| Athlon 2500 + Processor & NF7-S V2.0 MB |
|
 |
Index ‹ Windows XP ‹ Windows XP Hardware
|
- Previous
- 1
- Windows XP Setup >> New Hardware detected at startup???On Win XP SP2, IE SP2
I am on dial-up only and confirmed in Control Panel/
Network Connections.
On bootup I get popup that new hardware is detected.
Checking Device Manager, highlighted is "Other devices"
"Ethernet Controller". I don't want this hardware and in
Device Manager have Disabled and Uninstalled. But on
reboot it is back.
How do I get rid of this Ethernet Controller?
-
pappy
- 2
- Windows XP >> Unable to create a Network Setup DiskThe Network Wizard gives me the following error message 'The wizard has
detected that this computer has no floppy disk drives or other removeable
media. You need such a device to create a Network setup Disk'
However I have recently installed a DVD/CD writer (Philips DVDR1648K/00) as
a slave to an existing DVD ROM which normally works fine. I've checked the
driver etc... If I view via 'My Computer' it states that a DVD-RW Drive is
installed, in properties it has a 'recording tab' although the 'hardware tab'
only lists the manufacturer as (Standard CD-ROM drives). If I cannot sort
this is there a way of creating a Disc without the Wizard ?
- 3
- Windows XP Support >> Boot Software in XPI have WIN XP Pro and I would like for my computer to boot up a cash register
program when the computer is started. Is this possible with XP Pro or do I
need additional software. I need continous connectivity to the Internet for
the credit card software.
- 4
- Windows XP Support >> can't install fax--file copy errorI had this file copy error before when I tried overinstalling xp and
everyone said it's a hardware problem. But then I reformatted and did a
clean install and everything was ok, and I could overinstall after that. So
it's apparently a software problem. I'm just giving this background info so
no one jumps to the conclusion that it's a hardware problem. Well, I tried
adding the fax software from Add/Remove Windows components and it prompted
for the disk. I put in the disk and it went to the i386 folder but gave a
file copy error. I extracted the files to my hard disk with Winzip but still
not able to copy. How do I figure what's causing it?
- 5
- Windows XP Network >> 2nd hard drive gone missingI have had 2 hard drives in my pc for quite a while now,
c: and f:, however f: no longer shows up in windows
explorer, it shows in bios and in device manager, however
if you click on properties > volumes tab and populate it
says it is unknown, unreadable and 0mg capacity, any help
on this would be great as i have lots of my files there
Thanks in advance
- 6
- Windows XP >> Registry ?I have a virus , cant find it to get rid of it ! virus
scans says no virus found ( I'm sending thousands and
thousands of email, I have a virus )some of the research
talks about registry key values being changed , I've
looked at these but how do I know what is suppose to be
there !should there be any numbers,*, %,s at all
following these ?
HKEY_LOCAL_MACHINE\software\classes\exefile
\regfile
\scrfile
\batfile
\piffile
Its hard to look in your registry for added or modified
registry keys when you dont know what is normal !...Robin
- 7
- 8
- Windows XP Update >> spyware/adware removal.hi. i am looking for a free spyware/adware removal tool. i have used the
free scans you can get when you search google. but they only scan. when my
system does an automatic scan, it comes up with ever increasing
adware/spyware found. i try to delete but not happening. have deleted
cookies and temporary internet files. anybody out there with any ideas would
be gratefully acknowledged. thanks
--
sam.fos
- 9
- Windows XP >> Adobe Reader Error MessageHi there,
I've been having problems with my Windows. When I am on the internet and I
click on a link which should open a pdf file or similar. I get the following
Adobe Reader Message: The Image Viewer plugin has been disabled because
Escript plugin is missing. Anyone know how I can fix?
