 |
|
Index ‹ Windows XP ‹ Windows XP Hardware
|
- Previous
- 1
- Windows XP >> Num Lock failing to set on BootupI was informed that there was two entries in the Registry for turning on Num
Lock when the computer was booted up. It would be appreciated if someone
could tell me the location of these entries in the Registry.
- 2
- Windows XP >> Chinese to English?My son is in China and has the use of a XP Pro PC. Unfortunatly it is in
Chinese. How does he go about changing it to English. Following is a quote
from him
Most of windows is in chinese characters (control panel, start menu,
microsoft word - when you type in word chinese characters appear). The
language toolbar is installed and as far as I can tell has english selected
(I picked it out from what I think was the regional language menu, again
its hard to say because it was in Chinese). The letters 'EN' appear at the
bottom right of the screen, when i click on them there are also options for
CH and JP. All three options are followed by chinese characters, the EN
one I believe is followed by the 2 characters for english, then the 3
characters for canadian in brackets.
Can any one help?
Bob
- 3
- Windows XP Security >> Firewall/ ICS can't startWhen I try to turn on the Microsoft firewall through Control Panels, it tells
me the "Microsoft Firewall/ Internect Connection Sharing cannot start." What
does this mean? I am running Win XP SP2. I have installed Microsoft
Antispyware program as well.
Thank you,
Nick
- 4
- Windows XP Basic >> Scheduling a task to open a web pageHi
I use the Windows Task scheduler to run a variety of tasks, principally
anti-spy scans, on a daily basis. However, it seems that the scheduler
cannot be encouraged to launch a web page at a given time.
Does anyone know if Task Scheduler can be configured to do this?
If not, is it possible to write a small batch file to open the web page
which I can then schedule via Task Scheduler?
I know I can use software such as AlarmWiz to do this for me but I
would like to know if this is a genuine limitation of the Windows Task
Sceduler or not.
Thanks for any suggestions you may have.
Paul
- 5
- Windows XP >> Adobe Reader "speed launcher" in Start MenuFor information:
I have Adobe Reader 7 installed on my computer. By default, it had put
a shortcut for Adobe Speed Launcher in "Start Up" menu. It seems to
serve no purpose, and I decided to remove it from Start Up.
Adobe Web site says: "To disable the Speed Launcher, remove the Speed
Launcher icon from your Startup folder." I tried *deleting* the
shortcut in Start Up, but it would not work.On opening the "Start Up"
folder, the only item I could see was desktop.ini. Finally, I got rid
of it by dragging the icon on to the desktop with the mouse, and then
deleting it.
- 6
- Windows XP >> Online UpdatesOne of the online windows XP updates that XP tells me to
downloaded had a speech program in it. I don't want it
but Windows won't let me delete it, how can I get ride of
it
- 7
- Windows XP >> folder thumbnail problemFor a folder containing images, I used the folder
properties to choose one image to appear on the thumbnail
view of the folder. Unfortunately, this image has shown
up on the thumbnails of other folders as well. Whatever
image I assign to any of these folders, the other folders
use the same image.
How can I fix this?
- 8
- Windows XP >> Problem with System RestoreI am running XP Pro ver.5.1, service pack 2. Also McAfee virusscan 10.
After running system restore when the computer reboots I get the error
message "Some components of ActiveShield are either missing or might not have
been installed properly." I then have to reinstall McAfee VirusScan
(downloading about 14 MB from the internet) which is a bit of a pain. Can
this problem be avoided? Help to do so would be appreciated.
Thanks
JJ.Mac
- 9
- Windows XP Network >> WebDAV folder from command lineThis is related to my last question, but slightly
different. On Microsoft's support web site, I find this
quotation:
====
Windows clients (Windows 2000 and Windows XP): Connect to
a WebDAV directory by adding the directory to the list of
Network Places and display the contents as if it were part
of the same file system on your local computer. Once
connected, you can drag and drop files, retrieve and
modify file properties, and complete many other file-
system tasks. You can also connect using the command-line
client (known as WebDAV Redirector). This client allows
you to use existing applications across the Web and share
files through firewalls and proxy servers.
====
How do you "connect using the command-line client known as
WebDAV Redirector"? Is there a webdav executable? How do
you reference the WebDAV folder? What's the syntax?
WebClient services are running.
