| End Task notification at shutdown |
|
 |
Index ‹ Windows XP ‹ Windows XP Perform Maintain
|
- Previous
- 1
- Windows XP Setup >> Downloading updates from NetI'm new to this email list and have just bought a new
computer with XP.
When I try to update using Windows Update and going to the
Net, all works well until I come to the license
agreement. At this point, I read the agreement, as much
as any of us does! <VBG>, and it asks me if I agree, but
there is no place to answer...no place to click, nothing.
I just close the window and it tells me I can't install as
I didn't agree to the license info.
There is nothing cruically required of me to update, but I
wanted to add something for the MVP 9.
Is there something I'm missing here? (BTW, I didn't set
up the computer and have very, very little knowledge of
how it all works, so please be very percise, if you can)
Thanks so much for any help...
Emily
- 2
- 3
- Windows XP >> MS Security Update MS04-004Hi Everyone,
Am using XP Home, have IE6, when trying to install MS
Security Update MS04-004Windows, a window message apears
stating: "This update requires Internet Explorer 6.0 to be
installed".
What should I do to install this update?
TIA,
Lorry
- 4
- Windows XP >> XP reference book recommendationsI am looking for a reference book for windows XP. I am reasonably
knowledgeable on windows but the security aspect of XP has me a little
buffaloed. I would like a book that will explain what each setting does and
how security works. Essentially, however I am using XP Pro at home, and what
I want to do is set things up so everyone can use the computer but they have
to go through me (administrator) to install software. Open to all
suggestions. I am in Canada if that makes a difference.
Please not this is cross-posted for maximum coverage.
RD
- 5
- Windows XP Setup >> User AccountI recently changed my .net framework to my computer administrator and my user
account to limited account and when i turn on my computer it only shows my
User account which only has limited access and I can't do anything about it.
How can i change back my .net framework to limited and user back to computer
administrator again?
- 6
- 7
- Windows XP >> Error code 126When I begin to work in my computer, appears to me the
following:
dll("C:/Program Files/BackWeb
Client/6.2.3.66/Program/BackWeb.dll" Error Code 126) and
when Click OK continue working good.
- 8
- Windows XP >> Endless loopafter mobo changeI had XP on a machine for months with no prob... I
upgraded the mobo and processor from 450 mhz to 1.2 ghz,
but cannot get XP to boot now. It is in an "endless loop"
where it flashes an error for a splitsecond saying that a
problem has occurred and windows will be shut down...
If I put old mobo back, all is ok. Have also gotten third
replacement mobo with exact same problem.
How do I get XP back up with upgraded mobo?
- 9
- Windows XP Security >> Administrator Account locked out.I dont have a network administrator.
I am in a stand-alone in a workgroup of computers that share a HSIC on a
Lan.
I'm identified by my computer name and description.
I have 2 user accounts on my ( XP-SP2 ) PC, Administrator/Owner and
Limited/ Guest account ( which basically has no priveleges, rights
whatsoever ).
I somehow f*%k@! up changing the password on my administrator account and
now cannot log on as administrator and not allowed to access any
files/folders.
What is the best solution with the least data loss?
- 10
- Windows XP >> DCOM errorXP SR2
On startup, I get the following Event Viewer error
"The server (xxxxxxxx-xxxx-xxxxx-xxxxxx) did not register with DCOM
within the required timeout."
I get 4-5 of these in a row on each startup with the only difference
being the numbers I have replaced with x's.
- 11
- Windows XP Network >> Linking XP laptop to W2K networkI have a W2k network at home with ICS via a router and cable modem. It
also has a printer server etc. All works well. I have recently been
issued with an XP laptop which is networed to my companies XP network.
At home I can access the internet vis the router and WiFi but can not
see any of the W2k networked PCs. Can any one give a novice guidance
on how I can file share etc with the W2K machines
Thanks
- 12
- Windows XP Support >> Slow BrowersIt takes about 20 seconds for my browers to bring up a page.
I have IE and mozilla and am running ADSL broadband. Had the broadband speed
checked and they said it is runing at the correct speed.
Anyone please have a solution.
- 13
- Windows XP Hardware >> convert USB2.0 to USB1.1I have a USB analyzer which can only capture Data for upto 12Mbit/
s. When I connect a device which has a USB2.0 protocol on it, the USB
Analyzer is not able to catch this information. How can I force one of
my computer ports to work as USB 1.1? Is there a way? Thanks in
advance.
- 14
- Windows XP Hardware >> COMM port not shutting downWin XP Home SP 1 Dell inspiron I5100 2.66G 512 M BCM V.92 56K Modem
Thank you for taking a moment to help me ... I think this question should be
an easy one .. :)
While online, dial-up, the modem or connection goes offline. Then in an
attempt to re-connect, I get the error that the port is in use .. this never
goes away, regardless of how many times I try or periods of 'wait' I provide.
Windows Troubleshooter wanted me to check the settings for PORTS under
Device Manager, but I do not have such a setting there.
