| Troubleshooting SCSI Scanner |
|
 |
Index ‹ Windows XP ‹ Windows XP Hardware
|
- Previous
- 1
- Windows XP Setup >> Setup Failed during Install Of XP Home SP1 Error# fffffb4aI just installed a new hard drive on my computer and I wanted to re-install
windows on to it when the Drive to Drive copy failed. I erased the partition
on the original drive and wanted to reinstall windows on to the new drive.
The setup found an installation of windows on the new drive (because I copied
it) and asked if I wanted to repair it instead of doing a fresh install. I
chose to do a repair. When the timer says 39 minutes remaining (it sits
there or some time) it gives me an error saying this:
"Setup failed to install product catalogs. This is a fatal error. The setup
logs should contain more info."
Setup Log:
"The signature for Windows XP Home Edition Upgrade is invalid. Error Code
is fffffb4a.
The System cannot find message text for message # 0xfffffb4a in the file for
syssetup.dll"
Then it restarts and instead of going back to the original setup menu asking
me if I wanted to repair or do a clean install it goes back into the
installation and attempts to pick up where it left off, giving me another
error. I just want to start over and do a fresh installation, please help!
- 2
- Windows XP >> Copy error message on bootup since last updateHi all,
Ever since I've done the last Microsoft Windows update,
I've received the following error message when I click on
one of the profiles on my Windows XP Home system:
"Windows cannot find 'copy.' Make sure you typed the
name correctly, and then try again. To search for a
file, click the Start button, and then click Search."
I've noticed that there are a few people here in this
newsgroup that are having the exact same problem. Any
assistance concerning this issue would be appreciated.
Thanks in advance!
Sincerely,
Chris Z.
- 3
- Windows XP Hardware >> start upcan anyone help me? When i start up my computer, I get a
blue screen saying ' a fatal exception 0E has occured at
0167:BFF8AB97' thank you
- 4
- Windows XP Network >> Error 67 with login script - too fast?The login script I use works well in my peer-to-peer environment, except
when I want it to be executed at startup.
My computer has automatic loging into main account (using TweakUI) and the
login script is executed at startup but can't map any share drive (Error
67). I tried both share names and IP with NET USE command. Weirdly enough,
the SAME script launched manually just a few seconds after startup works
well.
- If I login into Windows with a logon screen (classic or XP-Style), the
script will works because Windows will have finished to startup in
background. If Windows autologon using TweakUI, the script won't work, like
if it was running few seconds to early. Lauching it manually after startup
and the script will work.
- Same behavior with Prefetch. If the prefetch directory is empty, the
script will work. If the prefetch is not empty, Windows starts faster and
the script won't work when launched the first time. I have to launched it
manually
The only solution I found is to "wake up" the LAN by pinging it quite a few
times, but then the login delay is tedious.
Here is the script:
@echo off
Title Connection
echo Connection en cours
Ping serveur -n 1 | find " TTL="
if errorlevel 1 goto WakeIt
goto NoWake
:WakeIt
Title Connection **
ping localhost -n 20
Ping serveur -n 1
:NoWake
net use R: "\\serveur\data" /persistent:No
net use S: "\\serveur\lib" /persistent:No
net use T: "\\serveur\musique" /persistent:No
Ping bureau -n 1 | find " TTL="
if errorlevel 1 goto NoBureau
net use U: "\\bureau\data" /persistent:no
net use V: "\\bureau\lib" /persistent:no
:Nobureau
Ping famille -n 1 | find " TTL="
if errorlevel 1 goto NoFamille
net use w: "\\famille\lib" /persistent:no
:Nofamille
* * *
My guess is that this error 67 is related to master browsing delay.
Anyway suggestion to solve this?
- 5
- Windows XP Hardware >> Video Card or RAM issue?I'm working on a friends machine running an Athlon processor, Windows XP Pro
and 512 MB of Crucial memory with an NVidia Ti4600 video card. The machine
will not boot normally, only to Safe Mode. Some, not all, desktop icons are
blacked out. Same for some taskbar icons. Mouse movement or clicking an
icon can result in blocks of black stripes that do not go away unless
another window is opened or the machine is rebooted.
There was an error message regarding the video driver from NVidia, but
Device Manager shows no problems at all. When I cracked the box and checked
the RAM I found one stick in contact with the edge of the video card. Just
enough contact to see it and feel it when removing or inserting the stick in
its slot. I removed hundreds of items of spyware, adware (Ad-Aware found
174 items!) and other malware as this system was not protected in any way
and is cable modem connected to the internet.
