 |
|
Index ‹ Windows XP ‹ Windows XP Support
|
- Previous
- 1
- 2
- Windows XP Support >> Windows XP SP2 Blue Screen of Death when inserting Kingston USB drI've been experiencing several Blue Screens whenever I insert my Kingston
Datatraveler (DTI/2GB) flash drive into my HP Compaq nc6400 with an Intel
(Centrino) Core Duo 2.00GHZ. I'm running Windows XP SP2. After I insert the
drive, I can access it for a few minutes but after a few minutes my computer
crashes. This is very easy to recreate and it happens all the time.
When my PC recovers, I creates a minidump. I have several minidumps that
I've been piling up.
This is part of one of the minidumps:
========================================
Probably caused by : InCDrec.SYS ( InCDrec+1251 )
Followup: MachineOwner
---------
----- 32 bit Kernel Mini Dump Analysis
DUMP_HEADER32:
MajorVersion 0000000f
MinorVersion 00000a28
KdSecondaryVersion 00000000
DirectoryTableBase 0a5c04c0
PfnDataBase 810a6000
PsLoadedModuleList 8055c700
PsActiveProcessHead 805627b8
MachineImageType 0000014c
NumberProcessors 00000002
BugCheckCode 1000008e
BugCheckParameter1 c0000005
BugCheckParameter2 88f89d12
BugCheckParameter3 aebf97e0
BugCheckParameter4 00000000
PaeEnabled 00000001
KdDebuggerDataBlock 8054c2e0
SecondaryDataState 00000000
ProductType 00000001
SuiteMask 00000110
MiniDumpFields 00000dff
TRIAGE_DUMP32:
ServicePackBuild 00000200
SizeOfDump 00010000
ValidOffset 0000fffc
ContextOffset 00000320
ExceptionOffset 000007d0
MmOffset 00001068
UnloadedDriversOffset 000010a0
PrcbOffset 00001878
ProcessOffset 000024c8
ThreadOffset 00002728
CallStackOffset 00002980
SizeOfCallStack 00000810
DriverListOffset 00003420
DriverCount 000000b6
StringPoolOffset 00006a28
StringPoolSize 00001978
BrokenDriverOffset 00000000
TriageOptions 00000041
TopOfStack aebf97f0
DebuggerDataOffset 00003190
DebuggerDataSize 00000290
DataBlocksOffset 000083a0
DataBlocksCount 00000004
c0000000 - c0000fff at offset 000083e0
88f89000 - 88f89fff at offset 000093e0
aebf9000 - aebf9fff at offset 0000a3e0
877e1000 - 877e1fff at offset 0000b3e0
Max offset c3e0, ac20 from end of file
========================================
I have already tried installing the hotfix described in the following article:
http://support.microsoft.com/default.aspx/kb/900808/en-us
but it didn't do anything.
Any help will be appreciated.
- 3
- Windows XP Update >> Continually being asked to install KB867801After installing KB867801, via Windows Update, I am being
continually prompted to install it again. Once the 1st
installation has been completed Win. U/date tells me that
the installation was successful. On re-booting the
computer and running Win. Update again, I'm being told to
install it again. How can this problem be resolved? Does
anyone have any ideas?
- 4
- 5
- Windows XP Support >> Reversed browse list...?I'm having an issue with my browse list...
Like say I want to upload a mp3 file onto YouSendIt.com. When I click on
the browse button and search for whatever I'm looking for, the list isn't in
A-Z order...the list is backwards, Z-A order. Even if I right-click and
arrange it back to normal order, it always come back the same way after I
close it. I already tried restoring all my folder options back to default
and restored program things back to default, but it still didn't do anything.
I mainly use FireFox as my default browser, but the same thing happens in
Internet Explorer. I'm not sure if I did a certain keyboard combination or
not, but it's really annoying to keep seeing the list in reversed order. Is
there any way this could be fixed? Thank you in advance!
