| how to get mpeg thumbnails back |
|
 |
Index ‹ Windows XP ‹ Windows XP
|
- Previous
- 1
- Windows XP >> Opposite of blaster!My clean install of WinXP Pro is 1 month old, but now I
cannot logoff or restart (opposite of blaster problem)!
When I select logoff or restart, the PC ignores me, so I
am forced to a hardware reset. I can wait over one hour
to prove it is not slow, it is ignoring my request to
logoff/restart.
- 2
- Windows XP Basic >> Drive E stuckHi yall
I just have a question, How can I fix my drive e? I try to open it but it
will not open the door is stuck, there is no cd the door is just stuck.
Please help me lol. Thanks and have a great day!
- 3
- Windows XP >> SVCHOST.EXE chews up CPU timeI'm getting the same 100% CPU usage as many people are. I looked at articles
314056 and 916089 (describing the hotfix). When I called MS Tech support
they were not aware of any hotfix for this problem. The "resolution" area of
916089 clearly states there's a fix .... albeit new and improved.
Can anyone share the new hotfix number, so I can help the Tech Support folks
help me?
Thanks.
Kim
- 4
- Windows XP Support >> Problem with Play Videos in Web PagesUnable to play videos in web pages. When I go to Tools, Internet Options,
Multimedia there is not a check box to tick (or the actual heading) to Play
Videos in Web Pages. I have contacted HP Help by email, and have done all
they suggested to resolve the problem. They now recommend System restore.
Instead of doing System restore, If I UPGRADED from Windows XP to Vista would
it be likely that I would still have the same problem?
- 5
- Windows XP >> WinampHi,
I've been having problems with my Winamp player. I try to
open it and an error message pops up "Winamp3 has
encountered a problem and needs to close..."
I uninstalled winamp the last time it happened and
reinstalled it....but now this problem is occuring again.
Any idea of what is wrong or how i can fix it?
-Emily
- 6
- 7
- Windows XP >> WHJERE DO I FIND THE MONITOR TO UNINSTALL IN DEVICE MGRI ASKED A QUESTION AND THIS WAS THE RIGHT ANSWER I THINK EXXCEPT HE NEVER
CAME BACK AND TOLD ME EXACTLY WHATY TO INSTALL TO GET RID OF THE OLD MOTINTOR
DRIVERS (DELL 27" LCD) and make way for the gateway 19" stuff so that i could
log in without always being in safe mode
When you boot into Safe Mode, you do not use your systems video adapter in
other than SVGA mode (basic Windows Video Driver).
I believe the same with your monitor. Do you have the old monitor still and
have you tried to hook it back up?
Have you tried to uninstall the Monitor under Control Panel | System |
Hardware | Device Manager (in Safe Mode), reboot and see if Windows tries to
detect the new hardware?
Did you get any software for your monitor that you needed to load ... and
if, so did you check if there where any updates on the Manufacturers
web-site (not Windows ... a lot of times there driver updates for hardware
manufacturers is out-of-date)?
"Jill" <Jill@discussions.microsoft.com> wrote in message
news:F7855B04-D841-44CB-9E03-AEA7E6090B87@microsoft.com...
> TWO ISSUES REALLY first is I can log into windows (I have nedia center
> edition) in safe mode only ...if I am not in safe mode then I get to where
> I
> can pick my name to log in under my name and it's like it freezes i click
> on
> it and nothing happens then the computer beeps and its locked and the
> mouse
> wont budge. even on the ones with no password required ..same thing ..io
> tried to roll back to a different day to restore to and it didn't take
> ...BTW
> whats with that the last 10 times i have tried to do a restore to prior
> day
> it has never workd even once and it used to all the time ...but i digree
> when
> i am in safe mode of course nothing works the opnly thing new or different
> is
> my new monitor and earlier when i first attached the new monitor it would
> go
> through the whole start up thing and then when the names appeared to log
> in
> thru it would go "click" and restart itself any help?? and when i
> tried
> to hook up a different harddrive as a slave I got these rainbows of bands
> scrolling veertically down my screen help i need more than safe mode !!
> thx!! jill
>
Was this post helpful to you?
- 8
- Windows XP >> Unsolicited E-Mail From MicrosoftHi-
In regards to one of my e-mail ISP accounts: How do I
remove unsolicited e-mail from Microsoft, such as, MS
Corportation Security, Net Message Service, Microsoft
Security, Critical Update, etc.? In some of these e-
mails I can't find the option to unsubscribe.
If anyone should know how I can eliminate this
problem/bug, please let me know as soon as possible.
