| Cannot enable screensaver - XP |
|
 |
Index ‹ Windows XP ‹ Windows XP Support
|
- Previous
- 1
- Windows XP >> Desperately need help with no-boot problem.(I apologize for the cross post: pretty desperate here)
Hi!
I ran into some trouble yesterday. I rebooted my machine after
installing a program (disclaimer, I have no idea if the new program is
to blame since the machine has been running for a while - in fact, I
suspect the new application has nothing to do with this) and it freezes
at the WindowsXP Welcome screen (with the white status indicator at the
bottom).
The system is WindowsXP Home, SP1.
Pentium IV 1.8GHZ
Asus P4PE
Lot's of hardware (2 TV tuners, PCI Serical Port card, Modem, ATI AIW
7500, ebcam, NIC, Sound)
I'm pretty sure the freeze occurs when a piece of hardware gets touched.
I can boot to Safe mode. VGA mode won't load.
Here's what I've tried:
- Restoring the system to a known good config. No good.
- Obviously rebooting in different modes, etc., turned the machne off
for the night. No good.
- Used the Repair tool on the WindowsXP disk, i.e., went through the
entire setup and reinstalled all drivers. No good. (note: the machine
froze twice while installing devices. I removed the modem, serial port
card and disabled the onboard network and sounds cards and it finished
the setup, but it still freezes on normal boot, even without those items
installed).
- Removed all uneccesary hardware. No good.
- Wanted to remove the possibly offending piece of software, but no
uninstall program, not even listed under Remove Application in Control
Panel.
I'm pretty much at a loss here. It will literally take me days to set
this system up again. It's an HTPC with so much lovinh tender care it
will break my heart to have to start over. *ANY* help aon other things
to try is welcome.
THANKS IN ADVANCE
Here's a sample of a failed boot listing log from \windows\ntbtlog.txt:
Service Pack 112 28 2003 17:51:08.500
Loaded driver \WINDOWS\system32\ntoskrnl.exe
Loaded driver \WINDOWS\system32\hal.dll
Loaded driver \WINDOWS\system32\KDCOM.DLL
Loaded driver \WINDOWS\system32\BOOTVID.dll
Loaded driver ACPI.sys
Loaded driver \WINDOWS\System32\DRIVERS\WMILIB.SYS
Loaded driver pci.sys
Loaded driver isapnp.sys
Loaded driver ohci1394.sys
Loaded driver \WINDOWS\System32\DRIVERS\1394BUS.SYS
Loaded driver PCIIde.sys
Loaded driver \WINDOWS\System32\Drivers\PCIIDEX.SYS
Loaded driver intelide.sys
Loaded driver MountMgr.sys
Loaded driver ftdisk.sys
Loaded driver IdeBusDr.sys
Loaded driver PartMgr.sys
Loaded driver siside.sys
Loaded driver VolSnap.sys
Loaded driver atapi.sys
Loaded driver IdeChnDr.sys
Loaded driver disk.sys
Loaded driver \WINDOWS\System32\DRIVERS\CLASSPNP.SYS
Loaded driver sr.sys
Loaded driver KSecDD.sys
Loaded driver Ntfs.sys
Loaded driver NDIS.sys
Loaded driver sisperf.sys
Loaded driver sisidex.sys
Loaded driver SISAGPX.sys
Loaded driver Mup.sys
Loaded driver agp440.sys
Did not load driver Advanced Configuration and Power Interface (ACPI) PC
Did not load driver Audio Codecs
Did not load driver Legacy Audio Drivers
Did not load driver Media Control Devices
Did not load driver Legacy Video Capture Devices
Did not load driver Video Codecs
Did not load driver WAN Miniport (L2TP)
Did not load driver WAN Miniport (IP)
Did not load driver WAN Miniport (PPPOE)
Did not load driver WAN Miniport (PPTP)
Did not load driver Packet Scheduler Miniport
Did not load driver Packet Scheduler Miniport
Did not load driver Packet Scheduler Miniport
Did not load driver Packet Scheduler Miniport
Did not load driver Packet Scheduler Miniport
Did not load driver Packet Scheduler Miniport
Did not load driver Packet Scheduler Miniport
Did not load driver Direct Parallel
Did not load driver Audio Codecs
Did not load driver Legacy Audio Drivers
Did not load driver Media Control Devices
Did not load driver Legacy Video Capture Devices
Did not load driver Video Codecs
Did not load driver WAN Miniport (L2TP)
Did not load driver WAN Miniport (IP)
Did not load driver WAN Miniport (PPPOE)
Did not load driver WAN Miniport (PPTP)
Did not load driver Packet Scheduler Miniport
- 2
- 3
- Windows XP Security >> USER PROFILE SIZEI HAVE A TOSHIBA LAPTOP RUNNING XP PROFESSIONAL. MY USER
PROFILE IS NOW 2.72GB IN SIZE AND GROWING. IT STARTS AT A
REASONABLE SIZE, I.E. 700KB BUT WITHIN WEEKS/MONTHS GROW
TO A VERY LARGE SIZE. ANY IDEAS WHY AND HOW TO STOP IT.
