 |
|
Index ‹ Windows XP ‹ Windows XP Security
|
- Previous
- 1
- Windows XP Setup >> Windows XP Setup FreezeI have recently changed the motherboard in one of my computer systems at my
workplace. The machines in the office all use identical components, accept
the new motherboard. This of course required me to reinstall windows because
it was a substantial hardware change. The computer boots from the Windows CD,
inspects the hardware, enters setup and begins loading the drivers. Then
before it even gets to the screen where it asks if you want to recover or
install windows, it locks up. Right when it says "SEtup is Starting Windows".
The first time i booted from the CD it got past this point and it allowed me
to format the drive and then reboot, which would then allow me to install
windows. Since then it has locked up everytime. I have tried swapping out
hard drives, the CD-ROM drive, and just about evetything else accept the CPU.
I even tried to run setup with the same CD on several other computers, and it
worked everytime on those. What could be the cause of this problem? I am at a
complete loss as I have been working on this for days.
- 2
- Windows XP Network >> Can't browse yo my other PCs after a network changeHistory: I hav a home network setup with 5 or so computers. All are running
XP Pro with one laptop running VIsta Home. I have them all setup on the same
Workgroup and have always been able to browse around to the folders I have
shared with no trouble.
Cause: Last weekend my main router died so I replaced it. THe new router
used a different IP set then my old one so now everything has a new IP
address. Everything else is the same.
Problem: One of the PCs cannot browse to any of the others and none of them
can browse to it. I can go to DOS and ping the other PCs by name or by IP,
but when I try to do a \\name\share or \\IP\share to view it, I get the No
such PC error. Also when I go into the network neighborhood, entire network,
workgroup, it hangs for a long time and eventually comes back showing nothing.
I can't figure out what is causing this and am out of ideas. Can anyone
shed some light on this for me? Others have told me I'm screwed unless I
rebuild (which I don't want to do) but there has to be some sort of solution.
If you need more info, let me know.
Thanks!!
- 3
- 4
- Windows XP Network >> XP looses network settingsNew Dell w/XP Home edition . Installed Linksys wireless
adapter to add to the aol braodband and home network.
Been able to set up the wireless adapter for aol, but
loose the settings once the computer is turned off( have
to reset each time). The second computer on the home
network runs W/98 and cannot see the XP files but XP can
see W/98 files/printers. TRULY STUMPED HELP!
- 5
- Windows XP >> Windows Picture and Fax Viewer problemWhen tryign to open images using the built in 'Windows Picture and Fax
Viewer' I receive the following error:
Windows cannot find 'C:\My Images.jpg'. Make sure you typed the name
correctly and then try again. To search for a file, click the Start button,
and then click Search.
Any ideas on how to resolve this? I've gone into the file associations and
associated jpg image to another program, then back to the viewer and it
still gives me the error. This just started happeneing yesterday.
--
Posted 'as is'. If there are any spelling and/or grammar mistakes, they
were a direct result of my fingers and brain not being synchronized or my
lack of caffeine.
Mike Brearley
- 6
- Windows XP Support >> XP Home asking for Password when accessing shared directoriesMy XP Home computer just started asking for authentication when I access the
pc from my XP Pro Laptop.
It is asking for a password for the user Guest/<computer name>
This never happend before I now cannot access the shared printer on the XP
Home system.
can anyone point me in the right direction to start looking for what could
have changed
- 7
- Windows XP Hardware >> xp locks up when hp scanjet 6300c is turned onWindows XP pro locks up (freezes) when I turn on my
hp6300c flatbed scanner.
This scanner has been working fine for over a year, and no
Windows XP claims that the drivers are not approved?
Anyone with the same problem, and possible solutions?
I went to HP and downloaded their XP drivers, but they
will not work either.
Thanks
Walter
- 8
- 9
- Windows XP >> time stamps on floppy drive files...The modified times on my files change when I copy them
from the hard drive to the floppy using the xcopy command
in a batch program. The times are about 2 seconds later
on the floppy drive than they were on the hard drive.
This creates havoc with file backup schemes. The files
in my destination drive(floppy drive) now appear to have
been modified at a later time than the files in my source
drive(hard drive) from which I copied them. I need the
files in my destination drive to be in synch, to the
second, with the files in my source drive.
Any ideas on a fix or a workaround will be most helpful.
