| Print Spooler unable to Start |
|
 |
Index ‹ Windows XP ‹ Windows XP Support
|
- Previous
- 1
- Windows XP Hardware >> HelpPlease Please can you help me, I am on winxp & I cannot
get any sound, only sictem sounds,I keep on trying to put
the drivers on but no luck,I keep getting this
application fas failed to start because gustrilib.dd was
not found.
I have tryed on the intrnet to find this with-out any
luck.
Please help as I dont know what else to do.
Thank You
WROBY1@AOL.COM
- 2
- Windows XP Update >> Windows XP Won't Update!!Hi,
I have a Windows XP machine which is attempting to get updates from a SUS
server. (Oh dear I hear you say.) I get the updates downloaded successfully
and they then begin to install. However, upon completion, I check the event
log only to find that the update in fact has not installed at all. I'm logged
in as Local Administrator so I should have full access.
However, if I then check the installation log of the updates which had
problems, it says: Failed To Enable SE_SECURITY_PRIVILEGE
Setup encountered an error: You do not have permission to update Windows XP.
?? Why don't I?? I am an administrator. I'm a bit lost on this one. I'm not
a huge fan of SUS but this is a bit daft!
Any idea's?
Your help would be gratefully appreciated.
- 3
- 4
- Windows XP Setup >> sp-1I had to reinstall XP again. Ithe last time i did this i
had to go into the rededit feature and delete the SP-1. i
lost my noted and forgot the path in the reg. With out
this I have no network access. Please send an E-Mail if
you can help. Bill
- 5
- Windows XP Security >> email attachments and xp sp2i installed sp2 and ever since then when i send windows
media audio/video files using out look express i've had
problems. it appears to send ok but the person im sending
to never recieves them (they have windows 98se). i never
had any problems before and im wondeing if i need to
change settings in security settings. any help would be
appreciated. Thanks
- 6
- Windows XP Perform Maintain >> How to make XP CD Format when Clean Installing??Help! My friend has a new computer, and he already kind of goofed up the
registry (after just three days, ai-curumba). So he wants to do a clean
install. He does have the XP full install disk. However, we ran into a
problem.
When we did what we thought was a clean install, it seems that the hard
drive was not formatted, so that the pre-existing mess of program folders
created by my friend still resided on the drive, and it almost seems like
the registry had the same program entries as before. So, what the heck, we
wanted to just reformat the hard drive to wipe everything clean, and then
install everything from the very beginning.
But, how do you make the XP CD forma the hard drive when doing a clean
install? (When we did the install we chose to keep the previous disk
partitions the same, and installed XP to its previous location. I'm
guessing this is the reason the XP CD didn't reformat the hard drive?? If
so, how much space should we leave for the OS partition? Total drive space
is 60Gigs.)
Thanks for the help!
--
ICQ#
- 7
- Windows XP >> File orderIt seems that when I browsed files the folder would have them in
alphabetical order. Now they are to jumbled and I have to specify I want to
see them in alphabetical order. and if I'm selecting several files I have to
keep specifying. Is there a way to set this so that the files are always in
alphabetical order in the folder?
Thanks
John
- 8
- Windows XP >> gttask no diusk in driveWhen I start windows or try to load a video file uysing
Quicktime I get a message there is no disk in drvie and
that it is related with something called gttask.exe. I
searched for this program I found two resuls Quicktime
and some part of Windows know as qttask.exe can i delete
these files safly or do I need to reinstalle them.
P.S already tryed uninstalling Quicktime and reinstalling
it and that did not work.
- 9
- Windows XP MovieMaker >> Cannot capture video from computer back to Sony camcorderEvery time I begin the process to put the movie back on the camcorder, I
follow the save movie wizard procedure. I am told that it is creating the
movie but each time I get a message that the process was unsucessful. What
am I doing wrong. Is there something I have to set either the computer or
video camera up so that this can take place. Someone please help.
- 10
- 11
- Windows XP Perform Maintain >> Mouse dragging problemMy mouse works fine except for one thing. I tried several
mice so my mouse cannot be the problem. I try to drag a
box or window by holding and pressing the left button and
then draggin it however it requires me to press and hold
for longer than 3 seconds. It should drag right away. How
can i fix this problem?
