| svchost.exe cannot start due to missing dltime.dll |
|
 |
Index ‹ Windows XP ‹ Windows XP Perform Maintain
|
- Previous
- 1
- Windows XP Network >> XP/2K ICS Problems from client (LAN works well)Hello,
I have a problem with ICS on Windows XP Professional on one computer
(server), and Windows 2000 Professional on another computer as a client.
My LAN is fully working, I can share folders between the two computers and
ping each others without any problem.
I'm using two Realtek 8139 10/100Mbps (PCI) Fast Ethernet cards with a
crossover cable. I've disabled the ICF on the server and enabled Simple
File Sharing. Both Windows' are fresh installations (installed two or three
weeks ago), I didn't make much changes on them, just the necessary drivers
(all WHQL) and the Service Packs (for the client I've only applied SP3 to
Windows 2000 due to problems I've read about 3D Studio Max and SP4)
- From the server, I can access to internet, using my ADSL connection.
- From the client, I can ping and tracert addresses on my LAN and internet
but I can't display any website, I can't check my mails or use FTP, I can't
read Usenet either.
More details about my configuration:
-------------------------------------------
LAN settings on the server (Windows XP):
Computer Name: net
Workgroup: LAN
IP address: 192.168.0.1
Subnet mask: 255.255.255.0
I added my clients to %systemroot%/system32/drivers/etc/hosts on the
server:
127.0.0.1 localhost
192.168.0.3 workstation.MSHOME.NET
192.168.0.2 networks.MSHOME.NET
(192.168.0.2 is a Slackware installation I have on another partition of my
client computer, and I made sure that I didn't forget the two blank lines
and the end of the HOSTS file.)
Here is the contents of %systemroot%system32/drivers/etc/hosts.ics on the
server:
192.168.0.1 net.mshome.net # 2008 8 5 22 6 53 59 172
192.168.0.3 workstation.mshome.net # 2003 8 4 28 12 37 54 271
-------------------------------------------
LAN settings on the client (Windows 2000 Pro):
Computer name: workstation
Workgroup LAN
IP address: 192.168.0.3
Subnet mask: 255.255.255.0
Default Gateway: 192.168.0.1
Preferred DNS Server: 192.168.0.1
DNS suffix for this connection: MSHOME.NET
-------------------------------------------
I've already tried, without success, to:
- set my ISP's DNS addresses to the "Preferred" and "Alternate DNS Server"
on the LAN connection on the client
- set the gateway (192.168.0.1) as the default gateway on the server as
well
- use "MSHOME" as a workgroup name
- disable some of my firewall rules (Kerio Personal Firewall 2.1.5)
- disable the firewall itself
- uninstall, physically remove and reinstall the NIC's on both machines
I've also noticed that exactly the same thing happens on Slackware, I can
ping, I do receive Echo Replies and I can tracert URLs, it resolves the
domain names into their IPs but I can't access to internet via any browser.
Any help would be greatly appreciated.
--
Sébastien
- 2
- Windows XP Security >> Outlook Express is Removing AttachmentsFor the first time I downloaded and installed a Windows
Update. It happened to be the XP Service Pack.
As soon as I did, my Outlook Express started removing
every attachment I received, giving me the message that
it had removed an "unsafe attachment." I know the
senders in each instance, and none of these attachments
are "unsafe."
Can someone tell me how to keep my OE attachments. I
have my security settings on Medium.
Thanks.
- 3
- Windows XP Network >> XP Pro Workstations hanging when accessing files on Win2K ServerI have recently upgraded 10 workstations from Win 2K Pro
to XP Pro. The users are having a major problem when
they try to access their documents of shared folders on a
Win 2K Pro Server. An example would be when they try to
open a word 2k doc it hangs and takes a very long time to
open then is slow to react when they enter new data. Any
ideas to what would cause this slowdown? Thanks so much
for any advice.
- 4
- Windows XP Basic >> Where best to install MS Office XP?Hi
I'm preparing to upload/install Microsoft Office XP. Is it possible and or
advisable to place the program on a separate partition? If this is advisable
what are the processes and procedures for accomplishing this? I've done some
research on this but would welcome any recommendations anyone has on reading
materials. Thanks.
- 5
- Windows XP >> internet trackingI'm using xp pro fully updated/patched behind a firewall router and ZA latest
version
I have a question about how various web sites get ahold of your e-mail
address.
I don't visit porno sites, nor questionable sites, but still I get filth
spam, and generic spam, I don't use my valid e-mail address for posting
questions, nor answers, so how the blanky blank do these filth spammers get
my e-mail address??
some are broadcast to undisclosed receipent so that I understand, but not
the ones directed to me...
if I do not use my pc for a few days the filth dwindles down, but when I use
the internet for anything, I suddenly get swamped with it.
