 |
|
Index ‹ Windows XP ‹ Windows XP Setup
|
- Previous
- 1
- Windows XP >> REGISTRATION HOMEHI, I RECENTLY PURCHASED A HOME EDITION OF XP. I PUT IT ON MY OLD COMPUTER AND REGISTERED IT. NOW I HAVE A SECOND COMPUTER AND I AM TRYING TO REGISTER IT ON THIS ONE ALSO. AM I ALLOWED TO DO THIS? I KEEP GETTING ERRORS. I REALLY HAVE A HARD TIME WITH THIS KIND OF THING ANYWAY. ANY ADVICE WOULD HELP. THANKS. LLSTAR
- 2
- Windows XP >> System does not boot - URGENTHi,
I have an XP system that suddenly will not boot up. It gets as far as
the Windows XP screen, then goes blank, and nothing. I tried to boot
into safe mode and it stopped at the file MUP.SYS. I booted into the
recovery console using the WinXP CD and tried a chkdsk /R c:\. THis
finished after quite some time and did not help. I then tried to
replace MUP.sys with the one from the CD. Same. Then I tried DISABLE
MUP and then it stopped at the file right before MUP (NDIS.sys).
Reinstallation is not an option here. Any ideas on what I can do? Is
there a way to run sfc from the recovery console?
Thanks.
- 3
- Windows XP Security >> RE: System 32 "Shared Task Scheduler": know this task object or other?McAfee System Guard Protection asked me if I wanted to accept:
User_Feed_Synchronization-{30E3CCD7-52BB-4824-88BD-BB5076DAAD79}.job
which is apparently a "task object" (I think?) under C:WINDOWS\Tasks\ and
having to do with the process System 32\svchost.exe version 5.1.2600.2180,
"Shared Task Scheduler".
(1)What is this? I said no I don't accept, because I didn't do anything new,
didn't know what new task was needed, but is it needed? (2) Then I was
surprised the McAfee report/log noted my nonacceptance as a system guard
-change in future behavior... Can anyone clear this up? Thank you.
- 4
- Windows XP >> Network ProblemI have a small two-computer network, with each computer running Windows =
XP SP1 (one computer is XP Home, the other XP Professional). The XP Home =
computer is running the free Zone Alarm 3.7.202 without a problem. If =
the XP Professional Computer is running the built-in Windows firewall, =
everything is fine at first--each computer can see the other--then a few =
minutes later, trying to reach the XP Home computer from the XP =
Professional one results in the message=20
An error occurred while reconnecting Z: to \\Eileen\C
Microsoft Windows Network: the local device name is already in use.
The connection has not been restored.
If instead of the built-in firewall, Zone Alarm is running on the XP =
Professional machine, that message appears immediately.
I did a Google search on "the local device name is already in use" and =
found a couple of sites that suggested I use a different drive letter =
for mapping. So I changed the mapping from Z: to X: with the same =
results.
Each machine can Ping the other without a problem. Any suggestions as to =
what might be wrong or how to fix it? Suggestions on a more appropriate =
newsgroup for the problem are fine too.
--=20
Ken Blake
Please reply to the newsgroup
- 5
- Windows XP Security >> Norton and Win XP Problems (diff machine)I have a freinds computerwhere they tried to delete Norton then install CA
Etrust (bad uninstall for Norton 2K5) IT HAS CAUSED ALL KINDS OF PROBLEMS:
1.) Windows installer has problem - wants Norton disk for any program
2.) On startup get Error message "NDA Error - Failed to initialize scripting
engine for JavaScript"
3.) Windows Update website loads to a blank page - no error message just
blank page
4.) Upon trying some fixes from Kellys corner I got te error message "
Windows Scipting Host - Cant find scripting engine "VBScript" for script
"C:\Documents and Settings\.... this leads me to beleive tat the VBSripting
engine is caput.
5.) Click on Help And Support and No help and support files come up.
There are probably a couple more problems I h
- 6
- 7
- Windows XP Support >> device error code 12:I am trying to fix a problem on a Dell Inspiron 5000e with SP2. The machine
keeps coming up with the below error for different devices. Removing and
reinstalling the driver for a Xircom ethernet card fixed that problem, but
when swapping that card for a Netgear WG511(v1) wireless card, the error
comes up again and I can't get rid of it.