- 12
- Windows XP Perform Maintain >> need help extracting file sndvol32.exe!!!i've been doing what the windows help article says: put=20
in windows xp disc, type cmd...etc. but i keep getting a=20
message saying that there is no destination file=20
specified. can someone help me out w/ the commands i=20
should be using?? i'm trying to restore my sound/volume=20
control and icon to the tray. thank you!!!
ren=E9e
- 13
- 14
- Windows XP Setup >> Help.I need some help. I just bought a wireless G router. I
have a desktop and laptop. My desktop is wired and I have
a wireless PCIA card in my laptop. So far I can get it so
both computers can access the internet, but aren't I
supposed to be able to share files? How do I do that?
- 15
- Windows XP Security >> Access denied on WorkstationThis is a long question. I hope you will take the time to read and help
In my simple 2 workstation, Windows XP HOME network, I am logged into BOTH machines with administrator priviledges, no passwords-no restrictions.
If I create a folder on workstation 1 over the network from workstation 2, then I cannot access that folder from workstation 1. My access is denied
I can access the folder only from the workstation from which I created the folder
Is there any way to overcome this
This is a problem because I have reinstalled "workstation 2" and now cannot access these folders at all. I really don't want to reformat the disk, but I need to access and then delete these folders in question
Booting into safe mode is no help.
|
| Author |
Message |
Doug
|
 Posted: Tue Jul 10 18:15:31 CDT 2007 |
Top |
Windows XP Support >> Print Spooler unable to Start
Hello,
My "Print Spooler Service" will not start.
It does not start with windows while booting, but I do not receive an error
message.
I have tried to start it manually, (Control Panel/Administrative
Tools/Component Services/ right click Print Spooler and click start), however
I get the following error message:
"Could not start the Print Spooler service on Local Computer.
Error 1068: The dependency service or group failed to start"
Any help would be greatly appreciated.
Memorex.
Windows XP1234
|
| |
|
| |
|
John
|
| Posted: Tue Jul 10 18:15:31 CDT 2007 |
Top |
Windows XP Support >> Print Spooler unable to Start
The print spooler depends on the Remote Procedure Call (RPC). Make sure
that both of those are set to Automatic Start. Do you now or did you
ever have a Lexmark or Dell printer installed on the computer? Lexmark
printers change the spooler dependencies.
John
memorex wrote:
> Hello,
>
> My "Print Spooler Service" will not start.
>
> It does not start with windows while booting, but I do not receive an error
> message.
>
> I have tried to start it manually, (Control Panel/Administrative
> Tools/Component Services/ right click Print Spooler and click start), however
> I get the following error message:
>
> "Could not start the Print Spooler service on Local Computer.
> Error 1068: The dependency service or group failed to start"
>
>
> Any help would be greatly appreciated.
> Memorex.
|
| |
|
| |
|
memorex
|
| Posted: Wed Jul 11 08:12:01 CDT 2007 |
Top |
Windows XP Support >> Print Spooler unable to Start
RPC is set to start automatically, and is on.
I had previously installed the Lexmark X1180. It worked fine, but then I
un-installed the drivers and removed the printer. Everything still worked
fine, and I was able to use another printer, (HP Deskjet 720c) over a LAN
connection, but then the print spooler error started. I can't install the
Lexmark drivers again as it says it requires the Print Spooler to be running.
"John John" wrote:
> The print spooler depends on the Remote Procedure Call (RPC). Make sure
> that both of those are set to Automatic Start. Do you now or did you
> ever have a Lexmark or Dell printer installed on the computer? Lexmark
> printers change the spooler dependencies.
>
> John
>
> memorex wrote:
> > Hello,
> >
> > My "Print Spooler Service" will not start.
> >
> > It does not start with windows while booting, but I do not receive an error
> > message.
> >
> > I have tried to start it manually, (Control Panel/Administrative
> > Tools/Component Services/ right click Print Spooler and click start), however
> > I get the following error message:
> >
> > "Could not start the Print Spooler service on Local Computer.
> > Error 1068: The dependency service or group failed to start"
> >
> >
> > Any help would be greatly appreciated.
> > Memorex.