- 10
- Windows XP Support >> WINDOWS VISTA FINAL, OFFICE 2007 ENTERPRISE, ARCSOFT SHOWBIZ DVD V2.2.2.78, MITCHELL GLASSMATE V5.2, other 2006-11-19 new programs CDs 5181 - 5199, and new games CDs 1941 - 1944WINDOWS VISTA FINAL, OFFICE 2007 ENTERPRISE, ARCSOFT SHOWBIZ DVD
V2.2.2.78, MITCHELL GLASSMATE V5.2, other 2006-11-19 new programs CDs
5181 - 5199, and new games CDs 1941 - 1944
new programs
Nr=5199 MICROSOFT OFFICE 2007 ENTERPRISE (OFFICE-SOLUTION)
Nr=5198 MICROSOFT WINDOWS VISTA FINAL (OPERATING SYSTEM) 1DVD
Nr=5197 MICROSOFT WINDOWS VISTA DRIVER KIT RTM (DEVELOPMENT KIT) 1DVD
Nr=5196 PINNACLE STUDIO PLUS TITANIUM EDITION V10 6 MULTILANGUAGE
(VIDEO EDITING) 1DVD
Nr=5195 PTC PRO ENGINEER WILDFIRE V3.0 M040 (3D MECHANICAL) 3CD
Nr=5194 MICROSOFT WINDOWS INTERNET EXPLORER VERSION 7.0
Nr=5193 MICROSOFT TECH-ED 2006 ISA SERVER 2006 LAB
Nr=5192 SYMANTEC BACKUP EXEC V11D (BACKUP/RESTORE)
Nr=5191 CORELDRAW GRAPHICS SUITE X3 - LESSONS (LESSONS)
Nr=5190 LYNDA COM ACROBAT 8 PROFESSIONAL BEYOND THE BASICS (TRAINING)
1DVD
Nr=5189 ARCSOFT SHOWBIZ DVD V2.2.2.78 (GIS)
Nr=5188 INVENSYS SIMSCI PROII V8.0 (MODEL)
Nr=5187 MUVEE AUTOPRODUCER 5.0.9.9 (VIDEO EDITING)
Nr=5186 SURFWARE SURFCAM VELOCITY II SP2 (CAD/CAM)
Nr=5185 LASERFICHE V7.2 (DOCUMENT MANAGEMEN)
Nr=5184 IGO FIGURE V3.2 (MANAGEMENT)
Nr=5183 12D MODEL V7.0 (MODELLING)
Nr=5182 MERCURY QUICKTEST PROFESSIONAL 9.0
Nr=5181 MITCHELL GLASSMATE V5.2
new games
Nr=1944 WARHAMMER MARK OF CHAOS (STRATEGY) 1DVD
Nr=1943 HEROES OF MIGHT AND MAGIC V HAMMERS OF FATE (RPG/STRATEGY) 1DVD
Nr=1942 ALPINE SKI RACING 2007 (SPORT) 1DVD
Nr=1941 RTL SKI JUMPING 2007 (SPORT) 1DVD
Mac new programs
Nr= 270 MICROSOFT DUET FOR MS OFFICE AND SAP V1.0
===============================================================
Loads of other great software ( 20,000 plus programs CDs ), 2D3D Model
& Textures 3D CDs, 3D Software & NLE Software CDs, Audio Sounds Sample
CDS, AKAI, Band, BASS, BRASS, DRUM, East West, Quantum Leap Symphonic
Orchestra library ( EWQLSO ), FLUT, GIGA, Tascam GigaStudio, GROOVE,
GUITAR, HIP-HIP, HORN, Ideas, JAZZ, KURZWEIL, M-Audio Pro Sessions,
Percussion, Piano, RnB, ( R&B ), ( R and B ), ROLAND, Spectrasonics,
STRINGS, TUB, Ueberschall, Vienna Symphonic Orchestra Pro Performance (
VSL ) ( GIGA, and EXS24 and CUBE ), VIOL, Steinberg Cubase, HALion,
Nuendo, Wavelab, VST, VSTi, Yamaha Vocaloid, CBT NUGGETS, CISCO,
Carsoft, Alldata ServiceCenter, Mitchell, Winworks Autoshop, AUTOMOTIVE
EXPERT, Mazak CPC Software, FANUC Robotics Simulation Software, Lantek
CAD/CAM, AMADA CAD/CAM,
Copra Roll Forming, Ubeco Profil Roll Form, CAx, CAD, CAM, CAE, Roll
Forming, electronics, EDA. LSI, PCB, FPGA, VHDL, &Other Design CDs,
Jewelry design Software, Digital Stock Footage & Clips CDs, Software
For Technical Analysis of stockscommoditiesfutures markets, GIS,
Tutorials & Manual CDs, Win & Mac programs, 'WinMac', 'PCMaC',
'Win-Mac', 'Multi', 'Multi-Platform', 'MultiFormat', 'MULTIOS',
'HYBRID', CDs, 1. 3D Studio Max ( 3Ds Max ) ( 3DsMax ) Plugins
Collection, Encyclopedia for 3DSMAX, 2. After Effects Plugins
Collection ] (WINMAC), 3. Avid Xpress DV Plugins Collection, 4.
