| Using Hebrew fonts on Windows XP |
|
 |
Index ‹ Windows XP ‹ Windows XP
|
- Previous
- 1
- Windows XP Update >> WU Error 0x80240004Hello all,
I get the above error when I try to load the new Windows Update software. I
am running XP Pro on an HP Pavilion 9800, 1.4 GHz P4, 512 meg Ram; I also
have Norton Internet Security 2003 installed and running. I've tried adding
the various WU URLs to NIS's firewall without luck. What's going on here?
- 2
- Windows XP >> Sysyem Restore: The REAL Reason it REPEATEDLY Cannot RestoreNumerous users have complained here about System Restore (SR) repeated
failing with the message:-
"Restoration Incomplete. Your computer cannot be restored to (whatever
point was selected). No changes have been made."
Various reasons for this have been offered here:-
1) Corrupt SR Point - most popular
2) Full SR disk space
3) SR Service not running
4) Improper or interrupted system shut-down - only reason offered by M/Soft KB
5) Norton AV 2006 Auto-protect is on
and a few cures have been proposed:-
1) Turn SR off then on (losing all but 1 SR Point) - most popular
2) Run in Safe Mode
3) Reinstall SR
While most of these reasons would explain the occasional failure of SR, they
do not address the REPEATED FAILURE of SR in this way.
The most likely reason for a repeated failure is that there is another
(non-system) disk drive that contains remnants of a SR points' storage area
(\System Volume Information) including repeats of some of SR controlling
files.
The way to fix this situation is to:-
1) Turn OFF SR on the other non-system drive ONLY
2) Do any or the required SR - this should succeed
3) Turn ON SR on the other non-system drive
4) All subsequent SRs should now succeed
I had been getting this SR failure EVERY time I tried it in the past 9 to 12
months. Altho I did not realise it at the time, I had installed a spare
system disk drive from an old XP Pro PC as a 2nd drive (E:) on my current XP
Home PC during that period. It wasn't until I tried turning off SR on E:
alone and SR started to work reliably again, that I cottoned on to the root
cause :-)
- 3
- Windows XP >> taskbarwhen I make any changes to the taskbar it always comes
back the same as before when I reboot. In other words I
can't make any permanent changes
Would greatly appreciate your help
- 4
- 5
- Windows XP Hardware >> dynamic drive partitionI recently brought win XP and wanted to create a
partition on my HD to install it on. After trying I found
that its not a 'basic' HD its 'dynamic' and I can only
create a volume. I can't follow the win help topic on
this for the command prompt or through control panel (it
seems incomplete or wrong??).
Can someone please help me I'm keen to have my comp
running sweet by formating and paritioning (volumising?)
my Hard disk.
Thanks,
Blake
- 6
- 7
- Windows XP Setup >> Windows XP OEM Re installationOK so i can boot from the Windows XP disk setup, but now... right after
pressing enter for setup; the computer decides to tell me that I have no hard
disks! So i freaked out and rebooted back from the HD to make sure the setup
program was lying, which it was. What is causing this? How can i fix this?
- 8
- Windows XP Support >> Auto Account creationHey,
at work we have a very dynamic environment where we have to replace
PC's everyday, sometimes a PC could have like 40 profiles.. we have to
login to each profile to create it.. them we can copy the old profile
data from the old PC to the new one.. is there a way in which we dont
have to login to each profile?!
- 9
- Windows XP >> Failure Audit on Event LogHi, I have this error:
Event Type: Failure Audit
Event Source: Security
Event Category: Object Access
Event ID: 560
Date: 9/28/2007
Time: 10:28:52 AM
User: CAPACOMCY\kurdaneta
Computer: CAPACO-MCY
Description:
Object Open:
Object Server: SC Manager
Object Type: SC_MANAGER OBJECT
Object Name: ServicesActive
Handle ID: -
Operation ID: {0,101857905}
Process ID: 612
Image File Name: C:\WINDOWS\system32\services.exe
Primary User Name: CAPACO-MCY$
Primary Domain: CAPACOMCY
Primary Logon ID: (0x0,0x3E7)
Client User Name: kurdaneta
Client Domain: CAPACOMCY
Client Logon ID: (0x0,0x6123337)
Accesses: READ_CONTROL
Connect to service controller
Enumerate services
Query service database lock state
Privileges: -
Restricted Sid Count: 0
Access Mask: 0x20015
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
I have Windows 2003 Server and the all workstations have installed Windows
XP SP2; I need you help to resolve this error.