Does anyone have any ideas about the problems? At this point, I am leaning
toward uninstalling the video card drivers and reinstalling to see if that
is the cause. When I left the machine last night it was cycling black
screen and desktop at regularly spaced intervals. Could bad RAM be suspect
here? What about both bad RAM and a bad video driver or even failing video
card? It would seem that both failing at once would be a low probability.
Any help will be appreciated. I'm returning this evening to try a couple
more things on this machine.
- 6
- 7
- Windows XP Update >> new user can't login from the networkAfter completely rebuilding my SBS2003 server onto a new harddrive and
restoring all previous users, I attempted to add a new user. The process went
smoothly but the user cannot login from any workstation.
I was able to log her in directly to the server so I know that her
credentials are good.
I set her up both using the wizard as a power user and manually through
users and computers using a standard template. The process worked fine for my
other users (who were users on the old system).
Any suggestions on where to look?
--
John Hill mcse,cne,a+
- 8
- Windows XP >> system start upI have one I cannot seem to figure out. When I boot my system I
allways get a small window that says the following in it. Trial
Period Expired! Please Register! I have tryed several things from
the registry to start up options. No Luck so now I turn to you for
help. Tells nothing about what program it would be for if it is that.
Any help would be great .
Thanks Eric
- 9
- Windows XP >> rst virushello and good evening to everyone?
Please can anyone tell me what virus this is and what harm can it do, rst
217.146.188.193.
--
bsmart35
- 10
- Windows XP >> El Torito CD from iso imageI have a ten year old laptop that won't boot from modern boot cds.
Is there an easy way to take the contents of a .iso image and
convert it to an El Torito disk?
TIA
- 11
- Windows XP Support >> one problem, one questionI have a problem on my son's computer... When he turns
it on, it boots to win XP in a timely manner. When he
logs on (or the administrator in Safe Mode as well), an
error message comes up that says 'Windows will have to
shut down because of an RPC error or something like that.
Anyone know what causes this and how to repair it?
Also, how do you add items to the 'Save As' menu on
Word? I saw an item explaining it months ago but didn't
want to do it. I do now!
Skip
- 12
- Windows XP Perform Maintain >> can't load windowshi, this is a new computer, got it last week. Its a
windows xp professional. WHen i turn on my computer, its
fine, but after the point where it shows the windows xp
logo and shows that its loading, the monitor either stays
blank or it tells me that its not getting a signal.
SOmetimes it does work but the color resolution and size
is extremely terrible. I need help, its impossible i broke
it already since its new
- 13
- Windows XP Support >> DOS in VistaHi Folks,
I can't find a Vista group on my server, so this was my next best
choice. Does anybody know if Vista will run old DOS programs, the way
XP does? Any advice would be much appreciated. Thanks.
Ken
- 14
- Windows XP >> Software RegistrationDoes anyone know where to find the software product key ?
I need to reinstall Windows XP and I have lost the folder
that had the software product ID, is there anyway to find
it ?
Thanks
Rick
- 15
- Windows XP Network >> Remember Network Key - Wireless SetupI'm trying to use encryption on my wireless network but
unfortunately I can't get it to save the network key
settings after specifying them.
Specifically I'm trying to use WPA-PSK with a passphrase;
but windows will not store the key and instead I am
prompted for the key everytime a new wireless connection
is established, when using WEP the key is not stored
either.
Everything is setup and working fine I just don't want to
have to type the key in every time I restart my computer,
end users would have trouble navigating to the network
configuration area and typing in my secret passphrase,
even if I wanted to let them know what it was!
Any help would be appreciated.
|
| Author |
Message |
Andrew
|
 Posted: Fri Jul 18 03:18:25 CDT 2003 |
Top |
Windows XP Hardware >> Troubleshooting SCSI Scanner
I am having trouble getting a scanner to work in XP. It's
a AGFA DuoScan. My SCSI card is installed, and is up to
date, as well as the scanner software, but it still won't
find the scanner. I get this message when trying to
import in photo shop:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
COULD NOT FIND AN AGFA SCANNER.
CHECK THE POWER AND CONNECTIONS.
Make sure you installed the necessary drivers for your
SCSI board.
Check all cables and connections and make sure the power
switch is
turned on. Also verify that a unique SCSI ID is assigned
to each device
and that the SCSI chain is terminated at the first and
last device on the scsi cable.
STI driver installation
Driver successfully installed
Could not find an Agfa scanner on host adapter 0 (STI)
NT SCSI driver installation
Driver successfully installed
Could not find an Agfa scanner on host adapter 0 (atapi)
Could not find an Agfa scanner on host adapter 1 (atapi)
Could not find an Agfa scanner on host adapter 2 (aic78xx)
32 bit ASPI driver installation
Driver successfully installed
Could not find an Agfa scanner on host adapter 0 (AIC78XX)
32 bit ASPI driver installation
WNASPI32.DLL initialization failed.
