 |
|
Index ‹ Windows XP ‹ Windows XP Network
|
- Previous
- 1
- Windows XP Support >> sleep awake does not show icons, only backgroundThis is WinXP pro, with all updates applied. When the system display has
gone to sleep and a key is pressed, the background appears but no icons. The
only keys that work are ctl/alt/del. It then shows the icons and the task
manager window. After canceling the task manager window the system seems to
work properly. The system is protected by PCCilian and router firewall.
When I tried to do a repair install using the XP CD, it said the system was
a later version than the CD and did not want to run.
I hope someone has some idea how to eliminate the problem.
Hugh
- 2
- Windows XP Perform Maintain >> Help? Files and Settings transfer wizard questionHello All,
On a regular basis, I use the File & Settings transfer wizard to back up my
settings to a "slave back up drive" in my desktop computer.
Well, my primary drive crashed last week, and now I've replaced it with a
new one, and reloaded XP, along with all my old programs, and all my saved
files that I regularly back up to my slave drive. So now I want to also go
to my slave drive and migrate my old settings that I've saved, onto the new
drive, just like everything else I had backed up and successfully migrated
onto the new hard drive.
So I go to the folder where the settings are stored on the slave drive to
make sure they are there, I can see two files, one named IMG00001.DAT (it's
1.3GB in size), and also a file named "status" it's only 1KB in size.
Now, I open the File and Settings transfer wizard, follow the commands,
then, I get to a question where the wizard asks me something like "where do I
want to retrieve my settings from", so I point the wizard to the folder where
I've saved them at on my slave drive.......
Then, after I hit next, I constantly get an error box that tells me the
following:
"The location that you specified does not contain stored information. Please
type a valid folder path into the edit box.....If you entered a path to a
folder on a removable disk, the disk must be in the drive."
And I can't get past that error message.....I've tried copying the settings
I've saved from my slave drive, onto my new primary drive, and then tried
pointing the wizard to that location thinking that maybe the saved settings
had to be on the primary drive for the wizard to retrieve them, but that
didn't work either.
So I'm stuck, How do I get my old settings migrated onto my new hard drive?
Any help is appreciated, and thanks much in advance.
Robert
07/11/07
1:01am PST
- 3
- 4
- Windows XP Support >> Notification Tray Icons - Display too shortMy father has a new Dell 6400. In the notification tray, he has many
icons. When he hovers his mouse over he icon, it displays what the
icon is. However, the "tip" goes away REALLY fast. I need to
increase this time.
Tried the following:
1) Many articles on how to increase or remove balloon tips. This
doesnt appear to be the same.
2) Updated video card driver.
3) TweakUI (Didnt see anything obvious)
Thanks,
Brian
- 5
- Windows XP >> Quicken 2002I am running windows XP In the Quicken check register ,I am getting too
many payees in the dropdown window,and I can not find away to delete some of
them. If there is some one that can help me with this problem I will
appreciate it very much.
Thank You Richard......
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.532 / Virus Database: 326 - Release Date: 10/27/2003
- 6
- Windows XP Update >> MS: Please Fix svchost.exe problemThis bug has me and apparently many others fighting this problem all the
time instead of getting any work done. It's seems that it is related to
Windows Update.
I have noted the conspicuous absence of replys from anyone at Microsoft when
this problem gets posted - and it gets posted plenty everywhere.
Time to fess up! Stand up, take responsibility, and fix the problem. (or
maybe I'll buy a Mac next time)
--
Regards,
Gary Blakely
- 7
- Windows XP Setup >> System ShutdownBuilt a system for a friend recently. Installed XP Home
and service packs 1 and 2.
Installs all went perfectly with no problems. However
since install the system shuts down after a couple of
minutes for no apparent reason. It totally locks up,
doesn't allow reset or anything and has to have the power
supply shut off at the wall. Once plugged back in it
restarts with out problems and then runs without any
problem till the next time it is switched on.
The system configuration is as follows:
Asrock K7S8XE Mainboard
AMD Athlon XP+ 3200 (200 FSB)
512MB PC3200 DDR 400
120Mb 8Mb Cache 7200 HDD
Nvidia AGP graphics card
Creative Audigy
Realtek 10/100 network card
All the drivers have been updated to the most recent
versions. I am at a loss as to where to go from here with
this problem and would appreciate any suggestions.
Many Thanks
- 8
- Windows XP Support >> Network XP file server set-up difficultiesI'm trying to complete the replacement of an old Linux server for my church
with a new XP file server because we need more storage space and the vendor
for our data management software does not support Linux. Every time they
send a software upgrade, we have problems that they have trouble helping us
resolve because of the way Linux and windows products differ in management
of permissions. Part of the transfer is done and working well, other parts
I'm having trouble getting to allow mapping to two resources simultaneously.