NOTE: But I include the account on Domain Admins group, this account don't
show me this error on event viewer, and then I out this account from Domain
Admin group the error show me againt.
Please let know.
- 10
- Windows XP Security >> Browser Settings ChangeI have been having a problem for some time now with my
homepage being reset to (what looks like) a microsoft
site. The text in the search bar always refers to a file
called gjyhy.dll. I have changed all my settings in the
HKEY_LOCAL_MACHINE AND HKEY_CURRENT_USER directories to
remove references to this file, but they just keep
reappearing. I presume there must be a file somewhere that
is causing this, but neither my McAffe virus scan nor a
search using the McAffe privacy service have found
anything suspicious. It's driving me crazy! Does anyone
know how I can find out what's causing this.
Thanks
Richard
- 11
- Windows XP Security >> How do I make files on a second drive private...?I'm new to XP...but I managed to find how to make files and folders on my C: drive private. However, I also have a second hard disk in the computer (D:) and when I try to make selected folders private, it isn't an available option. Anyone have any suggestions as to how I can proceed...? Thanks, Lee.
- 12
- Windows XP Support >> Windows 98SE keeps changing proxy.A friend of mine has windows 98SE and it seems to keep changing to Proxy in
Internet Options. She has to go in and uncheck it at least four times a week.
Thanks all for the help. Y'all have a Happy and safe Holiday Season.JJ
- 13
- Windows XP >> Searching in Windows XPI want to change the way I search. The help section says
"To change the appearance of Search Companion
Click Start, and then click Search.
Click Change preferences.
Click Change files and folders search behavior.
Click Standard to be able to search for a variety of
things, such as files, folders, and people, from one
location.
The problem is the option "Change preferences" is not
there.
What do I do?
- 14
- Windows XP Support >> "1. The InstallScript engine on this machine is older..."Dear microsoft.public.windowsxp.help_and_support:
I am having problems installing a program and have exhausted the
technical help for the program, have gone through every page of the
InstallShield help site and applied every applicable fix. Nothing has
worked, I still get the: "1. The InstallScript engine on this machine
is older than the version required to run this setup." I have the
appropriate InstallShield version installed.
My computer is running Windows XP Home Edition, Version 2002, SP 2 on a
Compaq Presario S3000V.
Any help would be greatly appreciated, this has been inordinately
frustrating. Thanks, Mona
- 15
|
| Author |
Message |
G3Sys
|
Windows XP >> Using Hebrew fonts on Windows XP
I am trying to use hebrew on XP and not getting far. I
have loaded the hebrew support via control program
languages and added hebrew to my list of languages. I
changed the font in Wordperfect to Miriam and all I could
get was little rectangles instead of letters when I typed.
What to do????
Windows XP681
|
| |
|
| |
 |
| |
|
Index ‹ Windows XP ‹ Windows XP |
- Next
- 1
- Windows XP Update >> Unable to update from microsoftI am running XP Professional, Internet Explorer 6.00.2900.2180 xpsp-sp2
........, and Outlook Express 6.0.2900.2180............
When I select on Internet Explorer the option (Tools) Windows Update, I get
the following message:
Thank you for your interest in obtaining updates from our site.
To use this site, you must be running Microsoft Internet Explorer 5 or
later.
To upgrade to the latest version of the browser, go to the Internet Explorer
Downloads website.
Why does IE think I am running an older version, and how do I get an update
if it thinks the version is not correct?
What is even more curious, this error message occurred at every attempt to
run the update check last Sunday, Monday and Tuesday.
On Wednesday, I was able to (repeatedly) contact the update site, have
checks made for any required patches, and download as applicable.
Come Thursay and today (Friday), and that error message is back, on every
occasion.
Is this a problem with accessing Microsoft?
I have made no changes to firewalls, security options, cookies, link page
blocking etc.....
Any ideas please?
Regards
Eric
- 2
- Windows XP Hardware >> Can I or Not JBOD, just a bunch of DrivesI got the Asus A8V Deluex and putting it together and need to know
If I use the Raid for Faster Drives, (SATA 150), ans set it as JBOD, is it the
same as like a eide would be, in other words, not sharing wruting and readin
between two drives ?
I want the speed, but nothing else, where do I stand ?