- 4
- Windows XP >> Trouble with Windows InstallerI had a weird thing happen...I suddenly lost all evidence of my Office
components-Word, Publisher, Excell, Outlook, and Powerpoint. I can click on
a document and it will open in the program, but I can't launch the program
because they're gone from the program menu. My solution was to re-install
the programs. But lo and behold, when I try to re-install I get this message
"Windows Installer- This patch package could not be opened. Verify that the
patch package exists and that you can access it, or contact the application
vendor to verifythat this is a valid windows installer patch package." The
only patches I know of come from my Microsoft Updates. What gives?
- 5
- 6
- 7
- 8
- Windows XP >> siwvidi jest installed softice driverSuite 2.7 on my pc and now
when i turn on my pc it goes staight to loading in
siwvid. i have to hold down esc. to get it to load. what
is siwvid and how do i stop it from loading in start up
it is not found in msconfig. please email me at:
r_mcgrady25@earthlink.net if you can help me in any way.
Thank you very much,
Rick Mcgrady
- 9
- Windows XP Support >> Chinese verson XP change to englishI just started working in China. I was just supplied with an IBM R52 laptop.
The laptop has a Chinese version of windows, and unfortuneatly I can not read
chinese. All of the menus etc are in chinese.
Is it possible to switch the language for XP? Can anyone suggest how I go
about resolving this issue?
Thank you very much,
Ed
- 10
- Windows XP Hardware >> External HD never shows upI've got a WD My Book external drive. I used it for about a month.
Now suddenly it will not show up. I have two boot systems, each one
on a separate itnernal HD. the External USB drive will not show up on
either of them. I'm using XP Home SP2 + patches.
I thought Western Digital made good products. I thought USB Hard
Drives were good choices for backing up. Apparently I was wrong. I'm
really frustrated.
`
Lady Dungeness
Crabby, but Delicious!
~~~~~~~~~~~~~~~~~~~~~~
- 11
- Windows XP Support >> Menu item lostAfter move my documents to another place, 2 my pictures and 2 my music exists
in the same folder, i deleted one of each. and then my music and my pictures
links were lost in the start menu.
Meanwhile, in the explorer view, the link to my document is also diappered
in the other place menu.
Any one could do me a favor?
- 12
- Windows XP >> Networking issue....I have a router that I successfully config to share internet with my cable
modem with Win XP Home and Win 98. However, I can't config the two machines
to share files. Any suggestions on a quick way to network these two
computers. Secondly, do I need additional software so the XP and 98 can
share files? I heard it can be done with the software built-in XP Home, but
the help section is not much help because I can't get it to work.
I'm open for suggestions....
- 13
- Windows XP Setup >> Changing the user name in "Documents and Settings\[user]"Hello,
The guy that set up my XP computer (a surprise from my wife, bless her
heart) spelled my name wrong on the user account name. I changed it there,
but it creates a misspelled path name. That's easily changed, as well, but I
wondered if there are any unseen repercussions from doing so? Will any
programs not work because they are looking for "Jim Spieser\My Documents"
instead of "Jim Speiser\My Documents"? Will I have to make changes all over
the place? Am I better off just leaving it?
Thanks,
Jim Speiser (not Spieser)
- 14
- 15
- Windows XP Setup >> Windows XP SP1 Security update supportGartner is tell their customers that Microsoft is dropping security update
support for Windows XP SP1 on 10/10/2006. Is this true. They told us that
we will not be able to get the security patch for SP1 and must upgrade to SP2
or pay Microsoft extra for being able to download security patches for SP1.
We are a large company and it's almost impossible to upgrade all.
