| SFC SCANNOW - System File Check Problem |
|
 |
Index ‹ Windows XP ‹ Windows XP Perform Maintain
|
- Previous
- 1
- Windows XP Setup >> What could my problem be?I don't know much about computers, what could the
problem be if my computer seems to just freeze up
sometimes? The mouse does not seem to respond, it's not
batteries in mouse, this happens at least once a day, I
can press Ctrl,Alt Delete and still no response, Escape
does not help either, the only thing I can do is reboot
and I don't think that can be good.
Would this be a problem with the software or the computer
itself? What can I do to keep this from happening?
Any help would be appreciated?
- 2
- Windows XP Support >> Standby/HibernateI have tried to reinstate my Hibernate action when I close the lid on my
laptop. For some reason it was de-activated and will not activate when I
apply it in the Power Settings, advanced. Can anyone tell me where I have to
go to correct this?
Also, my Standby button is not an option when I shut down. This all
occurred after I installed a new printer. What did I do wrong?
--
Slow But Thorough
- 3
- Windows XP Hardware >> pc problemhi i hope u can help me i put a new 40gig harddrive in my
pc and now it freezes up all the time can,u please shed
some light on what may be causing the problem. thank you
donna king
- 4
- Windows XP Support >> can't remove from Add/Remove ProgramsNorton Antivirus delete a Trojan horse and after that was unable to scan . So
I decided to uninstall from Add\remove Programs in Control Panel . The
program was removed partially because of some error .So I installed the
program once again in order to remove it afterwards , but the installation
failed to complete popping up the message ," Realtime protection system
unable to install " . I'm sure the Trojan horse deleted but the problem
remained. How can I remove the Norton Antivirus from Control Panel ? Now I'm
using AVG -Antivirus Free Edition.
--
thanks in advance , Babis
- 5
- Windows XP Security >> IIS & Windows components installI'm a formerly licensed MSDN developer and I'm trying to install iis and
a few other components on my new machine. I've installed sp2 from the ms
website, but the component installer wants me to find my sp2 cd's. Since
I never had them, what should I do?
-Lew
- 6
- Windows XP Hardware >> XP pro detects dual processors...I've just built this CPU from scratch which includes an
Intel P4 3.06Ghz CPU w/ Hyper Threading. The system runs
on an 800mhz FSB, with 1536mb of PC3200 DDR RAM. Oddly
enough, the OS and several apps show that it has 2
processors. Is there a reason for this? I'm certain it
won't affect performance, I was just wondering why it
would do that.
- 7
- Windows XP >> not a valid windows 32 applicationis there a place of how to resolve this error problem.
I've been trying to download internet call waiting (thru
call wave) and halfway thru I get either an IE5/ZJBUIMLN
or IE5/IJKL4567 not a valid windows 32 appl.
- 8
- Windows XP Setup >> My documents copied to second hard driveHi,
Last week I found my hard drive quickly failing and I was too dumb to have
backups.
I went out & bought two hard drives. Installed one of the new ones as a
slave and copied everything on my failing C: to the new drive (F:).
I then replaced the failed C: with a new drive and installed windows xp home
on that one. Upgraded to SP2 and all the other updates that were suggested.
When I try to move the F:\my documents folder (this is the copy from the
failed drive) onto my new C: I get a "Can't access. Check if drive write
protected or full" error message. I can't open any of the documents or
pictures either. I can't copy them from the old F:\ my doc folder to any
other place on the F:. Basically I can't do anything with them but I'm not
convinced they're corrupted. I think it has something to do with being in My
docs and the fact that I no longer boot windows from that drive.
Any suggestions?
Thanks,
Brian
- 9
- Windows XP Security >> unlocking a folderI had to reinstall my OS but I saved my docs folder but
am unable to open because of it being pasword protected.
I know the password but have no way of accessing a login
for the folder. Any help would be appreciated.