EPP2 driver installation
SCNDRVxx.DLL initialization failed.
RPC driver installation
Not supported
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The only thing I can figure is that it isn't assigned a
correct SCSI ID? (but I'm not all that familliar with
SCSI). The scanner manual said it should be 2 by default.
I am kind of in a crunch and really need to get this
scanner working. I have been to AGFA, Adaptec &
microsoft's webpages, and have updated everything I can
find to update, and been through all the troubleshooting
topics I could find, and even uninstalled and re-
installed the adaptec controller. I am stumped as to why
it doesn't work (it worked on a previous computer with
xp, using the same SCI card). Any help would be VERY MUCH
appreciated. Feel free to email me at
EMail@HideDomain.com. Thanks so much!
Jesse
Windows XP226
|
| |
|
| |
|
Millicer
|
| Posted: Fri Jul 18 03:18:25 CDT 2003 |
Top |
Windows XP Hardware >> Troubleshooting SCSI Scanner
You can check the SCSI ID for devices on Adaptec PCI controllers as
follows.
During booting, after Bios memory tests etc, and *before* Windows gets a
look in, a message should pop up suggesting you press Ctrl-A. Do it. That
gets you into the Adaptec SCSI setup screen. Choose the displayed options
in turn. One of them will scan the SCSI bus and tell you what it found. If
it does not find the scanner, there's your problem. Having found the device
ID, go back to the setup screen. Generally, make sure all the options are
set to their default values. It's just possible that your scanner may need
to have the data rate throttled back for it to work properly - a long shot
though. 10M is more than enough for scanners.
You might also try the WinXP troubleshooter which you can get to by
searching for SCSI in "Help".
Richard M.
"Jesse Weed" <EMail@HideDomain.com> wrote in message
news:05f401c34cf3$b9985d00$EMail@HideDomain.com...
> I am having trouble getting a scanner to work in XP. It's
> a AGFA DuoScan. My SCSI card is installed, and is up to
> date, as well as the scanner software, but it still won't
> find the scanner. I get this message when trying to
> import in photo shop:
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
> COULD NOT FIND AN AGFA SCANNER.
> CHECK THE POWER AND CONNECTIONS.
>
> Make sure you installed the necessary drivers for your
> SCSI board.
> Check all cables and connections and make sure the power
> switch is
> turned on. Also verify that a unique SCSI ID is assigned
> to each device
> and that the SCSI chain is terminated at the first and
> last device on the scsi cable.
>
> STI driver installation
> Driver successfully installed
>
> Could not find an Agfa scanner on host adapter 0 (STI)
>
> NT SCSI driver installation
> Driver successfully installed
>
> Could not find an Agfa scanner on host adapter 0 (atapi)
>
> Could not find an Agfa scanner on host adapter 1 (atapi)
>
> Could not find an Agfa scanner on host adapter 2 (aic78xx)
>
> 32 bit ASPI driver installation
> Driver successfully installed
>
> Could not find an Agfa scanner on host adapter 0 (AIC78XX)
>
> 32 bit ASPI driver installation
> WNASPI32.DLL initialization failed.
>
> EPP2 driver installation
> SCNDRVxx.DLL initialization failed.
>
> RPC driver installation
> Not supported
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
> The only thing I can figure is that it isn't assigned a
> correct SCSI ID? (but I'm not all that familliar with
> SCSI). The scanner manual said it should be 2 by default.
> I am kind of in a crunch and really need to get this
> scanner working. I have been to AGFA, Adaptec &
> microsoft's webpages, and have updated everything I can
> find to update, and been through all the troubleshooting
> topics I could find, and even uninstalled and re-
> installed the adaptec controller. I am stumped as to why
> it doesn't work (it worked on a previous computer with
> xp, using the same SCI card). Any help would be VERY MUCH
> appreciated. Feel free to email me at
> EMail@HideDomain.com. Thanks so much!
>
> Jesse
|
| |
|
| |
|
| |
|
Index ‹ Windows XP ‹ Windows XP Hardware |
- Next
- 1
- Windows XP Support >> TV CommercialI have seen now several times a commercial on cable TV regarding a program
titled Transfer Ease. not totally sure of the spelling. Program states it
includes a CD, Cable, able to transfer files from one computer to another,
with ease. Anybody also see it?. Price is minimal, not the concern, just the
program itself. Appreciate any comments.