This device cannot find enough free resources that it can use. (Code 12)
Apparently this setup (ACPI) doesn't support manual allocation of IRQ and
I/O addresses, so how can I fix this?
- 8
- Windows XP Perform Maintain >> welcome screen disabledhello can anyone help me please, my welcome screen and
fast user switching has been disabled by client services
for netware, message says to uninstall CSFN, but it wont
let me, how can i do this and re able welcome screen
etc,thanks in ant. graham
- 9
- Windows XP Update >> Windows update error 0xC8000586Has anyone been getting this error after the scan completes on the windows
update site. P.S.-The old version V4 of windows update worked fine till the
V5 was introduced. I have SP-2 Installed and everything else works fine, just
get error message after scan has completed on site.
- 10
- Windows XP >> Backup Profiles without Long LogonHi
We use roaming profiles for all our desktop users, but have a couple of
laptop users who work off-line and require access to my docs etc whilst away
from the office.
We tried using offline files but found that the users had slow logons and
logoffs and slower access to the files than regular users. Is there an
alternative method to backup their profiles to the server without using
Offline Files?
Thanks
B
- 11
- 12
- 13
- Windows XP Security >> How to access old account after re-installI had a power cut which needed a Windows re-install.
After install, my previous account exists in Explorer. But
i cannot access the folder - ACCESS DENIED.
My old account was password protected. All the files are
somewhere as 12 GB of my hard drive is still used. How can
i gain access to these files.
- 14
- 15
- Windows XP >> Stuck in LoopI need to reinstall the OS. I want to do a clean install
and I get stuck in a loop during setup when asked which
partition to install to (I currently only have 1). I
have the choice of deleting the partition or creating a
new partition. The option to create does not do anything
and I cannot create a new partition. If I try to delete
the existing partition, setup tells me that I cannot do
this because there are temporary setup files on the
partition. I cannot/don't want to install 2 OS on the
same partition. How do I get out of this loop and wipe
my machine to reload?
Thanks,
j
|
| Author |
Message |
Ramesh,
|
Windows XP Setup >> 553 error Outlook
I have just installed XP Office standard. I have no problem with IE
finding/displaying web pages.
However, using Outlook to create email messages, I get the message when I
select the send button.
553 To send mail, first check your mail with a valid POP account; this
prevents unauthorized SPAM relaying. (#5.7.1)
Any ideas.
Windows XP948
|
| |
|
| |
 |
| |
|
Index ‹ Windows XP ‹ Windows XP Setup |
- Next
- 1
- 2
- Windows XP Network >> DSL ConnectionThis is a multi-part message in MIME format.
------=_NextPart_000_000E_01C5604D.D0056550
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
My network in my house is Belkin. Can I use a Netgear WG602 54 Mbs =
Access Point?
_______________________
Peter A.
Nickels
http://www.freewebs.com/rockyandnickels/
http://www.freewebs.com/rockyandnickels/emma/
------=_NextPart_000_000E_01C5604D.D0056550
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2900.2627" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>My network in my house is Belkin. =
Can I use a=20
Netgear WG602 54 Mbs Access Point?</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV><FONT face=3DArial =
size=3D2>
<DIV>_______________________<BR>Peter A.<BR>Nickels<BR><A=20
href=3D"http://www.freewebs.com/rockyandnickels/">http://www.freewebs.com=
/rockyandnickels/</A><BR><A=20
href=3D"http://www.freewebs.com/rockyandnickels/emma/">http://www.freeweb=
s.com/rockyandnickels/emma/</A></DIV>
<DIV><A=20
href=3D"http://www.freewebs.com/rockyandnickels/emma"></A></FONT> </=
DIV></BODY></HTML>
------=_NextPart_000_000E_01C5604D.D0056550--
- 3
- Windows XP Security >> enable administrator-- hi all, can someone please tell me how 2 enable my administrator my XP
runs well its just some programs like system restore & disk keeper wont allow
me asess tells me 2 switch 2 administrator but my administrator is disabled,
could someone tell me how 2 sort this,...SKYLOG ?????
thanks in advance....Skylog
- 4
- Windows XP Hardware >> old harddrive, new computer?currently have a p4 computer with 40 gig hard drive. I would like to
install my old quantum 6.4 gig drive, with i took out of my old
unusable system. My old drive contains winxp and I set it up as a
master and slave with my new hard drive but my computer will not
recognize it. Is there anyway I can get this installed?