- 10
- Windows XP Network >> System ShutdownI keep getting shutdown while on the web. A window pops
up and says "SYSTEM SHUTDOWN" Then "NT AUTHORITY\SYSTEM",
and then RPC terminated "REMOTE PROCEDURE CALL". Cant
stay on the internet long enough to figure out the issue.
This usually happens about 3-5 minutes into the session.
Any help would be greatly desired.
- 11
- Windows XP MovieMaker >> Using effects makes my WMM close immediatelyEverything works very well up till I try to tell it to make this one clip
fade to black. The program closes immediately, and without notice. No
notification of any kind. Just *pfft* and it's gone. I tried again, but all
effects and transitions cause it to close abruptly and without warning. So,
I'm left sitting here, a look of "wtf?!" on my face. I've downloaded that
Plus! pack thing, I've gotten all updates, I THINK I downloaded the service
pack 2, but I didn't see it anywhere... I would be much obliged if someone
were to help me solve this problem.
Danke,
Adam
- 12
- Windows XP Network >> JIT DebuggingID3 Tag-It, and ID3 labeling program was working well then something changed
and Microsoft .NET Framework began giving the warning that the program was
trying to perform and operation not allowed and needed a SecurityException.
In the details MS .NET Framework suggested to enable JIT Debugging.
"To enable just in time (JIT) debugging the config file for this application
or machine (machine.config) must have the jitDebugging value set in the
system.windows.forms section. The application must also be compiled with
debugging enabled."
"For example:
</configuration>
<system.windows.forms jit Debugging="true/>
</configuration>"
"When JIT debugging is enabled, any unhandled exception will be sent to the
JIT debugger registered on the machine rather that being handled by this
dialog."
I did get the jit Debugging="true" done, which apparently didn't help.
I tried to read what Microsoft.com had about JIT Debugging in the help
section here, but it's just way too complicated.
1. "The application must be compiled with debugging enabled." Is it
referring to the ID3 Tag-It program I was trying to run? Can you just take a
program and compile it to enable debugging?
2. I now get the message that there is no JIT debugger registered. How do
you register a debugging program? Where do you get the debugger. I think
one debugger is associated with Visual Basic.
JIT Debugging must be pretty complicated. The various internet forums don't
seem to know what's going on. Could someone offer a not too technical
explanation about what is going on and maybe baby step me through a solution
to register and enable JIT Debugging? Thanks
- 13
- Windows XP >> Increased RAMI am going to increase my RAM to its maximum, however I have forgotten what
type i have previously installed. Is there any way i can get a readout of
the amount, type, speed etc of the RAM i have installed on my PC
- 14
- Windows XP Support >> Problems with Freezing EtcCould someone please explain this to me in PLAIN english.This is my error log
message
The nVidia WDM Video Capture (universal) service failed to start due to the
following error. The service cannot be started, either because it is disabled
or because it has no enabled devices associated with it.
My computer keeps closing down or freezing and it's driving me to dispair
Appreciate any help Many thanks SHA
--
Sha
- 15
- Windows XP >> ATI T200 Unified AVStream cannot startATI T200 Unified AVStream cannot start in Win XP 32 bit SP2 (SP3 RC) and
Vista 32 bit try to reinstall, use another drivers and nothing.
http://img156.imageshack.us/img156/9801/atit200unifiedavstreamdub8.jpg
My PC:
Intel Pentium 4 (640) 3200@3525Mhz
Abit i945P (AL8-V) (Bios date: 2006/07/07)
1 Gb DDR2 533Mhz dual channel (A-DATA)(2 x 512Mb)
Palit ATI/AMD Radeon HD 2900 XT 512Mb GDDR3 512bit
SAMSUMG 160 Gb SATA 2
LiteOn DVD+/-RW
PSU Chieftec 550W 12cm Fan PFC
|
| Author |
Message |
anonymous
|
 Posted: Fri Dec 15 07:27:24 CST 2006 |
Top |
Windows XP Perform Maintain >> SFC SCANNOW - System File Check Problem
Often when i run SFC /SCANNOW in
pc with WIN XP HOME, usually i get the
error:
Wrong CD or similar. if i click DETAILS it tells:
"cd unit errors or windows 2000 insered disk)
1) windows xp home is updated to sp2 + updates
2) from dos using ver i get build 2600
3) i tried to edit the registry to get the sourcepath in c:\i386 avoiding
the CD reading error
something has the same problem?