Lightwave Plugins Collection, 5. Maya Plugins Collection, Gnomon Maya
eTutorials & Manual DVDs & CDs, 6. Photoshop Plugins Collection,
working, tested, fully functional, very cheap discounted price, low
cost, please send e-mail tel210@freemail.gr, tel210@mail.gr,
tel210@mailbox.gr
- 11
- 12
- Windows XP Perform Maintain >> cleanmgr.exe is hangingA Puzzler:
Whenever I run the Disk Cleanup utility (cleanmgr.exe)
with my XP Home system, the initial screen never gets
past a few bars in the "scanning: compress old files"
stage.
Cancelling out does not end the process - I must do this
manually in Task Manager.
It just uses up memory and MEGA CPU power.
Nothing on Emachine's site.
Any ideas????????
OS: XP Home, SP1.
machine: Emachines W2785
processor: Athlon XP 2700+
Processor Speed: 2.16GHz
RAM: 480 MB
Many thanks!!
- 13
- 14
- 15
- Windows XP MovieMaker >> Problems with exported video colorI'm having a problem with the color of an exported video. See an example
picture at:
http://www.hikinghomeschoolers.org/Family%20Pictures/DistortedVideo.png
I encoded a video from an analog camera using a Hauppauge capture card to an
uncompressed WMV file using Windows Media Encoder and then imported this file
into WMM on Vista. The video imported into WMM and plays fine there, but
after I publish the video I get this result upon playback. The title screen
WMM inserted looks good, but the video is all "pinkish".
Any hints?
|
| Author |
Message |
Jeremy
|
 Posted: Fri Sep 26 19:07:19 CDT 2003 |
Top |
Windows XP Security >> DVD-ROM Drive
Get this message whenever trying to burn files to a CD-R
or CD-RW. I am logged on as an adminsitrator. "do not
have access to the folder D:\ See your administrator for
access to this folder" What settings can I change to be
able to write to this drive? Plays DVDs and music CDs
fine and will install programs from D:. Did check
regedit to see if drive type was 1 or 2 to allow
recording.
Thanks.
Windows XP616
|
| |
|
| |
|
GoumbaYa
|
| Posted: Fri Sep 26 19:07:19 CDT 2003 |
Top |
Windows XP Security >> DVD-ROM Drive
Which CD burning software are you trying to use?
"Erik" <EMail@HideDomain.com> wrote in message
news:0e7201c38488$96a0dfd0$EMail@HideDomain.com...
> Get this message whenever trying to burn files to a CD-R
> or CD-RW. I am logged on as an adminsitrator. "do not
> have access to the folder D:\ See your administrator for
> access to this folder" What settings can I change to be
> able to write to this drive? Plays DVDs and music CDs
> fine and will install programs from D:. Did check
> regedit to see if drive type was 1 or 2 to allow
> recording.
>
> Thanks.
|
| |
|
| |
|
| |
|
Index ‹ Windows XP ‹ Windows XP Security |
- Next
- 1
- Windows XP Hardware >> Driver Irql-not-less-or-equali keep getting this message that goes traight to a blue
screen, dumps the physical memory, and says that its
because the Irql-not-less-or-equal. Now, i have updated
every single driver i have, as well as fiddled in bios.
Does anyone know how to fix this problem?
- 2
- Windows XP Hardware >> Error Message while on AOLWhen I am on Aol O get thrown off and this comes on screen:
Main Module
szapp name:waol.exe sz appver.6.0.0.0 sz mod nasme:hungapp
sz modver : 0.0.0.0. offser : 00000000
Reporting details:
This error report includes information regarding the main module when the problem occurred the operating
system version and computer hardware in use and internal protocal (IP) address of your computer. The
following files will be included in this error report:C:\Docume~1\default\locales~1\temp\wer\ae.tmp.dir00\waol.exe.mdmp
C:\Docume~1\default\locales~ 1 \temp\weriae.tmp.dir00\appcompat.txt Then it says report toMicrosoft. Can someone help?
- 3
- Windows XP Network >> Printer problem:How can you stop the default printer from changing when it isn't available?
I am using Windows XP Home with SP2, it did the same thing when I before SP
2.
Gary
garythomak@hotmail.com
- 4
- 5
- Windows XP Perform Maintain >> Windows Vista / XPHello all,
I have researched back through earlier posts, and none I saw revealed the
question I need.
I have my Desktop pc, and for Xmas, gave a laptop pc with Vista installed.
Unfortuntlly, the "group sale" (pc, printer, router) was great to have, it
came loaded with a minimum of software.
She is needing a word processing program.
From my pc, I have the Works Suite (2004), along with many others.
