| Service "Automatic Updates" can not be startet |
|
 |
Index ‹ Windows XP ‹ Windows XP Update
|
- Previous
- 1
- Windows XP >> DVD Burner doesnt show when I have a disk inMy computer came with a preinstalled DVD and CD burner. I can sucessfully
burn audio cds, but whenever I try to burn or copy something to DVD I keep
getting the message, "put a disk in the drive" when I have already done so.
My system obviously recognises the drive but not for the DVD part.. Any ideas?
- 2
- Windows XP Security >> Inactivity PasswordWhen I don't use my computer for at least 15 minutes, then it automatically
brings up a password screen. The only way to begin working on my computer
again is to enter a password. Is there a way to disable this feature? I
have been told that it can be fixed on Control Panel, Display and using the
Screen saver tab. The problem is that I don't have a screen saver tab. How
do I add this to my system?
- 3
- Windows XP Update >> Upgrading to Service Pack 2 IssuesMy hard drive crashed and had to install a new one on a Dell laptop.
Reinstalled XP and all associated updates.
When I try to update to service pack 2 it hangs on "checking product key."
Has happened at least 4 times now. I'm ready to give up and just run what I
have.
Any thoughts?
Thanks in advance.
- 4
- Windows XP >> Can't Delete "Microsoft Websites" from FavoritesI'm using Windows XP Prof, SP2 at work. I use Favorites menu in Windows
Explorer and "Microsoft Websites" is one of the entries. I didn't add it to
Favorites and every time I delete it, it comes back the next time I open
Windows Explorer. It also shows up in IE7 links. How can I make
"Microsoft Websites" disappear permanently from my Favorites list in Windows
Explorer?
- 5
- Windows XP MovieMaker >> Change default location for project files?In MM2, is it possible to change the default location for saving project
files?
It appears to be permanently set to C:\....\My Videos, and I want to save
all my projects on my E drive, and in a folder called Projects. I have to
navigate to that folder every time I create / save a project. (I find "My
Videos" too general a name and I like to split my work into separate folders
i.e. Captured Video, Projects, Saved Movies).
I know how to change the default for temp files but that is not the issue.
My query concerns only Project files.
Thanks
CW
- 6
- Windows XP Hardware >> CD-Drive Problems, (post #2)Two are listed below.
WRITTEN BY: RANDY (AUG 29 2004 4:08AM PDT)
I have a remarkably similar problem in that I just
installed an Artec 16x DVD-ROM drive with a Plexwriter
8/4/32A CD-RW already in use. My bios detects both drives
fine as does Windows XP, but the DVD-ROM only worked at
first install; and after that (even though detected) will
not read ANY disks. Windows XP reports 'no device
conflicts' and 'This device is working properly', but
that
is not true with the DVD-ROM (the CD-RW reads disks
fine).
I've tried multiple primary and secondary IDE connection
and jumper configurations with the same results; I even
went out and bought a PCI Ultra ATA IDE controller card,
put only the DVD-ROM over to it, and it WORKED!
Unfortunately, it only worked the first time (as before),
and after the next computer boot up, again can no longer
read ANY disks. Both drives reported fine by Win XP w/no
conflicts. HERE'S THE KICKER: IF I DISABLE THE CD-RW IN
WINDOWS DEVICE MANAGER, THE DVD-ROM STARTS WORKING FINE!
All my drivers are up to date. It appears there is some
sort of conflict between the drives, but it is beyond me
to figure out how to get both them to work at the same
time. I've tried all possible separations on the IDE
cables (and the PCI card), but that only results in one
or
the other device stopping working. Please, can someone
help me get both drives working at the same time?
WRITTEN BY: TONY (AUG 28 2004 3:50PM PDT)
>-----Original Message-----
>I accidentally posted in General, but anyways, my HP CD
>Writer won't work, won't even read any kind of a cd.
>However, it does show in My Computer, Windows Explorer,
>and Device Manager (as working properly). When I put in
>the driver CD (in another CD Drive) the driver says that
>the Hp CD Writer that I have is not IDE compatable, but
>at boot up, when PC detects IDE hware, it detects the CD
>Writer. And another thing, That second drive is a DVD
>drive. Works fine, but where can I get a compatable DVD
>decoder. Like power dvd or something. It is a toshiba I
>think. Thanks in advance for suggestions.