>
|
| |
|
| |
|
John
|
| Posted: Wed Jul 11 10:54:24 CDT 2007 |
Top |
Windows XP Support >> Print Spooler unable to Start
Open a Command Prompt and issue the following command:
sc config spooler depend= RPCSS
Note that there is a space after the = but none before. After you run
the command try restarting the spooler with this command:
net start spooler
If that doesn't fix things you may need to thoroughly clean the print
spooler. You can use the Resource Kit's Cleanspl.exe to do this:
Windows Server 2003 Resource Kit Tools
http://www.microsoft.com/downloads/details.aspx?FamilyID=9d467a69-57ff-4ae7-96ee-b18c4790cffd&DisplayLang=en
or do it manually:
"Spooler subsystem app has encountered a problem and needs to close" and
"Operation could not be completed" error messages
http://support.microsoft.com/default.aspx?scid=kb;en-us;324757
Bruce Sanderson has a very good help page for these kinds of problems:
http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm#LexmarkDriver
John
memorex wrote:
> RPC is set to start automatically, and is on.
>
> I had previously installed the Lexmark X1180. It worked fine, but then I
> un-installed the drivers and removed the printer. Everything still worked
> fine, and I was able to use another printer, (HP Deskjet 720c) over a LAN
> connection, but then the print spooler error started. I can't install the
> Lexmark drivers again as it says it requires the Print Spooler to be running.
>
> "John John" wrote:
>
>
>>The print spooler depends on the Remote Procedure Call (RPC). Make sure
>>that both of those are set to Automatic Start. Do you now or did you
>>ever have a Lexmark or Dell printer installed on the computer? Lexmark
>>printers change the spooler dependencies.
>>
>>John
>>
>>memorex wrote:
>>
>>>Hello,
>>>
>>>My "Print Spooler Service" will not start.
>>>
>>>It does not start with windows while booting, but I do not receive an error
>>>message.
>>>
>>>I have tried to start it manually, (Control Panel/Administrative
>>>Tools/Component Services/ right click Print Spooler and click start), however
>>>I get the following error message:
>>>
>>>"Could not start the Print Spooler service on Local Computer.
>>>Error 1068: The dependency service or group failed to start"
>>>
>>>
>>>Any help would be greatly appreciated.
>>>Memorex.
>>
|
| |
|
| |
|
memorex
|
| Posted: Wed Jul 11 11:40:03 CDT 2007 |
Top |
Windows XP Support >> Print Spooler unable to Start
The Print Spooler service started successfully after running the command to
modify the dependency.
Thanks for your help.
Daniel.
"John John" wrote:
> Open a Command Prompt and issue the following command:
>
> sc config spooler depend= RPCSS
>
> Note that there is a space after the = but none before. After you run
> the command try restarting the spooler with this command:
>
> net start spooler
>
> If that doesn't fix things you may need to thoroughly clean the print
> spooler. You can use the Resource Kit's Cleanspl.exe to do this:
>
> Windows Server 2003 Resource Kit Tools
> http://www.microsoft.com/downloads/details.aspx?FamilyID=9d467a69-57ff-4ae7-96ee-b18c4790cffd&DisplayLang=en
>
> or do it manually:
>
> "Spooler subsystem app has encountered a problem and needs to close" and
> "Operation could not be completed" error messages
> http://support.microsoft.com/default.aspx?scid=kb;en-us;324757
>
> Bruce Sanderson has a very good help page for these kinds of problems:
> http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm#LexmarkDriver
>
> John
>
>
> memorex wrote:
>
> > RPC is set to start automatically, and is on.
> >
> > I had previously installed the Lexmark X1180. It worked fine, but then I
> > un-installed the drivers and removed the printer. Everything still worked
> > fine, and I was able to use another printer, (HP Deskjet 720c) over a LAN
> > connection, but then the print spooler error started. I can't install the
> > Lexmark drivers again as it says it requires the Print Spooler to be running.
> >
> > "John John" wrote:
> >
> >
> >>The print spooler depends on the Remote Procedure Call (RPC). Make sure
> >>that both of those are set to Automatic Start. Do you now or did you
> >>ever have a Lexmark or Dell printer installed on the computer? Lexmark
> >>printers change the spooler dependencies.
> >>
> >>John
> >>
> >>memorex wrote:
> >>
> >>>Hello,
> >>>
> >>>My "Print Spooler Service" will not start.
> >>>
> >>>It does not start with windows while booting, but I do not receive an error
> >>>message.
> >>>
> >>>I have tried to start it manually, (Control Panel/Administrative
> >>>Tools/Component Services/ right click Print Spooler and click start), however
> >>>I get the following error message:
> >>>
> >>>"Could not start the Print Spooler service on Local Computer.
> >>>Error 1068: The dependency service or group failed to start"
> >>>
> >>>
> >>>Any help would be greatly appreciated.
> >>>Memorex.