Oh, and here is a picture to show what I'm talking about:
http://img233.imageshack.us/img233/7701/backwardsot8.png
- 6
- Windows XP Setup >> desktop picturesI have all these pictures in my desktop file and would like to know how to
delete them out? It is not the theme file it is the desktop one. How do I
get all the extra pictures that are of no use to me off?
- 7
- Windows XP >> Installation HistoryI have my computer set to download updates automatically,
but I used the Web to download a recent "critical pack" &
when I checked my installation history it showed that
under 'STATUS' nearly every update automatically
downloaded had FAILED, but the one one I downloaded from
the web said SUCCESSFUL. Does this mean that all my
automatic updates are failing to download onto my
computer? If that's the case, why am I using automatic
updates at all? I thought I was keeping my computer up
to date with these automatic downloads.
- 8
- 9
- Windows XP Hardware >> WebcamI have a webcam that cam with my pc (WIN98) With software
already installed. I have reformatted my PC with XP but
the cam doesn't work. Any Ideas ?
- 10
- Windows XP Setup >> Right Click DesktopHello,
After installing 4/06 updates from MS, when I right-click my desktop, my
computer just pauses for 30 seconds - eventually the dialog box shows up.
It never did it before and none of my other computers without the update do
it. It is very annoying and time consuming. Any patches or fixes short of
uninstalling the updates (they won't show up in Add/Remove programs anyway.)
Thanks,
Bob
- 11
- Windows XP Support >> SP2 install copy errors.I am attempting to install SP2 on a XP Pro machine. When I try I get the
following errors.
First, I get a â??Setup cannot copy the file type .wavâ?? error. When I click
on cancel it says it will continue with the setup without coping this file.
I get this error for the next 6 or more files then it continues with the
process.
After sometime I get another Copy Error dialog box. This one says â??An error
occurred while copying file xpmsgr.chm. Cannot copy file to destination
directory.â?? This time when I click on cancel it states that the SP2 install
will cancel and does. During the closing of the process I get another window
stating â??the filename, directory name, or volume label syntax is incorrect.â??
I have tried the following, none which worked.
I ran SFC /scannow. Problem still occurs.
I tried to install in safe mode. No luck.
I disabled Anti-virus programs. Still no luck.
I tried to do the update via Microsoftâ??s website and directly from a SP2 CD.
Same error for both procedures.
I need to get this computer up to date, but canâ??t get past this error.
Any advice or ideas are appreciated.
Thank you in advance.
Frank
- 12
- Windows XP Network >> Remote Access Manager will not StartI upgraded from XP Home to XP Pro today and now the Remote
Access Connection Manager, Remote Access Auto Connection
Manager, and the Internet Connection Manager will not
Start. I receive "Error 5: Access is denied" when trying
to start the RACM and "Error 1068: The dependancy group
failed to start" on the RAACM and the ICF.
- 13
- Windows XP >> Help With Booting XPSome time ago I was asking for help on a mobo upgrade to my PC .. I went from
Intel to AMD and a upgrade to my original disk was suppose to take care of
the HAL files etc. but it never worked. So I installed 2 SATA disks and
preformed a clean install but I left the old IDE disk in to pull data off it.
The problem I have now is .. the IDE disk is C: CDrom is D: and the SATA's
are E: & F: . The system will not boot if I disable the IDE disk ... it tells
me no boot files present or something like that ..... I tried booting off the
cdrom and used the commands to fix the boot sector and install the boot image
...
Any ideas??? also what about the disk labels does it matter if they stay E:
and F: ?? It would probably screw up all the paths in the environment and
probably the Registry correct ??? Can this be fixed ???
Thanks in advance
Dale G.
- 14
- Windows XP Support >> DebuggingHi,
I installed and uninstalled:
- Microsoft .NET Framework 2.0 Software Development Kit (SDK) (x86)
- Microsoft .NET Framework Version 2.0 Redistributable Package (x86)
However, my pc has set as default Visual Studio Just-In-Time Debugger as my
pc's debugger. What setting needs to be changed so that I can set the
original debugger as default.
Yesterday I downloaded Microsoft's debugger, dbg_x86_6.6.03.5, but it hasn't
helped.
What can I do and how do I do it to fix this problem?