Thanks
- 10
- Windows XP Perform Maintain >> Help with random crashesHi, recently my PC has started to randomly crash, often when playin
games or listening to music. However, this also happens when I leav
my PC to go to the loo... I come back and it has restarted
In the event viewer it says this (this differs a lot, here's what
had last time)
error code 100000d1, parameter1 04f35fc8, parameter2 00000002
parameter3 00000001, parameter4 f94d57c5
Any Ideas? I had a case fan not working, I've replaced that and it ha
crashed once since then. Someone mentioned something about VIA,
don't know what this is but I have installed some program to do wit
it called VIA hyperion
I've also disabled automatic restarts, so hopefully next time i
crasjes I will get a helpful BSOD screen. Any useful info anyone
- 11
- Windows XP Setup >> Windows XP Licensing QuestionWhat's the big difference between the full versions at the top of this list,
and the OEM versions at the bottom:
http://www.pricegrabber.com/search_getprod.php/masterid=508417
http://tinyurl.com/6mztr
I have a computer running Windows XP with a illegal Product Activation Code.
If I purchase a Windows XP OEM version, will the code with it always work
with my puter?
Or do I need to make sure it has an OEM version of XP installed first,
before ordering an OEM CD and license and it being not what I need?
--
bill evans
WHEvansIIINO@SPAMcharter.net
Hartselle, AL
Freeman Dyson: "It's best not to limit our thinking. We can always
air-condition the Earth."
- 12
- Windows XP Network >> domainhi can anyone tell me if its possible in windows xp
network to create domain?
I have 2 computers one with windows xp pro and second
with windows xp home edition
all I want to do is to have one user account for the same
person on two computers and to remember changes I have
made on first comp when I log on two second comp
- 13
- Windows XP Security >> Similar to User Accounts Post below.I have a similar issue to rocknroll's post from 3-9. We purchased a cheaper
computer for our 5 year old son that included XP Home edition. He somehow
got into the controll pannel and assigned a password to the XP Welcome screen
and has no idea what he entered in there. I am trying to get by the password
screen.
I have tried to get to the safe mode but for some reason the F8 key does not
work during the boot sequence. I have tried to restore the machine to a
previous date but the F11 key does not work. I had to replace the standard
connection keyboard with a USB keyboard because there is an issue with the
standard keyboard port.
This machine has very little data on it and I would be willing to reinstall
all the programs in order to get by the welcome screen. Any help would be
appreciated.
- 14
- Windows XP Hardware >> Wireless ConnectionI'm using Xp professional and my computer locks up when
installing a wireless pmcia card. I do not have the
wireless connection in the network connection folder ...
am I missing something?
- 15
- Windows XP >> Make drive contents privateI'm running XP Pro. I have about 5 physical drives on the machine, one
of them with work files which I want to protect completely from the kids
playing games. All the drives are formatted with NTFS.
I went to Explorer / Tools / Folder Options / View and unchecked
"Use simple file sharing", however the option to set the drive private
is still disabled. How do I do this for the entire contents of a drive?
|
| Author |
Message |
Curt
|
 Posted: Sat Jun 05 21:57:45 CDT 2004 |
Top |
Windows XP Hardware >> Athlon 2500 + Processor & NF7-S V2.0 MB
I have flashed my BIOS to newest version. I have made some adjustments in
BIOS to CPU to get rid of RAM errors etc.
I just downloaded an update for SATA from MS for my RAID controller. There
is also an update for processor AMD K7 that I have not yet loaded. I do
have Athlon 2500 + and in RAID BIOS utility the BIOS & CPU are listed as
unknown.
Does the AMD K7 processor update apply to my Athlon 2500 + Barton?
Also I noticed that whey I restart XP Professional the general system
properties screen says Athlon (tm) XP--when I shut down the PC completely &
then boot back into XP the same screen will sometimes show only Athlon (tm)
without the XP? This is one reason why I was wondering if I needed the
update for the processor.
Any info would really be appreciated!
Windows XP322
|
| |
|
| |
|
Kevin
|
| Posted: Sat Jun 05 21:57:45 CDT 2004 |
Top |
Windows XP Hardware >> Athlon 2500 + Processor & NF7-S V2.0 MB
Isn't the K7 processor about 5 years old by now?