Thanks, all, for your help and support.
-Russ
- 9
- 10
- 11
- Windows XP >> Vizact crashing with MSHTML.DLL error (IE6/XP)Hello,
Does Vizact have any known problems with either XP or IE6
because every time I try and save something in Vizact it crashes with
a MSHTML.DLL error. I have installed a full clean version of it having
bought a brand new copy cheaply yesterday and currently run FrontPage
2000 and the rest of Office 2000 Premium.
My computer has all the latest updates and patches, so I have no idea
how to get around this problem apart from downgrade my PC to Windows
98SE and IE5.5 because that's what I read somewhere as an ideal
environment for Vizact 2000. Thanks for any suggestions or advice.
Best,
Bill
- 12
- Windows XP Security >> Limit log on session timeIs there a way to limit log on session time in a domain that uses roaming
profiles. Not talking about limiting access hours or computers, just log on
session time, much like what can be done on a single computer at home to
limit child access time.
- 13
- 14
- Windows XP Setup >> HELLLLLLLLPPPPPPPPPPPPEvery time that i start up my windows xp laptop, i go to
the novell log on screen, because i have novell installed
on my pc. And the user name always says Administrator. My
first question is how to change this so it always
says "Danny" my username in the workstation. And when i
log in, i get a message that says that a controller for
the specific domain can not be found, so i always also
have to go to advanced and click domain and change it to
zeledann, the name of my computer. My second question is
how to change the default domain or delete the one that
doesn't work.
- 15
- Windows XP Support >> internet explorer is too slow, system slows down.hi,
my prob is regarding system speed.
when i open internet explorer it takes long to open, looks like someone
stoping him from opening, lol...other progs are not opening as fast as they
were before....
is it some kinda virus or anything like tht, i guess the inetinfo.exe is
responcible for it...is it really? there is no other process running in
task manager except ntvdm.exe which are like unknown . the maximum memory
and cpu usasge is used by the ieplorer.exe... no other program is installed
which can reduce the speed..
Im using, p3, 700, with 128 mb ram....its slow config own, but i
guess the system wasnt' these slow before...
okay, i guess thats enough info..
thanking u...
- Anjul.
|
| Author |
Message |
davidgallucci
|
 Posted: Fri Aug 29 18:47:48 CDT 2003 |
Top |
Windows XP >> how to get mpeg thumbnails back
Just recently I installed quicktime, and it took over
windows media player 8's mpeg file association. When I
restored mpegs to play in wmp, I was no longer able to
see thumbnails of the mpegs using the thumbnail view in
windows explorer. Can anyone help me?
Windows XP538
|
| |
|
| |
|
Tim
|
| Posted: Fri Aug 29 18:47:48 CDT 2003 |
Top |
Windows XP >> how to get mpeg thumbnails back
Click inside the folder the movies are in and select Properties>Customize.
Select "Videos" in the available folder options. In the folder, rightclick
and select "thumbnails".
They should appear as thumbnail images. If not, try the other options, like
"Photos".
Sometimes though, a video may not appear as a thumbnail.
Hope that helps
Tim
"kyle c" <EMail@HideDomain.com> wrote in message
news:00e801c36e5a$d54fbab0$EMail@HideDomain.com...
> Just recently I installed quicktime, and it took over
> windows media player 8's mpeg file association. When I
> restored mpegs to play in wmp, I was no longer able to
> see thumbnails of the mpegs using the thumbnail view in
> windows explorer. Can anyone help me?
|
| |
|
| |
|
Kelly
|
| Posted: Sat Aug 30 02:51:42 CDT 2003 |
Top |
|
| |
|
| |
|
Index ‹ Windows XP ‹ Windows XP |
- Next
- 1
- Windows XP Support >> outlookI have recently lost everything out of outlook i.e. inbox e-mails, deleted
e-mails and sent e-mails. Can anyone tell me how to find them again sorry I'm
a bit of a novice
- 2
- Windows XP Perform Maintain >> desk top propertiesNormally when you go, right click on desktop>properties,
you get the tabs (display properties, settings,
backgruond,screensaver etc) but now i do the same thing
and all i get is display properties window, what happened
to the other tabs.
- 3
- customize >> Error loading my user profile (desktop setting)I just noticed that each time I try to log on to my ,the
system throws up an error message saying that my
personalised settings (user profile) is either corrupt or
bad and can not be loaded. it then boots up with a fresh
temporary profile as if am a new user.
When I logged in as an administrator and went to control
panel-system-advanced-user porfiles. I noticed that the
profiles attached to my sign on was having status as
backup while all other had local status. what can I do to
restore my desktop setting as I cherish it so much and
have personalised software running with it.
