| Can I install Microsoft Office 2000 |
|
 |
Index ‹ Windows XP ‹ Windows XP
|
- Previous
- 1
- Windows XP Support >> download problemsi get this message when i am trying to down load, "source file could not be
read, contact server administrator", when downloading. They are rather large
files, 50 to 100 megs, i am using regular dial-up, they end up being 4-5 hour
downloads, they get half way thru, then the error message. any ideas? it
happened on 2 different web sites, with 2 different computers, with 2
different files.
- 2
- customize >> standby mode with multiple user profilesI have just created user profile for my daughter. Before
that, there was only 1 profile on my system, and
everything was hunky dory. Since adding the extra
profile, my computer will not go into standby mode. The
settings in my profile are set to go to standby after 20
minutes. In her profile it will not allow me change the
settings. So, how can I get A: the system to go into
standby mode, and B: how can I change the settings in her
profile?
Thanks
- 3
- Windows XP Perform Maintain >> XP SP2Help??
After installing XP service PK2, my dial-up takes forever
to load webpages. B4 update they lodaed per the connection
speed, now they can take as long as 10 min regardless of
connection. reply here or email welcome.
THX
Ceal
- 4
- Windows XP Network >> Incoming Connection SetupHello!
I am trying to configure my home computer to accept VPN incoming
connections. The only device I can select to accept these connections is
"Direct Parallel (LPT1). Can I tunnel through the internet from a separate
location to gain access to my home network via home computer's network card?
Thanks
Nathan
- 5
- Windows XP >> Minidump Help needed hereBasically im getting the good old The system has recovered from a serious error message. Comp just freazes on me while playing any 3D game
Error Report Content
C:\Windows\Minidump\Mini040604-01.dm
C:\DOCUME~1\MONK\LOCALS~1\temp\WER6.tmp.dir00\sysdata.xm
I'm also getting a diffrent error (No minidump tho) while connected to the internet. I get the send/ don't send message then it just disconnects me
I tried reformatting my HD/Reinstalling new drivers but no luck. In fact start getting the errors as soon as windows first boots up. I swapped all of my hardware (Minus HD) into another comp and all works fine. I'm at a loss, Power Supply Maybe
P4 3.
MSI PT880 Neo M
1 Gig RA
Radeon 9800 X
SB live 5.
USB Modem
- 6
- Windows XP >> Uninstall X PI Have tried the command prompt and does not work. The
uninstall X P is not visible on the add or rem prog. I
have to get x p off my system!!!!!
- 7
- Windows XP MovieMaker >> no sound after burning dvdI just started using this program and i have saved my movie with sound to my
computer using the dv-avi option. When i used the click to dvd program that i
have there is no sound. what i did was pulled the video from my saved videos
and imported it to the click to dvd program burned the dvd but no sound was
on it. i am really excited about using this program. the movie looks great
but i would
love to be able to burn it and give it to my friend that the movie is about
(race car driving). I am really fustrated staying up all hours of the night
tryin to figure this out. Can somebody please help
- 8
- Windows XP Support >> Replacing that awful MS Sans Serif font!I just got a shiny new LCD monitor, turned on ClearType, and am living in a
world of crisp font goodness like I never thought possible.
All of this comes to a crashing halt when I look at some of the utilities I
use every day, like the K9 spam filter. These programs use the bitmapped "MS
Sans Serif" font, which looks HORRIBLE on my new screen. The small,
pixelated characters almost appear to have a white aura around them -- an
optical illusion which makes text very hard to read.
I did find references to the FontSubstitutes registry key, but "MS Shell
Dlg" is already pointing to the antialiased "Microsoft Sans Serif".
Is there something, anything, I can do to force Windows to use "Microsoft
Sans Serif" (which I assume has the same character set and widths as its
ugly cousin) instead of "MS Sans Serif"? Thanks!
- 9
- Windows XP Support >> Folder not displayed in Windows ExplorerI have a new notebook with Windows XP Media Center Edition SP2.
I have a folder called "HP Notebook" under the C drive that I created
last week and used to contain certain files from my old notebook
restored from an external HD using Windows Backup utility. Everything
worked fine last week.
I decided to delete everything under this folder and restore every
users documents and settings from the external HD (no system stuff).
The backup utility seemed to work OK and said it completed 14,000+
files.
When I looked for C:\HP Notebook using Windows Explorer, it was not
visible. However, if I search for a file that I know exists, the
results show "C:\HP Notebook\...directory path
further...\searchedfilename".