How do I reset that port without having to restart the machine, or can I?
If I cannot, what are the likley causes of this so I can try to fix and or
prevent it?
Thank you.
Don
AizA
Tucson, AZ
- 15
|
| Author |
Message |
Bob
|
 Posted: Tue May 04 14:39:41 CDT 2004 |
Top |
Windows XP Perform Maintain >> End Task notification at shutdown
The system is running at a crawl. When I go to shut down
the system(win XP Pro) I get a end task notification for
WND for RNAadmin. Does anyone know what this is and how
to fix it.
Windows XP60
|
| |
|
| |
|
Skip
|
| Posted: Tue May 04 14:39:41 CDT 2004 |
Top |
Windows XP Perform Maintain >> End Task notification at shutdown
RNAadmin (I think it's RNadmin, no?) is a Real Network
(Real Audio, the blue tool in your tray) program.
It's probably stuck on something. Easiest thing to do
here is try to disable it or uninstall it. It's free and
easily downlodable anyway and you won't loose any mp3 or
avi by doing this.
Good luck!
Skip.
|
| |
|
| |
|
| |
|
Index ‹ Windows XP ‹ Windows XP Perform Maintain |
- Next
- 1
- Windows XP Hardware >> my PC is slowerA few days ago, I added a and old slow disk drive to my XP PC, for backups.
Since then I noticed that my PC is slower, and I can hear that old drive
crunching. Is it my imagination? Is XP now using this drive for things?
Thanks.
Talal Itani
- 2
- Windows XP Security >> XP Pro - System2.exeI have just come up with a virus check on the file
system2.exe in Windows\System32\. The file cant be
deleted but it can be renamed making me suspect that it
is not a system file.
The virus type is for spyware "spybot.js"
Has anyone come across this file or able to shed any
light on this?
- 3
- Windows XP Setup >> Clean install of XP - 1. XP setup program hangs 2. XP fails to boHi,
Apologies for the long post but this needs the detail.....
CPU: Athlon XP 1.8Ghz
RAM: 512MB
Old mobo: Leadtek K7N415-DA
New mobo: gigabyte 7VM400AM-RZ
Hi,
I've got a problem that's driving me insane! I'm a fairly experienced PC
builder with a logical and methodical approach to problem solving.....
I'm trying to install a fresh copy of XP pro from bootable CD onto a new HD.
The system I'm rebuilding has been stable for the last year with XP pro
(sp2).
I remove the current HD's (maxtor 160GB IDE and IBM 80GB IDE) and plug in
the new HD (seagate 160GB IDE ATA100). This is set to Primary Master. The
only other IDE device is a Lite-on CDR set to Secondary Master.
I boot the machine, check the BIOS. The new HD is recognised correctly. I
then exit BIOS setup and boot from the bootable XP install CD. XP starts
loading its basic drivers required for the install. It gets to the end of
this process, I get the message "Starting Windows"... the machine hangs at
this point. This means I'm not even getting to the point where you can
partition the drive and start to install windows.
I've performed full Seagate diagnostic on this HD via their seatools
program. It passes.
I've tried the following (one at a time) to try and eliminate the problem:
-Flashed the BIOS
-Reset the BIOS
-Tried all different BIOS settings for the HD
-Used a different XP install CD
-Used a different CD ROM drive
-Used new IDE cables
-Used different RAM
-Unplugged all other cards/devices
-Tried HD as Primary Slave, secondary slave etc.
-Used XP boot floppies
-REPLACED MOBO(!).. with new gigabyte mobo
I have now either replaced or swapped every component except the CPU, the
case and the power supply!
I'm still getting the same problem!
The strangest thing is if I plug my OLD HD's back into this PC then then
machine works perfectly as it always did!
At this point I had an idea.....
I have a second PC (also Athlon XP) running XP pro SP2, currently working
perfectly.
I think: "I'll try installing XP on the new HD via this PC"
I unplugged it's HD's and plug in the new seagate drive (Primary Master). I
use the same XP install CD... boot the machine from CD... Windows installer
starts PERFECTLY on this PC (no hanging). I partition the new HD (NTFS, full
format, 25GB). I leave the rest unpartitioned. I'll fix that up later.
Windows performs a full install perfectly on the HD. I can use XP; the
machine boots from this HD etc etc. All is good. I don't install any
additional apps or drivers. That can wait.
I remove the seagate HD (with the newly installed XP) from the second PC and
place it back in the first PC (set to Primary Master)....
I switch on the machine, perfect POST, BIOS is all good. Windows XP starts
to boot.......then the machine reboots!!!!!
I get the windows XP message: "your machine did not start properly etc......
start normally, use 'safe mode' etc." I select 'Safe mode'.
Windows XP starts to load it's drivers. The last driver it loads is
"mup.sys". It then reboots. This happens everytime the machine attempts to
boot.
Personally I don't think that 'mup.sys' is to blame. I'm no expert but I'd
say the machine is rebooting when it tries to perform the next step after
'mup.sys', whatever that might be?