--
------------------------------------------
All In and Out Virus Scanned
- 3
- Windows XP >> Solution: Help and Support Center and Microsoft System Information don' t run> If You have installed IconPackager, uninstall it. On my Computer,
> Windows XP Home Edition SP2, Iconpackager blocked Help And Support
> Center and Microsoft System Information. If I clicked MSI or
> H&S Center the cursor changed to an hourglass, stayed like that for a
> second or two, and then changed back to a cursor. Nothing appeared on the
> screen. Uninstall IconPackager, if You have it on Your Computer, and solve
> this problem.
>
> Bye
If you don' t want to uninstall Iconpackager:
Iconpackager > Menu Tools > Disable "Repair shell icons" > reboot your
computer
- 4
- 5
- Windows XP >> Re-Install XPHave a Fujitsu laptop with only USB inputs.
Have Formatted the hard drive and am ready to re-install XP but am unable to
access the external liteon combo SOHC-5232KX drive.
A:\ drive is working fine via an external usb floppy.
Assume I have to add a driver to the Config.sys file but am unsure.
Is this true and if so need to know what command to use.
- 6
- Windows XP Network >> Internet connection really slowWhile logging onto the internet it usually takes about 3
minutes to load up a Web page. Even if not going through
IE, downloads and browsing are slow, whatever I use. I've
ran adaware to get rid of a lot of junk. but still no
change. Anything I can check?
- 7
- Windows XP >> image resizer caused a problemI reinstalled XP home and since then i can't change the name of the file without adding the file extention to it. An example would be right clicking on a photo on the net, goto "save as" if i leave the name as it is, it saves it fine (even though there is no file extention shown) if i try to change the name it saves it but when i check the type of file it reads "file type: file" and i can't open it unless i rename it with the .jpg extention or whatever the original was named. also i'm not changing the "save as type" when saving. The problem started after I installed image resizer, I removed image resizer through add/remove programs but I stiil have the same problem, Thank
- 8
- Windows XP Security >> Logoff/Shutdown QuestionI am having a problem on Windows 2000 and XP Pro when a user selects Restart
the computer will just log the user off. Once logged off the can press
CTRL-ALT-DEL and then select shutdown then restart and it will work. I'm sure
its a registry setting somewhere but can't find it. I talked to people in the
IT dept with me and no one knows of a change we did that would cause this.
- 9
- 10
- Windows XP Update >> failed updateshi all its my first time here,for some reason i can not update windows it
reads error 0x8ddd0003 disabled by your system administrator. im not sure why
this is as i have received other up dates, so if some one could explain this
to me and any help would be great
- 11
- 12
- Windows XP Perform Maintain >> How to remove a file that's infected?A file has been identified on my pc as being infected
with a Trojan Horse virus but when I try to locate it, I
can't find it. I only get the warning of the virus being
detected after I start up Internet Explorer and it resets
my home page. File name/location winnt/DNSErr.dll
I have WinXP home and am running Norton Antivirus 2004
but it can't remove the virus.
Any suggestions?
- 13
- Windows XP Support >> TWAIN_32 folderHi all,
I have a Dell Dimension 8300 series with Windows XP Home (German) and
Service Pack 2 with all the latest updates.
I have a Mustek BearPaw 1200CU scanner and when I try to install the driver
and panel from the CD, it aborts in the middle of the installation.
I go to C:\Windows\TWAIN_32 and see a folder called: S6U12K
When I click on the folder, I get an 'Access Denied' error and I cannot
browse the folder or delete it, even in Safe Mode.
How can I solve it?
Thanks,
Ivan
- 14
- Windows XP Security >> Michelle KightleyI am currently using Windows XP. Every time I access Internet Explorer security messages pop up. This prevents me from using several web pages
Microsoft Internet Explore
" Your current security settings prohibit running ActiveX controls on this page. As a result, the page may not display correctly
I have tried changing my levels of security from medium to low and high. This hasn't made any difference. The messages still pop. My security setting is currently set on 'low'
Any ideas???
- 15
- customize >> Folder settings gone haywireI just formatted my harddisk and reinstalling Win XP Pro and SP1. After
painstakingly setting the folder view and folder picture for every folder in
My pictures, I noticed that some folder settings are "cross-contaminated" by
settings from another folder from a different location. I had edited the
registry with the bags8000 registry edit provided for some other queries but
this problem seems to persist.
Furthermore, the settings were totally different when I access the My
Pictures folder through My Computer>My Documents>My Pictures from when I
access the My Pictures folder direct through the Start menu. How is this so?
Does this mean I have to set every individual folder setting for both
pathways?
|
|
|