> >>
>
|
| |
|
| |
|
John
|
| Posted: Wed Jul 11 12:03:10 CDT 2007 |
Top |
Windows XP Support >> Print Spooler unable to Start
You're welcome.
John
memorex wrote:
> The Print Spooler service started successfully after running the command to
> modify the dependency.
>
> Thanks for your help.
>
>
> Daniel.
>
>
>
>
> "John John" wrote:
>
>
>>Open a Command Prompt and issue the following command:
>>
>>sc config spooler depend= RPCSS
>>
>>Note that there is a space after the = but none before. After you run
>>the command try restarting the spooler with this command:
>>
>>net start spooler
>>
>>If that doesn't fix things you may need to thoroughly clean the print
>>spooler. You can use the Resource Kit's Cleanspl.exe to do this:
>>
>>Windows Server 2003 Resource Kit Tools
>>http://www.microsoft.com/downloads/details.aspx?FamilyID=9d467a69-57ff-4ae7-96ee-b18c4790cffd&DisplayLang=en
>>
>>or do it manually:
>>
>>"Spooler subsystem app has encountered a problem and needs to close" and
>>"Operation could not be completed" error messages
>>http://support.microsoft.com/default.aspx?scid=kb;en-us;324757
>>
>>Bruce Sanderson has a very good help page for these kinds of problems:
>>http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm#LexmarkDriver
>>
>>John
>>
>>
>>memorex wrote:
>>
>>
>>>RPC is set to start automatically, and is on.
>>>
>>>I had previously installed the Lexmark X1180. It worked fine, but then I
>>>un-installed the drivers and removed the printer. Everything still worked
>>>fine, and I was able to use another printer, (HP Deskjet 720c) over a LAN
>>>connection, but then the print spooler error started. I can't install the
>>>Lexmark drivers again as it says it requires the Print Spooler to be running.
>>>
>>>"John John" wrote:
>>>
>>>
>>>
>>>>The print spooler depends on the Remote Procedure Call (RPC). Make sure
>>>>that both of those are set to Automatic Start. Do you now or did you
>>>>ever have a Lexmark or Dell printer installed on the computer? Lexmark
>>>>printers change the spooler dependencies.
>>>>
>>>>John
>>>>
>>>>memorex wrote:
>>>>
>>>>
>>>>>Hello,
>>>>>
>>>>>My "Print Spooler Service" will not start.
>>>>>
>>>>>It does not start with windows while booting, but I do not receive an error
>>>>>message.
>>>>>
>>>>>I have tried to start it manually, (Control Panel/Administrative
>>>>>Tools/Component Services/ right click Print Spooler and click start), however
>>>>>I get the following error message:
>>>>>
>>>>>"Could not start the Print Spooler service on Local Computer.
>>>>>Error 1068: The dependency service or group failed to start"
>>>>>
>>>>>
>>>>>Any help would be greatly appreciated.
>>>>>Memorex.
>>>>
|
| |
|
| |
|
grayson782
|
| Posted: Wed Oct 03 07:40:00 CDT 2007 |
Top |
Windows XP Support >> Print Spooler unable to Start
"John John" wrote:
> Open a Command Prompt and issue the following command:
>
> sc config spooler depend= RPCSS
>
> Note that there is a space after the = but none before. After you run
> the command try restarting the spooler with this command:
>
> net start spooler
>
> If that doesn't fix things you may need to thoroughly clean the print
> spooler. You can use the Resource Kit's Cleanspl.exe to do this:
>
> Windows Server 2003 Resource Kit Tools
> http://www.microsoft.com/downloads/details.aspx?FamilyID=9d467a69-57ff-4ae7-96ee-b18c4790cffd&DisplayLang=en
>
> or do it manually:
>
> "Spooler subsystem app has encountered a problem and needs to close" and
> "Operation could not be completed" error messages
> http://support.microsoft.com/default.aspx?scid=kb;en-us;324757
>
> Bruce Sanderson has a very good help page for these kinds of problems:
> http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm#LexmarkDriver
>
> John
>
>
> memorex wrote:
>
> > RPC is set to start automatically, and is on.
> >
> > I had previously installed the Lexmark X1180. It worked fine, but then I
> > un-installed the drivers and removed the printer. Everything still worked
> > fine, and I was able to use another printer, (HP Deskjet 720c) over a LAN
> > connection, but then the print spooler error started. I can't install the
> > Lexmark drivers again as it says it requires the Print Spooler to be running.