Some solution?
Windows XP1
|
| |
|
| |
|
Mike
|
| Posted: Fri Dec 15 07:27:24 CST 2006 |
Top |
Windows XP Perform Maintain >> SFC SCANNOW - System File Check Problem
Go through the registry editing process according to this website
http://www.updatexp.com/scannow-sfc.html
It does work..
"DUN1" <EMail@HideDomain.com> wrote in message
news:O$EMail@HideDomain.com...
> Often when i run SFC /SCANNOW in
> pc with WIN XP HOME, usually i get the
> error:
>
> Wrong CD or similar. if i click DETAILS it tells:
> "cd unit errors or windows 2000 insered disk)
>
> 1) windows xp home is updated to sp2 + updates
> 2) from dos using ver i get build 2600
> 3) i tried to edit the registry to get the sourcepath in c:\i386 avoiding
> the CD reading error
>
> something has the same problem?
> Some solution?
>
>
|
| |
|
| |
|
| |
|
Index ‹ Windows XP ‹ Windows XP Perform Maintain |
- Next
- 1
- Windows XP Update >> Windows XP Service Pack 3Automatic updates ready to install for Service Pack 3. I didn't find any
Service Pack 3 for Windows XP on this website. I found it for Windows 2000
though. Should I install this update ?
Thanks,
Samwise
- 2
- Windows XP >> strange result on google searchI couldn't find an IE7 forum, hope this question is okay here.
I have Search Google as my default. When I use the google search, no matter
what I type in the box on the toolbar, it returns a search %s. I am using IE7.
You know, when you search using the toolbar box, there is a box and a little
magnifying glass. Then, the search result on the screen and another search
box that you can use. It is THAT box that has a %s in it and the results of
the search always starts with the Wikipedea definition of S
Is there something I can change? I've looked in Internet Options and don't
see anything. In the "change search defaults" under settings listed are 2
Googles and a Search Google (default). I am a novice.
- 3
- Windows XP Hardware >> intalling winxp proi cant install winxp pro.
there is always an error occuring like
non_page defualt....
with a blue background color asking to
change my settings on caching and shadowing.
my motherboard is k7ama3.
with amd athlonXP 2000+.
with geforce4 mx440 agp8x.
i dont know what the problem is.
- 4
- Windows XP Setup >> Applications available to all usersHi
I have just installed xp and I am having problems making
programs available to all users.
I have made each member of the family a user of our pc
with the children being limited users.
When I install a program ( I am an administrator) it
doesn't seem to make the program available to the others.
Is there a way I can inform " XP " that I want the
program to be available for all ( or for that fact just
selected users)? I can't seem to find any info on this
part.
Thanks
PD
- 5
- 6
- Windows XP MovieMaker >> Windows Movie MakerMy MM has worked perfectly in the past.
Now, when I attempt to import a video I receive the error message "COULD NOT
BE IMPORTED. UNSPECIFIED ERROR"
The error affects all files including Windows Media Audio/Video, MPEG etc.
If MM has been corrupted can it be reinstalled?
--
Bri
- 7
- 8
- Windows XP Network >> question in folder sharing in winxpI can only set to share folder for network user to access, but without any
password protection, even win95/98 can set a password, why winxp has not such
function???
or just I don't know how to do ???
my environment is winxp (prof ver) in FAT32 file system.
Appreciate for any advice !!!!
- 9
- Windows XP Security >> Locked-Out Documents?I recently had to reinstall my copy of windows due to a
file corruption, but luckily enough my personal files
weren't deleted. However, although I log in with the same
account name and password and such (the profiles were not
saved) I cannot access my old files whatsoever. Is there
an administrator's utility that allows me to bypass this?