I run a window xp professional in a domian environment.
Please your help is needed urgently
thanks in anticipation.
- 4
- 5
- Windows XP Perform Maintain >> RPC service hung on startingWhenever I reboot my computer I get and Event ID 7022 "The
RPC service hung on starting". It starts eventually, but
I continue to have trouble with things like installing a
new printer.
This error is preceeded in Event Viewer by a error with
the acpi:
AMLI: ACPI BIOS is attempting to write to an illegal IO
port address 0xcf8), which lies in the 0xcf8 - 0xcff
protected address range. This could lead to system
instability. Please contact your system vendor for
technical assistance
Microsoft suggested updating my BIOS, but I'm not ready to
do that yet. Remember all this started when I tried to
install a firewire card.
Any suggestions would be appriciated.
Thanks,
Mike
- 6
- Windows XP Support >> Boots up in safe mode-graphics card message.I had to do a system restore because when I boot up it stays in safe
mode. I have access to e mail and the net but I have the teal green
background and cannot get out of safe mode.
I have found a Unichrome graphics device that has an exclamation mark
on it. The error indicates that the device" cannot find enough free
resources that it can use. (Code 12). If you want to use the device you
will have to disable one of the other devices on this system."
Hmm. Why can't it find enough resources and exactly which other devices
do I have to disable?
Any suggestions would be appreciated.
--
martinc
- 7
- Windows XP Network >> tcp/ip driver is invalidipconfig /all gives message: internal error . The request is not supported.
The request is not supported.
^^^^^^ Additional error message & history.
ipconfig /all "internal error"
The request is not supported.
Windows XP Pro SP 1
Ethernet connection. Netgear Wireless card also installed. Neither can
connect.
No firewall.
"DNS Client", IPSEC,"DHCP Client", will not start.
Error 1068 "dependency service or group failed to start"
There are many other services which are stopped, but I don't know if they
are important to this issue.
The problem began after attempting to upgrade to XP SP2. I wasn't present
when the upgrade to SP2 was attempted. I don't know if any error messages
occurred during the upgrade attempt.
Event Viewer:
Service Control Manager. Event ID 7000
tcp/ip service protocol driver failed to start. "specified driver is invalid".
Computer had moderate amount of spyware, & infected files, which I have
removed.
^^^^^^^^
Windows XP Pro SP 1
Ethernet connection. Netgear Wireless card also installed. Neither can
connect.
No firewall.
"DNS Client", IPSEC,"DHCP Client", will not start.
Error 1068 "dependency service or group failed to start"
There are many other services which are stopped, but I don't know if they
are important to this issue.
The problem began after attempting to upgrade to XP SP2. I wasn't present
when the upgrade to SP2 was attempted. I don't know if any error messages
occurred during the upgrade attempt.
Event Viewer:
Service Control Manager. Event ID 7000
tcp/ip service protocol driver failed to start. "specified driver is invalid".
Computer had moderate amount of spyware, & infected files, which I have
removed.
***********
things I have tried in the past 3 hours:
1. I uninstalled the wi-fi nic, turned off PC, removed wi-fi nic.
2. I uninstalled the ethernet nic, turned off PC, removed ethernet nic [
real tek chip ].
3. I turned off the PC, installed a 3 com nic & driver.
4. ran WinSockFix
5. ran LspFIX
6. Tried to repair connection, > "failed to query tcp/ip"
7. from command prompt: netsh int ip reset resetlog.txt
Here's the log, but the problem persists.