>
>Tony
- 7
- Windows XP >> Packet Driver for D865PERL LANHi,
I'm trying to run a program called Clarkson Telnet under windows xp in
console mode. This program requires a packet driver. I visited Intel's site
and still not sure which one to download. Please give your opinions
Thanks in advance
Jack
- 8
- Windows XP >> Dialog boxes went crazy after I updated my computer!After I updated my MS programs, recently, the text in some of my dialog boxes
appears Asian or just little boxes and other dialog boxes are part in English
and part Asian or boxes. I checked the language settings and I have no Asian
languages installed on my computer. It is difficult because I don't know
what the dialog boxes say unless I have memorized them! Can anyone help?
--
May grace and Peace be multiplied to you!
- 9
- Windows XP Support >> Service Pack 2 Corrupts Desktop IconsAfter installing SP2 all my desktop icons become corrupt. Double click them
and computer completely locks up, remove sp 2....goes back to working fine.
Anyone else? any fixes?
Also will Windows moviemaker 2.1 work without the SP 2 patch?
Thank You very much in advance
- 10
- 11
- Windows XP Support >> update can't find driversI am trying to install a DVD burner, firewire card, and USB card on my
computer. I have installed them one at a time and each time i restart my
computer, the update window can't find the drivers to install. the devices
seem to work fine, but i continue to get yellow exclamation points beside
each device in device manager.
Any suggestions?
- 12
- Windows XP Security >> Internet Explorer OR Outlook Express Virus? or What?Hi All!
A program automatically launches a site ("w.xx.gigan.to" where 'xx' is the
letters that I can't recall) and start to download a CAB file using Internet
Explorer. I tried to close it and a message box appear "You must choose yes
to install". So I didn't click anything and I shut down the Internet
Explorer using Task Manager.
And it didn't go away because I can see the movement in network activity. So
I disable the LAN. That's when I got a dialog box asking which connection I
want to use to connect to the Internet because 'you' or a program requested
information from <<site>>. Sorry guys I was really panicked and didn't
recorded the site address. But as far as I recall it is: "w.xx.gigan.to"
where 'xx' is the letters that I can't recall. That site also as one line of
text saying "If you are happy....you are a prick" or something like that. By
looking at this, we can concluded that this is a Trojan right? Showing
something interesting (or something that you need time to figure out) in
front of you and start messing up with your computer at the back.
So I start System Restore and I restore it to a previous point and when it
start to shut Windows down, Outlook Express ask a message box "Are you sure
you want to terminate this download?". That's when I concluded that the
virus might have entered (or still entering) to my computer through Outlook
Express. But it could also be thought Internet Explorer or any thing else
for that matter. I can't say for sure. After System Restore , my computer is
ok now.
Another strange thing to note is that this incident happened after I
rebooted my computer after running a security update from Microsoft for
Download.Ject virus detection and removal, which can be accessed via:
http://www.microsoft.com/security/incident/Download_Ject.mspx
Anybody happen to experience similar incident like mine? Or am I the only
one?
My computer has...
- Internet Explorer 6
- Outlook Express 6
- Windows XP SP1
Please, could anyone suggest what on earth is happening to my computer?
Thanks in advance!
Don
- 13
- Windows XP Perform Maintain >> Runner Error upon bootingWhen initially booting, I get a rectangular box, with Runner Error, on a blue background. Inside the next bos is the message, "Invalid BACKWEB application id "137903"". I must either click on the "X" by Runner Error, or on the OK box at the bottom. What cures this? What initially caused it? Had this since about 3 weeks after purchase.
- 14
- Windows XP Network >> Wireless Woes DetailsFrom the previous message at 3:13, here are some more=20
details from the event viewer:
Event Type: Information
Event Source: Application Popup
Event Category: None
Event ID: 26
Date: 1/22/2004
Time: 12:46:36 AM
User: N/A
Computer: CRAP
Description:
Application popup: Windows - System Error : There is an=20
IP address conflict with another system on the network=20
For more information, see Help and Support Center at=20
http://go.microsoft.com/fwlink/events.asp.