Denise
- 15
|
| Author |
Message |
Rupert
|
 Posted: Wed Oct 18 14:11:34 CDT 2006 |
Top |
Windows XP Support >> open up a laptop
Anybody can tell me how to get at the insides of my laptop; I suspect a
loose connection at the PS2 connector.
It's a Dell 7000. Thanx.
Windows XP937
|
| |
|
| |
|
Patrick
|
| Posted: Wed Oct 18 14:11:34 CDT 2006 |
Top |
Windows XP Support >> open up a laptop
"herbzee" <EMail@HideDomain.com> wrote in message
news:UMuZg.5453$IW6.4710@trndny01...
> Anybody can tell me how to get at the insides of my laptop; I suspect a
> loose connection at the PS2 connector.
> It's a Dell 7000. Thanx.
Use the service tag number to try to find service manuals at Dell's site.
These may detail case disassembly.
HTH
-pk
|
| |
|
| |
|
herbzee
|
| Posted: Wed Oct 18 14:17:34 CDT 2006 |
Top |
Windows XP Support >> open up a laptop
"Patrick Keenan" <EMail@HideDomain.com> wrote in message
news:EMail@HideDomain.com...
> "herbzee" <EMail@HideDomain.com> wrote in message
> news:UMuZg.5453$IW6.4710@trndny01...
>> Anybody can tell me how to get at the insides of my laptop; I suspect a
>> loose connection at the PS2 connector.
>> It's a Dell 7000. Thanx.
>
> Use the service tag number to try to find service manuals at Dell's site.
> These may detail case disassembly.
>
> HTH
> -pk
Thanx, I'll give it a shot.
|
| |
|
| |
|
Patrick
|
| Posted: Wed Oct 18 16:12:38 CDT 2006 |
Top |
Windows XP Support >> open up a laptop
"herbzee" <EMail@HideDomain.com> wrote in message
news:i5vZg.1227$cQ5.268@trndny06...
>
> "Patrick Keenan" <EMail@HideDomain.com> wrote in message
> news:EMail@HideDomain.com...
>> "herbzee" <EMail@HideDomain.com> wrote in message
>> news:UMuZg.5453$IW6.4710@trndny01...
>>> Anybody can tell me how to get at the insides of my laptop; I suspect a
>>> loose connection at the PS2 connector.
>>> It's a Dell 7000. Thanx.
>>
>> Use the service tag number to try to find service manuals at Dell's site.
>> These may detail case disassembly.
>>
>> HTH
>> -pk
> Thanx, I'll give it a shot.
You're welcome, but I do have to say that it's also a good way to break a
laptop. Use caution and refer to equipped service persons if at all
doubtful.
HTH
-pk
|
| |
|
| |
|
| |
|
Index ‹ Windows XP ‹ Windows XP Support |
- Next
- 1
- Windows XP Hardware >> USB card reader problemAll of my USB devices are working just fine. When I plug
in my USB card reader, my WindowsXP SP1 detects the name
properly, then error message pops up saying there "was an
error installing this device, the service for this device
is not identified properly." Then it loops it once more
time, as if to detect the card a second time, and the
error message pops up again (this is in the automatic new
hardware setup that XP launches everytime you plug in PNP
device.)
I checked dev. mgr, and sure enough there are two of the
same card reader. There are also two new removable drives
in My Computer. Suprisingly, when I plug in a card for it
to read, the data is read/write just fine.
Please excuse the long message, I just wanted to be as
precise as I can. I was wondering why it won't correctly
detect the card reader. I've also tried buying a
different card reader and it does the same thing. TIA for
any help.
- 2
- Windows XP Hardware >> The best upgrade?I know that conventional wisdom dictates that the easiest PC upgrade
is to increase the size of the memory.
But in my particular case,if I were to do one thing, should I increase
memory to 2GB, replace my old video card (all-in-wonder 9600, no dvi
output) or add a faster (SATA) hard drive?
