| Amd processor and Windows XP |
|
 |
Index ‹ Windows XP ‹ Windows XP Hardware
|
- Previous
- 1
- Windows XP >> windows updateIf I go into IE6 and click on the windows update in the Tools tab
I get this information on the web page:
Thank you for your interest in Windows Update
Windows Update is the online extension of Windows that helps you get the
most out of your computer.
You must be running a Microsoft Windows operating system in order to use
Windows Update.
The system is xp pro sp1
Does anyone have a way of rectifying this problem?
Thanks for your time
- 2
- Windows XP Hardware >> "Cannot Install This Hardware" "Access is Denied"Hi,
I am unable to enable or update drivers for my display adapter (ATI
Radeon X300).
I have tried several alternatives that were posted on the Internet and
have found the problem (I hope so). However I am unable to overcome
this.
I have enabled logging whenever the operations (enabling of the
display adapter OR updating its driver) into a file C:\WINDOWS
\setupapi.log.
I further tried to set a registry value that would enable registry
updates to be logged too. (changing the value of LogLevel to FFFF).
However, this did not have any effect (the log did not contain any
additional information).
All the setupapi.log had was Error 5: Access is Denied
I suspected that there was a problem updating the registry and found
that a set of values under a group named ati2mtag was blocked. Even
though I am an administrator I could not delete or modify the contents
of this group. It denied me access.
I would really appreciate a solution, to make those set of keys
accessible once again.
Thanks in advance.
- 3
- Windows XP Support >> How to get Admin password?Im fixing a Compaq pressario laptop for a friend. its got xp home, and
after installing sp2, it gets the blue screen, error stop c0000135 cant
find winsrv
the best I can do is use another winXP cd and get to the recovery console to
try and apply the fix from Microsoft
http://support.microsoft.com/default.aspx?kbid=885523#kb4
on deleting registry entries for the sp2, so it can boot.
Apparently while searching for a note about what the password might be, I
find it was sold at comp usa, and they bought a service plan, unconditional.
But guess what? they dont want to offer support, saying I needed to call
Microsoft to ask them what the Administrator password is.
It was setup by comp usa, who apparently setup the admin password. But they
say we would not know what it is and all the data will be destroyed on the
disk because the only way now is to wipe the disk and install everything
again. But I dont have any windowsXP disks, compusa kept them.
Well who cares, you have to buy xp, office, etc, not our problem. Besides,
its too complicated to work thru the registry, thats only for qualified
people, we cant help you, thats like way advanced or something.
Is there any solution?
tia
- 4
- Windows XP Perform Maintain >> STOP errors caused by a device driver....I hope someone can help me...
I keep getting the blue screen with STOP errors...when I
send the error report to Microsoft, they say the error was
caused by a device driver.
The only thing I've changed lately is my printer. I
uninstalled a Lexmark X73 & installed an HP1100, which I
ended up uninstalling also.
Any ideas??
Thanks,
Fun
- 5
- Windows XP Perform Maintain >> Internet Explorer ProblemMy brother and I run basically the same computers, Windows XP, on the same internet line. He is having a problem with Internet Explorer. Before, when he opened up I.E. it always opened up on his home page, Google.ca. Now it opens up to Microsoft Home Search (res://krrfa.dll/index.htmlC#96676), he has repeatedly tried to reset it to google.ca but it keeps reverting back to the Microsoft page. Any help would be appreciated in solving his problem, it has never happened om my computer. Thanks
- 6
- customize >> Can user and admin have the same IE?Hi,
I'd like to have my user account and Administrator account
basically use the same IE or same IE "browsing
experience", in other words, have the same toolbar menus,
same Favorites, etc.
Similarly, when I install theGoogle Toolbar as Admin, it
is not installed for my user account. Can this be
accomplished?
(It'd be nice if they could have the same Desktop, too,
but one thing at a time - I'd like XP to appear no
different between these accounts.)
- 7
- Windows XP Support >> >pps ViewerI have two friends that forward PowerPoint files to me. The second ones I
can open. The first individuals files can't be opened, at one time in the
past I had no trouble opening them. Something in the past two to three weeks
does not recognize them as power point files. In both peoples cases I use
PowerPoint viewer 2007.