Where can I find support dates for Windows XP?
|
| Author |
Message |
Bruce
|
 Posted: Tue Aug 22 04:13:30 CDT 2006 |
Top |
Windows XP Support >> Cannot enable screensaver - XP
In the ScreenSaver tab in Display Properties the ScreenSaver drop down list
is greyed out. I have several .scr files in the windows\system32 folder and
I have Administrator rights. How can I enable the screensaver ?
Thankful for any help!
Windows XP578
|
| |
|
| |
|
Will
|
| Posted: Tue Aug 22 04:13:30 CDT 2006 |
Top |
Windows XP Support >> Cannot enable screensaver - XP
Hi
Do the screensavers work by right clicking on them and then selecting
'Test'?
--
Will Denny
MS-MVP Windows Shell/User
Please reply to the News Groups
"Tomm" <EMail@HideDomain.com> wrote in message
news:EMail@HideDomain.com...
> In the ScreenSaver tab in Display Properties the ScreenSaver drop down
> list
> is greyed out. I have several .scr files in the windows\system32 folder
> and
> I have Administrator rights. How can I enable the screensaver ?
>
> Thankful for any help!
>
>
|
| |
|
| |
|
Tomm
|
| Posted: Tue Aug 22 05:23:02 CDT 2006 |
Top |
Windows XP Support >> Cannot enable screensaver - XP
Yes, all of them are working when selecting and testing directly from explorer.
I also tried to install a new screensaver today following the exact
instrucitons. I t shows up in same folder on system, but still not possible
to enable it.
"Will Denny" wrote:
> Hi
>
> Do the screensavers work by right clicking on them and then selecting
> 'Test'?
>
> --
>
>
> Will Denny
> MS-MVP Windows Shell/User
> Please reply to the News Groups
>
> "Tomm" <EMail@HideDomain.com> wrote in message
> news:EMail@HideDomain.com...
> > In the ScreenSaver tab in Display Properties the ScreenSaver drop down
> > list
> > is greyed out. I have several .scr files in the windows\system32 folder
> > and
> > I have Administrator rights. How can I enable the screensaver ?
> >
> > Thankful for any help!
> >
> >
>
>
>
|
| |
|
| |
|
Will
|
| Posted: Tue Aug 22 06:07:16 CDT 2006 |
Top |
Windows XP Support >> Cannot enable screensaver - XP
Hi
Try a System Restore back to a point before the problem started.
--
Will Denny
MS-MVP Windows Shell/User
Please reply to the News Groups
"Tomm" <EMail@HideDomain.com> wrote in message
news:EMail@HideDomain.com...
> Yes, all of them are working when selecting and testing directly from
> explorer.
> I also tried to install a new screensaver today following the exact
> instrucitons. I t shows up in same folder on system, but still not
> possible
> to enable it.
>
> "Will Denny" wrote:
>
>> Hi
>>
>> Do the screensavers work by right clicking on them and then selecting
>> 'Test'?
>>
>> --
>>
>>
>> Will Denny
>> MS-MVP Windows Shell/User
>> Please reply to the News Groups
>>
>> "Tomm" <EMail@HideDomain.com> wrote in message
>> news:EMail@HideDomain.com...
>> > In the ScreenSaver tab in Display Properties the ScreenSaver drop down
>> > list
>> > is greyed out. I have several .scr files in the windows\system32
>> > folder
>> > and
>> > I have Administrator rights. How can I enable the screensaver ?
>> >
>> > Thankful for any help!
>> >
>> >
>>
>>
>>
|
| |
|
| |
|
WTC
|
| Posted: Tue Aug 22 12:25:23 CDT 2006 |
Top |
Windows XP Support >> Cannot enable screensaver - XP
"Tomm" <EMail@HideDomain.com> wrote in message
news:EMail@HideDomain.com...
> In the ScreenSaver tab in Display Properties the ScreenSaver drop down
> list
> is greyed out. I have several .scr files in the windows\system32 folder
> and
> I have Administrator rights. How can I enable the screensaver ?
Edit the registry at the following locations, if applicable.
[HKCU\Software\Policies\Microsoft\Windows\Control Panel\Desktop]
Value Name: ScreenSaveActive
Data type: REG_SZ
Delete "ScreenSaveActive".
[HKLM\Software\Policies\Microsoft\Windows\Control Panel\Desktop]
Value Name: ScreenSaveActive
Data type: REG_SZ
Delete "ScreenSaveActive".
[HKCU\Software\Policies\Microsoft\Windows\Control Panel\Desktop]
Value Name: SCRNSAVE.EXE
Data type: REG_SZ
Delete "SCRNSAVE.EXE".