"Lori Kuiper" <EMail@HideDomain.com> wrote in message
news:EMail@HideDomain.com...
> I have flashed my BIOS to newest version. I have made some adjustments in
> BIOS to CPU to get rid of RAM errors etc.
>
> I just downloaded an update for SATA from MS for my RAID controller.
There
> is also an update for processor AMD K7 that I have not yet loaded. I do
> have Athlon 2500 + and in RAID BIOS utility the BIOS & CPU are listed as
> unknown.
>
> Does the AMD K7 processor update apply to my Athlon 2500 + Barton?
>
> Also I noticed that whey I restart XP Professional the general system
> properties screen says Athlon (tm) XP--when I shut down the PC completely
&
> then boot back into XP the same screen will sometimes show only Athlon
(tm)
> without the XP? This is one reason why I was wondering if I needed the
> update for the processor.
>
> Any info would really be appreciated!
>
>
|
| |
|
| |
|
Lori
|
| Posted: Sat Jun 05 22:35:32 CDT 2004 |
Top |
Windows XP Hardware >> Athlon 2500 + Processor & NF7-S V2.0 MB
I don't know. All I know is that it comes up as an update for Windows XP.
The date listed on the update is December of 2002.
The processor file that XP is using now is dated 7/2001. So it looks like
the Dec one would be newer if it supports the Athlon 2500+
"Kevin" <EMail@HideDomain.com> wrote in message
news:%EMail@HideDomain.com...
> Isn't the K7 processor about 5 years old by now?
>
> "Lori Kuiper" <EMail@HideDomain.com> wrote in message
> news:EMail@HideDomain.com...
> > I have flashed my BIOS to newest version. I have made some adjustments
in
> > BIOS to CPU to get rid of RAM errors etc.
> >
> > I just downloaded an update for SATA from MS for my RAID controller.
> There
> > is also an update for processor AMD K7 that I have not yet loaded. I do
> > have Athlon 2500 + and in RAID BIOS utility the BIOS & CPU are listed as
> > unknown.
> >
> > Does the AMD K7 processor update apply to my Athlon 2500 + Barton?
> >
> > Also I noticed that whey I restart XP Professional the general system
> > properties screen says Athlon (tm) XP--when I shut down the PC
completely
> &
> > then boot back into XP the same screen will sometimes show only Athlon
> (tm)
> > without the XP? This is one reason why I was wondering if I needed the
> > update for the processor.
> >
> > Any info would really be appreciated!
> >
> >
>
>
|
| |
|
| |
|
neil
|
| Posted: Sun Jun 06 04:32:19 CDT 2004 |
Top |
Windows XP Hardware >> Athlon 2500 + Processor & NF7-S V2.0 MB
I have a Athlon XP 2600+ and pondered on the same question for a while. I
decided to try it out after making a restore point, it didn't seem to make
any difference apart from removing it from the windows update list.....
With regard to your SATA RAID I personally would only use device drivers
found on the manufacturers website & not MS. MS are likely to be generic and
not specific to the manufacturer you have and sometimes to more harm than
good.
Hope that helps
All the best
Neil
"Lori Kuiper" <EMail@HideDomain.com> wrote in message
news:EMail@HideDomain.com...
> I have flashed my BIOS to newest version. I have made some adjustments in
> BIOS to CPU to get rid of RAM errors etc.
>
> I just downloaded an update for SATA from MS for my RAID controller.
There
> is also an update for processor AMD K7 that I have not yet loaded. I do
> have Athlon 2500 + and in RAID BIOS utility the BIOS & CPU are listed as
> unknown.
>
> Does the AMD K7 processor update apply to my Athlon 2500 + Barton?
>
> Also I noticed that whey I restart XP Professional the general system
> properties screen says Athlon (tm) XP--when I shut down the PC completely
&
> then boot back into XP the same screen will sometimes show only Athlon
(tm)
> without the XP? This is one reason why I was wondering if I needed the
> update for the processor.