Any suggestions appreciated.
- 8
- Windows XP >> Wincallid ???Has anyone got any idea what this executable (Wincallid.exe) is? I find it
odd that google doesn't give any hits at all on 'Wincallid'. It's residing
in C:\.
I'm running xp with servicepack 2
Carsten
- 9
- 10
- Windows XP Setup >> ShutdownMy computer used to turn off automatically when I went to
shutdown. Now, under XP, it says "Ok to turn off
computer".
How can I fix this?
Thanks!
- 11
- 12
- Windows XP Support >> Chinese characters taking over text in other programsI installed Chinese character support so I can type in Chinese as well as
English but it turned the text and menus in my Intel ProSet Wireless program
into Chinese. I have contacted Intel that said it was a Sony laptop problem
who then said it was a Windows problem. I can no longer view help files in
this program or menu boxes in English. I appreciate any help. Thanks.
- 13
- Windows XP Hardware >> help on Serial port support for Win XPWe are in manufacturing of EMC products.
We control our few equipment through computer. We have
used RS232 (COM1 OR COM2) as interface port. We have
developed our own application to run these equipment in
Visual Basic. Some applicaions are developed in older
versions of VB. We also include graphics server as a
supporting application. We have used graphics server 4.0
(which supports 16 bit windows).
Now our problem is when we connect one of these equipment
through RS232 port in Win 95 and Win 98 it works fine and
RS232 responds fine. But when we connect this equipmnt
through RS232 port in Win XP RS232 port slows down and
equipment do not work.
Please help us.
- 14
- Windows XP Setup >> Q: Scheduling Defrag (GUI)Hello all.
I want to run the GUI version of Defrag (DFRG.MSC) as a scheduled task,
but it doesn't work as expected:
Running this .MSC from the "Run..." or DOS box works fine. But if I put
"%WINDIR%\System32\DFRG.MSC" as command-line in a scheduled task, it
just hangs there (presumably awaiting input). Either that, or it starts
and exits right away, depending on the syntax I use.
What I want is for it to run automatically -- and -- perform a disk
analysis of C:
I also tried the following construct, but alas...
"%WINDIR%\System32\CMD.exe" /C START "" /B /I
"%WINDIR%\System32\DFRG.MSC"
(with/out "/I" and "/B")
I know I can use "DEFRAG C: /A", but I want the GUI version. Besides, I
tried that too and it still runs invisibly. Annoying.
Anyone know the magic formula?
Thanks!
M.T.
PS: Please answer within thread -- email is a decoy.
- 15
- Windows XP MovieMaker >> MoviemakerI have a GATEWAY 300 computer with WINDOWS XP home ed. I
would like to know how I can uninstall the program
MOVIEMAKER.I have no use for this program, I will never be
into movies. I have tried the normal way but the computer
won't let me delete the program, it says THIS PROGRAM CAN
NOT BE DELETED IT IS USED BY A PERSON OR PROGRAM. Another
reason for deleting it, my e-mail is effected by it and no
support group can help me. Any help you can give will be
greatly appreciated. Thank you. Henry Dettmann.
hummel@pronet.net
|
| Author |
Message |
Jupiter
|
 Posted: Sun Jul 11 11:45:47 CDT 2004 |
Top |
Windows XP Hardware >> Amd processor and Windows XP
i have a HP laptop with an AMD XP 1700+ processor half
the time it registers as a 655Mhz, I've downloaded the
AMD PowerNow patch with no luck any help would be thankful
Windows XP1192
|
| |
|
| |
|
Cari
|
| Posted: Sun Jul 11 11:45:47 CDT 2004 |
Top |
Windows XP Hardware >> Amd processor and Windows XP
This is nothing to do with Windows but everything to do with the clockset
settings in the BIOS. There should be something in the PC manual to tell
you how to enter the BIOS and adjust.
--
Cari
MS-MVP Windows Technologies - Printing/Imaging/Hardware
www.coribright.com
"eric.jones" <EMail@HideDomain.com> wrote in message
news:2a0aa01c46757$10334e30$EMail@HideDomain.com...