I've been given the advice to disable 'mup.sys' via the Recovery
Console....but I can't get to the recovery console because my machine hangs
when I boot from the XP install CD!!
To summerise/reiterate:
-My XP install CD works perfectly in my second PC
-My new install of XP on the new HD works perfectly in my second PC
-My XP install CD hangs on install in my first PC
-New install of XP on the new HD fails to boot when used in first PC
-Every component in first PC has been replaced except CPU, CASE, PSU
-Installing old HD's in first PC leads to a perfectly bootable and useable
system
What is driving me mad is that I've tried EVERYTHING except swapping the
CPU. If the CPU was to blame how can it work perfectly with the old HD's
plugged in?!?!?
If anybody can figure out what is going on here then you are brilliant!
After 25+hrs working on it I'm out of ideas! I'm about ready to throw the
lot in the trash and buy a Dell. :)
Thanks,
R.
- 4
- 5
- Windows XP >> How do I retrive backup data from CDRWI have used Windows XP Home Back Up to copy a number of folders to a CDRW
using the incremental backup. I needed to re build my system and now when I
try to restore the folders I get an error message which says "folder is not
accessible. Access is denied".
Can I get my data back?
Tony
- 6
- Windows XP Network >> Win XP Home can't see linux pc in network but win98 can.My Win XP Home Edition could not detect a particular Linux
PC in network neighbourhood but all my otehr colleagues
running Win 98 cam see the specific linux PC in the
network.
Nothing wrong with my network conection. I shared the same
workgroup as those Win98 PC and I can see my company's
other Workgroup and the PCs in those workgroups.
Please help. I will be most appreciative.
- 7
- Windows XP Support >> Error Code 105I'm not sure what happened, but I had to reinstall MOHAA on my new custom
system, and couldn't get it to install ( had imported it from my old
computer--that was not good!). I did a delete from the control panel, but
that didn't work, either. I went to the EA (game manufacturer) website to
see if there was something I did wrong. I had to do a manual delete from the
registry. Now when I try it, I get nothing. The Install Wizard starts up,
but then nothing happens. Once I got a "catastrophic failure" message. I
tried loading other games from different developers and got "Setup is unable
to run a program needed to proceed with the installation. Restart your
system and try again. Error 105" I have no idea as what to do. I tried
restoring to a previous state, but that didn't work. I thought it might be
the DVD/CD drive, but it reads other cds with Emails, pictures, etc. I don't
think it is gaming related, rather something I may have done during the
removal of the MOHAA series that messed up the registry or removed a program
from XP associated with the Install Wizard.
- 8
- Windows XP Support >> Where has my config.sys gone!I need to update my config.sys file to use some old software.
I have recently installed XP Professional upgrade. But now when I search for
my config.sys file i cannot find it. I only need to change two lines.
Files=50 Buffers=10.
How do i do it now? Thanks !
- 9
- 10
- Windows XP Perform Maintain >> Error MessageAfter Startup I get a Message Box that says-Common Language error Fatal
Execution Error (ox7927e03e) Thread ID ox968. I have to click ok on this box
everytime to continue. How do I get rid Of this error Box? Thankyou. It
occured during a system restore. -Monie
- 11
- 12
- Windows XP >> AiOS SoftwareS.O.S freinds. How are you guys. Send me to the right group to correct this
problems. It is being two weeks since, when I turn on the PC window installer
is asking me to install above software. The only new in my PC is IE 7 Beta.
Thanks Very Much
Gabriel
- 13
- Windows XP Perform Maintain >> Microphone ProblemsCan anyone help me???
When I try to start using my microphone for inline gaming
or video chat, it does not work. I have tried going into
control panel, sounds, microphone, pest hardware, but I
keep getting the following message:
Error code 0x80004005
Then when I close this box down another opens with the
following
Windows cannot execute DpvSetup.exe - Use add/remove
program
This is the problem, as DpvSetup is not on my system.
Any ideas anyone
Duncan
- 14
- Windows XP Support >> mouse "sec buton" doesn't works on Star Menu Items.I'm here again giving the group the last exposition what I see about this
pb, just to see if it is posible obtain new aids to fix it. On 12/08/2005 I
did a exposition at 8:52. You can see what I have done. Thanks in advance.
1 .-The problem is only with an user: "my user". Other user works fine.
2 .-When START is hit, the whole group menus fails to display context menus
when "sec. button on mouse is pressed. Now:
I can't drag to change position of a program
I can't delete a program on the list of the 10 selected.
I can't order by name the "All Program List"
Any idea related to this welcolme
José M. Bonías
- 15
- Windows XP >> IPMon32.exeFirst, thank you for helping me with my ?. Everytime I start-up my computer,
I receive the following error - "IPMon32.exe Application Error 0Xcoooo142
Failed to initialize properly. I have Windows XP, SP2. Thanks
--
Terry C.
|
|
|