- 6
- 7
- Windows XP >> Problem installing .NET frameworkI've tried to install the .NET framework seversal times
using the windows update. However the install process
takes hours and never completes. The progress bar fills
up but nothing happens. Using windows task manager it is
seen to be still responding. What is the next step to get
the .NET framwork to install?
- 8
- Windows XP Support >> user account login screenWhen Windows XP Home Edition first boots and shows the users login
screen is there any possible way to have the On-Screen Keyboard be
available at that time? Is there anywhere within the registry to
accomplish this? I'm a disabled user who has to rely on speech
recognition software, but I am able to use a mouse adequately enough to
use the On-Screen Keyboard for manual input when required. I would
like to be able to somehow input a password when Windows boots for more
security.
Thanks!
- 9
- Windows XP Setup >> SP Pro OEM Install ProblemsI have built a machine that I am attempting to install a new OEM XP pro (sp2)
on that stalls at the "Starting Windows" blue screen. I can load from the CD
using another computer and I can install 2000 on the PC in question. When I
load from another machine that uses the same chipset then install the CD in
to the desired machine I get to the Windows XP black screen, it fades and I
get no farther. When I load 2000 on to the desired machine everything works
okay. I have tried to use a XP pro preinstall CD but I get wierd IDE errors
that make no sense at all. I would like to get XP pro on this but it is
proving to be quite a challange,...any ideas?
--
Dan
- 10
- Windows XP Support >> Cannot Log in to windowsI turn the computer on and once it starts up it goes to the screen where
there is normally an icon to click for the user you wont to log in as.
However, there are no user names/icons on the screen it just says welcome and
has the "Turn Off Computer" in bottom corner. I tried to enter Safe Mode to
see if Administrator name appears as it says in the Windows XP manual... but
no user names appear there either. Is there any way I can login?
- 11
- Windows XP Security >> ERROR:unable to start the task scheduler serviceHello-The LiveAuto Update for Symantech/NORTON anti virus
has been OFF for 2 monthes now. I get errors from "not
connected" to "trigger file not found" when attempting to
trounle shoot. Port 135 is on at my ISP as of today..and
has never been shut down. Withour having to re-install XP
Home and NSW...could someone help me here, please.
Thanks
getsteppin
- 12
- Windows XP Support >> Multiple versions of same DLLI am trying to use third party controls in a VB application but they require
older versions of OLEAUT32 and OLEPRO32. I was able to copy the older
versions into the win/sys32 directory but after restarting my machine the
dlls reverted back to their newer counterparts. When I run the VB app, I
get a 429 ActiveX error.
Can I have both versions of the OLE* dlls residing on my machine? If so,
how do I tell VB (design and run time) to use the older versions? Thanks
- 13
- Windows XP Security >> Windows XP Security Update Not Showing UpWhen I click on the area to install the latest security update for Microsoft
XP to patch the latest flaw, my computer tells me that all updates are
installed. However, the last dated installed update is a fix from June in my
history of updates section.
Is the new security patch not currently available for download, even though
the site says it is? Anyone else having this problem? I have SP2 installed,
which the patch is supposed to be for.
Thanks for any help.
- 14
- Windows XP Security >> Program received with Windows XP had suspected virus from windows.My system included a program which stated that it was
from Microsoft, but, I was told that it was a virus which
will wipe out your computer. The program was in my new
computer when I received it. The name of the program
is " jdbgmgr.exe " and it's emblem is a teddy bear. My
computer had it entered in windows, in two places. Once
in "C:windows\last good\system32\" and
in "C:windows\system32". Norton and the other Virus
detecters do not detect that it is in the computer. Can
you check this out and tell me if I was miss informed?
- 15
|
| Author |
Message |
Marc
|
 Posted: Tue Jan 11 08:57:41 CST 2005 |
Top |
Windows XP Perform Maintain >> svchost.exe cannot start due to missing dltime.dll
When I log onto windows everything loads, but then a message appears saying
this application (svchost.exe) cannot start because the following dltime.dll
file is missing,
this first occured after Norton Antivirus alerted me that a virus had been
deleted
How can I repair this problem as I dont have any back ups of the file
I have also noticed a variety of outbound activity from my computer
appraently trying to connect to other computers,this happens everytime I
connect to the internet, and only begun after this file disapperared.
Any help apprecitaed
Windows XP1230
|
| |
|
| |
|
Ted
|
| Posted: Tue Jan 11 08:57:41 CST 2005 |
Top |
Windows XP Perform Maintain >> svchost.exe cannot start due to missing dltime.dll
That file belongs to a keylogging trojan known as Backdoor.Tofger. The
trojan horse program may have been included as an attachment to a spammed
email.