Thanks,
- 10
- Windows XP Hardware >> Inventoring my WindowsI have several Windows XP disks around my house - and a couple of
Windows machines and a Mac with Parallels.
I'm going to upgrade my main computer and give my oldest away to my
grandson - I'll probably format that first and reinstall Windows.
But I need to inventory my machines and find out which machine is
using which version of Windows.
How do I do that?
- 11
- 12
- 13
- Windows XP Network >> Windows Sockets initialization failedAfter I ran ad-aware standard and deleted all the objects
found, I turned off my pc. When next I started it, I
could not log back on to my user site. I re-installed my
system from the back-up disks that came with the
computer. I still get the error message: Precision
Time; Windows Sockets initialization failed. Does anyone
know of this and how it can be rectified?
- 14
- Windows XP Setup >> Problem after upgradationI was running WIN98SE on my PC, recently I upgraded it to WinXP (Pro). But I
have run into a unknown problem. The ugrade was done without any problem, but
while operating it the system just restarts itself in a middle of program
after say around 10 to 15 Minute most often and sometime in around 45
minutes. In WIN98SE I did'nt encounter any such problem. I also re-installed
WIN98SE to check if there was any hardware problem but WIN98SE was running
fine without any problem.I tried fresh installation of XP as well but the
same problem persist. Below is my machine's configuration:
CPU Type Intel Pentium IIIE, 800 MHz
Motherboard Chipset Intel Whitney i810E
System Memory 128 MB
BIOS Type Award Modular (01/08/01)
Video Adapter Intel(R) 82810E Graphics Controller
3D Accelerator Intel i752
Monitor LG 500E (133836173)
Audio Adapter Intel 82801AA I/O Controller Hub - AC'97
Audio Adapter
Floppy Drive GENERIC NEC FLOPPY DISK
Disk Drive 40 GB Sygate 5600 rpm
Optical Drive LG CD-RW
Network Adapter PPP Adapter.
Modem V92 Analog PnP Modem
Can anyone help me out, please.
- 15
- Windows XP Security >> RPC Service ProblemWhile troubleshooting an issue, I very stupidly changed the RPC service Logon
Account from the default account to 'Local System Account'.
Since then, I've been getting various DCOM, COM+, etc, errors in my event
log, and some programs are bombing out trying to run.
Does anybody know a way I can get the RPC service back to the way it was? I
don't remember the account it uses by default, and I wouldn't know the
password for it if I did (though I do faintly recall a program that can give
you this info).
Any help would be greatly appreciated.
Thank you,
Thomas Foster
|
| Author |
Message |
Jupiter
|
 Posted: Sun Jul 20 21:27:30 CDT 2003 |
Top |
Windows XP Hardware >> Posts Overlooked?
I have posted this 3 different times over the past 2 weeks
and no one at all has responded. By chance were my posts
overlooked or is it not that common of a problem?
My startup screen halts when i try to load windows. I just
reformated the drive and reloaded windows on it. It works
in another computer but not in this one. No matter if i
choose start from last known config ect.. I have changed
nothing in the bios and it has worked on this same
computer before. When i choose to load in safe mode it
stops at this
multi(0)disk(0)rdisk(0)partition\WINDOWS\System32
\Drivers\Mup.sys
what is Mup.sys and how could i solve this probleM?
.
now there are updates to this post...
I have formated and reinstalled windows on the same hd..
does not fix the problem and the hd works on another
computer so its not the hd. I have turned off usb support
didnt fix it so i turned it back on. I also removed and
reinserted many of these to see if it was the problem.
Ram 1 stick at a time, cdrom and dvdroms both, removed the
usb cords from the motherboard. I have tried everything
that i can think of.. can anyone help?
Windows XP1257
|
| |
|
| |
|
Bob
|
| Posted: Sun Jul 20 21:27:30 CDT 2003 |
Top |
Windows XP Hardware >> Posts Overlooked?
"sean" <EMail@HideDomain.com> wrote in message
news:000901c34f2d$7eeba180$EMail@HideDomain.com...
> I have posted this 3 different times over the past 2 weeks
> and no one at all has responded. < snip >
No one has any obligation to respond. For myself, I
very quickly pass by posts that don't get to the point
quickly, or have a bunch of misspellings or poor
grammar.