>
> Any info would really be appreciated!
>
>
|
| |
|
| |
|
Andrew
|
| Posted: Sun Jun 06 10:33:46 CDT 2004 |
Top |
Windows XP Hardware >> Athlon 2500 + Processor & NF7-S V2.0 MB
You're probably thinking of the K6 line, which was a competitor to Pentium II and early Pentium
IIIs. The K7 is Athlon/Athlon XP, K8 refers to the Athlon 64 generation.
Lori, is this update you're talking about on Windows Update or some other website?
Andrew
"Kevin" <EMail@HideDomain.com> wrote in message news:%EMail@HideDomain.com...
> Isn't the K7 processor about 5 years old by now?
>
> "Lori Kuiper" <EMail@HideDomain.com> wrote in message
> news:EMail@HideDomain.com...
>
> > I have flashed my BIOS to newest version. I have made some adjustments in
> > BIOS to CPU to get rid of RAM errors etc.
> >
> > I just downloaded an update for SATA from MS for my RAID controller.
> > There
> > is also an update for processor AMD K7 that I have not yet loaded. I do
> > have Athlon 2500 + and in RAID BIOS utility the BIOS & CPU are listed as
> > unknown.
> >
> > Does the AMD K7 processor update apply to my Athlon 2500 + Barton?
> >
> > Also I noticed that whey I restart XP Professional the general system
> > properties screen says Athlon (tm) XP--when I shut down the PC completely
> > &
> > then boot back into XP the same screen will sometimes show only Athlon
> > (tm)
> > without the XP? This is one reason why I was wondering if I needed the
> > update for the processor.
> >
> > Any info would really be appreciated!
|
| |
|
| |
|
Lori
|
| Posted: Sun Jun 06 16:56:07 CDT 2004 |
Top |
Windows XP Hardware >> Athlon 2500 + Processor & NF7-S V2.0 MB
The driver update is on the Windows Update site. From the date, it does
seem to be newer than the one currently used by Windows. I guess I can make
a restore point and go back to that if it does not work well, considering
that another user with a similar processor did apply the update and it has
not caused any trouble.
"Andrew McDonald" <EMail@HideDomain.com> wrote in
message news:EMail@HideDomain.com...
> You're probably thinking of the K6 line, which was a competitor to Pentium
II and early Pentium
> IIIs. The K7 is Athlon/Athlon XP, K8 refers to the Athlon 64 generation.
>
> Lori, is this update you're talking about on Windows Update or some other
website?
>
> Andrew
>
> "Kevin" <EMail@HideDomain.com> wrote in message
news:%EMail@HideDomain.com...
>
> > Isn't the K7 processor about 5 years old by now?
> >
> > "Lori Kuiper" <EMail@HideDomain.com> wrote in message
> > news:EMail@HideDomain.com...
> >
> > > I have flashed my BIOS to newest version. I have made some
adjustments in
> > > BIOS to CPU to get rid of RAM errors etc.
> > >
> > > I just downloaded an update for SATA from MS for my RAID controller.
> > > There
> > > is also an update for processor AMD K7 that I have not yet loaded. I
do
> > > have Athlon 2500 + and in RAID BIOS utility the BIOS & CPU are listed
as
> > > unknown.
> > >
> > > Does the AMD K7 processor update apply to my Athlon 2500 + Barton?
> > >
> > > Also I noticed that whey I restart XP Professional the general system
> > > properties screen says Athlon (tm) XP--when I shut down the PC
completely
> > > &
> > > then boot back into XP the same screen will sometimes show only Athlon
> > > (tm)
> > > without the XP? This is one reason why I was wondering if I needed
the
> > > update for the processor.
> > >
> > > Any info would really be appreciated!
>
>
|
| |
|
| |
|
Lori
|
| Posted: Sun Jun 06 17:00:37 CDT 2004 |
Top |
Windows XP Hardware >> Athlon 2500 + Processor & NF7-S V2.0 MB
Thanks for the info. I will watch it more carefully from now on--the update
did list the manufacturers name in it, so hopefully it will not cause any
trouble.