Event Type: Error
Event Source: Tcpip
Event Category: None
Event ID: 4199
Date: 1/22/2004
Time: 12:46:36 AM
User: N/A
Computer: CRAP
Description:
The system detected an address conflict for IP address=20
192.168.1.148 with the system having network hardware=20
address 00:E0:98:B3:43:A0. Network operations on this=20
system may be disrupted as a result.
For more information, see Help and Support Center at=20
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 00 00 00 00 03 00 50 00 ......P.
0008: 00 00 00 00 67 10 00 c0 ....g..=C0
0010: 00 00 00 00 00 00 00 00 ........
0018: 00 00 00 00 00 00 00 00 ........
0020: 00 00 00 00 00 00 00 00 ........
- 15
- Windows XP Security >> windows xp network loginIs there anyway to get a machine with only winxp to boot if
the password isn't working(password typed correctly!) You
do not know the admin password because the manufactor of
the computer was the one to install the OS and did not tell
the passwrd, and the stupid people you work for did not
redo the machine
|
| Author |
Message |
ivansh
|
 Posted: Thu Sep 15 06:49:20 CDT 2005 |
Top |
Windows XP Update >> Service "Automatic Updates" can not be startet
Hello
I have got a huge problem:
On my Windows 2000 Server the service "Automatic Updates" can not be startet
or restartet. I get the message "Access Denied". I have admin-permissions on
the server. When I try to update over MicrosoftUpdate-Page I get the
Error-Code 0x80070005. I already tried every advice from Microsoft. When I
try to register the "wuaueng.dll" with "regsvr32 wuaueng.dll" I get the same
Error 0x80070005.
The Dll can not be registered
MfG Eddy
Hoffentlich wird des net genehmigt ...
Windows XP1200
|
| |
|
| |
|
fermu
|
| Posted: Thu Sep 15 06:49:20 CDT 2005 |
Top |
Windows XP Update >> Service "Automatic Updates" can not be startet
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Eddy wrote:
> Hello
> I have got a huge problem:
>
> On my Windows 2000 Server the service "Automatic Updates" can not be startet
> or restartet. I get the message "Access Denied". I have admin-permissions on
> the server. When I try to update over MicrosoftUpdate-Page I get the
> Error-Code 0x80070005. I already tried every advice from Microsoft. When I
> try to register the "wuaueng.dll" with "regsvr32 wuaueng.dll" I get the same
> Error 0x80070005.
> The Dll can not be registered
The error code 0x80070005 means, "ERROR ACCESS DENIED"
You may want to read this kb article about your issue,
**/Updates from the Windows Update Web site are not installed and an
"Error 0x80070005: Access is denied" error message is logged to the
Windows Update.log file
http://support.microsoft.com/default.aspx?scid=kb;en-us;836926
If all suggesstions does not work try restoring the default permissions
in the system typing this command (start /run /cmd.exe)
secedit /configure /cfg %windir%\repair\secsetup.inf /db secsetup.sdb
/verbose
- --
Saludos
Fernando M. / Registered Linux User #367696
Fermu's Website - http://www.fermu.com
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.2 (MingW32)
iD8DBQFDKV/ATOjWl8puOQ4RAhamAKC6uqkSQWRtRCCiNgwkjurIzMZpsQCbBrzU
m+LAnVEukOxUXQA1Rc81UkQ=
=4rqJ
-----END PGP SIGNATURE-----
|
| |
|
| |
|
Eddy
|
| Posted: Thu Sep 15 07:07:02 CDT 2005 |
Top |
Windows XP Update >> Service "Automatic Updates" can not be startet
Hello fermu,
I already tried the KB836926 article ...
What can happen if I run the secedit - command ?
thanks
|
| |
|
| |
|
fermu
|
| Posted: Thu Sep 15 07:11:29 CDT 2005 |
Top |
Windows XP Update >> Service "Automatic Updates" can not be startet
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Eddy wrote:
> What can happen if I run the secedit - command ?
This command apply default security settings to the system files and
folders located on the boot partition and also on regedit keys
- --
Saludos
Fernando M. / Registered Linux User #367696
Fermu's Website - http://www.fermu.com
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.2 (MingW32)
iD8DBQFDKWTxTOjWl8puOQ4RAp1GAJ99Lw25DElX9Y8Yn7/t6kmKY7hVYACfZQw8
KalyDVrFwPtJAldvZtAm5sA=
=AolW
-----END PGP SIGNATURE-----
|
| |
|
| |
|
| |
|
Index ‹ Windows XP ‹ Windows XP Update |
- Next
- 1
- Windows XP Security >> XP Driver CertificationI am trying in install a VOX MSI 8609 external tv tuner
onto my laptop. I am getting a message saying that the
driver I am installing cannot be installed under
ServicePack2, only earlier versions (i.e. ServicePack1).