-- Bob Day
|
| |
|
| |
|
sean
|
| Posted: Mon Jul 21 10:18:00 CDT 2003 |
Top |
Windows XP Hardware >> Posts Overlooked?
thanks, i did try this but neither worked
>-----Original Message-----
>Turning off USB support in the BIOS may or may not help
here.
>Try physically disconnecting all of the USB peripherials
and
>see if that helps.
>
>
>
>
>On Sun, 20 Jul 2003 19:12:11 -0700, "sean"
<EMail@HideDomain.com> wrote:
>
>>I have posted this 3 different times over the past 2
weeks
>>and no one at all has responded. By chance were my posts
>>overlooked or is it not that common of a problem?
>>
>>My startup screen halts when i try to load windows. I
just
>>reformated the drive and reloaded windows on it. It
works
>>in another computer but not in this one. No matter if i
>>choose start from last known config ect.. I have changed
>>nothing in the bios and it has worked on this same
>>computer before. When i choose to load in safe mode it
>>stops at this
>>
>>multi(0)disk(0)rdisk(0)partition\WINDOWS\System32
>>\Drivers\Mup.sys
>>
>>what is Mup.sys and how could i solve this probleM?
>>.
>>
>>now there are updates to this post...
>>I have formated and reinstalled windows on the same hd..
>>does not fix the problem and the hd works on another
>>computer so its not the hd. I have turned off usb
support
>>didnt fix it so i turned it back on. I also removed and
>>reinserted many of these to see if it was the problem.
>>Ram 1 stick at a time, cdrom and dvdroms both, removed
the
>>usb cords from the motherboard. I have tried everything
>>that i can think of.. can anyone help?
>
>.
>
|
| |
|
| |
|
sean
|
| Posted: Mon Jul 21 10:20:05 CDT 2003 |
Top |
Windows XP Hardware >> Posts Overlooked?
thanks for this one also. but i had already found that
post. I tried removing everything so far except my vidio
card. and will try that this coming weekend. I have
removed usb 6 chanel sound. 1 ram stick at a time..
nothing seems to be working.
>-----Original Message-----
>Read this
>http://www.earthv.com/tips_detail.asp?TipID=63
>
>--
>-----
>Paul
>-----
>www.paulsxp.com
>www.paulsxp.com/forums
>
>"sean" <EMail@HideDomain.com> wrote in message
>news:000901c34f2d$7eeba180$EMail@HideDomain.com...
>> I have posted this 3 different times over the past 2
weeks
>> and no one at all has responded. By chance were my posts
>> overlooked or is it not that common of a problem?
>>
>> My startup screen halts when i try to load windows. I
just
>> reformated the drive and reloaded windows on it. It
works
>> in another computer but not in this one. No matter if i
>> choose start from last known config ect.. I have changed
>> nothing in the bios and it has worked on this same
>> computer before. When i choose to load in safe mode it
>> stops at this
>>
>> multi(0)disk(0)rdisk(0)partition\WINDOWS\System32
>> \Drivers\Mup.sys
>>
>> what is Mup.sys and how could i solve this probleM?
>> .
>>
>> now there are updates to this post...
>> I have formated and reinstalled windows on the same hd..
>> does not fix the problem and the hd works on another
>> computer so its not the hd. I have turned off usb
support
>> didnt fix it so i turned it back on. I also removed and
>> reinserted many of these to see if it was the problem.
>> Ram 1 stick at a time, cdrom and dvdroms both, removed
the
>> usb cords from the motherboard. I have tried everything
>> that i can think of.. can anyone help?
>>
>
>
>.
>
|
| |
|
| |
|
Midnight
|
| Posted: Mon Jul 21 10:49:48 CDT 2003 |
Top |
Windows XP Hardware >> Posts Overlooked?
This mup.sys problem seems to crop up in different areas during the boot
process for different people. I just had a quick look aroung and found this
forum post http://www.annoyances.org/exec/forum/winxp/t1047532372 which has
a few other peoples problems and some fixes. Watch out for the line wrapping
if you try and go to the site.
May or may not help.
Midnight
"Michael" <EMail@HideDomain.com> wrote in message
news:04bb01c34f61$5aa1efd0$EMail@HideDomain.com...
> I tried what the post said, but nothing for me, This
> problem also is happening for me :(
>
> >-----Original Message-----
> >I have posted this 3 different times over the past 2
> weeks
> >and no one at all has responded. By chance were my posts
> >overlooked or is it not that common of a problem?