- 5
- Windows XP Support >> Help CD-Rom isn't working reboot not workingCD-Rom wouldn't work computer reconised the drivers for it but not the
drive it's self. (showed no D Drive at all anywhere). Replaced the ribbon
cable with a new one didn't help. BOught a brand new CD-Rom drive same
problem. Triued rebooting the Windows XP operating system from the cd went
all the way through the whole process booted up to install and got a "file
missing error". The file missing error message said that the "asms" file is
needed to continue. Whenever I try directing the computer to the file it
won't get it off the cd. The error message supposedly comes up whenever the
computer cannot find the CD-Rom Drive. So if it is finding the CD-Rom long
enough to repair the files but loosing it when it come time to install the
operating system. I have tried three different Windows XP installation CD's
with the same results and when I talked to Dell they said they would send me
a new Windows XP Cd which isn't going to help. ANyone have any suggestions
for me other than completely reprograming the whole computer. It is my
husbands computer and he doesn't want to loose everything he has stored on
the computer but I am not sure at this point if I can get a bootable gohst
copy off the computer. HELP ME I AM IN COMPUTER HELL. Thank You.
- 6
- Windows XP Update >> Updates can't install Windows Installer 3.1Hello,
I've just installed IE7 on my machine. When XP now automatically updates
itself, it attempts to install the Windows Installer 3.1, which fails with
the message:
"Updates were unable to be successfully installed
The following updates were not installed
Microsoft Windows Installer 3.1".
I've looked in the WindowsUpdate.log:
2006-12-30 16:09:43 1220 5a4 AU AU setting pending client directive to
'Install Approval'
2006-12-30 16:09:48 1220 5a4 Report REPORT EVENT:
{E98450B9-B836-4DFC-987B-83D30C58B295} 2006-12-30 16:09:43+0100 1 189 102
{00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Content
Install Installation Ready: The following updates are downloaded and ready
for installation. To install the updates, an administrator should log on to
this computer and Windows will prompt with further instructions: -
Microsoft Windows Installer 3.1
2006-12-30 16:09:52 1220 1ac AU AU found 1 sessions to launch client into
2006-12-30 16:09:52 1220 1ac AU Launched new AU client for directive
'Install Approval', session id = 0x0
2006-12-30 16:09:52 2384 954 Misc =========== Logging initialized (build:
5.8.0.2469, tz: +0100) ===========
2006-12-30 16:09:52 2384 954 Misc = Process:
C:\WINDOWS\system32\wuauclt.exe
2006-12-30 16:09:52 2384 954 AUClnt Launched Client UI process
2006-12-30 16:09:52 2384 954 AUClnt AU client got new directive = 'Install
Approval', serviceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}, return =
0x00000000
2006-12-30 16:09:52 2384 954 AUClnt AU client creating default WU/WSUS UI
plugin
2006-12-30 16:09:52 1220 8c0 AU AU setting client response for sessionId 0x0
to 'Pending'
2006-12-30 16:10:23 1220 1f0 AU AU setting client response for sessionId 0x0
to 'Active'
2006-12-30 16:10:26 1220 650 AU AU received install approval from client for
1 updates
2006-12-30 16:10:26 1220 650 AU #############
2006-12-30 16:10:26 1220 650 AU ## START ## AU: Install updates
2006-12-30 16:10:26 1220 650 AU #########
2006-12-30 16:10:26 1220 650 AU # Initiating manual install
2006-12-30 16:10:26 1220 650 AU # Approved updates = 1
2006-12-30 16:10:26 1220 650 AU <<## SUBMITTED ## AU: Install updates /
installing updates [CallId = {09C7C2AD-A1C6-425F-9E29-C505F914AD6C}]
2006-12-30 16:10:26 1220 658 Agent *************
2006-12-30 16:10:26 1220 658 Agent ** START ** Agent: Installing updates
[CallerId = AutomaticUpdates]
2006-12-30 16:10:26 1220 658 Agent *********
2006-12-30 16:10:26 1220 658 Agent * Updates to install = 1
2006-12-30 16:10:26 1220 658 Agent * Title = <NULL>
2006-12-30 16:10:26 1220 658 Agent * UpdateId =
{B166A6A9-398B-4C81-B8DB-2043CF0672A1}.103
2006-12-30 16:10:26 1220 658 Agent * Bundles 1 updates:
2006-12-30 16:10:26 1220 658 Agent *
{F2FCA9BF-05AD-460A-977C-355CE5734118}.102
2006-12-30 16:10:27 1220 658 EEHndlr FATAL: MSI DLL version is 3.0. Version
3.1 is required.