>i have a HP laptop with an AMD XP 1700+ processor half
> the time it registers as a 655Mhz, I've downloaded the
> AMD PowerNow patch with no luck any help would be thankful
|
| |
|
| |
|
BAR
|
| Posted: Sun Jul 11 19:49:04 CDT 2004 |
Top |
Windows XP Hardware >> Amd processor and Windows XP
A quick call to HP will have you out of your misery.
"eric.jones" wrote:
> i have a HP laptop with an AMD XP 1700+ processor half
> the time it registers as a 655Mhz, I've downloaded the
> AMD PowerNow patch with no luck any help would be thankful
>
|
| |
|
| |
|
Jim
|
| Posted: Sun Jul 11 20:51:19 CDT 2004 |
Top |
Windows XP Hardware >> Amd processor and Windows XP
Laptops do power saving to increase battery life, check
power saving settings.
--
The people think the Constitution protects their rights;
But government sees it as an obstacle to be overcome.
"BAR" <EMail@HideDomain.com> wrote in message
news:EMail@HideDomain.com...
| A quick call to HP will have you out of your misery.
|
| "eric.jones" wrote:
|
| > i have a HP laptop with an AMD XP 1700+ processor half
| > the time it registers as a 655Mhz, I've downloaded the
| > AMD PowerNow patch with no luck any help would be
thankful
| >
|
| |
|
| |
|
Richard
|
| Posted: Sun Jul 11 22:00:23 CDT 2004 |
Top |
Windows XP Hardware >> Amd processor and Windows XP
The front side bus speed is incorrect. Look into your bios and set it for
133. It is probably set for 100 now. This can happen if you shutdown the
computer during the P.O.S.T. It can cause the FSB to reset to a default
value.
Found this out due to my 4 year old Grandson! (-:
--
Regards:
Richard Urban
aka Crusty (-: Old B@stard :-)
"eric.jones" <EMail@HideDomain.com> wrote in message
news:2a0aa01c46757$10334e30$EMail@HideDomain.com...
>i have a HP laptop with an AMD XP 1700+ processor half
> the time it registers as a 655Mhz, I've downloaded the
> AMD PowerNow patch with no luck any help would be thankful
|
| |
|
| |
|
Nathan
|
| Posted: Mon Jul 12 02:45:36 CDT 2004 |
Top |
Windows XP Hardware >> Amd processor and Windows XP
Yup yup. My 2500+ always showed up as a 1700+ because of that stupid
FSB. Also, it never hurts to make sure your BIOS is completely up to date ;)
Nathan McNulty
Richard Urban wrote:
> The front side bus speed is incorrect. Look into your bios and set it for
> 133. It is probably set for 100 now. This can happen if you shutdown the
> computer during the P.O.S.T. It can cause the FSB to reset to a default
> value.
>
> Found this out due to my 4 year old Grandson! (-:
>
|
| |
|
| |
|
| |
|
Index ‹ Windows XP ‹ Windows XP Hardware |
- Next
- 1
- Windows XP >> Utility for restoring windows/applications at rebootHello,
Does anybody know if there are any 3rd party utilities/applications
which will restore the windows/applications that were running prior to
system shutdown or reboot? I could find a utility like this very
useful (think Firefox browser window restore).
Thanks
Mike McWhinney
- 2
- Windows XP Setup >> user login abnormalitywhen I go to login in under my admin user name it searches for a cd disk in
my drive and tells me there isn't a disk in it --- it doesn't matter what
kind of disk I put in , then it lets me login --- how can I get rid of this?
- 3
- Windows XP >> All downloads include .jpg extensionWindows XP & Netscapte 7.1. Regardless of the type of
file I try to dounload, the .jpg extension is added to
the end of it. For example, "filename.exe" would be saved
as "filename.exe.jpg". I can't fine anything in either
Windows or Netscape that will change this. Any ideas will
be greatly appreciated.
- 4
- 5
- Windows XP >> FaxingIf I no longer have the install CD for Windows XP and the
ability to send faxes was not installed on my computer,
is there a way to get the fax capability added to my
computer without the install CD?
- 6
- 7
- Windows XP Network >> Connecting to another computerI hope this is the right area to ask this question, but I am not sure where
else to turn. I am having a problem with one computer and I am sure there is
a setting I am missing.