> >
> >My startup screen halts when i try to load windows. I
> just
> >reformated the drive and reloaded windows on it. It works
> >in another computer but not in this one. No matter if i
> >choose start from last known config ect.. I have changed
> >nothing in the bios and it has worked on this same
> >computer before. When i choose to load in safe mode it
> >stops at this
> >
> >multi(0)disk(0)rdisk(0)partition\WINDOWS\System32
> >\Drivers\Mup.sys
> >
> >what is Mup.sys and how could i solve this probleM?
> >..
> >
> >now there are updates to this post...
> >I have formated and reinstalled windows on the same hd..
> >does not fix the problem and the hd works on another
> >computer so its not the hd. I have turned off usb support
> >didnt fix it so i turned it back on. I also removed and
> >reinserted many of these to see if it was the problem.
> >Ram 1 stick at a time, cdrom and dvdroms both, removed
> the
> >usb cords from the motherboard. I have tried everything
> >that i can think of.. can anyone help?
> >
> >.
> >
|
| |
|
| |
|
sean
|
| Posted: Mon Jul 21 13:48:39 CDT 2003 |
Top |
Windows XP Hardware >> Posts Overlooked?
I just wanted to say thanks. That site has some good info
and i am going to try it.
1. going to try and disable mup.sys see if that works.
2. if that doesnt work i will try to get a new processor
and see if that works :)
>-----Original Message-----
>This mup.sys problem seems to crop up in different areas
during the boot
>process for different people. I just had a quick look
aroung and found this
>forum post
http://www.annoyances.org/exec/forum/winxp/t1047532372
which has
>a few other peoples problems and some fixes. Watch out
for the line wrapping
>if you try and go to the site.
>
>May or may not help.
>
>Midnight
>
>
>"Michael" <EMail@HideDomain.com> wrote in message
>news:04bb01c34f61$5aa1efd0$EMail@HideDomain.com...
>> I tried what the post said, but nothing for me, This
>> problem also is happening for me :(
>>
>> >-----Original Message-----
>> >I have posted this 3 different times over the past 2
>> weeks
>> >and no one at all has responded. By chance were my
posts
>> >overlooked or is it not that common of a problem?
>> >
>> >My startup screen halts when i try to load windows. I
>> just
>> >reformated the drive and reloaded windows on it. It
works
>> >in another computer but not in this one. No matter if i
>> >choose start from last known config ect.. I have
changed
>> >nothing in the bios and it has worked on this same
>> >computer before. When i choose to load in safe mode it
>> >stops at this
>> >
>> >multi(0)disk(0)rdisk(0)partition\WINDOWS\System32
>> >\Drivers\Mup.sys
>> >
>> >what is Mup.sys and how could i solve this probleM?
>> >..
>> >
>> >now there are updates to this post...
>> >I have formated and reinstalled windows on the same
hd..
>> >does not fix the problem and the hd works on another
>> >computer so its not the hd. I have turned off usb
support
>> >didnt fix it so i turned it back on. I also removed and
>> >reinserted many of these to see if it was the problem.
>> >Ram 1 stick at a time, cdrom and dvdroms both, removed
>> the
>> >usb cords from the motherboard. I have tried everything
>> >that i can think of.. can anyone help?
>> >
>> >.
>> >
>
>
>.
>
|
| |
|
| |
|
sean
|
| Posted: Mon Jul 21 16:05:25 CDT 2003 |
Top |
Windows XP Hardware >> Posts Overlooked?
hmmmm this helps......
>-----Original Message-----
>
>"sean" <EMail@HideDomain.com> wrote in message
>news:000901c34f2d$7eeba180$EMail@HideDomain.com...
>> I have posted this 3 different times over the past 2
weeks
>> and no one at all has responded. < snip >
>
>No one has any obligation to respond. For myself, I
>very quickly pass by posts that don't get to the point
>quickly, or have a bunch of misspellings or poor
>grammar.
>
>-- Bob Day
>
>
>.
>
|
| |
|
| |
|
Len
|
| Posted: Tue Jul 22 06:06:48 CDT 2003 |
Top |
Windows XP Hardware >> Posts Overlooked?
It is probably not mup.sys that is the problem. That driver is simply the
last one to load the is "echo"ed to the monitor. After that point the OS
hands over control to the higher level (32 bit) drivers which produce the
GUI.