2006-12-30 16:10:27 1220 658 Agent WARNING: Failed to evaluate Installable
rule, updateId = {81C45F05-5B72-433E-BDB8-18E511CBF465}.102, error =
0x80241001
2006-12-30 16:10:27 1220 658 EEHndlr FATAL: MSI DLL version is 3.0. Version
3.1 is required.
2006-12-30 16:10:27 1220 658 Agent WARNING: Failed to evaluate Installed
rule, updateId = {8C3FCC84-7410-4A95-8B89-A166A0190486}.104, error =
0x80241001
2006-12-30 16:10:28 1220 658 EEHndlr FATAL: MSI DLL version is 3.0. Version
3.1 is required.
2006-12-30 16:10:28 1220 658 Agent WARNING: Failed to evaluate Installable
rule, updateId = {4A7CC0C1-CA9E-4A29-9E0F-D54EB640C4B6}.102, error =
0x80241001
2006-12-30 16:10:31 1220 650 AU AU setting client response for sessionId 0x0
to 'Active'
2006-12-30 16:10:32 1220 658 Handler Attempting to create remote handler
process as HP\Paul in session 0
2006-12-30 16:10:32 1220 658 DnldMgr Preparing update for install, updateId
= {F2FCA9BF-05AD-460A-977C-355CE5734118}.102.
2006-12-30 16:10:32 3732 eb4 Misc =========== Logging initialized (build:
5.8.0.2469, tz: +0100) ===========
2006-12-30 16:10:32 3732 eb4 Misc = Process:
C:\WINDOWS\system32\wuauclt.exe
2006-12-30 16:10:32 3732 eb4 Misc = Module:
C:\WINDOWS\system32\wuaueng.dll
2006-12-30 16:10:32 3732 eb4 Handler :::::::::::::
2006-12-30 16:10:32 3732 eb4 Handler :: START :: Handler: Windows Patch
Install
2006-12-30 16:10:32 3732 eb4 Handler :::::::::
2006-12-30 16:10:32 3732 eb4 Handler : Updates to install = 1
2006-12-30 16:10:32 3732 eb4 Handler : Installing update
{F2FCA9BF-05AD-460A-977C-355CE5734118}.102
2006-12-30 16:10:32 3732 eb8 Handler Installing with parameters=/norestart
/quiet -er,
sandbox=C:\WINDOWS\SoftwareDistribution\Download\ad9c4c2a779933f83b51a49a2c88838d.
2006-12-30 16:11:08 3732 eb8 Handler Install completed with 0x80070005.