1. Each user needs to be mapped to the data folder for the data management
software [done and running smoothly]
2. Each user needs access to a shared folder for a few documents that we
all need to see and/or modify (password protection desirable, but not
absolutely necessary) [conflicts with step 3 below]
3. Each user also needs access to a folder on the server that only they
have access to (with password protection) [conflicts with step 2 above]
I had steps 1 and 2 done, but when I tried to accomplish step 3, I ran into
conflicts and got messages like: "The network folder is currently mapped
using a different user name and password. To connect using a different user
name and password, first disconnect any existing mappings to this network
share." and/or "Multiple connections to a server or shared resource by the
same user, using more than one user name, are not allowed. Disconnect all
previous connections to the server or shared resource and try again."
When I disconnected and tried again, I lost step 2 on the workstation that I
was using. That's what got me here to ask the wisdom of those who know what
they're doing.
Here's what the file structure I'm trying to work with on the server looks
like (actual file names are different, but this is where they are):
C:\membership data folder
C:\shared documents
C:\users\user1
C:\users\user2
C:\users\user3
C:\users\user4
C:\users\user5
C:\users\user6
I have administrator rights on the server, so I can make any changes in
permissions there. Any help much appreciated.
Thanks.
- 9
- Windows XP Support >> Desktop icons highlightedToday my desktop icons developed backgrounds behind the words. For example
"My Documents" instead of just being words on the screen is now in a
rectangular box. The color of the text box can be changed by changing the
desktop themes but I can't turn it off.
Thanks
Jeff
- 10
- 11
- 12
- Windows XP Update >> Error installing XP Win Update (error log included)I'm running XP Pro, SP2. I run Win Update Express Install, but all "updates
failed to be installed successfully". Tried again with Spy Sweeper and
anti-virus software diabled, no luck.
I'm pasting what I believe to be the relevant entries in the
WindowsUpdate.log. I appreciate any help!
2005-01-14 18:06:11-0600 1484 704 BITS service was not fixed up and thus CCI
was not reattempted. (hr = 80070005)
2005-01-14 18:06:11-0600 1484 704 Failed to connect to the BITS service;
unable to start new downloads or interact with existing download jobs. (hr =
80070005)
2005-01-14 18:06:11-0600 1484 704 DM: pDownloadJob->Init failed with
0x80246008.
2005-01-14 18:06:11-0600 1484 704 Got error (hr = 80246008) starting update
0 in call 11. Notifying call.
2005-01-14 18:06:11-0600 1484 704 Error 80246008 occurred while downloading
update; notifying dependent calls.
2005-01-14 18:06:11-0600 1484 704 WU client persisted 1 download calls
2005-01-14 18:06:11-0600 1484 704 Extended error for reported error 80246008
= 80070005
.
.
.
.
2005-01-14 18:06:11-0600 1484 704 REPORT EVENT:
{FB9285E7-3FB0-4C8C-9A99-E31D77E64870} 86 2005-01-14
18:06:11-0600 1 161 101 {879FFB13-1610-4F09-BF93-A7C6A495175E} 106 80246008 WindowsUpdate Failure Content Download Error: Download failed.
- 13
- Windows XP >> Outlook Express EmailsI did a clean up of my temporary files and also the backup of my
emails (the folder where it stores a backup copy) and now I can
not find any of my emails that I had stored on my email program.
I did a restore to before the point where I cleaned up my computer,
but I still can not find the emails!!! Any suggestions as to how to find
the emails?
Thanks,
EllieSue
- 14
- Windows XP Security >> System32 driversI am getting this message:
Cannot find 'File:///C:/WINNT/system32/drivers/detect.htm'
Make sure the path or Internet address is correct
It started after I discovered malicious software on my computer and I fixed
it. Anyone know how/where I can get this driver? My system is Windows XP,
Home Edition, Version 2002, Service Pack 2.
Thanks.
- 15
- Windows XP >> how can i change the default location of "temp" folderHi all...
i installed ram drive through a s/w known as tweak XP pro. and then i assigned a "temp" folder in windows directory to that location in ram drive,
the problem is that i want to change it to what it was before but cant do it through tweak XP pro
is there any other way i can change the folder pat
plzzzzzzzzz. Help
|
| Author |
Message |
Wesley
|
 Posted: Wed Aug 10 22:28:36 CDT 2005 |
Top |
Windows XP Network >> greyed out vpn box
hi,
my name is tom and i'm having some trouble with connecting to my friend's vpn.