I do realize that the privacy option for one's documents
was created to prevent people from accessing them in the
first place, but I have crucial file for my workplace in
there!!
-Anxious
- 10
- Windows XP Perform Maintain >> Disk DefragmenterI have installed the SP2 update and, so far, can no longer perform a disk
defragmentation.
When I run the program I get an error message stating:
MMC failed to initialize because it was installed incorrectly or because a
portion of the registry has become corrupted. Make sure the file Mmcndmgr.dll
is registered and running "regsvr32 %SystemRoot%\System32\mmcndmgr.dll".
I then go to Run and type:
regsvr32 %SystemRoot%\System32\mmcndmgr.dll
And I receive another error message stating:
"C:\WINDOWS\System32\mmcndmgr.dll" is not an executable file and no
registration helper is re registered for this file type.
The mmcndmgr.dll file does exist in the System32 folder. Can anyone help me
fix this problem and get my Disk Defragmenter to work again? If it's a
registry problem, where in the registry would I fix it and how? Or how would
I go re-installing the program if thats even possible?
Any help would be greatly appreciated!
- 11
- Windows XP Update >> Internet Explorer Script ErrorI am having problems printing web pages and getting the following message;
'An error has occurred in th script on this page'
Line 93
Char 1
Error Access is denied
Code 0
URL res//c:\windows\system 32 etc
Can anyone please advise how I cure this new problem.
Thanks
Rob
- 12
- Windows XP >> Password requested at front screen, but never set one up...I reimaged the laptop 3 times and everytime it prompts me for a password at
the log-in screen. I never set up a password. I tried logging in Safe Mode
and the administrator password is not "blank" as stated in another article.
I get the following error "The system cannot log you on due to the following
error: The specified domain either does not exist or could not be contacted".
What is this referring to???
Help in PA.
- 13
- Windows XP >> Windows Xp reboots like some one has pushed RESET buttonSir plz help me because i am having a problem that while
i m connected to internet my computer restarts by
itself.Its like some one has pushed reset button.Its not
blaster worm bcoz in that computer shutsdown after 60
seconds but in this case computerresets and restarts it
self without loging off.
"After the computer again starts a message
appears "Windows HAs REcovered a serious ERROR:"
"BCCode:a BCP1 : 00000016 BCP2:00000002 BCP3:00000000
BCP4:804ef776 OSVer:5_1_2600 SP:0_0 Product:256_1"
"following files will be included in error report :
C:\WINDOWS|Minidump\Mini111303-01.dmp
C:\DOCUME~1\tayyab\LOCALS~1\Temp\WER1.tmp.dir00
\sysdata.xml"
i live in pakistan here many other users are also
facing this problem in windows xp professional. plz help
me and provide me its solution .i got this help address
for support but if u r not this problem solver than plz
formard it to the "Microsoft WINDOWS Xp Problem solver"
- 14
- Windows XP Setup >> product id?I'm on different computer right now. But anyway, I just bought a laptop and Windows XP Home Edition. When I was installing Windows XP, it asked me for the product code thing. I looked all over and couldn't find it. Should I call Windows and tell them? Or is there an unversal code or something?
- 15
- Windows XP Setup >> Repair Install> Lost Documents and SettingsA friend's computer was not booting into Windows, so I ran chkdsk from the
recovery console, restored NTFS.SYS from the CD. (as it was not found on
startup) Windows got to the end of the startup logo, then rebooted. I
resorted to attempting a Repair Install from the CD, not realizing that there
is a potential for data loss in the Documents and Settings directory. I've
done repair installs on my own systems in the past without any problems.
Everything went smoothly until the system booted up, I logged in, and
discovered that all of the important files I was trying to preserve are gone.
Windows recreated all of the users, but everything inside their home
directories is the installation default. The start menu has also been
reverted to the installation default (obviously as it is in the All Users
directory) Has anyone had experience recovering this data in any way? Help!
Thanks,
Reid
|
|
|