Based on what I understand from reading your post, it may be worth while to
try another video card. Video drivers and video card issues seem to be a
leading cause of the OS not going into GUI mode on start-up.
YMMV
Good Luck,
Len
"Michael" <EMail@HideDomain.com> wrote in message
news:04bb01c34f61$5aa1efd0$EMail@HideDomain.com...
> I tried what the post said, but nothing for me, This
> problem also is happening for me :(
>
> >-----Original Message-----
> >I have posted this 3 different times over the past 2
> weeks
> >and no one at all has responded. By chance were my posts
> >overlooked or is it not that common of a problem?
> >
> >My startup screen halts when i try to load windows. I
> just
> >reformated the drive and reloaded windows on it. It works
> >in another computer but not in this one. No matter if i
> >choose start from last known config ect.. I have changed
> >nothing in the bios and it has worked on this same
> >computer before. When i choose to load in safe mode it
> >stops at this
> >
> >multi(0)disk(0)rdisk(0)partition\WINDOWS\System32
> >\Drivers\Mup.sys
> >
> >what is Mup.sys and how could i solve this probleM?
> >..
> >
> >now there are updates to this post...
> >I have formated and reinstalled windows on the same hd..
> >does not fix the problem and the hd works on another
> >computer so its not the hd. I have turned off usb support
> >didnt fix it so i turned it back on. I also removed and
> >reinserted many of these to see if it was the problem.
> >Ram 1 stick at a time, cdrom and dvdroms both, removed
> the
> >usb cords from the motherboard. I have tried everything
> >that i can think of.. can anyone help?
> >
> >.
> >
|
| |
|
| |
|
| |
|
Index ‹ Windows XP ‹ Windows XP Hardware |
- Next
- 1
- Windows XP >> Network and Hardware ConflictWhen I run either ITunes or Printshop v20 my HP 2610 all-in-one printer goes
nuts. All the panel lights flash and it becomes unusable until I remove the
power cord and plug it back in. The same thing happens when I run the
software from my HP notebook and my desktop computer. The printer is
connected to both computers via a wired network. I have tried changing the
network address for the printer numerous times without result. Anyone have
any suggestions???? Thanks!
- 2
- Windows XP Update >> Not allowing me to use ActiveX ControlsWhenever I try to perform manual Windows Update on one of the computers I
service, the information bar pops down and says "Your security settings do
not allow web sites to use ActiveX controls installed on your computer."
I've tried changing all activex settings to enable or prompt, but same thing
keeps happening. I am unable to set the internet security setting to
medium-low.
Running Windows XP Pro SP2 with somewhat current updates (stopped working
all of a sudden; user has only user privileges, so couldn't have done this).
I don't mind running automatic updates, but it's against company policy, so
I just want to standardize everything. What am I not doing/doing wrong?
- 3
- Windows XP >> Personalized Favorites Acting StrangelyI've got an annoying problem with IE 6.0. I have the Personalized
Favorites setting enabled. However, here are some of the things I've
observed.
1. Sometimes, on SOME Favorites folders, the most-recently-used
favorites appear, with the less-recently-used Favorites being hidden,
exactly as expected.
2. Somtimes, this feature works exactly OPPOSITE, with the
less-recently-used Favorites being displayed, while the
most-recently-used favorites are hidden.
3. Sometimes, the feature does not work at all, and all Favorites are
displayed. This happens most often on the Favorites folders I access
most frequently, even if I only use one shortcut over and over again!
4. Somtimes, a folder will be displayed correctly one day, and then
everything will be displayed the next day, even though I have changed
nothing!
It's a little thing, but it's gotten too irritating to deal with.
Anyone have any ideas other than a schizophrenic IE?
- 4
- 5
- Windows XP Security >> Can access computer with fingerprint but forgot admin password.Since using my Microsoft fingerprint reader to access my xp admin acct (the
only acct on my cpu) I have forgotten my password. Now I have read all of the
suggestions such as pressing f8 on start up and select safe mode etc.... my
question is, since i do have access to my computer is there another way to
get, retrieve or replace my administrator password and does the f8 suggestion
do any damge to the computer or any files other than the password its self ?
Really want to fix problem before there is a problem like my fingerprint
ready taking a crap. Thanks any one with advice .