I open up the wizard to create a new connection, i then click on the vpn
tab: 'connect to my workplace'. However when i click next to show the
options: 'connect to vpn' and 'dail-up connection' both options are greyed
out nad i cannot select them.
Windows XP730
|
| |
|
| |
|
Robert
|
| Posted: Wed Aug 10 22:28:36 CDT 2005 |
Top |
Windows XP Network >> greyed out vpn box
This is a multi-part message in MIME format.
------=_NextPart_000_0015_01C59DFA.D94EEBA0
Content-Type: text/plain;
charset="Utf-8"
Content-Transfer-Encoding: quoted-printable
this page may help,
xp sp
... a dial-up modem or VPN option in the New Connection Wizard is =
unavailable (gray
out) ... For the consultants, check vpn connection is gray out page. ...
www.chicagotech.net/xpsp.htm=20
Bob Lin, MS-MVP, MCSE & CNE
How to Setup Windows, Network, VPN & Remote Access on =
http://www.HowToNetworking.com
Networking, Internet, Routing, VPN Troubleshooting on =
http://www.ChicagoTech.net=20
"tom-tom" <EMail@HideDomain.com> wrote in message =
news:EMail@HideDomain.com...
hi,
my name is tom and i'm having some trouble with connecting to my =
friend's vpn.
I open up the wizard to create a new connection, i then click on the =
vpn=20
tab: 'connect to my workplace'. However when i click next to show the=20
options: 'connect to vpn' and 'dail-up connection' both options are =
greyed=20
out nad i cannot select them.
------=_NextPart_000_0015_01C59DFA.D94EEBA0
Content-Type: text/html;
charset="Utf-8"
Content-Transfer-Encoding: quoted-printable
=EF=BB=BF<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; charset=3Dutf-8">
<META content=3D"MSHTML 6.00.2900.2668" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>this page may help,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><A href=3D"http://www.chicagotech.net/xpsp.htm"><FONT =
color=3D#663399>xp=20
sp</FONT></A><BR><FONT size=3D-1><B>...</B> a dial-up modem or =
<B>VPN</B> option=20
in the New Connection Wizard is <B>unavailable</B> =
(<B>gray</B><BR><B>out</B>)=20
<B>...</B> For the consultants, check <B>vpn</B> connection is =
<B>gray</B>=20
<B>out</B> page. <B>...</B><BR><FONT color=3D#008000><A=20
href=3D"http://www.chicagotech.net/xpsp.htm">www.chicagotech.net/xpsp.htm=
</A>=20
</FONT></FONT></DIV>
<DIV><BR>Bob Lin, MS-MVP, MCSE & CNE<BR>How to Setup Windows, =
Network, VPN=20
& Remote Access on <A=20
href=3D"http://www.HowToNetworking.com">http://www.HowToNetworking.com</A=
><BR>Networking,=20
Internet, Routing, VPN Troubleshooting on <A=20
href=3D"http://www.ChicagoTech.net">http://www.ChicagoTech.net</A> =
</DIV>
<BLOCKQUOTE=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"tom-tom" <<A=20
=
href=3D"mailto:EMail@HideDomain.com">EMail@HideDomain.com=
rosoft.com</A>>=20
wrote in message <A=20
=
href=3D"news:EMail@HideDomain.com">news:947=
EMail@HideDomain.com</A>...</DIV>hi,<BR>my=20
name is tom and i'm having some trouble with connecting to my friend's =
vpn.<BR>I open up the wizard to create a new connection, i then click =
on the=20
vpn <BR>tab: 'connect to my workplace'. However when i click next to =
show the=20
<BR>options: 'connect to vpn' and 'dail-up connection' both options =
are greyed=20
<BR>out nad i cannot select them.</BLOCKQUOTE></BODY></HTML>
------=_NextPart_000_0015_01C59DFA.D94EEBA0--
|
| |
|
| |
|
| |
|
Index ‹ Windows XP ‹ Windows XP Network |
- Next
- 1
- Windows XP >> RUNDLL.EXE problemWhen I boot up my machine, I get the following errors:
MFC70.dll - not found
Rundll.exe - unable to locate component (What component?)
Error loading 2ndsrch.dll
- 2
- Windows XP Setup >> Sharing amongst usersI need to disallow users on my computer from viewing files
that belong to other users, such as my documents folder,
ect. I know there is a simple command button that when
clicked, "dissallows users from viewing my files" i've
done it beofre, and now i just cant find it, please help!
- 3
- Windows XP Support >> Cant resurrect systemReturned from holiday to find I can't boot my XP system. Examination with
another OS booted from CD shows that everything in the Windows directory has
disappeared!
