| control panel not working |
|
 |
Index ‹ Windows XP ‹ Windows XP Perform Maintain
|
- Previous
- 1
- Windows XP Support >> RUNDL32.exeHello,
My computer will start up all the way to the log in screen. When
access an account all I get is the blank icons and nothing will work b
mouse or hotkey. I do have dial up, so explorer works and somehow I ca
access AOL.
I have tried to start up in safe mode to no avail, I can save, print
or copy data. I even bought the upgrade XP disk which would not wor
since no *.exe files will run. All I get is a RUNDL32.exe error o
this file does not have an associated program
Any ideas on how to fix or do I eed to get a complete XP edition an
wipe out my hard drive?
Thanks,
Fran
--
Maxumman
- 2
- Windows XP Network >> ip o.o.o.o and DHCP or tcp/ip bt services don't start no internetProblem Description:
I have had a problem with not getting to the internet after uninstalling
Mcafee Privacy Service. All I get is a 0.0.0.0 IP all other computers
are reaching the internet find through this router. I have installed
the winsock fix ran all suggestions by Mcafee support. Tried to
release the ip and it says it can't because it can't find the file. I
have ran the netsh interface reset all and stil cannot renew the ip
using ipconfig /renew.
DHCP TCP/IP BT services do not start and will not start when triggered
says a service dependancy failer but all of the dependent services are
off and can't be started.
I don't want to reinstall xp because the computer came with it preloaded and
no cd's I was informed by the manufacturer that I would have to buy retail
copy. Please advise me as to what to do.... thanks
- 3
- Windows XP Setup >> Moving OutlookI helping a friend setup a new PC and we need to move MS Office from
the old PC to the new. He has forgotten his mail passwords so I need
to find a way to move the Outlook configuration from the old PC to the
new one. Anyone know where this info is stored (files and/or registry)
--
Lars-Erik - http://home.chello.no/~larse/ - ICQ 7297605
WinXP, Asus P4PE, 2.53 GHz, Asus V8420 (Ti4200), SB-Live!
- 4
- 5
- Windows XP Support >> Shared FolderHi, my shared folder has disappeared from windows explorer. I have XP Home
with guest, 1 other user and 1 administrator accounts. Noticed a few days
ago that I cannot save changes to a file in the shared folder while in a
user (limited account) or guest accounts.
Thanks for any advice
Dale
- 6
- Windows XP Update >> Update for windowsI have tried to update 'live photo gallery' but keep getting 'update not
installed' I have an error code 0x6b9, is there a solution? any assistance
would be greatful
- 7
- Windows XP Support >> Volume issues with sounds from the OS onlyHello,
I've been struggling with a problem for a few days now, and am tired of
banging my head against the wall. Hopefully someone here can help.
Sounds played directly by the OS have their volume much too low. This
refers to sounds such as those heard when you launch or shutdown xp. If
I open the control panel and go to the "sounds and audio devices"
application, then select the "sounds" tab, and select any of the sounds
at the bottom ("Asterix", "Critical Stop", etc...) and hit the little
play icon, the sound is still very low. HOWEVER, if I browse directly
to the directory that contains these sound files ("windows\media") and
double click any of them, windows media player will launch and play the
sound at normal volume.
Another example of my issue is the sounds launched during the autoplay
of application / game CDs. Again, if I simply have the cd autoplay,
it's launch sound is much too low, but if I browse to the autoplay
directory and double click on the appropriate .wav file, it sounds at a
normal volume level. Sounds are also too low when I "test direct sound"
from the DXDiag app.
Obviously, my sound card is properly installed, or I would have no
sound at all. Selections in the volume control application are all near
max, and not muted.
As I mentioned previously, it appears that the issue is with the volume
of the sounds only when XP itself is generating them. All is fine when
another application tries to play the same sound files.
For those interested, I'm using a SoundBlasterLive!Value with driver
emu10k1m.sys version 5.12.0001.3300. Speakers are Creative Cambridge
Soundworks FPS (four speakers + sub woofer).
Please help.
Regards,
Joel
--
jogster
- 8
- Windows XP Support >> PC doesnt power offHello
I have win xp machine which does not power off on shut down.
Windows shuts but leaves me with the message "you can now shut down your
computer"
Is this something to do with ACPI settings in the BIOS?