2006-12-30 16:11:08 3732 eb4 Handler FATAL: UH: 0x80070005:
InstallOrUninstallThread failed
2006-12-30 16:11:08 3732 eb4 Handler : WARNING: Install completed: result
type = 0x0, installer error = True, error = 0x80070005, disabled until
reboot = Yes, reboot required = No
2006-12-30 16:11:08 3732 eb4 Handler FATAL: UH: 0x8024200b:
HandleSingleUpdate failed
2006-12-30 16:11:08 3732 eb4 Handler :::::::::
2006-12-30 16:11:08 3732 eb4 Handler :: END :: Handler: Windows Patch
Install
2006-12-30 16:11:08 3732 eb4 Handler :::::::::::::
2006-12-30 16:11:08 1220 5a4 AU >>## RESUMED ## AU: Installing update
[UpdateId = {B166A6A9-398B-4C81-B8DB-2043CF0672A1}]
2006-12-30 16:11:08 1220 5a4 AU # WARNING: Install failed, error =
0x80070005
2006-12-30 16:11:08 1220 658 Agent *********
2006-12-30 16:11:08 1220 658 Agent ** END ** Agent: Installing updates
[CallerId = AutomaticUpdates]
2006-12-30 16:11:08 1220 658 Agent *************
2006-12-30 16:11:08 1220 5a4 AU # Install call complete for all calls,
reboot required = Yes
2006-12-30 16:11:08 1220 5a4 AU #########
2006-12-30 16:11:08 1220 5a4 AU ## END ## AU: Installing updates [CallId
= {09C7C2AD-A1C6-425F-9E29-C505F914AD6C}]
2006-12-30 16:11:08 1220 5a4 AU #############
2006-12-30 16:11:13 1220 658 Report REPORT EVENT:
{084C6437-B5B6-4995-85AC-23C482E8D7C5} 2006-12-30 16:11:08+0100 1 182 101
{B166A6A9-398B-4C81-B8DB-2043CF0672A1} 103 80070005 AutomaticUpdates Failure
Content Install Installation Failure: Windows failed to install the
following update with error 0x80070005: Microsoft Windows Installer 3.1.
2006-12-30 16:11:13 1220 658 Report REPORT EVENT:
{B008B2D6-8626-4FFE-AEE5-EA48B75832C0} 2006-12-30 16:11:08+0100 1 193 102
{00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Content
Install Restart Required: To complete the installation of the following
updates, the computer must be restarted. Until this computer has been
restarted, Windows cannot search for or download new updates: - Microsoft
Windows Installer 3.1
There is also a KB893808v2.log file, with some errors in it:
24.890: UpdateSpUpdSvcInf: Source [ProcessesToRunAfterReboot] section is
empty; nothing to do.
24.890: IsRebootRequiredForFileQueue: c:\windows\system32\msisip.dll was
no-delay replaced; reboot is required.
24.890: IsRebootRequiredForFileQueue:
c:\windows\system32\dllcache\msisip.dll was no-delay replaced; reboot is
required.
24.890: IsRebootRequiredForFileQueue: c:\windows\system32\msimsg.dll was
no-delay replaced; reboot is required.
24.890: IsRebootRequiredForFileQueue:
c:\windows\system32\dllcache\msimsg.dll was no-delay replaced; reboot is
required.
24.890: IsRebootRequiredForFileQueue: c:\windows\system32\msihnd.dll was
no-delay replaced; reboot is required.
24.890: IsRebootRequiredForFileQueue:
c:\windows\system32\dllcache\msihnd.dll was no-delay replaced; reboot is
required.
24.890: IsRebootRequiredForFileQueue: c:\windows\system32\msiexec.exe was
no-delay replaced; reboot is required.
24.890: IsRebootRequiredForFileQueue:
c:\windows\system32\dllcache\msiexec.exe was no-delay replaced; reboot is
required.
24.890: IsRebootRequiredForFileQueue: c:\windows\system32\msi.dll was
no-delay replaced; reboot is required.
24.890: IsRebootRequiredForFileQueue: c:\windows\system32\dllcache\msi.dll
was no-delay replaced; reboot is required.
24.890: DoInstallation: A reboot is required to complete the installation of
one or more files.
24.890: In Function SetVolatileFlag, line 11576, RegOpenKeyEx failed with
error 0x2
24.890: In Function SetVolatileFlag, line 11593, RegOpenKeyEx failed with
error 0x2
24.890: UpdateSpUpdSvcInf: Source
[ProcessesToRunAfterReboot.RebootNotRequired] section is empty; nothing to
do.
24.906: RebootNecessary = 1,WizardInput = 1 , DontReboot = 1, ForceRestart =
0
0.234:
================================================================================
0.250: 2006/12/30 15:37:06.671 (local)
0.250:
C:\WINDOWS\SoftwareDistribution\Download\ad9c4c2a779933f83b51a49a2c88838d\update\update.exe
(version 6.1.22.4)
0.265: Failed To Enable SE_SHUTDOWN_PRIVILEGE
0.296: Hotfix started with following command line: /norestart /quiet -er
/ParentInfo:1a0cbc1495385b48b961bbcfc21ec128
1.921: In Function TestVolatileFlag, line 11660, RegOpenKeyEx failed with
error 0x2
1.921: In Function TestVolatileFlag, line 11692, RegOpenKeyEx failed with
error 0x2
1.921: DoInstallation: CleanPFR failed: 0x2
1.953: SetProductTypes: InfProductBuildType=BuildType.IC
1.968: SetAltOsLoaderPath: No section uses DirId 65701; done.