- 2
- 3
- 4
- Windows XP >> ASPI - Nero - INcDIf you're having problems with Nero/ASPI/INcD, this url for Nero will solve
your CD burning problems. It did mine.
http://ww2.nero.com/nero6/enu/Utilities.html
Click on the Tools link and follow the instructions for each step:
Support Tools
Info Tools
Clean Tools
CD/DVD-ROM Test
ASPI Driver
System Updates / Libraries (if applicable)
It has easy, thorough instructions, and I was able to burn a CD after I
rebooted for the last time.
Denise
- 5
- Windows XP Perform Maintain >> What is going on?Yesterday while I was working on a program all of the sudden the computer just shuts off. Now when I start the computer up everything is fine up to the profile select page, then when I select a profile it takes almost 2 minutes for the desktop to load.
I tried going to my computer, properties, advanced, startup and recovery to disable auto restart but the program won't open and I get the "is not responding" message.
What is going on here?????
- 6
- Windows XP MovieMaker >> Movie maker 2 won't start - corrupt collections file?Just downloaded MM2 and it won't start. I get 2 error
messages - "the collections file is not valid or is
corrupted. A new empty collections file has been created".
followed by "the specified module could not be found"
followed by "a new collections file cannot be created"
The program then gives a MS error report message and
closes.
Can anyone help?
- 7
- Windows XP >> Error when booting from CDWhenever I boot from the XP Pro CD (OEM) which I have had
to do a couple of times on my Dell I get an error during
the time it is loading system stuff. The error is
"An unexpected error (16384) occured at line 5133 in
d:/xpsp1\base\boot\setup\setup.c"
After that all seems to go according to plan but I have
had a few troublesome glitches.
Any thoughts would be helpful.
- 8
- Windows XP Perform Maintain >> Outlook & Explorer problemI got a small "Windows Update" this morning that
automatically installed itself. There was no need to
reboot after the install but I have rebooted several times
since then. Since the Update & install, I can't get cursor
or keyboard control in Outlook. The cursor can be seen on
the screen as an arrow but will not attach to any text.
The keyboard won't work period. I can't send emails & when
I tried to reply to one, the whole email was kicked into
the Drafts folder. Anybody else having this glitch &/or
any suggestions?
Mike
- 9
- Windows XP Support >> Some users get error 1325 when trying to install softwareI have just been told that over the past few months certain users get the
following error message when they try to install software (seems to be .msi
files):
Error 1325. USERSNAME is not a valid short file name.
The error message only occurs at one site, both sites computers are loaded
from the same image.
I have Windows XP SP2 computers setup in a domain across 2 sites, I use
group policies to control user access etc.
I have compared GPO's from each site, for each set of users, they're almost
identical apart from version numbers and site specific folder redirections.
The site with the errors does have an entry for one set of computers (not
all) about software install, with nothing in it, but no matter what I
change, I cannot remove it.
Any ideas what I could try next to get rid of this problem?
Thanks
- 10
- 11
- Windows XP Setup >> Updating front page please help!!Hi at the website justzelda.zeldacentral.net we lost our administrator and we
now cannot update our front page. The admin had sent me a folder to connect
to the website and i need to know how to update the front web page.
Please take alook at the site and let me know if you can help
if you can PLEASE DO you will be making very very many people happy
justzelda.zeldacentral.net
- 12
- Windows XP >> XP Home sp2 DEP questionI have an ABIT IC7 mobo, 1GB Geil DC DDR, P4 2.8C
processor. The Data Execution Prevention featured is
greyed out and the message says due to hardware design
your processor doesn;t support DEP. Is that normal for a
newer processor?
- 13
- Windows XP Setup >> Pictures in PDF icons in 'My documents' fileWhen I store PDF-documents in the file 'My documents' I sometimes can see
the first page of the document (like I can see a picture) in the icon of the
document and sometimes not. What can I do to see the first page in all the
PDF icons?
I have MS Windows XP Version 5.1 with Sevice Pack 2.
- 14
- Windows XP Setup >> System32 Trojan horseI made a post a while ago about system32.exe. It runs
out that this file was a trojan horse. It's great that
it is gone but now I'm trying to figure out how to get
rid of the box that shows up when I start up my computer.
Thanks,
Ron
- 15
- Windows XP >> HELP: Installshield-like installersI wasn't sure where to post this since it's not 100% programming related. I
need advice on installers to give to my company clients so that it installs:
- .NET 2.0 Framework Run-time (22MB)
- installs some ASP.NET files into specified web/IIS folder
- ensure/set aspnet_wp user account full access on specified web/IIS folder
What installer can do this? Are they free programs, and where to get from?
|
|
|