Thanks
- 9
- Windows XP >> Lock-up/CrashBad problem. Frequently, usually while browsing internet, my computer locks up (cursor stuck, nothing moving, hdd light off on case) and NOTHING works (esc, ctl-alt-del, break). Have to power down and restart. I tried a clean install of xp home, still same problem. Downloaded newest version of directx, all my drivers, etc. Any hints?
dxdiag posted below:
John Bayerl
------------------
System Information
------------------
Time of this report: 12/27/2003, 15:01:52
Machine name: FUNZILLA
Operating System: Windows XP Home Edition (5.1, Build 2600) Service Pack 1 (2600.xpsp2.030422-1633)
Language: English (Regional Setting: English)
System Manufacturer: VIA Technologies, Inc.
System Model: VT8366-8233
BIOS: Award Modular BIOS v6.00PG
Processor: AMD Athlon(tm) XP 2000+, MMX, 3DNow, ~1.7GHz
Memory: 768MB RAM
Page File: 93MB used, 1785MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0b (4.09.0000.0902)
DX Setup Parameters: /PackageInstall
DxDiag Version: 5.03.0001.0902 32bit Unicode
------------
DxDiag Notes
------------
DirectX Files Tab: The file directx.cpl is a debug version, which will run slower than the retail version.
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Music Tab: No problems found.
Input Tab: No problems found.
Network Tab: No problems found.
--------------------
DirectX Debug Levels
--------------------
Direct3D: 0/4 (n/a)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (n/a)
DirectMusic: 0/5 (n/a)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)
---------------
Display Devices
---------------
Card name: NVIDIA GeForce4 Ti 4600
Manufacturer: NVIDIA
Chip type: GeForce4 Ti 4600
DAC type: Integrated RAMDAC
Device Key: Enum\PCI\VEN_10DE&DEV_0250&SUBSYS_00000000&REV_A3
Display Memory: 128.0 MB
Current Mode: 1024 x 768 (32 bit) (60Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
Driver Name: nv4_disp.dll
Driver Version: 6.14.0010.5216 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 10/6/2003 14:16:00, 4246528 bytes
WHQL Logo'd: Yes
WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: nv4_mini.sys
Mini VDD Date: 10/6/2003 14:16:00, 1550043 bytes
Device Identifier: {D7B71E3E-4110-11CF-D077-0A2002C2CB35}
Vendor ID: 0x10DE
Device ID: 0x0250
SubSys ID: 0x00000000
Revision ID: 0x00A3
Revision ID: 0x00A3
Video Accel: ModeMPEG2_A ModeMPEG2_B ModeMPEG2_C ModeMPEG2_D
Deinterlace Caps: {212DC722-3235-44A4-BD29-E1652BBCC71C}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{212DC723-3235-44A4-BD29-E1652BBCC71C}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_MedianFiltering
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{212DC722-3235-44A4-BD29-E1652BBCC71C}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{212DC723-3235-44A4-BD29-E1652BBCC71C}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_MedianFiltering
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
- 10
- 11
- Windows XP >> strange directories in my root directoryI have just updated my Windows XP Home Edition via the
Windows Update function. Now I got 4 new folders in my
root directory. One of them is
called "43514a768c2dc244769476e" and the others look
alike. They all contain a folder called "sp2".
The problem is: I don't want them there and they cannot
be deleted. Can anyone help - PLEASE?
Marc
- 12
- Windows XP Network >> XP Home Networking Issues - 3 PC's - SP 1I have 3 pc's with identical hardware specs. All Pentium 4 2.4ghz and Netgear
100mbps ethernet cards connected to each other through a 10/100 hub.
Hard-wired not wireless. All cables have been tested and work.
I can share an internet connection between the computers. But I cannot
access any of the shared files or folders on any of the machines. And none of
the other machines see my pc on the network. But I can see them sometimes.
I have disabled all the firewalls, repaired the IP, set NetBIOS over TCP/IP
and even assigned all the pcs with their own IP addresses - 192.168.0.1, .2,
.3 and so on. And I've run the Network Setup Wizard a billion times and only
get errors or when its completed nothing works.
The error I get when trying to access the workgroup via My Network Places
says that the shared folder/pc is unavailable...depsite being able to share
the net access. And I cannot add the other pc's as a new network place. It
can't find them.
I can't ping any of the other pc's either. I get the "Request Timed Out".
And the net connection sharing goes in and out. Sometimes works and sometimes
doesnt.
If you could, please email me directly with any responses you may have.
email - chrisraypierce@hotmail.com
Thanks.