2.000: DoInstallation: FetchSourceURL for
c:\windows\softwaredistribution\download\ad9c4c2a779933f83b51a49a2c88838d\update\update_wxp.inf
failed
2.000: CreateUninstall = 1,Directory =
C:\WINDOWS\$MSI31Uninstall_KB893803v2$
2.000: LoadFileQueues: UpdSpGetSourceFileLocation for halmacpi.dll failed:
0xe0000102
2.000: BuildCabinetManifest: update.url absent
2.000: Starting AnalyzeComponents
2.000: AnalyzePhaseZero used 0 ticks
2.000: No c:\windows\INF\updtblk.inf file.
2.000: SetupFindFirstLine in LoadExclusionList Failed with error: 0xe0000102
2.000: SetupFindFirstLine in LoadExclusionList Failed with error: 0xe0000102
8.921: Third Party Provider = Intel for
PCI\VEN_8086&DEV_244E&SUBSYS_00000000&REV_D3\3&11583659&0&F0
9.140: Third Party Provider = Intel for
PCI\VEN_8086&DEV_2580&SUBSYS_00000000&REV_0E\3&11583659&0&00
9.312: Third Party Provider = Intel for
PCI\VEN_8086&DEV_2581&SUBSYS_00000000&REV_0E\3&11583659&0&08
9.625: Third Party Provider = Intel for
PCI\VEN_8086&DEV_2640&SUBSYS_00000000&REV_03\3&11583659&0&F8
9.984: Third Party Provider = Intel for
PCI\VEN_8086&DEV_2651&SUBSYS_2A0A103C&REV_03\3&11583659&0&FA
10.359: Third Party Provider = Intel for
PCI\VEN_8086&DEV_2658&SUBSYS_2A0A103C&REV_03\3&11583659&0&E8
10.515: Third Party Provider = Intel for
PCI\VEN_8086&DEV_2659&SUBSYS_2A0A103C&REV_03\3&11583659&0&E9
10.671: Third Party Provider = Intel for
PCI\VEN_8086&DEV_265A&SUBSYS_2A0A103C&REV_03\3&11583659&0&EA
10.812: Third Party Provider = Intel for
PCI\VEN_8086&DEV_265B&SUBSYS_2A0A103C&REV_03\3&11583659&0&EB
11.031: Third Party Provider = Intel for
PCI\VEN_8086&DEV_265C&SUBSYS_2A0A103C&REV_03\3&11583659&0&EF
11.265: Third Party Provider = Intel for
PCI\VEN_8086&DEV_2660&SUBSYS_00000000&REV_03\3&11583659&0&E0
11.531: Third Party Provider = Intel for
PCI\VEN_8086&DEV_266A&SUBSYS_2A0A103C&REV_03\3&11583659&0&FB
11.718: Third Party Provider = Intel for
PCI\VEN_8086&DEV_266F&SUBSYS_2A0A103C&REV_03\3&11583659&0&F9
11.937: SetupVerifyInfFile failed with error 0x490 for oem28.inf of device
ROOT\ACRONISDEVICES\0001
15.453: SetupVerifyInfFile failed with error 0x490 for
c:\windows\inf\artec48.inf of device USB\VID_05D8&PID_4003\5&17AF0DAD&0&1
15.625: SetupVerifyInfFile failed with error 0x490 for
c:\windows\inf\artec48.inf of device USB\VID_05D8&PID_4003\5&2124D27&0&2
16.140: OEM file scan used 14140 ticks
Can anyone help? I hope I have attached enough information....
Many thanks,
Paul
- 7
- Windows XP Update >> Error OX80072EE7I need help? Everytime i try to check on updates it says ERROR OX80072EE7.
When you use the Microsoft Windows Update Web site, you may recieve one ot
the following error meassage.