[HKLM\Software\Policies\Microsoft\Windows\Control Panel\Desktop]
Value Name: SCRNSAVE.EXE
Data type: REG_SZ
Delete "SCRNSAVE.EXE".
If you are unsure about editing the registry then please download the file
to desktop and *merge* (right click "ScrnSvr_Unrstrct.reg" and select Merge)
the following registration file.
http://www.lprf.ca/files/ScrnSvr_Unrstrct.reg
--
William Crawford
MS-MVP Windows Shell/User
|
| |
|
| |
|
Wesley
|
| Posted: Tue Aug 22 15:11:03 CDT 2006 |
Top |
Windows XP Support >> Cannot enable screensaver - XP
> In the ScreenSaver tab in Display Properties the ScreenSaver drop down
> list is greyed out.
Visit here...
http://www.kellys-korner-xp.com/xp_tweaks.htm
Read the instructions at the top.
Scroll down to...
232. Lift Screen Saver Restrictions - Admin
screensaverestrictions.reg is the file that you want.
[[To use the Regedits: Save the REG File to your hard disk. Double click it
and answer yes to the import prompt. ]]
ScreenSaveActive
[[Enables desktop screen savers. If you disable this setting, screen savers
do not run. Also, this setting disables the Screen Saver section of the
Screen Saver tab in Display in Control Panel. As a result, users cannot
change the screen saver options. ]]
--
Hope this helps. Let us know.
Wes
MS-MVP Windows Shell/User
In news:EMail@HideDomain.com,
Tomm <EMail@HideDomain.com> hunted and pecked:
> Yes, all of them are working when selecting and testing directly from
> explorer. I also tried to install a new screensaver today following the
> exact instrucitons. I t shows up in same folder on system, but still not
> possible to enable it.
>
> "Will Denny" wrote:
>
>> Hi
>>
>> Do the screensavers work by right clicking on them and then selecting
>> 'Test'?
>>
>> --
>>
>>
>> Will Denny
>> MS-MVP Windows Shell/User
>> Please reply to the News Groups
>>
>> "Tomm" <EMail@HideDomain.com> wrote in message
>> news:EMail@HideDomain.com...
>>> In the ScreenSaver tab in Display Properties the ScreenSaver drop down
>>> list
>>> is greyed out. I have several .scr files in the windows\system32 folder
>>> and
>>> I have Administrator rights. How can I enable the screensaver ?
>>>
>>> Thankful for any help!
|
| |
|
| |
|
Tomm
|
| Posted: Thu Aug 24 03:12:02 CDT 2006 |
Top |
Windows XP Support >> Cannot enable screensaver - XP
Thanks guys deleting the entry
[HKCU\Software\Policies\Microsoft\Windows\Control Panel\Desktop]
Value Name: SCRNSAVE.EXE
Data type: REG_SZ
Delete "SCRNSAVE.EXE".
did it. The other entries mentioned were not in the registry to begin with.
Thanks a lot !
/Tomm
"WTC" wrote:
> "Tomm" <EMail@HideDomain.com> wrote in message
> news:EMail@HideDomain.com...
> > In the ScreenSaver tab in Display Properties the ScreenSaver drop down
> > list
> > is greyed out. I have several .scr files in the windows\system32 folder
> > and
> > I have Administrator rights. How can I enable the screensaver ?
>
> Edit the registry at the following locations, if applicable.
>
> [HKCU\Software\Policies\Microsoft\Windows\Control Panel\Desktop]
> Value Name: ScreenSaveActive
> Data type: REG_SZ
> Delete "ScreenSaveActive".
>
> [HKLM\Software\Policies\Microsoft\Windows\Control Panel\Desktop]
> Value Name: ScreenSaveActive
> Data type: REG_SZ
> Delete "ScreenSaveActive".
>
> [HKCU\Software\Policies\Microsoft\Windows\Control Panel\Desktop]
> Value Name: SCRNSAVE.EXE
> Data type: REG_SZ
> Delete "SCRNSAVE.EXE".
>
> [HKLM\Software\Policies\Microsoft\Windows\Control Panel\Desktop]
> Value Name: SCRNSAVE.EXE
> Data type: REG_SZ
> Delete "SCRNSAVE.EXE".
>
> If you are unsure about editing the registry then please download the file
> to desktop and *merge* (right click "ScrnSvr_Unrstrct.reg" and select Merge)
> the following registration file.
