is what I get.
>
Default Server: [192.168.0.1}
Address: 192.168.0.1
>www.cnn.com
DNS request timed out
timeout was 2 seconds.
DNS request timed out
timeout was 2 seconds
*** Request to [192.168.0.1] time-out
I've verfied that DNS works on the box running ICS and if I manually change
the DNS to use an outside server on the client everything works. I even
tried installing a third party DNS server on the box and it said that DNS was
already running on port 53. For testing I disabled the firewall and that
didn't solve the problem either.
- 12
- Windows XP Network >> weird IE 7 connection problemEverything else works fine - FireFox, Outlook , all kinds of programs that
need an internet connection (updates etc.) but IE says page can not be
displayed - like there is some kind of DNS problem.... but :
I have changed everything back to default settings in IE plus reinstalled it
and no luck.
Can someone help me with that issue ?
amd belive me i am not a nubie - so i know its a weird thing.... plus.... i
did all that (fixing and checking ) with no firewall and no security.... so
there is no blocking connection.
Thanks !
--
Matthew Protasewicz
Technician at Scorpion Computers - Philadelphia
Visit our website at HTTP://WWW.4EYESPC.COM
Phone number: 215.888.30.77
e-mails:
tech@4eyespc.com
matthew@4eyespc.com
------------ WWW.4EYESPC.COM --------------
- 13
- Windows XP >> Right-Click on Desktop leads to no goodI've got XP Pro on a Dell Pentium 2.4 with 768MB of RAM. System seemed to be
working fine last night. Tonight it behaves OK, unless I right-click on the
Desktop. I get an hourglass that stays forever. I can click something
else--folder, Start, etc--and that will open, but nothing inside that reacts
to the mouse. The mouse is not hung, but shows the hourglass over the
desktop. If I logoff and back on, it "unhangs" until I do the right-click. I
did a system
restore from night before last, but that doesn't cure it. It seems to be OK
in Safe Mode. Unless the virus detector updated itself, there should have
been no difference between the system the two nights.
Anybody got any ideas?
Ken
- 14
- Windows XP Network >> Not being able to set up workstation on NetworkHi, I'm trying to connect a new workstation to a very small network (3
computers) The computers are linked via Ethernet and all of them are sharing
Windows XP.
The new workstation is also using Windows XP. When I setup the computer, I
made it a member of the group, by choosing that on the workstation and I
gave the computer a unique name.
I can connect to the Internet via this network, but when I try to see any of
the other computers, it doesn't even show them and I get an error message
stating that I'm not allowed on that workgroup, i.e. it is not accessable
and to see the network administrator (which I me.) I tried in the looking in
the mirror, but that didn't seem to help much! :-)
I feel like I'm missing something fundamentally. It is a peer to peer
network, i.e. no server and what could be the problem?
Would anyone please help me?
Thanks!
Kees
- 15
- Windows XP >> windows explorer(XP)This is a multi-part message in MIME format.
------=_NextPart_000_009B_01C3AED5.18697F60
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
this disappeared i month ago. tried to recover it but can't and don't =
want to go back 1 mo. in system restore. Can I do this from my XP CD? =
Help
------=_NextPart_000_009B_01C3AED5.18697F60
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1276" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>this disappeared i month ago. tried to =
recover it=20
but can't and don't want to go back 1 mo. in system restore. Can I =
do this=20
from my XP CD? Help</FONT></DIV></BODY></HTML>
------=_NextPart_000_009B_01C3AED5.18697F60--
|
| Author |
Message |
ccowboyearl01
|
 Posted: Tue Aug 24 19:33:09 CDT 2004 |
Top |
Windows XP Perform Maintain >> System Restore tab dead
I get this message,,,, An Exception Occurred while trying
to run "shell32.dll, control_Rundll" C:\windows\system32
\sysdm.cpl", system".