- 6
- Windows XP Network >> XP pro as home intranet server - ASP not working with Frontpage DBI am using XP professional on a home computer as a server w/IIs, front page server extensions etc
MX Frontpage geneater ASP that used to run fine
Now I get the following when one of the Frontpage generated ASP pages tries to load....
The page cannot be displayed
There is a problem with the page you are trying to reach and it cannot be displayed.
-------------------------------------------------------------------------------
Please try the following
Click the Refresh button, or try again later
Open the d92gyd21 home page, and then look for links to the information you want.
HTTP 500.100 - Internal Server Error - ASP erro
Internet Information Service
-------------------------------------------------------------------------------
Technical Information (for support personnel
Error Type
Server object, ASP 0177 (0x8007007E
8007007
/personal/_fpclass/fpdbrgn1.inc, line 3
Browser Type
Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; .NET CLR 1.0.3705; .NET CLR 1.1.4322)
Page
GET /personal/rclub_interface/Results/results_page.asp
Time
Sunday, January 11, 2004, 2:26:59 PM
More information
Microsoft Support
- 7
- Windows XP Hardware >> GAMES CRASHING XP? XP UPDATES TO BLAME?This problem has happened in the past few months. Around
the time microsoft started releasing those updates for the
sobig worm and such. I downloaded old ones they said were
critical also, and ever since then every time i play
computer games the computer crashes. This happens with
games that are in first person. Games like Mafia do not
crash, and thats a third person game. Games like counter-
strike or battle field crash. I would be playing one time
maybe 30 minutes. THen screen go black, then go back to
what i last saw and then the computer will be jammed
making me have to reset it using hte power switch. This is
very annoying. THe next time i got back, it will take less
than 10 minutes to do the same thing over. I tried
everything you guys said on stuff related, about msconfig,
about setting hardware acc to two to the left, turning off
anti alias, all sorts of things. And these problems arent
caused by my video card because I was using the same
drivers for over 6 months then I get this problem so I
update drivers for card and no luck still. Computer is not
overheating, I check bios its 120-125 degrees farenheit.
System:
HP Pavillion
Windows XP Home
1.67 ghz
512 mb ram
80 GB HD
cd-rw
32 mb nvidia geforce2 integrated gpu
I even used a virus scanner from a site you gave and I
found three minor trojans that would not cause this
because this has been happening before I got them. What is
the problem? I suspect its something in the updates. Or,
my computer IS overheating, I looked inside, no dust, fans
working well, evrything is fine. I have latest directx and
have since it came out. My power surge protector is where
I have plugged computer in for long time, since my old
computer and I dont think it has to do with power supply.
Same cords since beginning when I got computer. Computer
is about 3 years old little younger and problem happening
since 6 or so months, around late july. What is the
problem? Thanks
- 8
- 9
- Windows XP >> Password on StartupI just upgraded to XP Pro. For a couple of days, I could start it up
without any password, the way I did with WinMe. Today, at startup it
brings up a password dialog box. I suspect it is a result of my
installing last night MS Office XP &/or its media disk or its
interactive tutorial.
Whenever the password dialog has come up, I have just pressed OK. But I
would like to eliminate that step as I did in WinMe. I am the only
one using the computer and it is in my home. So, I do not need the
security of the password. Can someone tell me how to get rid of the
password dialog box? Thanks.
- 10
- 11
- Windows XP Hardware >> messenger+webcamHelp, when i try to run my cam with windows messenger,
the pc crashes, yet i can use yahoo chat no problems,and
even windows media encoder without any crashes.
i have msn 6.1 and a logitech quickcam express, i have
all latest drivers,usb drivers,gcard drivers and have cfg
msn chat with the audio/video wizard, (doesnt crash if i
aint signed in).
as i say it crashes my pc, as soon as i click the web
button on msn chat, but not on any other chat proggie :(
- 12
- Windows XP >> Running Home network with McAfee Int SecurityGreetings
Does anyone know of an idiot's (me) guide to setting up a home network/ICS
with McAfee Internet security v 5?
The 3 networked home computers worked fine including sharing internet via a
switch and using ICS in xp pro.Since installing Mcafee only host computer
can access net.Manual doesn't seem too helpful
Thanks for any pointers
David
- 13
- 14
- Windows XP Security >> PoliciesHello, can someone give me a good resource on XP policies? I need some quick-and-dirty steps on implementing local security policies.
Thanks.
- 15
|
|
|