| Problem with reopening projects |
|
 |
Index ‹ Windows XP ‹ Windows XP MovieMaker
|
- Previous
- 1
- Windows XP Network >> Lost networking to other computersTwice this has happened to me. The first time I fixed it
I had to completely reformat and reinstall Windows (not
for this reason). What has happened is that I have a
good networking connection with my two other computers in
my home, hooked up with a router via cable modem, and
within a month, I lose the networking and only get my own
computer listed in My Network. The router and printer is
running off an old P III 400 Mhz Windows 98 computer.
The two remote computers still have printer through this
network, but not able to share files.
Thanks,
CB
- 2
- Windows XP >> Disable firewallI need to temporarily disable my xp firewall so that I can program a microsoft wireless base station. How do I do this. The help on xp does no good.
- 3
- Windows XP Support >> Help Deleting a Corrupt FileSomewhere along the line a corrupt restore was created. I noticed this when
a Defrag failed, specifying the restore point folder as the cause. I have
narrowed it down to a file in one of the sub-folders. I can't find a way to
delete it. It always tells me the file is corrupt. I have tried :
- Turning restore on and off. All restores deleted except this corrupt
folder.
- Overwriting the offending files with an empty notepad file
- Trying to delete with explorer.exe off
- Using a data cleaning tool
I could really do without reinstalling Windows. Any help very gratefully
received
Many thanks
M
- 4
- Windows XP Perform Maintain >> Puzzled about laptop power schemes settings...Hi, All,
I am using a Dell Inspiron 5150 laptop, 3.06GHz HT, 1.25G RAM, WinXP.
I have only rarely used my laptop on battery power, and then for short
periods of time, so I have never paid attention to the Power Management
settings.
I have always had my power scheme set to "Maximum Performance" (Dell's
version of "Minimal Power Management"), with no problems.
I will be needing to use my laptop on battery power fairly frequently in the
near future, so I am trying to learn a bit about the Power Management
settings, so I can choose (or configure) the best scheme for me.
I do understand the various settings and options available under the Power
Options Properties, including the integral control of the SpeedStep processor
settings. The default settings for each of the available "schemes" basically
seem logical, BUT...
I have noticed one thing that has me really confused:
I was comparing the default settings for "Running on batteries" for the
various schemes, and all but one of the themes available for my machine shows
a shorter time set to enter "System standby" than for "Turn off hard disks"!
For instance, on my machine the default values for Battery operation are:
Under the "Maximum Performance" scheme, Turn off HD is set to 15 min. and
Standby is set to 5 min.
Under the "Portable/Laptop" scheme, Turn off HD is set to 30 min. and
Standby is set to 25 min.
Under the "Home/Office Desk" scheme, Turn off HD is set to 10 min. and
Standby is set to 5 min.
Under the "Minimum Power Management" scheme, Turn off HD is set to 15 min.
and Standby is set to 5 min.
I THOUGHT I understood what the standby function was all about. Now I'm not
so sure!
What has me confused is: WHY set the time to enter standby SHORTER than the
time to simply stop the disk?
It seems logical to me that the sequence should be display off, then disk
off, then standby, then hibernate. BUT all but one of the ten factory default
power schemes for battery operation on my laptop are set so that the standby
time is SHORTER than the disk off time!
My questions:
1) Why should the system be set to enter standby sooner than turning off the
disk?
2) Shouldn't the system turn off the hard drive automatically upon entering
standby mode?
3) Under what circumstances would the standby mode be bypassed in favor of
simply turning off the disk?
Thanks for any comments or advice. I realy want to understand this!
Ken
- 5
- Windows XP Setup >> disk wizardAnyone know where I can get a copy of Seagate's DiscWizard?
I'm trying to load a Seagate SP1604N H/D (two 50% partions) and It is
failing on missing hal.dll.
(DDO problem?)
Regards
TWK
- 6
- Windows XP >> printing labels in Word 2002I have created a mail merge from a Word document to create labels. When I
try to print, they are not there, even though I can see them on the screen.
When I go to print preview there is nothing there. Am I doing something
wrong, or do I have a fault - and if so how do I fix it?
--
Alison Voluntary Church Administrator
- 7
- 8
- Windows XP >> XP installation hanging on installing networki have tried on numerous occassions to install XP home, yet on 32 minutes the program
gets to a third of the way through "installing network" and hangs, without crashing.
i do not have a network card. the only PCI card is my modem, which i have removed
with the same problem. any suggestions PLEASE HELP!!
- 9
- Windows XP Support >> IE help pleaseI have IE 6 xp home with sp1 and 2. Also google tool bar installed.
When browsing I sometimes get a smaller window web page open with extra info
on it. This page won't expand by dragging the corners and the little
maximise square is greyed out. The window is full of info that is much too
big to be read in this small window, so I can't read all of it. How can I
expand this window so I can read the whole page?
Is it something that I have on my laptop or some sort of setting that is
preventing me from viewing the page properly?