When we do a connection to other computers on our network (all are XP
machines) by going to Start-Run-\\<computer-name>, most of the computers
respond by throwing up the "Connect to <computer DNS >" box asking for a user
name and password. However, I have one machine that just opens up and shows
all of the shared components (files, printers, etc.). When I try to access
any of the shared folders, it always gives me Access Denied. At no time on
when trying to connect to this machine do I get asked for user name and
password.
Any assistance will be greatly appreciated. Thanks - John
- 8
- 9
- Windows XP Support >> All Programs white screenI click Start and then All Programs. Initially I then find the All Programs
display is white and showing no detail. The display then freezes for about 45
seconds, does not react, and then reverts back to the desk display. After
this it reacts normally.
--
Ronner
- 10
- Windows XP >> Outlook ExpressHi. you all,for the last my Outlook Express comes up with an error message,---- "Your server has unexpectedly terminated the connection. Possible causes for this include server problems, network problems, or a long period of inactivity. Server: 'localhost', Protocol: POP3, Port: 110, Secure(SSL): No, Error Number: 0x800CCC0F
Have changed back to old settings in Add & Remove Progs, downloaded new patches, but Error still there, anyone got the slightest idea what i may have overlooked??? PLEASE
- 11
- Windows XP Support >> Blue Disc-checking screen on bootup -every time!I was helping a friend with a bad modem on a laptop running XP Professional
when I noticed that every time XP started on bootup I got the blue disc
checking screen that you can stop by pressing any key. Every time!
I carefully checked on shutdown that the correctâ??Turn Offâ?? button was
pressed and that Windows shut down properly - and that the power was not shut
off. On boot up however the same blue disk checking screen appeared. How do I
turn this feature off? Denzil.
--
Denzil
--
Denzil
- 12
- Windows XP Setup >> valid cd key no gooda buddy of mine was tryin' to fix his friend's son's computer, never had any
form of anti-virus/spyware let alone a firewall...turned out he had over 20
viruses on it...and was beyone repairable...so he formatted and tried
re-installing windows xp...it is a geniune windows pro cd, but it could not
fully install cuz it couldn't find rest of the files due to a sevre beaten up
disc, so he tried his own xp cd which was also genuine and put in the same cd
key that was used for the beaten up disc, and it wouldn't load cause it said
it wasn't a valid key...any ideas?
- 13
- Windows XP MovieMaker >> Can only save part of images but all of musicI need some advise. I worked 4 months on a family movie for x-mas. Now that
I have completed the project I went to save the project to either a CD or my
computer. Neither worked!!
I get a variety of problems each time I try. Either I get the error message
that states "Ensure the destination is valid and the origianl source still
exist, make sure there is enough disk space available" (Something like that)
or I will start to save but the estimated time continues to climb until I
eventually cancel. I actually got a CD to burn a few times, but only some of
my pictures were shown the rest were blank, all the music did record.
I have been on microsoft support line for 3 hours and they are now
escallating this case up. I see many people have this type of error but I
don't know what to do to resolve.
Should I cut the video in half and save twice??? I don't even know how to
do that? The total video is only 188MB which is about 22 minutes of images.
HELP!! Christmas is coming
- 14
- Windows XP Support >> IE 7 Firewall AlertI get a warning from BitDefender Firewall that "Internet Explorer is trying
to act like a server" when I open an Intellicast web page. I have a
screenshot of the pop-up.
- 15
- Windows XP Hardware >> PLEASE ANSWER! How to activate UDMA in WindowsXP ?In a same machine I've installed Win98SE and WinXP Pro, 2 hard disks (both
master) and 1 CDROM drive (secondary slave), that supports UltraDMA2.
Win98SE sees UltraDMA in all drives.
WinXP instead set UltraDMA only for hard disks. CDROM drive is set to PIO
Mode!
The WinXP setting for CDROM drive is correctly "Use DMA if available", but
it works in very slow PIO Mode.
Chipset is VIA KX133 of Asus K7V motherboard.
I upgraded CDROM drive to latest firmware.
How can I activate UltraDMA for CDROM drive in WinXP ?
Thank you very much
|
|
|