In Control Panel, I think I have everything set to display all folders
regardless of what they are (Hidden, System, etc.).
I'd like to delete this "hidden" folder. Can someone help?
Thanks,
Mike
- 10
- Windows XP Update >> update xpfurther to my answer to farshad I still have the problem that updates are not
installed to my computer. left next to the clock I more than once see a
yellow shield implicating that my machine is downloading updates, however
nothing happens. I have to get my updates from the update site manually.
- 11
- 12
- Windows XP >> CD writingI had trouble writing CDs using the windows software and so I followed
the suggestion of someone in this group and tried 2 freeware cd writng
programs. I do not get an error message but it still does not work.
I'd appreciate any further suggestions. Thanks
- 13
- Windows XP Support >> Most used documents.Anyone know a reason why I on occasion lose my list of recently used files
in EXCEL.
No recent changes made to press--not just compacted. Just used yesterday and
no list when opening today but it is listing those now used.
Asking here as MOST USED DOCUMENTS are common throughout MS programs under
FILE dropdown and they remained in Wopd.
Thanks
Mel
- 14
- Windows XP Network >> disconnectingalright ima do my best to give all the info on my situation as possible, if i
leave anythin important out just let me know....ok so i switched to netzero a
week or so ago and after i downloaded netzero's updates and tried to connect
again, the netzero box that comes up with the inbox, web, and options buttons
goes to open but then netzero disconnects. ive checked my event viewer after
this has happened but it hasnt flagged anything relevant, anything that
couldve been causing the problem in the even viewer turned out not to be the
cause when ive gone in and repaired it. its been a week straight now that ive
been torturing myself over this. any help would be GREATLY apreciated. thanks
in advance.
- 15
- Windows XP Setup >> Erro message trying to upgrade Win98SE to XP ProWhen trying to upgrade, the "Starting Setup" dialog appears for several
minutes. Then I get a blue screen saying the disc cannot be read. When I
eject it, I get an error message "d:I386\WINNT32A.DLL could not be loaded or
is corrupt"
I have cleaned the disk and it appears to work fine on another machine.
|
| Author |
Message |
williamwtii
|
 Posted: Fri Dec 26 22:31:59 CST 2003 |
Top |
Windows XP >> Can I install Microsoft Office 2000
In my old computer window 95 I had the software Microsoft
Office 2000, can I install it , in my new computer window
xp, are they comparable. Thanks for your help.
Windows XP912
|
| |
|
| |
|
Zap
|
| Posted: Fri Dec 26 22:31:59 CST 2003 |
Top |
Windows XP >> Can I install Microsoft Office 2000
Yes, I have it on mine and works great.
"Betty" <EMail@HideDomain.com> wrote in message
news:031701c3cc31$31730070$EMail@HideDomain.com...
> In my old computer window 95 I had the software Microsoft
> Office 2000, can I install it , in my new computer window
> xp, are they comparable. Thanks for your help.
|
| |
|
| |
|
Jim
|
| Posted: Fri Dec 26 22:29:30 CST 2003 |
Top |
Windows XP >> Can I install Microsoft Office 2000
Yes, but you will have to remove it from the old computer.
"Betty" <EMail@HideDomain.com> wrote in
message news:031701c3cc31$31730070$EMail@HideDomain.com...
| In my old computer window 95 I had the software Microsoft
| Office 2000, can I install it , in my new computer window
| xp, are they comparable. Thanks for your help.
|
| |
|
| |
|
NobodyMan
|
| Posted: Sat Dec 27 21:37:39 CST 2003 |
Top |
Windows XP >> Can I install Microsoft Office 2000
On Fri, 26 Dec 2003 20:23:35 -0800, "Betty"
<EMail@HideDomain.com> wrote:
>In my old computer window 95 I had the software Microsoft
>Office 2000, can I install it , in my new computer window
>xp, are they comparable. Thanks for your help.
Well, since your XP is an Operating System and your Office 2000 is a
suite of productivity applications, then no, they aren't comparable.
However, Office 2000 is COMPATABLE with the XP OS.
|
| |
|
| |
|
| |
|
Index ‹ Windows XP ‹ Windows XP |
- Next
- 1
- 2
- 3
- Windows XP >> Accessing localhost wants a passwordHi I was wondering if anybody has had this issue before.
I recently had a computer crash and lost my main drive so I had to reinstall
XP Pro
For school I must check my work with different browsers and the only one
that does not want a password is I.E. when accessing localhost. Did I miss
somthing in the reinstall.