>
> http://www.lprf.ca/files/ScrnSvr_Unrstrct.reg
>
> --
> William Crawford
> MS-MVP Windows Shell/User
>
>
>
|
| |
|
| |
|
WTC
|
| Posted: Thu Aug 24 11:53:39 CDT 2006 |
Top |
Windows XP Support >> Cannot enable screensaver - XP
You're welcome.
--
William Crawford
MS-MVP Windows Shell/User
"Tomm" <EMail@HideDomain.com> wrote in message
news:EMail@HideDomain.com...
> Thanks guys deleting the entry
>
> [HKCU\Software\Policies\Microsoft\Windows\Control Panel\Desktop]
> Value Name: SCRNSAVE.EXE
> Data type: REG_SZ
> Delete "SCRNSAVE.EXE".
>
> did it. The other entries mentioned were not in the registry to begin
> with.
>
> Thanks a lot !
>
> /Tomm
>
> "WTC" wrote:
>
>> "Tomm" <EMail@HideDomain.com> wrote in message
>> news:EMail@HideDomain.com...
>> > In the ScreenSaver tab in Display Properties the ScreenSaver drop down
>> > list
>> > is greyed out. I have several .scr files in the windows\system32
>> > folder
>> > and
>> > I have Administrator rights. How can I enable the screensaver ?
>>
>> Edit the registry at the following locations, if applicable.
>>
>> [HKCU\Software\Policies\Microsoft\Windows\Control Panel\Desktop]
>> Value Name: ScreenSaveActive
>> Data type: REG_SZ
>> Delete "ScreenSaveActive".
>>
>> [HKLM\Software\Policies\Microsoft\Windows\Control Panel\Desktop]
>> Value Name: ScreenSaveActive
>> Data type: REG_SZ
>> Delete "ScreenSaveActive".
>>
>> [HKCU\Software\Policies\Microsoft\Windows\Control Panel\Desktop]
>> Value Name: SCRNSAVE.EXE
>> Data type: REG_SZ
>> Delete "SCRNSAVE.EXE".
>>
>> [HKLM\Software\Policies\Microsoft\Windows\Control Panel\Desktop]
>> Value Name: SCRNSAVE.EXE
>> Data type: REG_SZ
>> Delete "SCRNSAVE.EXE".
>>
>> If you are unsure about editing the registry then please download the
>> file
>> to desktop and *merge* (right click "ScrnSvr_Unrstrct.reg" and select
>> Merge)
>> the following registration file.
>>
>> http://www.lprf.ca/files/ScrnSvr_Unrstrct.reg
>>
>> --
>> William Crawford
>> MS-MVP Windows Shell/User
>>
>>
>>
|
| |
|
| |
|
| |
|
Index ‹ Windows XP ‹ Windows XP Support |
- Next
- 1
- 2
- Windows XP MovieMaker >> Screen Capture QualitySo if I am editing a DV-AVI that has a resolution of 720 x 480, how come
when I do frame capture in MM2 it captures a measly 320x240 resolution? Is
there a way to capture at a higher resolution?
Thanks,
Curt.
- 3
- Windows XP Setup >> asus a7v8x me to xp pro upgradeI get a blocking error that says my motherboard is
incompaitble with my video card. I have tried to upgrade
using ATI Radeon 9000 AGP, GeForce 2 MX 400 PCI, and S3
Stealth III, and get same error messages.
Is there a BIOS setting that I need to change to get rid
of this error possibly? Installing without upgrade works
fine, but I prefer to keep all my programs.
Thanks!
- 4
- 5
- Windows XP >> very slow(almost none) performance from windows explorerI had some spyware/adware and a few virus that cleaned off
my machine with Lavasoft Adware and Norton antivirus. After
the removal the spyware/adware and the viruses, my system
still runs very slow. When I try to open my computer it
takes several minutes for it to open. Normally just a few
seconds. Same problem with control panel and internet
explorer.
What can I do to repair/fix windows explorer?
thanks for any help
darron
- 6
- Windows XP >> Lost Word, Excel, Access, PowerpointHello, Recently I had a Windows Installer problem and got help from this
forum to install the Windows Installer cleanup utility. Upon reading about
it, it confirmed that running the process won't delete progress, rather it
will delete the installer configurations(?) from the program. I ran this
process and it worked, the error message I kept getting disappeared.
I have just noticed that I have lost Word, Excel, Powerpoint, Access,
Outlook. I get the message 'this action is only valid for products that are
installed' when I click on the program from the start menu.