I have not hooked up another drive yet, so I haven't setup an array. At
this time, I only have access to RAID when my PC starts up--I did not
install the software GUI in XP.
Is it necessary to install the XP software for RAID or is it just as good to
not install it and just access thru F4 at startup? I didn't want to install
any software that was not absolutely necessary and I am not yet very
familiar with RAID.
"neil" <neilp67@hotmaildotcom (replace dot with .)> wrote in message
news:voCwc.561$RP3.523@newsfe1-win...
> I have a Athlon XP 2600+ and pondered on the same question for a while. I
> decided to try it out after making a restore point, it didn't seem to make
> any difference apart from removing it from the windows update list.....
>
> With regard to your SATA RAID I personally would only use device drivers
> found on the manufacturers website & not MS. MS are likely to be generic
and
> not specific to the manufacturer you have and sometimes to more harm than
> good.
>
> Hope that helps
> All the best
> Neil
> "Lori Kuiper" <EMail@HideDomain.com> wrote in message
> news:EMail@HideDomain.com...
> > I have flashed my BIOS to newest version. I have made some adjustments
in
> > BIOS to CPU to get rid of RAM errors etc.
> >
> > I just downloaded an update for SATA from MS for my RAID controller.
> There
> > is also an update for processor AMD K7 that I have not yet loaded. I do
> > have Athlon 2500 + and in RAID BIOS utility the BIOS & CPU are listed as
> > unknown.
> >
> > Does the AMD K7 processor update apply to my Athlon 2500 + Barton?
> >
> > Also I noticed that whey I restart XP Professional the general system
> > properties screen says Athlon (tm) XP--when I shut down the PC
completely
> &
> > then boot back into XP the same screen will sometimes show only Athlon
> (tm)
> > without the XP? This is one reason why I was wondering if I needed the
> > update for the processor.
> >
> > Any info would really be appreciated!
> >
> >
>
|
| |
|
| |
|
neil
|
| Posted: Sun Jun 06 17:16:01 CDT 2004 |
Top |
Windows XP Hardware >> Athlon 2500 + Processor & NF7-S V2.0 MB
Just F4 at start-up will do, the windows GUI program just lets you look at
the way the RAID is set-up.
I'm not sure you would need that once the config is up and running.
all the best
Neil
"Lori Kuiper" <EMail@HideDomain.com> wrote in message
news:%23K%EMail@HideDomain.com...
> Thanks for the info. I will watch it more carefully from now on--the
update
> did list the manufacturers name in it, so hopefully it will not cause any
> trouble.
>
> I have not hooked up another drive yet, so I haven't setup an array. At
> this time, I only have access to RAID when my PC starts up--I did not
> install the software GUI in XP.
>
> Is it necessary to install the XP software for RAID or is it just as good
to
> not install it and just access thru F4 at startup? I didn't want to
install
> any software that was not absolutely necessary and I am not yet very
> familiar with RAID.
> "neil" <neilp67@hotmaildotcom (replace dot with .)> wrote in message
> news:voCwc.561$RP3.523@newsfe1-win...
> > I have a Athlon XP 2600+ and pondered on the same question for a while.
I
> > decided to try it out after making a restore point, it didn't seem to
make
> > any difference apart from removing it from the windows update list.....
> >
> > With regard to your SATA RAID I personally would only use device drivers
> > found on the manufacturers website & not MS. MS are likely to be generic
> and
> > not specific to the manufacturer you have and sometimes to more harm
than
> > good.
> >
> > Hope that helps
> > All the best
> > Neil
> > "Lori Kuiper" <EMail@HideDomain.com> wrote in message
> > news:EMail@HideDomain.com...
> > > I have flashed my BIOS to newest version. I have made some
adjustments
> in
> > > BIOS to CPU to get rid of RAM errors etc.
> > >
> > > I just downloaded an update for SATA from MS for my RAID controller.