ERROR OX80072EE2
ERROR OX80072EE7
ERROR OX80072EFD
ERROR OX80072F76
ERROR OX80072F78
Which i did, but have no clue to remove this. Help?
- 8
- 9
- Windows XP Network >> Help! My internet won't work!Hi, my computer has had an onslaught of spyware which I have removed but I
think that some spyware may have attached itself to an internet file that
communicated between my computer and the modem. I've called my isp numerous
times and they say everything with the service is fine it must be my
computer, I've even tried switching to a new isp but that didn't work either.
Everytime I turn my computer on and check task manager the System Idle thing
is at zero (with no programs running at all) but svchost is at 97 or so and
my cpu is constantly at 100%. I just dont get what's going on, if anyone has
any suggestions I would be grateful! And for anyone thats curious I'm typing
from my school computer. Thanks very much
- 10
- Windows XP Support >> No Start-upI have had a problem with starting my PC for some time. It normally took
10min. before I could bring up any files. To cure this problem it was
suggested that I reinstall Windows. I did that and the installation was
completed and then the computer would not start up further than the first
three pages. The Windows then proceeded to carry out repair job, which they
did and re installed themselves again, but the computer on start up will not
go further than the "XP Professional" page. What can I do to get the
computer start and proceed to open Desktop?
- 11
- Windows XP >> how do i restore my computerI want to completly clear my computer to get rid of all the programs and
files that i dnt use any more. I cant find the windows xp disk so is there a
program i can download to do this.
- 12
- Windows XP >> Msconfig QuestionI am trying to speed up boot time. WinXP Pro OEM installed a year ago.
Should I consider reinstall or just OS cleanup and tweet? I would like to
know if anyone could supply a link to a list of applications that can and
can not be removed from startup using MSCONFIG. I also would like to know
how I go about finding out what and why I have a box with check mark that
has no other information but points to
HKLM\Software\Microsoft\Windows\CurrentVersion\Run. Are there any utilities
that I could use to clean up and speed up boot time?
Thanks for any pointers.
Sam
- 13
- Windows XP MovieMaker >> Movie Maker problemsI am utterly disgusted with your product "Windows Movie Maker". I don't know,
neither do I care, what version it is. It came with XP Home I purchased this
year. After encountering extreme problems which had me reboot, lose projects,
system crashes etc. I refuse to be polite to whoever is responsible for
creating this software.
Whenever I try to open a project, the process of "checking project files"
either takes incredibly long (I'm talking about hours) or freezes.
When I import movies, it freezes.
When I save movies, it freezes or shuts down.
Every click and every step takes 10 seconds on average before the click
results in something, and by something, I also mean crashes.
When playing the time line, it lags and screws up the synchronization of
audio and video.
Frames are skipped or freeze.
Sometimes it just shuts down.
When previewing clips, the player turns black.
And NO, I am not going to reduce quality or remove effects. I demand
perfection from what I spent money on. I don't spend hours or, due to the
"speed" of this program, entire nights, making a video just to reduce it to
mediocre Youtube material. Fix it or refund my purchase of this horrible OS.
Oh btw, the "opening project files" advanced by an amazing 5% since I
accessed this newsgroup. How big is the project you ask? Hmm, by now it's 1
minute and 40 seconds. Ever since opening the project, more than an hour has
passed and only half of the checking process has finished so far.
- 14
- 15
- Windows XP Setup >> Re-naming primary partitionI've just done a clean re-install of WinXP Home and have finished up with my
primary disc, windows programme disc, as drive D. which I don't want but am
a bit reluctant to mess with.
I have a sata 200 Gb drive which was formatted into two halves. Drive c was
windows and other programmes, drive d was data files. I had problems with
NVIDIA drivers which wouldn't go away so I zapped drive c , reformatted it
and re-installed winXP. When the dust settled it finished up as drive d and
the old drive d, data disc, is now drive c. This may or may not cause
confusion in the future since many applications assume that Drive c is the
root drive.
I don't know this but I assume that when windows installed, it hard coded
the path of all its constituent parts in the registry to drive d and this
would cause me much grief if I just renamed the two partitions.
I am not keen to start from scratch and reformat both partitions and
re-install Windows again so can anybody give me a steer on what the best way
forward might be.
Many thanks.
|
|
|