reset SYSTEM\CurrentControlSet\Services\Dhcp\Parameters\Options\15\RegLocation
old REG_MULTI_SZ =
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\?\DhcpDomain
SYSTEM\CurrentControlSet\Services\TcpIp\Parameters\DhcpDomain
added
SYSTEM\CurrentControlSet\Services\Netbt\Parameters\Interfaces\Tcpip_{355165
82-1A8C-4D62-ADB6-AC46DEF84F22}\NetbiosOptions
added
SYSTEM\CurrentControlSet\Services\Netbt\Parameters\Interfaces\Tcpip_{54AA88
38-72FC-4DEB-80D5-8C161864F171}\NetbiosOptions
deleted SYSTEM\CurrentControlSet\Services\Netbt\Parameters\EnableLmhosts
added
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{44E91C79-5C7B-45DE-BBE0-B1798AB0655D}\DisableDynamicUpdate
deleted
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{44E91C79-5C7B-45DE-BBE0-B1798AB0655D}\IpAutoconfigurationAddress
deleted
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{44E91C79-5C7B-45DE-BBE0-B1798AB0655D}\IpAutoconfigurationMask
deleted
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{44E91C79-5C7B-45DE-BBE0-B1798AB0655D}\IpAutoconfigurationSeed
reset
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{44E91C79-5C7B-45DE-BBE0-B1798AB0655D}\RawIpAllowedProtocols
old REG_MULTI_SZ =
0
reset
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{44E91C79-5C7B-45DE-BBE0-B1798AB0655D}\TcpAllowedPorts
old REG_MULTI_SZ =
0
reset
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{44E91C79-5C7B-45DE-BBE0-B1798AB0655D}\UdpAllowedPorts
old REG_MULTI_SZ =
0
added
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{8B45FF83-13BB-47E8-8BEE-E46879BF9F72}\DisableDynamicUpdate
deleted
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{8B45FF83-13BB-47E8-8BEE-E46879BF9F72}\IpAutoconfigurationAddress
deleted
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{8B45FF83-13BB-47E8-8BEE-E46879BF9F72}\IpAutoconfigurationMask
deleted
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{8B45FF83-13BB-47E8-8BEE-E46879BF9F72}\IpAutoconfigurationSeed
reset
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{8B45FF83-13BB-47E8-8BEE-E46879BF9F72}\RawIpAllowedProtocols
old REG_MULTI_SZ =
0
reset
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{8B45FF83-13BB-47E8-8BEE-E46879BF9F72}\TcpAllowedPorts
old REG_MULTI_SZ =
0
reset
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{8B45FF83-13BB-47E8-8BEE-E46879BF9F72}\UdpAllowedPorts
old REG_MULTI_SZ =
0
deleted
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\DontAddDefaultGatewayDef
ault
deleted SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\EnableIcmpRedirect
deleted
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\EnableSecurityFilters
deleted SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\SearchList
deleted SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\TcpWindowSize
deleted
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\UseDomainNameDevolution
reset Linkage\UpperBind for
PCI\VEN_104C&DEV_9066&SUBSYS_4C001385&REV_00\3&61AAA01&0&48. bad value was:
REG_MULTI_SZ =
PSched
reset Linkage\UpperBind for ROOT\MS_NDISWANIP\0000. bad value was:
REG_MULTI_SZ =
PSched
reset Linkage\UpperBind for
PCI\VEN_10EC&DEV_8139&SUBSYS_813910EC&REV_10\3&61AAA01&0&58. bad value was:
REG_MULTI_SZ =
PSched
<completed>
reset SYSTEM\CurrentControlSet\Services\Dhcp\Parameters\Options\15\RegLocation
old REG_MULTI_SZ =
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\?\DhcpDomain
SYSTEM\CurrentControlSet\Services\TcpIp\Parameters\DhcpDomain
deleted SYSTEM\CurrentControlSet\Services\Netbt\Parameters\EnableLmhosts
added
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{0BB46FB0-30DE-46B0-9FE1-8BA039766F89}\AddressType
added
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{0BB46FB0-30DE-46B0-9FE1-8BA039766F89}\DisableDynamicUpdate
reset
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{0BB46FB0-30DE-46B0-9FE1-8BA039766F89}\RawIpAllowedProtocols
old REG_MULTI_SZ =
0
reset
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{0BB46FB0-30DE-46B0-9FE1-8BA039766F89}\TcpAllowedPorts
old REG_MULTI_SZ =
0
reset
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{0BB46FB0-30DE-46B0-9FE1-8BA039766F89}\UdpAllowedPorts
old REG_MULTI_SZ =
0
deleted
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\DontAddDefaultGatewayDef
ault
deleted SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\EnableIcmpRedirect
deleted
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\EnableSecurityFilters
deleted SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\SearchList
deleted
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\UseDomainNameDevolution
reset Linkage\UpperBind for
PCI\VEN_10B7&DEV_9200&SUBSYS_100010B7&REV_78\3&61AAA01&0&58. bad value was:
REG_MULTI_SZ =
PSched
reset Linkage\UpperBind for
PCI\VEN_104C&DEV_9066&SUBSYS_4C001385&REV_00\3&61AAA01&0&48. bad value was:
REG_MULTI_SZ =
PSched
reset Linkage\UpperBind for ROOT\MS_NDISWANIP\0000. bad value was:
REG_MULTI_SZ =
PSched
<completed>
8. Searched registry for SymTDI. Not found.
9. re-installed tcp/ip on top of itself
Thanks for your help.