> > There
> > > is also an update for processor AMD K7 that I have not yet loaded. I
do
> > > have Athlon 2500 + and in RAID BIOS utility the BIOS & CPU are listed
as
> > > unknown.
> > >
> > > Does the AMD K7 processor update apply to my Athlon 2500 + Barton?
> > >
> > > Also I noticed that whey I restart XP Professional the general system
> > > properties screen says Athlon (tm) XP--when I shut down the PC
> completely
> > &
> > > then boot back into XP the same screen will sometimes show only Athlon
> > (tm)
> > > without the XP? This is one reason why I was wondering if I needed
the
> > > update for the processor.
> > >
> > > Any info would really be appreciated!
> > >
> > >
> >
>
>
|
| |
|
| |
|
| |
|
Index ‹ Windows XP ‹ Windows XP Hardware |
- Next
- 1
- Windows XP >> Chkdsk errorWhen I try to run chkdsk I receive the following error:
chdsk.exe - Unable to Locate Component
This application has failed to start because ulib.dll was
not found. Re-installing application might fix this issue.
Any ideas what might cause this or repair suggestions?
Thanks,
- 2
- Windows XP Setup >> Backup is way too hugeHey Guys,
I have a external HD of 80G. Less than 10G is being utilized. When I try to
back it up, it tells me that the backup is too big for the volume. What is
making it so huge?
When I backup my C drive - 24G in a 60G HD - I get the same message. It says
the backup is 48+G, which it cannot handle. I'm sure I'm doing something
wrong but can't seem to figure out what it is.
Thaks for any help
Holly
- 3
- Windows XP Security >> run script syncronouslyI have a Win2000 domain with XP Pro clients and because of
a security program - appsense - need to run scripts before
explorer as appsense will not permit the programs to run
once the user has logged on.
The settings are all configured in the Win2000 active
directory policy for the users but are inneffective on XP
clients which respond only, it seems, to 2003 Server(which
we would be ill advised to install at this point in time)
Please can you help
- 4
- Windows XP >> Problem: Files have become foldersI had a small problem with my hard drive and all the files have been copied
to a new drive. Now I find some of the files have become folders. I cannot
copy them or delete them. I get a message "The directory name is invalid".
So now I have lost my data. These folders are stuck there and won't move.
How can I tell them they are files or at least delete them?
- 5
- Windows XP >> Transfer files between usersHow do you transfer files between different users in same
computer.
My Daughter has a file on desktop call unused desktop
items and she is the only one to access it how can I get
it to somewhere we can all use it. It is music files
- 6
- 7
- Windows XP >> I.E.6.xxx PRIVACY OPTIONHi, WIN XP HOME
I go to IE 6.xxx, then to INTERNET OPTIONS, click on PRIVACY, and
set it to DEFAULT.
It absolutely refuses to hold as such, but reverts to CUSTOM every
time. This happens even when I don't restart and during the same
session.
Help please?
ThanX
Mike
This whole ciuntry is filled with apathy; but who cares anyway!
- 8
- Windows XP Support >> How to solve "Unlock Computer" problemI'm running 3 Windows XP Pro computers in a home/office environment. Two of
the systems (B and C) are in another area for the office so I usually access
them via Remote Desktop.
Occasionally one of these systems (computer B) will display a dialog box
with the title Unlock Computer. Inside the box it says "This computer is in
use and has been locked" It shows the user name and a blank window for the
PW which I must enter.
This only happens on this one computer. What's the cause and how do I
correct it? Suggestions greatly appreciated.
Note - I'm the only person using all computers.
Jim
- 9
- Windows XP Update >> Error number: 0x8DDD0009Running MS Update. After a long time scanning I get this message:
Error number: 0x8DDD0009]
The website has encountered a problem and cannot display the page you are
trying to view. Take the following steps to try solving the problem:
Refresh the page.
In Internet Explorer, delete your Temporary Internet Files by going to the
Tools menu and clicking Internet Options.
Close and then re-open Internet Explorer.
If these steps donâ??t work, try visiting the site later or using the
resources provided below.