This is a new install
any help with this would be great
thanks wayne
Windows XP149
|
| |
|
| |
|
MAP
|
| Posted: Tue Aug 24 19:33:09 CDT 2004 |
Top |
Windows XP Perform Maintain >> System Restore tab dead
"Wayne" wrote:
> I get this message,,,, An Exception Occurred while trying
> to run "shell32.dll, control_Rundll" C:\windows\system32
> \sysdm.cpl", system".
>
> This is a new install
> any help with this would be great
> thanks wayne
>
Restore system restore,line 278 left side.
http://www.kellys-korner-xp.com/xp_tweaks.htm
|
| |
|
| |
|
anonymous
|
| Posted: Sun Aug 29 18:30:40 CDT 2004 |
Top |
|
| |
|
| |
|
Index ‹ Windows XP ‹ Windows XP Perform Maintain |
- Next
- 1
- Windows XP Security >> msconfig/regedit not respondingHi,
I've done several online virus scans, scanned using
Freedom Antivirus and AVG and found nothing. I've cleaned
spyware out using spybot and adaware. Nothing.
I try to bring the system utility configuration tool up
and it comes up for 2 seconds then disappears as does
regedit. What's up with that?
Please help. Thanks.
- 2
- Windows XP >> Attachment display window organizationWhen i use any web-based app and select to attach a document, the resulting
window would feature a My Documents button, and upon clicking My Documents,
would list the folders in it alphabetically.
For no known reason, it's sunddenly began displaying those folders in a
seemingly random order. I'm not sure why, but after months of navigating
alphabetically, this is much more time consuming.
Can you tell me how I can reset this so that when i'm attaching docs, it
displays folder and file names alphabetically?
thanks.
- 3
- Windows XP >> java machine error on bootupi just install the latest version of java from
sun....'java 2 runtime environment ver 1.4.2_03....now on
bootup it is giving me the following error 'java virtual
machine launcher....could not find main class program
will exit'......i also tried to uninstall it a couple of
times but the same....any suggestions besides
uninstalling it...
thxs
- 4
- Windows XP Perform Maintain >> Outlook ExpressI am taking online classes and most of my assignments has to be sent by
Outlook Express. I recently installed a Microsoft Office 97 software on my
computer and it ended up being the wrong program I needed, so I uninstalled
it.............since then Outlook won't work. In MS Works I try and send a
document and nothing happens when I press send. NOTHING AT ALL!! I NEED
SOME HELP AND FAST!!
--
thank you greatly tlove
- 5
- Windows XP >> Disk cleanupI've run across something on an XP machine that's odd.
If you run disk cleanup it shows 4600 k of
webclient/publisher temporary files as one of the items
on the list. If you tell it to remove everything it acts
like it does, but then if you go right back to disk
cleanup it still shows exactly 4600 k. What's up with
that?
- 6
- Windows XP Network >> xp prof internet connection probleI just installed window xp prof. and a Linksys 10/100 pci adaptor nic. My ISP is able to see the cable modem but not my computer. When xp trys to renew the IP address I get an error message. The ISP and modem software tell me to check the cable connection between the modem and the cpu. I have tried all of the suggestions of disconnecting power and rebooting, reinstalling the nic driver, and at the cmd prompt ipconfig /renew. They even had me try moving the nic to another port. All of the technical support personel have eliminated problems with their hardware. I have no idea of what to try next. Any suggestions?
Thanks,
Jeff
- 7
- Windows XP Hardware >> Drive ImagingWhat drive imaging software do you guys and gals use for your system
partitions?
I'm familiar with DriveImage and Ghost, and I'm wondering if there's
something else basic and cheap, that doesn't require me to know anything
about Linux.
-John O
- 8
- 9
- 10
- Windows XP MovieMaker >> AudioOk, now that I have a new PC with WindowsXP2, I decided to try out the
Moviemaker program. I know people are using it so I thought it would be a
simple thing to put some video clips and music together.
I got the video added, and the music on the Audio track,added Titles
,trimmed it to fade at the end and saved the file and had it copied to my
video folder.