Many thanks for any help.
If this is the wrong news group, please can someone give me the correct name
of the right news group so I can post my problem there.
Thanks again
Katie
- 10
- Windows XP >> Replacement diskDoes anyone know how to go about getting a replacement
disk for XP? In a recent move I broke mine and need it to
reinstall some programs.
- 11
- 12
- Windows XP Hardware >> HELP! my hard drive formatting not stickingthought the 2 partitions on my new hard drive got
formatted cause I "tested" by copying some file to both
partitions and saw them on BOTH partitions and observed
when clicked "Propertie" for BOTH, saw tabs called
(1) "Sharing" & (2) "Quota", whatever those
are/significance, I don't know yet/understand. Then
proceeded to rename BOTH, also in the "Properties dialog
box" (the names that the partitioning AND formatting
program gave the 2 partitions were generic-sounding names
(like DRIVE2Vol#1 & DRIVE2Vol2, cause I hooked it up as
an INTERNAL drive to a computer running WinXP Home
Edition SP1. The new drive was the only hard drive other
than the other drive that's already in the computer
running as the bootup drive (in
other words, I hooked it up on the same cable as the
bootup drive, using the spare connector that was hanging
off of the cable...so I jumpered the new drive as a SLAVE
drive (in a 2 drives on 1 cable, which presumably is the
PRIMARY channel cable)).
Thinking I liked what I saw, I turned off PC, removed
hard drive, jumpered it as a "SINGLE" drive by removing
the jumper-thingy and put it in my EXTERNAL case that has
BOTH FireWire/USB 2.0 interfaces and hooked it back to
the same WinXP computer I used to format it, except this
time using USB. Turned it on after the computer, ONLY 1
partition is usable, by which I mean
(1) the "DRIVE2Vol2" lost that name and now takes on yet
still another generic-sounding name "Local Disk" and when
I
(2) clicked "Properties" for the partition that lost its
name, the 2 previously observed tabs above are not there
anymore, and
(3) when I double clicked on it to find the files I
copied to it when it was an INTERNAL drive, those files
weren't there and Windows asked me if I "wanted to format
the drive?" I'm not sure if I should click "Yes" button
to format it or not........thus I'm here in this forum
(AND I THOUGHT THE ABOVE MENTIONED PARTITIONING &
FORMATTING SOFTWARE THAT COMES WITH THE DRIVE SHOULD HAVE
FORMATTED IT--ALREADY!!!)
Now for some details, the HD is a WD 250GB Caviar and the
software that came with it is WD Data Lifeguard Tool
v11.0 version for Windows (vs. for DOS). I partitioned 2
equal partitions. The sizes shown before I removed it to
make into EXTERNAL HD were 116GB x 2 (BTW, should I have
only this much GB as usable after formatting?
18GB "lost", not usable for my own data? Is this
common?). When it's an EXternal drive, only 1 partitions
of 116GB shows up......the other "missing" asks if I want
to format it? HEEEEEEEEELP please!!!! Thank you! (Oh,
BTW, the SW asked me if I wanted to use the drive
as "additional data drive" or "a bootable drive"....or
something along those lines. I elected to use "additional
data drive".)
- 13
- Windows XP MovieMaker >> Movie Maker closes when I try to add to TimelineI'm running WMM 2.1 on XP
I've been making a home movie using jpg's and wma files, and everything was
fine. Now, when i try to add anything to the timeline, WMM just closes, with
no error message - it just goes away !!
I've experimented by setting up a new dummy project and dragging jpg's down
to the timeline. On the 22nd one, the same thing happened. I reopened the
project i'm working on and counted the items on the timeline, and it was
21...... so it would seem the 22nd item will always cause this to happen !!!
Any help would be appreciated
- 14
- Windows XP >> new computerI bought a laptop with xp home on it and the former owners name is the
administrator can I change the name to me some way?
without losing everything on the system from a new install?
- 15
- Windows XP Perform Maintain >> Defragmentation?Recently I've noticed when I run the Xp defragmentation program an additional
message appears. The message states the usual defragmentation is complete but
also states that some files couldn't be defragmentated and to check the
report for these files. When I do check the report I don't see any files
listed in the table of fragmentated files. Is this a problem?
|
| Author |
Message |
Stryed
|
 Posted: Tue Oct 09 04:38:33 PDT 2007 |
Top |
Windows XP MovieMaker >> Problem with reopening projects
After saving my project and closing MM, when I reopen the project the time
line appears with all the content but the preview won't work. There seems to
be a problem with one of the transitions and it's not always the same one. I
have to find it by process of elimination. I adjust the offending transition
and all of a sudden preview starts working again. The problem reoccurs each
time I reopen the project. It's quite annoying.
Windows XP1260
|
| |
|
| |
|
Graham
|
| Posted: Tue Oct 09 04:38:33 PDT 2007 |
Top |
Windows XP MovieMaker >> Problem with reopening projects
What files do you have in your project?