This was never a problem before the crash.
- 4
- 5
- Windows XP >> !Perdita X. Dream/Nitt!If you've ever had your head ripped off by Perdita X. Dream/Nitt, Amethyst,
Cassandra or any other of her aliases, just forget about it. She is (as my
sig says), a self-righteous, ruthless net-cop. Now, I'm not saying that her
information is incorrect (and vise-versa), just that she tends to explode on
people a little too much. So just like in the real world, just ignore
people like them, (unless they are actually a cop :-P), make sure that you
are not actually doing something that is horribly wrong, and keep on typing.
BTW, you may find the below interesting:
OP:
my current win xp Pro user interface is in Lithuanian.
how can i change it to English please?
Me:
I heard something about a Multilingual User Interface component for Pro.
It's from MS, but I'm not sure if it's included in Pro.
PXD:
You are wrong (again!), no such thing exists. There is a MUI for Office
(applies to VL only) but not Windows.
Me:
Maybe you need to do a little research (again!)
http://www.microsoft.com/windowsxp/home/howtobuy/choosing2.asp
it's right down at the very bottom.
Please keep your rudeness and ignorance to yourself.
PXD:
That's for OL/VL only. This http://tinyurl.com/iz3k is a link to at least
three dozen people who agree with me. Guess I'm not the ignorant one, huh?
Me:
Hey ignoranus, thats not what you said. You said, "There is a MUI for Office
(applies to VL only) but not Windows."
It just goes to show, that having more than one opinion is important. It's
great that the OP didn't only hear PXD's 'expert' (her words not mine)
advice. And for someone with an English degree, you would think that she'd
read a little more carefully.
No doubt however, I will receive replies from PXD, Bruce Chambers, and a few
others, saying how I am a 'fuckwit', 'moron', or 'lazy cretin, but read this
for yourself, and make you're own decision.
--
Check out http://www.kellys-korner-xp.com for amazing tweaks and fixes
Member of "Newsgroups are for everyone" (Perdita X. Dream is a
self-righteous, ruthless net-cop too!)
Email address is fake to prevent SPAM.
Real email address is pcyr2000 AT hotmail DOT com
Change the obvious to the obvious.
------------------
- 6
- Windows XP Hardware >> Screen behavior or ?Hello Experts,
I'm facing a problem on my PC regarding my screen that flashing,
every 20-30 seconds screen blinks/flashes like doing some refreshing.
For example when open (from tray) the date & time properties (double
click on the clock):
1) picking another month from the combo box
2) waiting 30 seconds
3) automatically returns to current month (March '07)
This blinking is obvious anywhere in windows. Another example is that
the language indicator in taskbar, disappears and then appears again.
Finally, some times when working on MS Access 2003, I'm trying to copy
a value from the datasheet of the table and paste it somewhere else.
Copy fails in first or second time.
I think that some spyware might cause this, but I have installed
a good Anti-Spyware to protect my PC. Of course not all Anti-Spywares
protect us from all spywares. I always keep it up to date.
Can you please help me with that?
Hardware:
- MONITOR: SAMSUNG SyncMaster 173P (Intalled as Digital not Analog)
- RAM: GOLD OCZ (1GB)
- CPU: Intel Core 2 Duo 2,4GHz
- ATI Radeon X1650 (PCI Express)
- MOTHERBOARD: ASUS P5W DH DELUXE
- HDD: WESTERN DIGITAL SATA II
- EXTERNAL HDD: WESTERN DIGITAL MY BOOK ESSENTIAL (USB 2.0 ONLY)
Software installed in my PC:
- Windows XP SP2
- VNC Server 4.0
- SQL Server Developer Edition 2005 SP1 (Full)
- SQL Server Migration Assistant for Access
- MS Access 2003 SP2
- Office 2003 SP2
- IE 7
- Windows live messenger Ver. 8.1.0178.00
- Norton Antivirus 2006 Ver. 12.2.0.13
- Adobe Acrobat 6.0 Professional
- ATI Display Driver Ver. 8.342-070202a1-041238C-ATI
- DirectCD, InCD
- Google Earth
- 7
- Windows XP Setup >> OE removeing all attachmentsI am running into a constant problem with my OE in that
every attachment is being marked with the following
message "oe removed access to the following unsafe
attachments in your mail". I've turned every thing off
concerning email in my antivirus software and I've used
the 'help' in my OE (Outlook Express)but to no prevail.