Also. They all have Service Pack 1, not 2. 2 will not work on any of the
pc's. It locks them up.
- 13
- Windows XP MovieMaker >> leadtek tv tuner card crashes mm2Movie Maker 2
WinXP Home sp2
Winfast TV 2000 Expert (Leadtek)
Hello
The main problem is that when I try to capture from the Leadtek card,
which is listed as the capture device when I click on the capture,
Movie Maker immediately crashes ..
History
Totally cleaned up machine with defrag, clean up etc. Installed sp2.
Everything went fine. Installed a pci firewire card. Works fine -
managed to capture video from Sony camcorder via firewire into mm2.
TV capture card is working fine for viewing but when I try to capture
via mm2, mm2 crashes.
I went to the PapaJohn site - does this apply to this situation ..
"11/10/02 - Microsoft - 99.9% of s-video ports are TV-out ONLY.
Therefore, although you can 'switch' output so that the signal that
used to go to the monitor will go to the camcorder or the TV, it does
not work the other way.
To capture analog video you need a graphics card with VIVO (video in
and video out) capability (look at the ATI All in Wonder ranger) or a
specialized analog capture card such as the Dazzle, Pinnacle or
Hauppage range."
If not - is there any setting I am missing, or is this just one of
those incompatabilities?
Many thanks in advance
Deb
- 14
- 15
|
| Author |
Message |
pookow
|
 Posted: Sat Mar 19 16:14:22 CST 2005 |
Top |
Windows XP Perform Maintain >> control panel not working
I have tried to go to the kelly page and downloading #255 or #256 which ever
one it is but it still didnt work what else can i do.
--
Crazyk2k5 Thanks
Windows XP765
|
| |
|
| |
|
Walter
|
| Posted: Sat Mar 19 16:14:22 CST 2005 |
Top |
Windows XP Perform Maintain >> control panel not working
Do a search in system32 for all *.cpl files.
Now the trick.
One at a time double click each file to see if it runs. If one fails to run,
rename it, do not delete, then try control panel again.
--
Walter Clayton
Any technology distinguishable from magic is insufficiently advanced.
"Crazyk2k5" <EMail@HideDomain.com> wrote in message
news:EMail@HideDomain.com...
>I have tried to go to the kelly page and downloading #255 or #256 which
>ever
> one it is but it still didnt work what else can i do.
> --
> Crazyk2k5 Thanks
|
| |
|
| |
|
| |
|
Index ‹ Windows XP ‹ Windows XP Perform Maintain |
- Next
- 1
- Windows XP Security >> program privelegesi have my 1 computer set up with xp pro with 1 admin acct and 1 limited
account and most programs wont run on the limited acct and i cant seem to
figure it out any help would be appreciated
- 2
- Windows XP >> Freebie links updateNot the best, not the worst, but very popular and free:
Free anti virus:
http://free.grisoft.com/doc/5390/us/frt/0?prd=aff
http://www.avast.com/eng/download-avast-home.html
Free fire walls:
http://www.personalfirewall.comodo.com/
Free anti spyware etc:
http://www.spybot.info/en/download/
http://www.javacoolsoftware.com/spywareblaster.html
http://www.winpatrol.com/download.html
http://www.superantispyware.com/downloadfile.html?productid=SUPERANTISPYWAREFREE
http://www.siteadvisor.com/download/ie.html
http://www.mvps.org/winhelp2002/hosts.zip
http://www.funkytoad.com/hoster.htm
http://www.ccleaner.com
Free news readers:
http://www.40tude.com/dialog/
http://xnews.newsguy.com/
Free public news servers:
http://www.newzbot.com/
Free news filters:
http://www.nfilter.org/
http://www.arcorhome.de/newshamster/tgl/misc/hamster_de.html
Free mail filters:
http://sawin32.sourceforge.net/
- 3
- 4
- Windows XP >> Offline Files/Group Policy QuestionI enabled offline files via GPO. I did not configure the setting "Do not
automatically make redirected folders available offline". We redirect "My
Documents" to a network location. Everyone's "My Documents" automatically
started synching when they logged on or off. I disabled the "Do not
automatically make redirected folders available offline" setting. Everyone's
"My Documents" continues to sync. Even if you tell it not to, after reboot,
it continues to sync. Any help would be greatly appreciated.