Can software for XP be used for Vista ??
By the way, I need a new keyboard ... this one misspells terribly ...
Thanks all ....
---25or6to4---
- 6
- 7
- Windows XP >> Internal ErrorI have a program that ran OK on Win98 and the documentation (several years
old) says it will work on WinNT. When I try to run it in WinXP it won't run
at all. I get a beep and a little window comes up that says Internal Error
(a red X in a circle) and main2_w, 150.
Anyone have any clue about this?
--
Darrell R. Schmidt
dschmidt1@cox.net
B-58 Hustler History: http://members.cox.net/dschmidt1/
- 8
- Windows XP Security >> XP HOME local security settings issueI am running XP Home and under administrative tools, there
is no "local security settings", i would rather not have
the traditional "power users" and "administrator" rights
for each of the names on the computer, i would like to
have more flexibility in controlling who can do what and
so forth, how would i go about doing this if i cannot find
the local security settings or the computer configuration
dialogue boxes anywhere on my system, thanks in advance
- 9
- 10
- Windows XP Support >> Weird beeping from inside notebookHi there,
I get weird beeping noises from my IBM T23 (PIIIM, 1.2GHz) - but only
when certain applications are loaded. I noticed the beeps from under
the left palmrest when one or more of the following apps are loaded,
even when in the background and completely idle:
- Trillian or Skype
- Flash-enabled websites
- Windows Media Player
No beeping with IE, Office, Movie Maker, Mozilla
I'm running XP Pro SP2. Someone suggested that this might be
SP2-related. I will further investigate this with a clean install
without SP2.
When Speedstep is set to "Adaptive", the beeping is related to any
activity on the laptop, i.e. moving windows, clicking a link in my
browser etc. loudens the beeping.
The beeping is more obvious when running on AC, as the CPU runs faster.
On the slow and very slow setting, it is more silent.
What could that be? It doesn't seem to come from the speakers,
attaching headphones or muting them doesnt help.
You can follow the same issue here:
http://forum.thinkpads.com/viewtopic.php?t=7563
Any help would be greatly appreciated
ToC
- 11
- Windows XP >> can't import foreign volumei have connected a 160 GB HD via USB to my Computer.
the HD is formated as a dynamic volume. when i try to=20
import the foreign volume i get the following error-
message:
=20
"Interner Fehler - Eine Datentr=E4gergruppe mit dem=20
angegebenen Namen ist bereits vorhanden. (C100007A)."
translated:
"internal errot - a volume with the specified name is=20
already existent."
i connected the HD several times befor whitout any=20
problems.=20
if yo know what's to do please tell me.
thanks for reading
chl
- 12
- Windows XP Perform Maintain >> Systenm ShutdownI'm currently working on a Gateway Laptop that will not
shutdown upon command. It goes through the normal shutdown
proccess and once it gets to a certain point, a blue
screen pops up very briefly and states that a problem has
been detected and the system is shutting down but never
does, It loop back and just restarts to the login screen.
Any advice on how to will be greatly appreciated.
Thanks
Eddie
- 13
- Windows XP >> Bad shortcut iconsThe shortcut icons for my MSOffice suite (word, excel,
ppoint, access) as well as adobe acrobat display as
generic icons instead of the specific ones (the blue "W"
for word, the green "X" for excel, etc.) Also, the
documents themselves (like .doc or .xls files) have
generic icons too. The "change icon" button is greyed out
in properties.
I've tried deleting the IconCache.db file and restarting,
and changing the screen resolution and color quality in
display settings. Neither has changed anything.
Please advise.
Owen
- 14
- Windows XP >> Error message when closing Internet explorerWhenever I close down internet Explorer i get this error
message
"The instruction at 0x01732008 referenced at memory at
0x01732008. memory could not be read.
On the top of the error message it is saying that it is
an iexplorer.exe application error.
I am running windows XP and I tried reinstalling
iexplorer but i can get that to complete either.
Any help would be appriciated.
Thanks,
John
- 15
- Windows XP Hardware >> device driver for mustek scannerI have windows xp home edition. After disconnecting my
scanner for some reason weeks ago, i now find i cannot
reinstall it. I am using a usb port and each time i plug
in I get the dreaded blue screen. I then realised i have
to install the driver first then plug in. All i get is
the " Paramount is incorrect". I have managed to dissable
the driver but when inserting cd to install again i still
get the paramount is incorrect. I know i must sound an
idiot but please bear with me as i am 48 and until
January this year had never turned a pc on. I am self
taught and very pleased with myself i have even managed
to install a cd rewriter all on my own. Which has been
working great for 6 months now.
Can some kind wizzard out there tell me where I
am going wrong. Cheers Jenny
|
|
|