When it played back with WMP there was video edited like I wanted but no
audio from the music I had on the preview!
How can I save music/audio for the new slideshow to replace the original
audio I dont want on the clips?
Thanks for any help
Sprockets
- 11
- Windows XP Security >> message at ie6 closeHello, I've never used this system before so don't know
if this is the right place to post this inquiry.
For some time now whenever I close an IE6 session the
following message pops up: The instruction
at "0x01e33748" referenced memory at "0x01e33748". The
memory could not be "read". Click on ok to terminate the
program.
I click on ok and the IE6 session ends and that's that.
However I still don't know why I am getting this message.
Also, frequently during a session a message comes up
saying a problem has occurred and the program must be
terminated (this gives me the option of sending Microsoft
a report, which I often do.
Does anyone know what this might be all about? Thanks.
- 12
- Windows XP >> Download JavaWhile trying to get online support from AOL, they
prompted me to download Java Virtual Machine. It
transferred me to Microsoft. I have a new computer and
icons for Java Plug in 1.3.1-02 and Java Plug-in 1.3.1.
Nothing seems to work. Please help.
- 13
- Windows XP >> Ghost 2003 and Windows XPI'm not sure what I did wrong here, but I'm in a bit of a bind.
I installed Norton Ghost. I went through the normal wizard and it
finally asked me to reboot. I did so, and it rebooted into PCdos.
When it tried to run ghost, the screen came up but stayed in the blue
screen, doing nothing.
Eventually, I gave up and decided to return to windows. Now I can't
seem to get back to my normal setup.
Unfortunately, the pcdos was done on the hard drive. How can I get
back to Windows XP? I'm using XP Pro fully patched.
- 14
- Windows XP Network >> VPN error troubleshooting requestI'm see the following list of errors in my logs when I attempt to
connect to my configured VPN connection:
UCLA VPN Client Version 4.6.00.0045
Copyright (C) 1998-2004 Cisco Systems, Inc. All Rights Reserved.
Client Type(s): Windows, WinNT
Running on: 5.1.2600 Service Pack 2
Config file directory: C:\Program Files\Cisco Systems\VPN Client
1 07:49:59.515 07/02/05 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of
0x00000002(DRVIFACE:725)
2 07:50:00.015 07/02/05 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of
0x00000002(DRVIFACE:725)
3 07:50:00.750 07/02/05 Sev=Warning/2 CVPND/0xE3400003
Function QueryServiceStatus failed with an error code of
0x00000006(DRVIFACE:778)
4 07:50:03.750 07/02/05 Sev=Warning/2 CVPND/0xE3400003
Function QueryServiceStatus failed with an error code of
0x00000006(DRVIFACE:778)
5 07:50:06.750 07/02/05 Sev=Warning/2 CVPND/0xE3400003
Function QueryServiceStatus failed with an error code of
0x00000006(DRVIFACE:778)
6 07:50:09.750 07/02/05 Sev=Warning/2 CVPND/0xE3400003
Function QueryServiceStatus failed with an error code of
0x00000006(DRVIFACE:778)
7 07:50:12.750 07/02/05 Sev=Warning/2 CVPND/0xE3400003
Function QueryServiceStatus failed with an error code of
0x00000006(DRVIFACE:778)
8 07:50:15.750 07/02/05 Sev=Critical/1 CM/0xE3100004
Failed to initialize the ipsec driver! Returned 1
9 07:50:16.265 07/02/05 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of
0x00000002(DRVIFACE:725)
10 07:50:16.781 07/02/05 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of
0x00000002(DRVIFACE:725)
11 07:50:17.281 07/02/05 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of
0x00000002(DRVIFACE:725)
12 07:50:18.390 07/02/05 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of
0x00000002(DRVIFACE:725)
13 07:50:19.390 07/02/05 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of
0x00000002(DRVIFACE:725)
14 07:50:20.390 07/02/05 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of
0x00000002(DRVIFACE:725)
15 07:50:21.390 07/02/05 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of
0x00000002(DRVIFACE:725)
16 07:50:22.390 07/02/05 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of
0x00000002(DRVIFACE:725)
17 07:50:23.390 07/02/05 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of
0x00000002(DRVIFACE:725)
18 07:50:24.390 07/02/05 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of