- 5
- Windows XP >> Problems setting up wireless routerI've set up two wireless routers before but am having problems setting up a
third. When I try to set up the box using
http://168.0.0.0 (can't remember the IP address) it doesn't see the router.
The router was previously used on another computer system so was previously
setup.
Anyone have any idea why it's not communicating?
- 6
- Windows XP >> Missing files on desktop after reboot!!!!!!The problem is i will have some files saved onto my
desktop such as a picture or a file or folder. After i
shut down my computer and reboot it or restart it up i
look on my desktop and my files are all deleted. They are
now missing. I can refind the files but i need to make my
computer so that it wont happend again. This is the
second time that it has happend to me the last two days.
I would really appreciate this. Just email me back if you
can help me solve my problem or you have any other
questions i will be happy to answer for you and help you
out also. Thanks once again. Amanda~~~ email:
sexysurfbum@hotmail.com
- 7
- Windows XP Update >> Service Pack 2 download failedI had to repair my windows XP installation yesterday and I've updated the
windows update software but now it will not let me download the SP2 it
simply fails with no reason given - can't even start the download. Please
Help
- 8
- Windows XP Setup >> Installing Windows Registry Repair ProI am trying to install this from a CDrom,and for some reason I can't do it.
Can anyone tell me the instructions to how to install it. I need it really
badly,before I have major problems with my computer,so answer me as a.s.a.p
please,thanks.
- 9
- Windows XP Security >> Redundant Automatic UpdatesAutomatic updates keep reinstalling the exact same update
over and over (it's a Security update for XP-KB835732.
This has been happening over the past few weeks
(actually, just since the new Win Updates website went
up). A few times, I've let it completely run through, but
it's just getting old now. It's been prompting me to
install this update AGAIN about 6 or 7 times a day now.
Any thoughts/help?
- 10
- Windows XP >> System Error LogDuring the past one week, everything when I want to turn
on my PC, it always hung that I need to reboot it. I
update the Anti-virus and sure that no virus in my PC.
After I review the System Error Log, there are two
errors. One is "IPNATHLP", Event ID is 32003. The other
one is "Service Control Manager" Event ID is 7031. May I
know how to solve these problems??
Pls reply to my email address: micfan@hongkong.com
- 11
- Windows XP >> Reloading CD softwareI just installed a new DVD-CD RW burner on my Dell Optiplex, and when
I tried installing the Nero software is apparently deleted my old Nero
software AND it nuked the Microsoft drivers. The system "sees" the
drive (it is in the hardware list under My Computers), but it does not
show up in the list of drives under My Computer and also has a yellow
exclamation mark by the device. Tried uninstalling and reinstalling
the device. It cannot install the driver software. So, now in order to
repair the driver/system I need to load the CD. Catch 22. There seems
to be NO place where you can download and install the Microsoft
drivers for the drive (its a Sony and it is my understanding they use
the Microsoft drivers).
Does anyone know a way around this Catch 22? Why doesn't Microsoft
have a place where their drivers can be downloaded and installed,
especially the crucial ones like the CD??!!
- 12
- Windows XP Hardware >> Kofax cardI have had the pleasure of being given the project of fixing our
Scanner PC's. We run a Kodax DS 7500 scanner connected to a pc running
Win 95 via an Adrenalin 1700 s Kofax card. the program that does our
scanning is a third party software program which does some barcode
recognition. The problem as I understand it is that we have previously
been unscessful in getting the scanner, pc and program to work together
under an operating system later than win 95. Apparently there have
been issues getting the barcodes to be read.
The third party software developers tell me that it is because the
Kofax card cannot read barcodes under a later OS.
Is this true? Any suggestions? unfortunately there is a lack of
documentation and/or knowledge here.
Appreciate any advice.
Dave
- 13
- 14
- Windows XP Support >> Can't enlarge pictures on ebay, etcSomebody please help. When I'm on ebay I'm not able to enlarge pictures.
Also, I just recently purchased McAfee Viruscan. When I try to download I'm
told to allow pop-ups and then click "Start". When I click start, nothing
happens. Any suggestions.
- 15
- Windows XP >> Is a memory manager worth the effort?i have an Intel 4 3.2 GHz, 250MB cache, and 2 GB of RAM. Page File is set to
'suggested' size of ~ 3 GB.
Question: Would purchasing a memory manager be worth my time and money?
Seems like just another program intecepting data traffic, which seems it
would slow down overall performance. But they claim to speed up the PC
performance.
What's the real story?
|
|
|