It also states that the driver I am installing has not
passed Microsoft certification...
Can anyone give me advice on what I can do to get this
tuner working?
Thanks
Jerry
figjer@hotmail.com
- 2
- Windows XP Network >> "Use simple file sharing" setting will not stay changed!Hi Everyone,
As the subject states, I am clearing the Use simple file sharing setting
(no check mark). Once I restart the PC, the check mark is back!
Also, connected with this issue, the Forceguest setting under
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa]
changes back to it's default setting of 00000001 after a reboot (I want it
to stay at 00000000).
I require this setting off as it is affecting my Dell IT Manager, but it
will not keep it's setting!!!
Any ideas/help would be greatly appreciated!
Chris
Info:
Windows XP SP2
Novell Client 4.91 SP2 English
TCP/IP protocol only
- 3
- Windows XP >> Access WinXP Pro shares from older MS networkI have now been trying to get a box running XP Pro (not joined any domain)
to work in a peer-to-peer network with Win98 and LanMan DOS (network boot
disk).
I understand that MS now have made the peer-to-peer different than earlier,
but I can't really understand in what way. I have been running "Windows XP
Simple File Sharing" and disabled "ForceGuest" in the Reg.database.
So now I am able to share folders like "in the old days" with WinNT Pro and
assign ressources as I am used to.
But... it does not seem to work. When I use a bootdisk (which works up
against a Win2k server) to do a "net use" against the XP Pro, it does not
connect to the XP Pro, but returns an error instead.
If I try to connect (browse via Network Neighbourghood) to the WinXP Pro
from a Win98, it also returns an error. The XP Pro does show up in the
browse list though.
I am accessing with usernames and passwords that are created and granted on
the XP box. What more do I need to do in order to get it working as with
WinNT?
Regards, Lars.
- 4
- Windows XP >> EXCELWhich newsgroup should I subscribe to get information concerning Office
Excel HGPeare
- 5
- Windows XP Support >> Fast User SwitchingI'm lost in trying to figure out why the Fast User Switching (FUS) box
keeps getting "unchecked". (Fast User Switching is located via Control
Panel / User Accounts / Change The Way Users Log On Or Off).
Bottom line is that I am unable to switch users without getting logged
off myself. I also tried to check the FUS box is SAFE MODE, but it
didn't save my changes.
Is it a registry problem or am I missing something. FYI - I have
already disabled Offline Files.
Tks!
P.S. Sorry if my message appears twice...I'm a new registered user and
just getting myself acquainted with this forum.
--
DrB323
- 6
- Windows XP Network >> static ipsI'm tring to connect two machines via a crossover cable.
However, I have DHCP and don't have static ip for each
machine. Can I just simply enter a ip address manually
and get this to work, or am I going to have to get static
ip addresses from my ISP?
Unfortuneately, my ISP doesn't hand out static ip
addresses. Any suggestions, is it free?
- 7
- Windows XP Perform Maintain >> MegaFLOPS and hyper-threadingI have a P4 2.8 w/HT, 1G Ram. Sony VAIO. (PassMark Performance Test)
I am a day trader and work from home. My software - MetaStock runs some
serious calculations and my computer runs it so slowly - so I have been
trying to get the most I can. I just finished formatting and starting clean.
I have run a test that shows a main score average around 330 and a MegaFLOPS
score of 220. I figured this was good but checked on friends and family's
computers and their MegaFLOPS scores were in the 500s and 600s.
Just for fun - I disabled HT in my BIOS. My main score moved up a little to
349 but my MegaFLOPS went balistic and hit 630 - about 400 points.
1) Which score is more important for normal users? ...overall or MegaFLOPS?
2) I run a ton of programs at the same time - mail, music, MetaStock,
internet,etc., should I have HT on or off ?
3) Is it normal that HT would bring down my MegaFLOPS score?
4) Can I improve this?
Thank you so much !!!!!