Details of my system:
2 Corsair 512 MB PC3200 DDR400, Value Select
AMD Athlon 64 3800+, 2.4GHz, 512k Cache, Socket 939
Asus A8V with Audio-GB.LAN-S.ATA RAID (Socket 939) (4 memory sockets)
2 EIDE internal drives
Win XP
- 3
- Windows XP >> User accounts files on old hard drive.I received any error when staring windows that my hard drive was corrupt. I
tried to boot under safe mode all the system files and drivers showed up on
the screen then nothing the computer shut down. When I tried again I
received a smart failure and press f1 to continue. Still I was unable to
boot up using safe mode.
So, I purchased a new hard drive and reinstalled windows XP. I also
purchased a USB hard drive holder. I am able to access all the files on the
hard drive using windows explorer but the ones which was under a user
account. All the shared files are available. Not any files saved to the
desktop or in the My Documents of that user account.
Does anyone know how to gain access to those files. I tryed resetting the
attrib to all files on the old hard drive it did not work.
--
NO SIGNATURE REQUIRED
- 4
- Windows XP Support >> Extra Hard DrivesHello-
I have 2 Extra Hard drives on my computer. They were set-up and installed by
someone else who I can not longer contact.
They were working just fine untill I goofed-up the BIOS or something else,
I'm really not sure where.
The 2 extra hard drives show up in my BIOS but Windows doesn't "See" them.
It's like windows doesn't even know that they are there.
Does anyone know what I might have done? Is there someway to make windows
find them?
My system drive is a Sata drive that works just fine. My 2 extra drives are
pluged into a card in my mother board.
Like I said they were working just fine until I did something in my BIOS. I
may have made the problem worst by goofing around with my "System
Configuration" trying to get windows to "SEE" them.
Help Please.......
Jim
- 5
- Windows XP Hardware >> USB HubI just bought a 4 port external usb hub, its usb2.0 and comes with power
adapter. I plug it into my laptop (it has usb2.0) but nothing is detected, I
have XP pro SP2.
The hub has a blue LED which lights up, so I know it is connected. I
connect my USB flash dive onto the hub and and the light on the flash drive
goes on for 1 second, but my laptop still detects nothing.
I've tried updating all the usb controllers.
Please help
- 6
- 7
- Windows XP Network >> Windows xpe dial up networking problemsHi all,
having started work in the thin client systems arena, i have
encountered a wonderful bug in a large section of the thin clients
being produced - the networking has been cut and slashed to shreds.
my initial problem was simply, trying to install a generic modem driver
in order to attach my wavecom gprs modem. the problem? there is no
generic modem driver on xpe.. there are NO modem drivers. at least not
on this version (this is manufacturer standard incidently, i had
changed no settings by this point)
finally, after battling to get a modem installed, i got one up and
running, setup on com3 without any complaints, conflicts or major
issues. it recognised in the device manager as active and was able to
be used.
upon creating a dial up connection using the windows wizard, it
immediately became unavailable - the error message being "unavailable -
device missing." this was before i got to check or change any settings
on the account. when i checked the properties of the dial up
connection, in the modem field it read "modem removed - missing device
(com 1)"
this, despite there being a functional modem set up on com3.
i then went to the groups and have had no luck finding any solutions to
this problem.. my suspicion is that the networking has not been
installed properly, which would result in a reload of xp. however, this
is not xp, this is xp embedded.. no way i can do a recovery install.
this happens on every unit i've tried so far, so it's not isolated.
in desperation, i followed a microsoft support base articles advice
which had a step requiring the clearing of the autodiscovery/autopurge
information in the registry, which landed up in a unit bluescreening on
boot! the exact stop message being 0x0000007f (faulty drivers - always
a possibility, though i haven't done any driver installations beyond
the modem, overclocking - not possible as none had been done, or faulty
components - unlikely due to it occuring after a software change)
so, i'm one thin client pc less, and no joy yet. my apologies for the
long post, but i wanted to detail the fact that i have taken steps to
resolve this without joy, including having a look at many posts on the
board.
further information -
modem is external wavecom fastrack gprs radio
have connected to com1 with no joy (modem detects, dun doesn't)
have connected to com3 via a usb to rs232 converter with no joy (modem
detects, dun doesn't)
have connected the modem to a pc, running xp sp2 and it connects
perfectly.
tried to create a pppoe connection, but it yields the same problem
(unavailable device on com1)
have checked registry entries in telephony, searched for entries
containing modem com port.
have used the gpe to check the default internet connection settings
ensured that the appropriate services were running.
ensured that tcpip connections were working on the onboard lan
anything beyond this is beyond me.
help!