For self-help options:
Frequently Asked Questions
Find Solutions
Windows Update Newsgroup
For assisted support options:
Microsoft Online Assisted Support (no-cost for update-related issues)
I have cleared temp files as instructed and run MS Update again with the
same results. Running XP with SP2.
- 10
- Windows XP >> can only start in safe modeI can only startup in safe mode with networking, black screen. It has done
this before than all of a sudden it just starts normally with xp. This time
it has been in safe mode for several days. any suggestions
--
Rod
- 11
- Windows XP Support >> Outlook Express Wizard, or Manual Transfer?Has anyone used this, and any comments?:
http://www.outlook-express-backup.com/index.html
I sort of hate to use something (if only once) that I am not going to buy
for continued use.
Or, should I go here?
http://www.insideoutlookexpress.com/backup/clone.htm
I'm doing a clean install (repartition, etc.) of XPHome from Dell's
reinstall CD on my laptop. My OE has only one identity. If I use the
instructions at insideoutlookexpress, I would make the backup on the
laptop's drive, and then copy to a USB external drive, wipe the laptop
drive, reinstall XP on the laptop drive, and then move the outlook
express backup back from the USB external drive to the laptop.
In the past, I've just saved out (exported) the dbx and address book,
then moved back to the reinstalled Outlook Express on the laptop.
I'm doing this for my daughter, and I don't want to mess up.
Thanks,
Bruce
- 12
- Windows XP Setup >> Formatting drive before upgrading to XP ProMy Win98 PC has virus "issues" and I would like to
completely format my drive before upgrading to XP Pro.
How can I do this? I run through the XP "new install"
option when installing XP but when it's done I still have
files/folders left over from my previous Win98
installation. I want to completely erase everything from
this drive so I have a fresh starting point for XP.
I don't know how to reformat a drive?
If I do, will my CD drive recognize the XP disk or do I
need to worry about copying CD drivers?
- 13
- Windows XP Hardware >> Will XP install with no problems on this system?I am using XP home on my HP 2.8 gig notebook but I want to upgrade or
do a fresh install of my desktop system. It consists of and Asus
A7N8X-deluxe motherboard, AMD XP 3200+ 400fsb CPU, ATI Radeon 9800 pro, 256
meg videocard.
Does XP have the nforce chipset drivers etc? Or will I need to keep the
driver disks handy? Should I use XP home or Pro?
Thank you.
--
.
- 14
- customize >> Tomorrow's XP General Chat - Welcome to the world of Windows Vista!WHAT: Windows XP ExpertZone Technical Chat
WHEN: Jan 30, 2007 10am-11am PST
WHERE: http://www.microsoft.com/windowsxp/expertzone/chats/chatroom.aspx
Tomorrow we will be holding an ExpertZone Chat for Windows XP, and we'll
start talking about Windows Vista!
This is a great opportunity to learn a bit about Windows Vista from
Microsoft Employees.
Got a task you're trying to figure out in Windows Vista? Let us share with
you how to do it.
Got a problem in Windows Vista? Let us help you with troubleshooting.
Still on the fence on whether to make the move to Vista? This will be a
great opportunity for you to ask questions in order to make your decision!
As with all Windows XP General chats, we will still take any questions and
issues you have with Windows XP. There's just some bonus material in
tomrorow's chat about Windows Vista! ;-)
We will hope you will join us!
--
Lance Zielinski
Microsoft Corporation
This posting is provided "AS IS" with no warranties,
and confers no rights.
====================================================
When responding to posts, please "Reply to Group"
via your newsreader so that others may learn and
benefit from your issue.
====================================================
- 15
- Windows XP >> WINDOWS XP INSTALLATION QUESTIONI currently have windows me installed in my pc.i recently
purchased a full install version of windows xp and am
trying to find information on how to install it in my
computer without having to format my hard drive.i cant
find any info on the windows knowledge base or elsewhere
on this subject. any help would be appreciated. thanks.
|
|
|