0x00000002(DRVIFACE:725)
19 07:50:25.578 07/02/05 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of
0x00000002(DRVIFACE:725)
20 07:50:27.046 07/02/05 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of
0x00000002(DRVIFACE:725)
21 07:50:28.046 07/02/05 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of
0x00000002(DRVIFACE:725)
22 07:50:29.046 07/02/05 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of
0x00000002(DRVIFACE:725)
23 07:50:30.046 07/02/05 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of
0x00000002(DRVIFACE:725)
24 07:50:31.046 07/02/05 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of
0x00000002(DRVIFACE:725)
25 07:50:32.046 07/02/05 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of
0x00000002(DRVIFACE:725)
26 07:50:33.046 07/02/05 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of
0x00000002(DRVIFACE:725)
27 07:50:34.046 07/02/05 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of
0x00000002(DRVIFACE:725)
28 07:50:35.046 07/02/05 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of
0x00000002(DRVIFACE:725)
29 07:50:36.046 07/02/05 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of
0x00000002(DRVIFACE:725)
30 07:50:37.046 07/02/05 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of
0x00000002(DRVIFACE:725)
31 07:50:38.046 07/02/05 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of
0x00000002(DRVIFACE:725)
32 07:50:39.046 07/02/05 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of
0x00000002(DRVIFACE:725)
33 07:50:40.046 07/02/05 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of
0x00000002(DRVIFACE:725)
34 07:50:41.046 07/02/05 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of
0x00000002(DRVIFACE:725)
35 07:50:42.046 07/02/05 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of
0x00000002(DRVIFACE:725)
36 07:50:43.046 07/02/05 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of
0x00000002(DRVIFACE:725)
37 07:50:44.046 07/02/05 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of
0x00000002(DRVIFACE:725)
38 07:50:45.046 07/02/05 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of
0x00000002(DRVIFACE:725)
39 07:50:46.046 07/02/05 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of
0x00000002(DRVIFACE:725)
40 07:50:47.046 07/02/05 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of
0x00000002(DRVIFACE:725)
41 07:50:48.046 07/02/05 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of
0x00000002(DRVIFACE:725)
42 07:50:49.046 07/02/05 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of
0x00000002(DRVIFACE:725)
43 07:50:50.046 07/02/05 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of
0x00000002(DRVIFACE:725)
44 07:50:51.046 07/02/05 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of
0x00000002(DRVIFACE:725)
45 07:50:52.046 07/02/05 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of
0x00000002(DRVIFACE:725)
46 07:50:53.046 07/02/05 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of
0x00000002(DRVIFACE:725)
47 07:50:54.046 07/02/05 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of
0x00000002(DRVIFACE:725)
48 07:50:55.093 07/02/05 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of
0x00000002(DRVIFACE:725)
49 07:50:56.546 07/02/05 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of
0x00000002(DRVIFACE:725)
50 07:50:57.562 07/02/05 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of
0x00000002(DRVIFACE:725)
51 07:50:58.562 07/02/05 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of
0x00000002(DRVIFACE:725)
Any ideas as to the cause and the resolution?
This is for my home system on a DSL system with a dynamic IP address
running XP. I know the configuration is correct because the same config
works on another machine at work.
- 15
- Windows XP Support >> Explorer doesn't load at logonRunning Windows XP Pro Sp2 In a Windows 2003 AD network.
User logs on to computer after a reboot, and just sits and stares at his
wallpaper... the explorer shell never loads.
Hit CTRL-ALT-DEL and bring up Task Manager. Click File > New Task and type
in explorer and the desktop loads just fine.
The key HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon
has a value of Explorer.exe.
Has anyone else run into this before? Any help would be much appreciated!
|
|
|