You must keep your virus definitions updated. This trojan was first
discovered in 2003. Set Live Update to run automatically and install virus
signature updates while you work.
For manual removal instructions:
http://securityresponse.symantec.com/avcenter/venc/data/backdoor.tofger.html
--
Ted Zieglar
"LLewellyn" <EMail@HideDomain.com> wrote in message
news:EMail@HideDomain.com...
> When I log onto windows everything loads, but then a message appears
saying
> this application (svchost.exe) cannot start because the following
dltime.dll
> file is missing,
> this first occured after Norton Antivirus alerted me that a virus had been
> deleted
>
> How can I repair this problem as I dont have any back ups of the file
> I have also noticed a variety of outbound activity from my computer
> appraently trying to connect to other computers,this happens everytime I
> connect to the internet, and only begun after this file disapperared.
>
> Any help apprecitaed
|
| |
|
| |
|
LLewellyn
|
| Posted: Wed Jan 12 02:37:03 CST 2005 |
Top |
Windows XP Perform Maintain >> svchost.exe cannot start due to missing dltime.dll
OK thanks for the pointers .I have removed the error messgae by following the
information at the link and simply turned off the system restore,the comp now
boots normally.
Although there is still the problem of the unknown dialling activity shown
one of the firewalls (currently running ZAlarm and Preventon) Preventon shows
a large log file of outbound attempts ,it never showed anything like this
before.
I ran a utitlity (NOADWARE) which supposedly searched for malicious dialers
and it came up with four located in the WINDOWS folder I deleted three but
face this lasst problem of not knwoing if its safe to delete the last as
there are two icons both named EXPLORER, according to NoAdware one of them is
responsible. I am not keen on making backups of the files incase they are the
infected
Q.Will deleting these files stop windows xp running normally ?
Q.Is it likeley that its is safe to delete them as they are problably called
explorer
so I would overlook them and keep them ?
"Ted Zieglar" wrote:
> That file belongs to a keylogging trojan known as Backdoor.Tofger. The
> trojan horse program may have been included as an attachment to a spammed
> email.
>
> You must keep your virus definitions updated. This trojan was first
> discovered in 2003. Set Live Update to run automatically and install virus
> signature updates while you work.
>
> For manual removal instructions:
> http://securityresponse.symantec.com/avcenter/venc/data/backdoor.tofger.html
> --
> Ted Zieglar
>
>
> "LLewellyn" <EMail@HideDomain.com> wrote in message
> news:EMail@HideDomain.com...
> > When I log onto windows everything loads, but then a message appears
> saying
> > this application (svchost.exe) cannot start because the following
> dltime.dll
> > file is missing,
> > this first occured after Norton Antivirus alerted me that a virus had been
> > deleted
> >
> > How can I repair this problem as I dont have any back ups of the file
> > I have also noticed a variety of outbound activity from my computer
> > appraently trying to connect to other computers,this happens everytime I
> > connect to the internet, and only begun after this file disapperared.
> >
> > Any help apprecitaed
>
>
>
|
| |
|
| |
|
| |
|
Index ‹ Windows XP ‹ Windows XP Perform Maintain |
- Next
- 1
- Windows XP Setup >> long delay on start upWhen my machine starts (Win XP Pro). The system hangs
indefinitely on the Welcome screen. It will stay at that
screen until I press ctl-alt-del, then it continues to
load. Any help will be appreciated.
- 2
- Windows XP Update >> Windows Update KB898461Hi,
I am unable to download the recent update KB898461. I have got automatic
updates configured. When downloading it starts and the comes back with a
message saying update not successful. I have tried downloading the file
directly from the KB Info screen and it starts to backup registry and install
files but then comes back with a set-up cancelled message. I get no error
messages. Do I need to install it ?
--
Broadband007bond
- 3
- Windows XP Network >> NetBEUI network-can't 'see' other Workgroup PCs, but Search findsI'm just wondering if any of the recent MS security patches has affected my,
until lately, properly functioning NetBEUI home Workgroup network by making
NetBIOS over TCP/IP(--> Enabled) mandatory (or ?).
I have tested w & w/o my ZA Free 7.0.733.000 pers. s/w firewall (previous ZA
vers have never been an issue (as one would expect for NetBEUI), as I believe
they are only concerned with TCP/IP traffic).
Per PChuck's Network page, I have also examined:
HKLM\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters\Hidden -->
'Hidden' key does not exist
HKLM\System\CurrentControlSet\Control\Lsa-restrictanonymous -->0
HKLM\System\CurrentControlSet\Services\LanManServer\Parameters-RestrictNullSessAccess --> 'RestrictNullSessAccess' value does not exist
My Computer Browser service is set to Automatic but is typically not Started
when examined initially. FYI - the dependenices: Server & Workstation
services are Started and set to Automatic. Even if I manually Start the
Computer Browser service, NetBEUI connectivity is not restored.