Steven
- 8
- Windows XP Network >> Bad ping values on Windows XP 64bitHi,
I'm using Windows XP 64bit, runing on AMD Athlon x2 Dual Core Processor,
on top of GA-K8N20Pro-SLI Mother Board.
After several hours of working with my computer, or idling, these results
coming out by pinging 127.0.0.1 (ping 127.0.0.1 -t):
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time=-105ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time=-105ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time=-105ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time=1ms TTL=128
Reply from 127.0.0.1: bytes=32 time=-105ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time=1ms TTL=128
Reply from 127.0.0.1: bytes=32 time=-105ms TTL=128
Reply from 127.0.0.1: bytes=32 time=105ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time=105ms TTL=128
Reply from 127.0.0.1: bytes=32 time=105ms TTL=128
Reply from 127.0.0.1: bytes=32 time=105ms TTL=128
Reply from 127.0.0.1: bytes=32 time=105ms TTL=128
I'm excepting to have <1ms values only.
I'm having troubles to keep connected when playing games online (such as
BF2).
Always disconnected from the server.
When I'm restarting Windows, the problem is disappeared and repeated again
after.
What are those weird values?
Is my TCP/IP stack screwed up?
Is it possible that my network driver or adapter is buggy?
Thanks
- 9
- Windows XP Setup >> Setup is out of memory and cannot continue.I am trying to run an unattendant install of Windows XP Pro and every second
it goes to the setup mode (very first blue screen with Windows XP
Installation at the top â?? before starts coping files) it gives me an error
Setup is out of memory and cannon continue.
Setup cannon continue. Press Enter to exit.
I have the unattendant install running on multiple machines, but it will not
work on
Dell GX110 and Panasonic CF-48. It works just fine on Dell GX1, GX150,
GX200, GX260, GX270, GX280, and D600 and couple others. Can someone help me
decipher this vague error message??? Thanks
- 10
- Windows XP Security >> Cannot access XP shares from Win98XP Pro SP2
Had only user Administrator. After adding user1 can no longer get to the
shares on the XP machine from second machine Win98 and Administrator is now
hidden.
XP asks for password and no password exisitng.
Can anyone help? Please?
- 11
- Windows XP Hardware >> PC shutting downI moved and my PC was working great until the move and now as soon as I
turn it on within 5 minutes it shuts itself off. I have a Dell
Dimension 2350 running Windows XP with service pack 2 if this helps and
I also run PcCillin for virus control. Any suggestions ? I can't keep it
on long enough to do much with it. Thanks for any help. Hugs, Mary B.
--
Mary B
- 12
- Windows XP Support >> System restore xp home doesn't workI recently disabled and reenabled system restore in order to resolve a
spyware issue( Symantec's suggestion which didn't help, although I did
solve the problem).
I have a Dell Computer with XP home, and have tried to use system
restore. Even though there are restore points, system restore won't
work and I get an error message that system restore isn't working.
I looked at the Microsoft troubleshooter, and both task scheduler and
WMI are listed in CMD netstart.
Suggestions for reenabling system restore?
Bruce
- 13
- Windows XP Network >> Workstation Specific Excel ErrorExcel is giving error when trying to save anywhere on my
network. [Your changes could not be saved
to "filename.xls" but were saved to TEMP DOC NAMES
XXXXXXXX. cLOSE THE EXISTING DOCUMENT THEN OPEN TEMP AND
SAVE UNDER NEW name.]
Tech Net suggests user needs Modify / Delete rights. User
indeed has these rights, and can save to network from any
other workstation. PLEASE HELP.....reply to my email if
possible.
- 14
- Windows XP Security >> Sys Restore Error MessageWhen I click on the System Restore Tab in the System
Properties window (from control panel) I get the
following error:
An exception occurred while trying to
run "shell32.dll,Control_RunDLL "C:\WINDOWS\System32
\sysdm.cpl",System"
This error comes up in a box that is titled in the upper
left corner as RUNDLL
Thanks for any help
- 15
- Windows XP Hardware >> monitor brightness and your eyesDoes monitor brightness have a correlation to long-term health of one's eyes
? Is this on a person-by-person basis ? Is it as simple as adjusting to
one's comfort ? Or is it better to try and get used to a brighter (dimmer)
monitor ? Any objective way to measure brightness ?
Thanks.
|
|
|