I still seem to have all the other programs, it is just these Microsoft
programs I am missing. How do I reinstall them, can I just reinstall those
programs only from my Windows XP Professional disc? Or do I have to do a full
back up and restore all files and programs before I do this?
Thank you in advance.
- 7
- Windows XP Setup >> Acronis VS symantec ghostHi,
I have been trialling Acronis recently as an imaging and image deploy
software, but wondering what others opinions is on this or do people
recommend symantec ghost or something else?
Ideally I want the software to be cheap and easy to install and
maintain.
Any advice is appreciated.
- 8
- Windows XP Support >> Some programs won't startRecently, programs have refused to start when clicking on their icons.
When I double click, either nothing happens or the program's window
opens for a millisecond and closes again. CTRL-ALT-DEL shows a window
with no programs running, so they are not running invisible somehow. If
I go to the Command Prompt (DOS?) and navigate to the program's
directory and type in the command string (found in the "Properties"
window of the Windows icon) to start the program, it starts - in
Windows - as it should.
Two programs specifically that do this are ACDSee 4.0 and Epsilon 9.0.
Others have behaved the same way but I just can't remember them
specifically.
I have another XP system and these same programs start fine from
Windows - so there is a setting wrong on the first computer. I just
can't figure out what.
S. Howard
--
howpix
- 9
- Windows XP Basic >> Problem with Start/Programs WindowI have xpsp2 home edition. When I click start and point to programs, the
programs window is truncating (i.e. chopping off) the last entry (i.e. it is
below the damn screen border of my pc). There is just enough of it to get a
pointer to it,which will put up the little yellow labeling window.
How can I get the window to either raise itself up (there is a little space
above the top - less than a half an inch), or expand itself into another
column. Right now it displays two columns and they are full, and the last
entry in the right column is truncated.
I hope you see what I am getting at. If not write back and ask for more
info. I tried to explain it the best I could. If I added a new program, I
would think it would automatically add a third column, but I don't have
anything to add right now :-) . Thanks...Pete
- 10
- 11
- Windows XP Hardware >> Strangeneww with new USB key and password/mouse comboHi,
I have XP Pro and have used a normal kb and mouse.
I decided to buy a USB MS fingerprint/mouse combo and a USB MS kb. I also have
a USB2 PCI card.
Now when I cold boot, it stays at the MS XP choice black screen after the bios
and doesn't act to the kboured or mouse.
It is not until I re connect the old mouse and old PS2 kb that it gets past
this screen and loads XP. I can then take them off and use the USB ones.
This seems rather a crazy way to do it and MS could not have this in plan.
So, what am I doing wrong to have this happen.
Thanks
Rock
- 12
- Windows XP >> xp and old office questionI bought an old unopened version office95 years ago and now my son needs a
word processor on his pc. He doesn't have an internet connection so download
abiword or open office isn't a solution. I was wondering if I could load the
office 95 (or just word) on his xp machine ??
thanks
- 13
- Windows XP >> Lost data on second hddI just reformatted my hard drive and now I cant access my
second hard drive which is where 3 years of work,
downloading, game saves, photos and everything else ive
gathered up is. When I double click the drive is
says "disk not formatted" then "would you like to format
now".
Please could someone tell me how to get to the files on
this drive again. It was called "back up" now its
labelled "F". There must be a way to get my files back,
please help.
I installed partition magic 7 and it can see the drive as
it was, named "back up" and the size etc is correct. I
had linux installed on this drive too maybe thats whats
causing the trouble.
Thanks for any help.
- 14
- Windows XP Hardware >> Driver enabled but not yet startedNo sound after installing XP SP2. uninstalled, reinstalled. After searching
the net this seems to be a common problem I was directed to the plug & play
software emulator under system devices. It has the error message Windows
cannot load driver driver code 31. This I also uninstalled and reinstalled.
also tried a fix I found that involved deleting a line from allmachine. did
not work. So I did a clean install of XP yeah sound. Tried SP2 again once
again no sound and the same error messages. Contacted micosoft (useless) All
drivers are updated and XP Compliant. Everything points 2 the software
emulator (developed by microsoft) would greatly aprreciate some advice I have
a couple of programs that require the SP2 patch.
- 15
- Windows XP MovieMaker >> My 6 min. movie wont save!My 6 minute movie of me playing knee hockey wont save! I go into save to my
computer, then save to broadband and then it says I have about 3 million
minutes untill it gets done. Will sum 1 help ?!?!?!?!?!?
|
|
|