When I try to start over with my original XP disk, the system gets as far as
"Loading Windows", with a brief flash of the Windows graphics screen, then
crashes with a blue screen "Windows has closed down to save your computer
from destruction", or words to that effect.
My Partition Magic floppies load, then hang with the hourglass centre stage.
I guess I need to reformat the hard disk, but how?
Tony
- 4
- 5
- Windows XP Network >> Will http://___ browse PCs on LAN?Am using WinXP-pro PCs and Linksys router. The router assigned
192.xxx.xx.200 to this PC
If I'm on a PC within the LAN, shouldn't I be able to open IE6, key in
192.xxx.xx.200, and see what's on this PC?
What happens is...it brings up a username/password screen...
Username. Leaving it blank doesn't work, and if I enter something (like
joe) in the username box, it adds the something to the ip address and
displas that (like... the 192.xxx.xx.200/joe). And still doesn't work.
Password. Entering the router password doesn't work, and I don't know what
other password would exist.
Seems like before I got this VPN router I could simply enter the local IP
address and up came the yellow folders and files.
Wondered what's going on here, thanks
- 6
- 7
- Windows XP >> Long pause if I click a network resource that is not in service?I have a home network with three computers and I frequently share resources
among the computers. Whenever I click anything that happens to be on a
computer that is (temporarily) turned off, I have to wait about 45 seconds
for a message that I don't have permission to access that resource before I
can proceed. Can I reconfigure anything to eliminate this annoyance?
--
JerryI
- 8
- Windows XP Setup >> transfering filesHi,
I was wondering if it's possible to transfer files from one user to another.
Such as Guest to another user. I'm trying to move music files from one
itunes to another. Any info would help.
Thanks :)
- 9
- Windows XP Support >> internet explorerI seem to have downloaded a search bar/engine called isearch and i cannot get
rid of it.It seems to have hijacked my internet explorer and web favourite
items.Please help.Thanks
Samoon
- 10
- Windows XP Perform Maintain >> helpwhen eve you install a program where in the registry does
it go, where on the hd does it gois there any progrmas
that you can get to completely remove stuff left over
from when you install stuff hten uninstall it? ne body
know what im takin about?
- 11
- Windows XP >> Sell a previously activated copy of XPCan you sell a full retail version of Windows XP if you are no longer using
it on the original computer? I have retired a computer that I installed XP
home on and bought a new machine with XP pro pre-installed on it. Can I sell
the XP home package?
- 12
- Windows XP >> Need updated udfs.sysI am currently experiencing problems with UDF discs as described in kb899527,
except that it's with CD-RWs rather than DVD-RWs. The kb says that there is a
hotfix available, but you have to contact Microsoft Product Support Services
to get it. When I try to contact Microsoft Product Support Services though, I
get a screen saying "Products purchased under a Select License Agreement or
Software Assurance Home Use Program are not eligible for no-charge support."
kb899527 states "In special cases, charges that are ordinarily incurred for
support calls may be canceled if a Microsoft Support Professional determines
that a specific update will resolve your problem." So I don't think I'd have
to pay for the hotfix in the end, but I don't want to have to pay for it up
front in any case. Is there any way for me to just download this hotfix
without going through Microsoft Product Support Services?
Thanks,
Uda Quai
- 13
- Windows XP Network >> connecting xp to nt4 server domaincan any one help with this
im trying to connect XP to an nt4 domain server, but it
says it cannot find the domain
i can ping the server nam and its ip address
is this somthing to do with netbios.
i have installed wins but still does not work
many thanks
derrick
- 14
- Windows XP Support >> PDF File Icon ?I'm using Foxit to read PDF files and I do not have Acrobat installed.
Is there any way I can get the Acrobat file icon to be used for my PDF
files (I like it better since it actually shows PDF)? I checked
another PC that is using Acrobat and the icons are in the Acrobat.exe
file, not an icon file.
Thanks for any help on this.
- 15
- Windows XP Support >> COM1 busy and I need it freeI had a small glitch in my WinXP system so I did a reinstall (not a full
reformat). All the programs were saved, but they needed tweeked.
Before I reinstalled WinXP I had my handheld GPS hooked up to my computer so
they can upload to one another thru my COM1 port. Now Im trying to upload
data to my GPS and it is saying, "Since this is the first time you uploaded
to your GPS we will have to find it. Please hook it up and turn it on." I
did. It ran a search and said, "COM1 is busy." But its not. I mean, its
busy with the GPS unit but thats it.
How do I check what my computer thinks its busy with using COM1 and shut it
down?
It kinda sounds like a software problem, but I totally uninstalled and
reinstalled the GPS software and it works perfectly.
Thanks again for the help.
Smed
|
|
|