Network details:
I'm using NetBEUI for an XP SP2/Win98 home network with Client for Microsoft
Networks and File and Printer Sharing for Microsoft Networks bound to NetBEUI
only.
I have QoS & TCP/IP installed with NetBIOS over TCP/IP-->Disabled (on
purpose).
My ADSL modem connects to a 10Mbps 4-port hub, then to a BEFW11S4 wireless-B
broadband router that has four 10/100 RJ-45 + WAN ports. Port 1 connects to
a 'cascaded' SMC7008BR broadband router (seven 10/100 RJ-45 + WAN ports)
using a CAT5 crossover cable to Port 7 (not the WAN). Both routers support
several PCs.
As my ISP allows 2 dynamic IPs, I connect my main workstation to the 4-port
hub directly using a 10Mbps NIC with only TCP/IP bound and a separate 100Mbps
NIC with only NetBEUI bound which connects to the SMC7008BR and my home
Workgroup network.
The other IP from my ISP goes to the BEFW11S4 and it distributes private IPs
to all other PCs on my home Workgroup network.
- 4
- 5
- Windows XP Support >> Hard drive crash with no recovery diskMy HD suffered a mechanical failure and I cannot find the system recovery
disk (*&!). The PC had a manufacturer-installed Home edition of XP
(registration number is on the case) and I paid for the Pro upgrade (for
which I have the disks). I'm going to replace the HD and load everything
from scratch, but I don't have XP home disks. The system recovery disk for
my pc (HP pavilion 7955) is nowhere to be found on the web (or at HP)(*&!).
What are my best (least expensive) options for getting and loading an
authentic version of XP home on this new HD?
Thanks!
--
Tom
Indianapolis
- 6
- 7
- Windows XP Security >> WFXMSRVRHey,
Sorry if this is already a thread but my ADD and OCD just won't allow me to troll thru 194 different headings...
I am running XP home and just updated to SP2(beta). Seems quite nice, but one prob I am having is with the windows security center. Each time I go online (dial-up) I get a warning about "WFXMSRVR" of which I can ignore,stop,etc. What is this (excuse my ignorance) and what is the best way to deal with it?
PLEASE do me a big favor and just answer to my email address,... I'm not to good w/ newsgroups! Sorry! :>
\geo
--
georgedmalmos@hotmail.com
- 8
- Windows XP >> FormatingI would like to start fresh and uninstall my windows XP
and re-install. I try to format C drive from DOS but get
a message "Volume is being used by another process" How
can I fix or get around this
Thanks
- 9
- 10
- Windows XP Setup >> Windows Activation KeyI downloaded a copy of windows xp from our MSDN subscription and I was
installing it on a newly formated disk and I was asked to input the
activation key. Upon entering the key, I was notified that it was invalid
even though I believe to be valid. If there any way to verify the activation
key?
--
CourtJac
- 11
- Windows XP Security >> can't ping xp workstation from domainI can join my XP workstation to the 2003 domain; browse mapped drives on the
server; print etc but I can't reach the workstation from the server or
anywhere else. I can't even ping the workstation although I get a reply when
I ping the server from the workstation. Any ideas as this one is baffling
me?
- 12
- Windows XP Support >> CMI8738 6 channel surround sound problemsI recently purchased a C-media 6 channel surround sound card off ebay.
It didn't come with any drivers, so I downloaded these off the C-media
website (http://www.cmedia.com.tw/?q=en/driver). After installation,
the sound card works, but I only get audio in the front speakers
('audio out'). I get no sound in the rear speakers, or in the
subwoofer/centre speakers.
Any ideas on how to fix this?
cheers, marcus
- 13
- Windows XP Security >> Locking Specific Folders With A PassordI want to limit acess to a ceratain folder. I have tried
Hiding but I need more security. Also, Zipping and then
adding a password is not safe. The Zipped Folder Can Be
Deleted. Originals must be kept unprotected. Is there
anyway I can keep my folder and put a secure pass lock on
it without additional software?
- 14
- Windows XP >> Send To settingsHello, Whenever I right click on a file in Windows Explorer I get a fly out with "Send To" options. Currently there are 9 places that appear when I click on the Send To fly out. None of the places are what I want. I would like to make a few of the places folders that I need to send the file to. Is there a way or place to remove and/or add places to the "SEND TO" Menu so that I don't need to drag and drop the file into a folder everytime I want to copy or move it ???
Thanks in advance
Al Banks
- 15
|
|
|