WC
- 8
- Windows XP >> Control Panel display changes.I've setup my XP Pro SP1 PC to show all folders in Details view, thru
Windows Explorer. But I don't want Control Panel to show in this format, so
i changed it to icon view.
It keeps reverting back to detailed view!? Why?
The setting "Remember each folder's view settings" is set with a tick.
--
Julian Milano
- 9
- Windows XP Network >> svchost error at logon and no network connections availableHi,
My laptop (Tosh Sat Pro 6100 1.8GHz/1Gb) has been running
perfectly until this morning. The machine has both a
firewall (Kerio) and is running up-to-date anti-virus
software (Norton 2002).
Prior to the "Welcome to Windows" display, a "svchost.exe
Application Error (instruction 0x57d43c16 referenced
memory at 0x00000001. The memory could not be written"
message is displayed.
I am unable to see any Network Connection icons anwhere.
The devices appear in the Device Manager and can be
configured but are unable to connect to a network.
I've checked that all services are configured properly
and have tried loading the latest drivers available
(which are the ones being used previously anyway ...)
I've also followed all relevant threads in the Microsoft
KB
I can't access any of my System Restore either ...
It seems weird to be accesing an address of 0x00000001.
Any advice would be GREATLY apppreciated.
Kind regards,
Cam
- 10
- Windows XP >> windowsupdate.com - Internet Connection Loss After UpdateDear Group
Has anyone experienced a loss of internet connection (Verizon Broadband)
after updating Windows XP with the latest recommended Security Packs from
http://www.windowsupdate.com? E.g. When browser is opened after update,
'Page Not Found Message' is displayed but immediately before the update it
worked perfectly fine.
If yes, what's the problem and how can it best be fixed?
Microsoft Windows XP Home Edition 5.1 Build 2600.xpsp1.020828-1920: Service
Pack 1.
Thanks for your time & efforts!
Martin
- 11
- Windows XP Update >> 80248011 errorI get the 80248011 error when trying to run wiiindows update from teh
windows update website. I've followed their suggestions but it still comes
back with the same error. Cleared cache etc. renamed software distribution
directory. I'm using Windows XP.
- 12
- Windows XP Network >> media disconnectedhave connected 2 pc's via rj45 crossover cable, icons in
notification area say network is 100mbps and 10mbps.
Master pc is 10.10.30.1, second pc is 10.10.30.2. both on
same workgroup.
When using ipconfig, the second pc says media
disconnected, this implies a cable is unplugged, but icons
and network place icons say everything is connected and ok.
please, pleas help
- 13
- Windows XP >> Windows Desktop Search - no PDF indexing?I use and love the Windows Desktop Search. I was concerned that the
indexing would interfere or slow down my runnign applications but this has
not happened.
However on failing to find a PDF I have noticed in Indexing options/advanced
options/file types that thhe files extensions only go as far as "mda" which
obviously leaves out the prospect of indexing pdf files.
Can anyone advise me on this anomaly?
regards,
Beemer
- 14
- Windows XP >> Wireless Zero ConfigurationHave set up a Netgear Wireless BB connection in an office and during an
attempt to log back into the router for wep enabling purposes my own linksys
wifi card ceases to function. I cannot see any available wifi nets as windows
cannot configure my wifi card. I have been prompted to check the " Use
Windows to configure my wireless network settings " check box. I do not have
one. I am using XP home with SP2. and have tried to uninstall the wireless
card and reinstalled. No good. The check box for the " Use Windows to
configure my wireless network settings " just does not exist...? can anyone
help please?..
Any help is appreciated well in advance!!
Thanks
Jaf
P.S. Got help from Brian, (Thanks B), and queried through the cmd prompt
whether WZC was active. I was returned the error 1060 and the message that
the specified service was not installed. Since I have re-installed the device
already and that has not solved the problem I am wondering where I might get
the softare to perform this function.
I have been on to Microsoft through their product support line and they are
willing to throw their opinion in at a cost of â?¬75 + VAT.
Is this the wall? or can I get over, under or around it?
J
- 15
- Windows XP Support >> Scheduled tasks and SysprepThere is the well documented problem of Scheduled Tasks that use a system
account not running on a PC that uses a Syspreped image but I have a
situation where neither Scheduled Tasks running under a system account OR a
user account will run. Also, the "Run As" box is greyed out so I don't have
the option to run as a different user. Any ideas as to sort this would be
much appreciated. My Sysprep reference machine runs XP PRO SP2 and I have
"Ghosted" it to eight machine which all have the same problem.
Thanks,
Steve.
|
|
|