> >
> > "John John" wrote:
> >
> >
> >>The print spooler depends on the Remote Procedure Call (RPC). Make sure
> >>that both of those are set to Automatic Start. Do you now or did you
> >>ever have a Lexmark or Dell printer installed on the computer? Lexmark
> >>printers change the spooler dependencies.
> >>
> >>John
> >>
> >>memorex wrote:
> >>
> >>>Hello,
> >>>
> >>>My "Print Spooler Service" will not start.
> >>>
> >>>It does not start with windows while booting, but I do not receive an error
> >>>message.
> >>>
> >>>I have tried to start it manually, (Control Panel/Administrative
> >>>Tools/Component Services/ right click Print Spooler and click start), however
> >>>I get the following error message:
> >>>
> >>>"Could not start the Print Spooler service on Local Computer.
> >>>Error 1068: The dependency service or group failed to start"
> >>>
> >>>
> >>>Any help would be greatly appreciated.
> >>>Memorex.
> >>
>
|
| |
|
| |
|
grayson782
|
| Posted: Wed Oct 03 07:45:00 CDT 2007 |
Top |
Windows XP Support >> Print Spooler unable to Start
This procedure restored all of my machine's network printing features.
Only prompt was "enable bi-directional support," which is dimmed in my
printer's property box.
"John John" wrote:
> Open a Command Prompt and issue the following command:
>
> sc config spooler depend= RPCSS
>
> Note that there is a space after the = but none before. After you run
> the command try restarting the spooler with this command:
>
> net start spooler
>
> If that doesn't fix things you may need to thoroughly clean the print
> spooler. You can use the Resource Kit's Cleanspl.exe to do this:
>
> Windows Server 2003 Resource Kit Tools
> http://www.microsoft.com/downloads/details.aspx?FamilyID=9d467a69-57ff-4ae7-96ee-b18c4790cffd&DisplayLang=en
>
> or do it manually:
>
> "Spooler subsystem app has encountered a problem and needs to close" and
> "Operation could not be completed" error messages
> http://support.microsoft.com/default.aspx?scid=kb;en-us;324757
>
> Bruce Sanderson has a very good help page for these kinds of problems:
> http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm#LexmarkDriver
>
> John
>
>
> memorex wrote:
>
> > RPC is set to start automatically, and is on.
> >
> > I had previously installed the Lexmark X1180. It worked fine, but then I
> > un-installed the drivers and removed the printer. Everything still worked
> > fine, and I was able to use another printer, (HP Deskjet 720c) over a LAN
> > connection, but then the print spooler error started. I can't install the
> > Lexmark drivers again as it says it requires the Print Spooler to be running.
> >
> > "John John" wrote:
> >
> >
> >>The print spooler depends on the Remote Procedure Call (RPC). Make sure
> >>that both of those are set to Automatic Start. Do you now or did you
> >>ever have a Lexmark or Dell printer installed on the computer? Lexmark
> >>printers change the spooler dependencies.
> >>
> >>John
> >>
> >>memorex wrote:
> >>
> >>>Hello,
> >>>
> >>>My "Print Spooler Service" will not start.
> >>>
> >>>It does not start with windows while booting, but I do not receive an error
> >>>message.
> >>>
> >>>I have tried to start it manually, (Control Panel/Administrative
> >>>Tools/Component Services/ right click Print Spooler and click start), however
> >>>I get the following error message:
> >>>
> >>>"Could not start the Print Spooler service on Local Computer.
> >>>Error 1068: The dependency service or group failed to start"
> >>>
> >>>
> >>>Any help would be greatly appreciated.
> >>>Memorex.
> >>
>
|
| |
|
| |
|
| |
|
Index ‹ Windows XP ‹ Windows XP Support |
- Next
- 1
- Windows XP >> Un-installing a Program ProblemsWhen I upgraded my computer from ME to XP I had a program
that XP never mentioned was incompatible but when I
started it on xp it did not work so I went to un-install
it but it said it could not un-install because it could
not reach a network but I don't have a network. Can
anyone help?
Thanks!!
- 2
- 3
- Windows XP Network >> Mapped network driveGood afternoon
i have a question;
when i map a network drive with windows XP and leave it
for a long time without accessing it, it adds a red X on
the drive. what does this X mean, does it have any
effect on the drive? does it prevent access to the drive
from a DOS batch file which i launch during the night?
thanks
- 4
- 5
- Windows XP Setup >> Invalid CD Key message...The computer I have is a custom built PC, and I ordered a
copy of Windows XP Pro for it. Just recently I decided
to reformat, but when I go to enter my CD Key it says
invalid CD Key??? What is wrong?? Ive checked to make
sure im entering it correctly, but it continues to
say "Invalid CD Key".