Can anyone help me with this problem?
Thank you
Don
- 8
- Windows XP Setup >> explorer.exe not respondingI've recently had to repair my Windows XP and now have an annoying
"explorer.exe not responding" error whenever I log out or shut down, making
the process long and tedious (this wasn't present before the repair). Windows
appears to perform normally otherwise, so I'm assuming the error is something
to do with the re-installation. Anyone got any bright ideas?
Thanks in advance.
- 9
- Windows XP Setup >> can't get WinXPHome to renistall or recoverI added a NVidia AGP 4x video card. It worked but then in
certain applications the background went to black. I
tried to reboot the system but when it got to the WInXP
splashscreen with the green running indicators on it,
after a bit they stopped and a blue screen appeared
indicating a registry probem and that it couldn't load.
To goback and try safe mode, etc. For safe mode, safe
mode in command mode, restarting with most recent good
configuration, start in normal mode, all I got was the
starting windows splash and then the blue screen
indicating registery problem. I put in my XPHome cd and
booted from there and tried recovery but I got the blue
screen and it rebooted itself. I then tried the XP Home
install. The program started, went to the searching for
prior installation, then went to the registery problem
blue page. I will not let me reinstall because when it
searches for prior installations, it encounters a
registery problem. any help would be appreciated.
- 10
- Windows XP >> Local folder mapped as network drive goes away if no network device activeWe have a rather unusual requirement to map a folder on a
local drive as a network drive in order to give it a
different drive letter. We are doing this on a stand alone
PC for the sake of consistency for a specific appication
with others in a network that it ocassionally VPN's into
via a dial-up connection.
The mapping solution works well EXCEPT that the mapped
drive is unavailable if there is no active network device
installed in the PC. We discovered this when we removed a
wireless PC card from it and could no longer access the
mapped drive. We are mapping a folder on the c: drive as
the T: drive. There is also a NIC but it is unplugged.
Is there some way to keep the mapped drive active? Is
there another way to get a T: drive on the HD. The free
space on the HD is fully allocated to C.
TIA,
Ken
- 11
- Windows XP Setup >> Error message when deleting partitionHi there
I have Win 98 and Win 2000 on the system. I want to delete
them both and install win XP PRO, but when i get to the
screen where i can delete the selected partition and
press "D" to delete it the following error message comes
up: " Setup is unable 2 perform requested operation on the
selected partition. This partition contains setup files
that are required to complete the installation."
Please help me
I want to delete the other OS before installing Win XP Pro
and not an upgrade.
- 12
- Windows XP Setup >> XP setup failureI just installed a new Intel motherboard (D875PBZ) and P4
processor, with 2 256 dimms (333--these are the correct
dimms for this P4), and I can access the bios, but when I
start the xp install, I get to the agreement page, press
f8 to install, then I get the following error message:
PAGE_FAULT_IN_NONPAGED_AREA
STOP: 0X00000050 (0XC2F00000, 0X00000000, 0X809013D1,
0X00000000)
I have read the Microsoft Knowledge Base article re:
0x00000050 stop errors, and I have switched the dimms,
but that has not helped. I cannot access the cached
settings in the bios--there doesn't seem to be a way to
do this in this particular bios. Can't get to a dos
prompt, either, with Fix-It Utilities.
Any suggestions??? Thanks in advance.
- 13
- Windows XP Perform Maintain >> Problem with installing an updateHello!
My computer automatically downloads updates from
Microsoft. For the past month, it downloads an update,
but I am unable to install it because I am getting the
following error:
"MDAC Hotfix Installer has encountered a problem and
needs to close."
There is a link to the following Microsoft Knowledge Base
Article:
http://support.microsoft.com/?kbid=837188
Under "Resolution", it says to "Delete the Dahotfix.log
from the C:\WINDOWS folder or the C:\WINNT folder." I am
unable to find this file!
Thanks ahead of time!
Kevin Snow
- 14
- 15
- Windows XP Setup >> Changing the Date formatI am doing an unattended instalaltion of XP I am also using sysprep.inf for
the ansers. When I havbe set the date correctly in the OS to MM-DD-YYYY and
run sysprep it does not save the changes but reverts back to the US standard
of DD-MM-YYYY. Here are the settings I have used in my sysprep.inf file. Can
someone tell me how to fix it please?
[RegionalSettings]
LanguageGroup=1
Language=1409
UserLocale=1409
Thanks in advance.
|
|
|