Regards,
Kaleem
- 8
- Windows XP Hardware >> driver problemsim trying to install a realtek rtl8139/810x family fast
ethernet nic but every time i get the message "the
ndis.vxd,ntkern.vxd device loader[s] for this device could
not load the device driver {code 2]" im running win 98.
when told to update driver am told the best driver is
already installed warning ! is next to this device in
device manager
- 9
- Windows XP Basic >> Yahoo images won't show....I think I figured out why my yahoo images (mail, search, etc icons) won't
show. The browsers (Firefox, IE6) won't connect to
http://us.i1.yimg.com/us.yimg.com. I've tried allowing them to show the
pop-ups in the Tools>options>content> allowed sites, but still I can't see
the images.
Any ideas why this doesn't work on the desktop pc, but works fine with the
laptop, even though both pc's use winxp sp2?
Thanks
- 10
- Windows XP >> unable to double click?Within the last week I've had about 5 systems that are having this problem.
They are unable to double click on My documents folder on the desktop and
also unable to double click on any zip files. Only way around it is to go to
explorer and open winzip to open the zip files. If any body has come across
this let me know, its annoying and I don't want to re-image systems due to
this.
Thanks,
Dax
- 11
- Windows XP >> Windows drag too slow and leave trailsI was having erratic operation and error messages at
various times when using XP Home, so I decided to reload
a fresh copy, after formatting the C: partition.
Everything seems to be OK now except there is an annoying
problem when I drag any window.
When dragging a window the window does not stay up with
the pointer, it lags behind and leaves shadows than
catches up when I stop the pointer where I want the
window. It's acting like a pointer would act if pointer
trails were turned on to the max. I reloaded windows
twice and same thing. A fix would be greatly
appreciated, if anyone knows.
- 12
- Windows XP >> folder-file tasks in explorerMy folders are messed up... My Pictures shows "music
tasks" instead of "picture tasks" in the left pane.
Program Files shows "picture tasks" instead of "system
tasks" in the left pane. This is bad, because now I can't
get Program Files to become hidden again (the option
to "hide this folder" is only available in the system
tasks area of the left pane... ie) picture tasks
(slideshow, etc) has replaced system tasks
thx for your help
- 13
- Windows XP Perform Maintain >> My IE Shuts Down w/ no WarningHello,
When I do things such as go to websites like
www.fandango.com or run virtual tours on www.realtor.com
my IE (ver 6.x) crashes. No error message, it just
closes down. Does anyone know of some download I can get
to correct this problem? I use WinXP Pro. So it seems
IE is when running websites having some sort of
embedded video routine. Am I missing some sort of
decoder? I have never had this problem
until maybe 6 months ago. I otherwise have no problem
running video files on, for example, Media Player.
Thank you
Mike
- 14
- Windows XP Network >> Network problems after window update KB832483I have 2 home computers and a laptop all networked with a
hub and cat5 cables. The main computer which connects
directly to the internet is running XPhome, as is the
laptop, the other PC is running XP Professional. I have
had no network problems for months until I recently
installed SP1 from the Microsoft site. After
installation tbe internet connection could not be shared
and files on the computers could not be shared. I
uninstalled SP1 and the problem was resolved. I
immediately got an Automatic Windows Update notification
for KB832483 (Security Update for Microsoft Data Access
Components). Being wary, I created a restor point before
installing the update the next day. Once again, the
internet connection cannot be shared and only files
between the 2nd PC which doesn't connect directly to the
internet and the laptop can be shared. I tried system
restore but it won't let me restore to any point before
the update was installed. Can anyone offer anything to
try?
|
|
|