This may help..
http://www.myvideoproblems.com/Tutorials/MovieMaker/File_type_compatibility.htm
--
Graham Hughes
MVP Digital Media
www.myvideoproblems.com
"shamus" <EMail@HideDomain.com> wrote in message
news:EMail@HideDomain.com...
> After saving my project and closing MM, when I reopen the project the time
> line appears with all the content but the preview won't work. There seems
> to
> be a problem with one of the transitions and it's not always the same one.
> I
> have to find it by process of elimination. I adjust the offending
> transition
> and all of a sudden preview starts working again. The problem reoccurs
> each
> time I reopen the project. It's quite annoying.
|
| |
|
| |
|
| |
|
Index ‹ Windows XP ‹ Windows XP MovieMaker |
- Next
- 1
- 2
- Windows XP Support >> code 39this is what i get:
Windows cannot load the device driver for this hardware. The driver may be
corrupted or missing. (Code 39)
don't know how it happened (not roxio), does anyone know how to fix it? I've
tried uninstalling and reinstalling and regedt32.exe - bot havent worked
- 3
- Windows XP >> windows updateI have just re-installed windows xp and now find that
windows update does not function. I can access the web
site, it scans my pc, provides a list of updates to
install, starts to download then stops and tells me the
installation was unsuccessful. Any ideas?
Hank
- 4
- Windows XP Security >> Managing certificatesHy all,
In my compagny more and more external certificates are used. The
certificates are mannualy installed on the users pc. When the pc or profile
of the user is replaced the certificate is mostly forgotten.
My question is, is there an easye methode for centrally managing certificates?
Matrtijn
- 5
- Windows XP Setup >> Great computer help siteafirsttimecomputeruser@groups.msn.com
This is a super msn group I belong to,full of help &
fun,for New computer users to Experts,no question is too
dumb I found out,lol, yet my boyfriend is a Tec & he goes
there. Fast responce time too.I like to pass on good
places I go to,enjoy
- 6
- Windows XP Network >> Lan connection statusI don't seem to be able to use my Lan connection at all.
I still have a wireless connection that works and in the
connection status it shows packets sent but not recieved.
It also shows status is connected. Any suggestions on how
to recieve?
Thanks
- 7
- Windows XP >> MS ConfigUnder System Configuration Utility under the startup and Command tabs, I
have check marks but it's blank under Startup item or Command tabs. There is
a Location listed but it's the same as the one above it. Is it OK to uncheck
the checkmarks or just leave it alone?
- 8
- Windows XP >> Fax Console Crashes when closingMy Fax Console Crashes only upon closing it---but only on
one of the two accounts on the computer. I get the blue
screen that says at the top "Page Fault in Non-Paged
area", then it dumps the memory to disk, and counts down
and then reboots back up just fine. I tried uninstalling
and re-installing the Windows component, and that didn't
help---even caused some problems. After it boots up, it
prompts to report the crash to MS, and goes to Online
Crash ANalysis where I get the report "Error Caused by
Device Driver." Can anyone tell me how I can solve this
problem please?? Thank you very much!
- 9
- Windows XP >> hangingNorton quarantined an infected file on my system
(MSinfo.exe). Now I cannot open any files contained in
any shared or common folders and my computer just hangs.
It requires a re-boot everytime to recover. I've tried
everything I can think of and I need help! Thanks
- 10
- Windows XP >> Application Popup Event 26I have Windows XP Professional Service Pack 1 running on
an IBM Thinkpad T30. Recently, I began seeing
Application Popup events (Event 26). The message text
is "Application popup: Windows - System Error :
Insufficient system resources exist to complete the API."
I see this in two circumstances: When I attempt to
hibernate and (multiple times) when I resume after
Standby. Looking at the Event Viewer, I can see that the
event is issued every five minutes during the stand by
period.
The only change I can remember making just before this
started happening was to add 512m of RAM to bring the
total up to 1G.
Tom
- 11
- 12
- Windows XP Basic >> Menus missing in explorerHow can I get back my menus in windows explorer? Not sure how they went
missing, but I'm blaming the kids! I'm talking about the top drop down menus
- File, Edit, etc... I've tried right-clicking around the place but can see
no way of getting these back. Please help. Paul.
- 13
- 14
- Windows XP Perform Maintain >> cannot open task manger regedithii,
i have an problem with my pc.
i have got a sort of a malware through the net
it doesnot allow me to start task manger or open the registry
but when i do the same in safe mode i am able to start task manger
registry.
when i type cmd in run it itsays that cmd is not a valid win32
applocation.
i have scanned for viruses in the safe mode and removed many of them
but couldnot fix this problem..
please help me out...
- 15
- Windows XP Perform Maintain >> saving filesI don't know why windows makers have made my music and my pictures folder.
is it worth to save pictures and music in these folders, does saving files
in the same directory
of operating system makes system slower.
Please suggest, the best place for saving music and photo whether in these
folders
or in some separate partition.
|
|
|