Daniel
- 6
- 7
- customize >> Calendar RemindersHow do I get Calendar reminders to always pop-up over
Word, Excel or Project?
The pop-up shows on top if I am in Outlook, however, in
other programs it shows up on the task bar and
is "underneath" the other Office applications, so I don't
notice it.
I have XP 2002.
Thanks a lot !
- 8
- Windows XP Support >> Error Message - Instruction at 0x022c367e referenced memory could not be "read"I am receiving messages that my firefox, explorer, google updater, and
others are saying "Instruction at 0x022c367e referenced memory 0x000000
could not be "Read" Hit OK to cancel (or stop) the program."
I got a Norton message saying: Server execution failed (0x80080005)
10,5
Altogether, the system is running very slowly - openning program like
Word, Google esktop Searches, etc.
I have made no recent downloads or updates - to my knowledge. I did
instal a "Contentwatch" program in the past month, but the system was
working well even after the installation.
I have tried restarting the machine to no avail.
Any leads?
Thanks.
Uri
- 9
- Windows XP Support >> message at start upevery time I start up computer I get this 2
messages:C:\Windows\SYSTEM32\AUTOEXEC.NT.This file is not suitable for
running MS-DOS and Microsoft Windows Applications, and the another one
say:Monitor:can't find agent "bitwareNT.Agent"class "WCNt agent", my computer
still run ok but this worries me, any idea how to fix this, please help
- 10
- Windows XP >> copy questionWhen I buy a new hard drive, is there anyway to copy the
hotfixes and updates to the new drive without having to
download them all again?
- 11
- customize >> power options problemsHi,
I have a IBM PC with Windows XP Professional.It is
connected in a network.
When I log in as administrator, I can change the power
options, scheme, turn off monitor, harddisk etc..
But when I log in as a user again, the power options
didn't seem to change to what I have assigned. Please
help,anyone. Thanks.
- 12
- Windows XP Support >> Missing icons and menus ... ANNOYING. Help!!I normally don't post binaries or links to them as images but I have to show
pictures or else I might be misunderstood. This is a very strange and
annoying problem I hope I can fix SOON! But I need your help.
http://weasel.faricy.net/prob1.JPG
http://weasel.faricy.net/prob2.JPG
http://weasel.faricy.net/prob3.JPG
http://weasel.faricy.net/prob4.JPG
I have absolutely no idea how this happened, but my start menu no longer
displays icons next to any shortcuts or folder items. Then, my Quick Launch
toolbar has all the items there, but no icons and each item appears as a
very tiny button when moving the mouse over them. I also notice I cannot
switch my Folder Views to anything but Large Icons. If I select "List" from
the View menu, I simply still get Large Icons displayed. The menu bars in
Internet Explorer and Windows Explorer are there, but are blank. I can click
in certain places and bring the menus up but I can't see "File" "Edit"
"View" etc ... as if the fonts were "clear".
I have double-checked all settings as far as themes/appearance font size,
colors, etc. I've tried reverting to classic mode. I am not new to computers
whatsoever but this problem has me stumped and it's really annoying. No
viruses, no ad-ware either. This all happened at once. Only thing I've done
today is installed the Microsoft .NET 2.0 SDK and Visual Studio 8. Removing
those didn't help either. I have rebuilt icons in TweakUI. Doesn't help.
Reinstalled vid drivers, rebooted. Nothing.
Help!!
- 13
- Windows XP Update >> XP SP2 Updates SaveHow can I save the windows updates in a different folder and install them
anytime i want.Because of my slow internet connection, anytime I format my
hard
drive i have to to wait for a very long time until windows finish download
the updates.
Thank you!
- 14
- Windows XP >> ID:7 IO_ERR_BAD_BLOCKmessage: device 1%, has a bad block
What does this mean exactly and what can i do?
Can disk be saved?
OS now hangs and windows takes forever to come up.
XP Pro
thanks pamela
- 15
- Windows XP Network >> 2 computer LANI'm to connect 2 XP pro computers without a hub using a
cat 5 crossover cable, but get a network cable unplugged
message on both ends. I've checked the cable. What do I
need to do?
|
|
|